Long-Term Adult Population Fluctuations and Distribution of the Spot, Leiostomus xanthurus, in Mississippi

Adult specimens of the spot. Leiostomus xanthurus, were collected from bayou, Mississippi Sound, and barrier island locations along the Gulf Coast of Mississippi from November 1982 to July 1989. 7he mean total length of all spot sampled in comparable gill net sets was 219 mm (± 14 standard deviation, n=4,338). Ninety-five percent of the spot were collected in the island and sound areas, where the salinity was higher than in the bayous. Catch per unit effort was high at island and sound stations in spring and autumn, with relatively few fish caught during the winter spawning season and summer. The relatively high frequency of spot observed at the island stations in the autumn was probably influenced by spawning migrations, and the high spring values may represent a combination of two abundant year classes. The two greatest yearly collections, in 1983 and 1986, may have been influenced by sampling conditions or by environmental conditions favorable to survival either during those years or earlier when those fish were postlarvae. The smallest yearly catch occurred in 1985 and may have reflected the harsh weather conditions that year.

A method to investigate the shrinkage stress developed by resin-composites bonded to a single flat surface

Objectives. To purpose a method for predicting the shrinkage stress development in the adhesive layer of resin-composite cylinders that shrink bonded to a single flat surface, by measuring the deflection of a glass coverslip caused by the shrinkage of the bonded cylinders. The correlation between the volume of the bonded resin-composite and the stress-peak was also investigated. Methods. A glass coverslip deflection caused by the shrinkage of a bonded resin-composite cylinder (diameter: d = 8 mm, 4 mm, or 2 mm, height: h = 4 mm, 2 mm, 1 mm, or 0.5 mm) was measured, and the same set-up was simulated by finite element analysis (3D-FEA). Stresses generated in the adhesive layer were plotted versus two geometric variables of the resin-composite cylinder (C-Factor and volume) to verify the existence of correlations between them and stresses. Results. The FEA models were validated. A significant correlation (p < 0.01, Pearson's test) between the stress-peak and the coverslip deflection when the resin-composites were grouped by diameter was found for diameters of 2 and 4 mm. The stress-peak of the whole set of data showed a logarithmic correlation with the bonded resin-composite volume (p < 0.001, Pearson's test), but did not correlate with the C-Factor. Significance. The described method should be considered for standardizing the stress generated by the shrinkage of resin-composite blocks bonded to a single flat surface. (C) 2012 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Twinlike models for kinks and compactons in flat and warped spacetime

This work deals with the presence of twinlike models in scalar field theories. We show how to build distinct scalar field theories having the same extended solution, with the same energy density and linear stability. Here, however, we start from a given but generalized scalar field theory, and we construct the corresponding twin model, which also engenders generalized dynamics. We investigate how the twinlike models arise in both flat and curved spacetimes. In the curved spacetime, we consider a braneworld model with the warp factor controlling the spacetime geometry with a single extra dimension of infinite extent. In particular, we study linear stability in both flat and curved spacetimes, and in the case of curved spacetime-in both the gravity and the scalar field sectors-for the two braneworld models. DOI: 10.1103/PhysRevD.86.125021

Film based on Y2O3: Eu3+ (5 mol% of Eu3+) for flat panel display

This paper reports on Y2O3:Eu3+ containing 1 mol% of Ag-0 nanoparticle films recovered with a SiO2 layer by using glass foil as a substrate for a possible optical display device application. The obtained film showed an intense emission at 612 nm due to the Eu3+ 5D0 -> F-7(2) hypersensitive transition, a high transmittance in that emission range, an excellent optical quality, and a high absorption only below 300 nm. Moreover, despite the presence of the SiO2 layer used to improve the phosphor adhesion on Corning (R) foil substrates, the intensity ratios between the emissions assigned to Eu3+ D-5(0) -> F-7(2) (dipole electric transition) and D-5(0) -> F-7(1) (dipole magnetic transition) were not affected by it. The x and y coordinate values found in the 1931 Commission Internationale de l'Eclairage Chromaticity Diagram for this film reveal that it has a suitable pure red color emission for optical displays devices. (C) 2012 Elsevier B. V. All rights reserved.

Mapping of angular leaf spot resistance QTL in common bean (Phaseolus vulgaris L.) under different environments

Background: Common bean (Phaseolus vulgaris L.) is the most important grain legume for human diet worldwide and the angular leaf spot (ALS) is one of the most devastating diseases of this crop, leading to yield losses as high as 80%. In an attempt to breed resistant cultivars, it is important to first understand the inheritance mode of resistance and to develop tools that could be used in assisted breeding. Therefore, the aim of this study was to identify quantitative trait loci (QTL) controlling resistance to ALS under natural infection conditions in the field and under inoculated conditions in the greenhouse. Results: QTL analyses were made using phenotypic data from 346 recombinant inbreed lines from the IAC-UNA x CAL 143 cross, gathered in three experiments, two of which were conducted in the field in different seasons and one in the greenhouse. Joint composite interval mapping analysis of QTL x environment interaction was performed. In all, seven QTLs were mapped on five linkage groups. Most of them, with the exception of two, were significant in all experiments. Among these, ALS10.1(DG,UC) presented major effects (R-2 between 16% - 22%). This QTL was found linked to the GATS11b marker of linkage group B10, which was consistently amplified across a set of common bean lines and was associated with the resistance. Four new QTLs were identified. Between them the ALS5.2 showed an important effect (9.4%) under inoculated conditions in the greenhouse. ALS4.2 was another major QTL, under natural infection in the field, explaining 10.8% of the variability for resistance reaction. The other QTLs showed minor effects on resistance. Conclusions: The results indicated a quantitative inheritance pattern of ALS resistance in the common bean line CAL 143. QTL x environment interactions were observed. Moreover, the major QTL identified on linkage group B10 could be important for bean breeding, as it was stable in all the environments. Thereby, the GATS11b marker is a potential tool for marker assisted selection for ALS resistance.

Histopathology of black spot symptoms in sweet oranges

In Brazil, citrus black spot (CBS) caused by Guignardia citricarpa is a major disease that has different symptoms on fruit. In this study, fruit of Citrus sinensis infected by G. citricarpa and showing the symptoms false melanosis, freckle spot and hard spot were cross-sectioned and analysed anatomically and histochemically by light microscopy. Immuno-histological assays were performed. All symptoms were accompanied by a thickening of the cuticle. False melanosis lesions did not contain pycnidia and remained restricted to the epicarp or to the first layers of the mesocarp. The stomata in this type of lesion showed phenolic compounds in the guard cells and in the sub-stomatal chamber. In some samples, the guard cells and their surrounding cells lysed, and a wound meristem began to form underneath them. Freckle spot and hard spot lesions had very similar histological alterations to the epicarp and mesocarp, but in our samples only hard spot lesions contained pycnidia. Both of these symptoms were accompanied by protein inclusions. Epidermal and sub-epidermal cells located in the oil-gland region were obliterated, causing alterations in these structures. All symptoms had regions that stained strongly for lipids and phenols.

Unraveling the Mysterious Role of Palladium in Feigl bis(dimethylglyoximate)nickel(II) Spot Tests by Means of Confocal Raman Microscopy

The add protection effect promoted by traces of PdCl2 in [Ni(dmgH)(2)] spot tests was elucidated from confocal Raman microscopy imaging, which revealed the formation of protecting layers of [Pd(dmgH)(2)] closing the extremities of the [Ni(dmgH)(2)] filaments.

Effect of fungicides and alternative products in control of anthracnose and black spot of guava

This work aimed to evaluate the efficiency of fungicides in controlling in vitro and in vivo the causal agents of anthracnose (Colletotrichum gloeosporioides and C. acutatum) and black spot (Guignardia psidii) and evaluate the effect of alternative products to control these diseases. Inhibition of mycelial growth of the pathogens was evaluated for ten fungicides at concentrations of 1, 10 and 100 mg L-1 of active ingredient in potato-dextrose-agar medium. The effectiveness of the fungicides azoxystrobin + difenoconazole, cyproconazole, pyraclostrobin, tebuconazole and tebuconazole + trifloxystrobin in controlling disease incidence and severity of anthracnose, through applications in the field, was measured in fruits collected at three stages of maturation, according to the skin color ( dark green, light green and yellowish green). In postharvest dipping of fruits, the products evaluated were citric acid, peracetic acid, salicylic acid, sodium bicarbonate, chlorine dioxide, Ecolife (R) and chitosan. The fungicides azoxystrobin + difenoconazole, pyraclostrobin, tebuconazole and trifloxystrobin + tebuconazole were highly effective in inhibiting the in vitro mycelial growth of G. psidii and moderately to highly effective in inhibiting C. acutatum and C. gloeosporioides. In field conditions, the fungicide azoxystrobin + difenoconazole was effective in controlling anthracnose and black spot in fruit at three maturity stage ( skin color yellowish green). The alternative products tested were ineffective in the curative control of anthracnose and early blight at postharvest of guava.

Analisi, progettazione e valutazione dell'efficacia dello spot pubblicitario. Una semiotica per la ricerca di mercato

Il lavoro di ricerca tenta di inquadrare sotto nuove prospettive una problematica ormai classica all’interno della semiotica della pubblicità: l’analisi dello spot. I punti chiave del lavoro – e la pretesa di una certa differenza rispetto a lavori con oggetti affini – consistono sostanzialmente in tre aspetti. Innanzitutto, vi è un ritorno alle origini flochiane nella misura in cui non solo il contesto complessivo e le finalità che la ricerca si propone sono fortemente ancorati all’interno di obiettivi di marketing, ma tutto lo studio nella sua interezza nasce dal dialogo concreto tra metodologia di analisi semiotica e prassi concreta all’interno degli istituti di ricerca di mercato. La tesi non presenta quindi una collezione di analisi di testi pubblicitari condotte in modo autoriferito, quanto piuttosto di “messe alla prova” della metodologia, funzionali alla definizione di disegni di ricerca per la marketing research. Questo comporta un dialogo piuttosto stretto con metodologie affini (sociologia qualitativa e quantitativa, psicologia motivazionale, ecc.) nella convinzione che la priorità accordata all’oggetto di analisi sia sovraordinata rispetto all’ortodossia degli strumenti metodologici. In definitiva, lo spot è sempre e comunque analizzato all’interno di una prospettiva brand-centrica che ha ben in mente la semiotica della situazione di consumo rispetto alla quale lo spot agisce da leva di valorizzazione per l’acquisto. In secondo luogo, gli oggetti analizzati sono piuttosto vari e differenziati: non solo lo spot nella sua versione audiovisiva definitiva (il “girato”), ma anche storyboard, animatic, concept (di prodotto e di comunicazione). La prospettiva generativa greimasiana va a innestarsi su problematiche legate (anche) alla genesi dello spot, alla sua progettazione e riprogettazione/ottimizzazione. La tesi mostra quindi come una semiotica per le consulenze di marketing si diriga sul proprio oggetto ponendogli domande ben circoscritte e finalizzate a un obiettivo specifico, sostanzialmente derivato dal brief contenente le intenzioni comunicazionali del cliente-azienda. Infine, pur rimanendo all’interno di una teoria semiotica generativa (sostanzialmente greimasiana e post greimasiana), la ricerca adotta una prospettiva intrinsecamente multidisciplinare che se da un lato guarda a problematiche legate al marketing, al branding e alla comunicazione pubblicitaria e d’impresa tout court, dall’altro ritorna alle teorie dell’audiovisivo, mostrando affinità e differenze rispetto a forme audiovisive standard (il “film”) e a mutuazioni da nuove estetiche (la neotelevisione, il videoclip, ecc). La tesi si mostra solidamente convinta del fatto che per parlare di efficacia discorsiva sia imprescindibile approfondire le tematiche riguardanti il sincretismo espressivo e le specifiche modalità di manifestazione stilistica. In questo contesto, il lavoro si compone di quattro grandi aree tematiche. Dopo una breve introduzione sull’attualità del tema “spot” e sulla prospettiva analiticometodologica adottata (§ 1.), nel secondo capitolo si assume teoreticamente che i contenuti dello spot derivino da una specifica (e di volta in volta diversa) creolizzazione tra domini tematici derivanti dalla marca, dal prodotto (inteso tanto come concept di prodotto, quanto come prodotto già “vestito” di una confezione) e dalle tendenze socioculturali. Le tre dimensioni vengono valutate in relazione all’opposizione tra heritage, cioè continuità rispetto al passato e ai concorrenti e vision, cioè discontinuità rispetto alla propria storia comunicazionale e a quella dei concorrenti. Si esplorano inoltre altri fattori come il testimonial-endorser che, in quanto elemento già intrinsecamente foriero di elementi di valorizzazione, va a influire in modo rilevante sul complesso tematico e assiologico della pubblicità. Essendo la sezione della tesi che prende in considerazione il piano specificatamente contenutistico dello spot, questa parte diventa quindi anche l’occasione per ritornare sul modello delle assiologie del consumo di Jean-Marie Floch, approntando alcune critiche e difendendo invece un modello che – secondo la prospettiva qui esposta – contiene punti di attualità ineludibili rispetto a schematizzazioni che gli sono successive e in qualche modo debitrici. Segue una sezione (§ 3.) specificatamente dedicata allo svolgimento e dis-implicazione del sincretismo audiovisivo e quindi – specularmente alla precedente, dedicata alle forme e sostanze del contenuto – si concentra sulle dinamiche espressive. Lo spot viene quindi analizzato in quanto “forma testuale” dotata di alcune specificità, tra cui in primis la brevità. Inoltre vengono approfondite le problematiche legate all’apporto di ciascuna specifica sostanza: il rapporto tra visivo e sonoro, lo schermo e la sua multiprospetticità sempre più evidente, il “lavoro” di punteggiatura della musica, ecc. E su tutto il concetto dominante di montaggio, intrinsecamente unito a quello di ritmo. Il quarto capitolo ritorna in modo approfondito sul rapporto tra semiotica e ricerca di mercato, analizzando sia i rapporti di reciproca conoscenza (o non conoscenza), sia i nuovi spazi di intervento dell’analisi semiotica. Dopo aver argomentato contro un certo scetticismo circa l’utilità pragmatica dell’analisi semiotica, lo studio prende in esame i tradizionali modelli di valutazione e misurazione dell’efficacia pubblicitaria (pre- e post- test) cercando di semiotizzarne il portato. Ne consegue la proposta di disegni di ricerca semiotici modulari: integrabili tra loro e configurabili all’interno di progetti semio-quali-quantitativi. Dopo aver ridefinito le possibilità di un’indagine semiotica sui parametri di efficacia discorsiva, si procede con l’analisi di un caso concreto (§ 5.): dato uno spot che si è dimostrato efficace agli occhi dell’azienda committente, quali possono essere i modi per replicarne i fattori di successo? E come spiegare invece quelli di insuccesso delle campagne successive che – almeno teoricamente – erano pensate per capitalizzare l’efficacia della prima? Non si tratta quindi di una semiotica ingenuamente chiamata a “misurare” l’efficacia pubblicitaria, che evidentemente la marketing research analizza con strumenti quantitativi assodati e fondati su paradigmi di registrazione di determinati parametri sul consumatore (ricordo spontaneo e sollecitato, immagine di marca risultante nella mente di user e prospect consumer, intenzione d’acquisto stimolata). Piuttosto l’intervento qui esposto si preoccupa più funzionalmente a spiegare quali elementi espressivi, discorsivi, narrativi, siano stati responsabili (e quindi prospetticamente potranno condizionare in positivo o in negativo in futuro) la ricezione dello spot. L’analisi evidenzia come elementi apparentemente minimali, ancorati a differenti livelli di pertinenza siano in grado di determinare una notevole diversità negli effetti di senso. Si tratta quindi di un problema di mancata coerenza tra intenzioni comunicative e testo pubblicitario effettivamente realizzato. La risoluzione di tali questioni pragmatiche conduce ad approfondimenti teoricometodologici su alcuni versanti particolarmente interessanti. In primo luogo, ci si interroga sull’apporto della dimensione passionale nella costruzione dell’efficacia e nel coinvolgimento dello spettatore/consumatore. Inoltre – e qui risiede uno dei punti di maggior sintesi del lavoro di tesi – si intraprende una proficua discussione dei modelli di tipizzazione dei generi pubblicitari, intesi come forme discorsive. Si fanno quindi dialogare modelli diversi ma in qualche misura coestensivi e sovrapponibili come quelli di Jean Marie Floch, Guido Ferraro, Cosetta Saba e Chiara Giaccardi. Si perviene così alla costruzione di un nuovo modello sintetico, idealmente onnipervasivo e trasversale alle prospettive analizzate.

Flat roofs renovation: a life cycle approach for environmental impact assessment and economic effectiveness

The high energy consumption caused by the building sector and the continuous growth and ageing of the existing housing stock show the importance of housing renovation to improve the quality of the environment. This research compares the environmental performance of flat roof systems (insulation, roofing membrane and covering layer) using Life Cycle Assessment (LCA). The aim is to give indications on how to improve the environmental performance of housing. This research uses a reference building located in the Netherlands and considers environmental impacts related to materials, energy consumption for heating and maintenance activities. It indicates impact scores for each material taking into account interconnections between the layers and between the different parts of the life cycle. It compares the environmental and economic performances of PV panels and of different materials and thermal resistance values for the insulation. These comparisons show that PV panels are convenient from an environmental and economic point of view. The same is true for the insulation layer, especially for materials as PIR (polyisocyanurate) and EPS (expanded polystyrene). It shows that energy consumption for heating causes a larger share of impact scores than production of the materials and maintenance activities. The insulation also causes larger impact scores comparing to roofing membrane and covering layer. The results show which materials are preferable for flat roof renovation and what causes the largest shares of impact. This gives indication to the roofers and to other stakeholders about how to reduce the environmental impact of the existing housing stock.

Enhancing the efficiency of solar concentrators by controlled optical aberrations

The diameters of traditional dish concentrators can reach several tens of meters, the construction of monolithic mirrors being difficult at these scales: cheap flat reflecting facets mounted on a common frame generally reproduce a paraboloidal surface. When a standard imaging mirror is coupled with a PV dense array, problems arise since the solar image focused is intrinsically circular. Moreover, the corresponding irradiance distribution is bell-shaped in contrast with the requirement of having all the cells under the same illumination. Mismatch losses occur when interconnected cells experience different conditions, in particular in series connections. In this PhD Thesis, we aim at solving these issues by a multidisciplinary approach, exploiting optical concepts and applications developed specifically for astronomical use, where the improvement of the image quality is a very important issue. The strategy we propose is to boost the spot uniformity acting uniquely on the primary reflector and avoiding the big mirrors segmentation into numerous smaller elements that need to be accurately mounted and aligned. In the proposed method, the shape of the mirrors is analytically described by the Zernike polynomials and its optimization is numerically obtained to give a non-imaging optics able to produce a quasi-square spot, spatially uniform and with prescribed concentration level. The freeform primary optics leads to a substantial gain in efficiency without secondary optics. Simple electrical schemes for the receiver are also required. The concept has been investigated theoretically modeling an example of CPV dense array application, including the development of non-optical aspects as the design of the detector and of the supporting mechanics. For the method proposed and the specific CPV system described, a patent application has been filed in Italy with the number TO2014A000016. The patent has been developed thanks to the collaboration between the University of Bologna and INAF (National Institute for Astrophysics).

Mechanical behavior of flat and curved laminates interleaved by electrospun nanofibers

A major weakness of composite materials is that low-velocity impact, introduced accidentally during manufacture, operation or maintenance of the aircraft, may result in delaminations between the plies. Therefore, the first part of this study is focused on mechanics of curved laminates under impact. For this aim, the effect of preloading on impact response of curved composite laminates is considered. By applying the preload, the stress through the thickness and curvature of the laminates increased. The results showed that all impact parameters are varied significantly. For understanding the contribution rate of preloading and pre-stress on the obtained results another test is designed. The interesting phenomenon is that the preloading can decrease the damaged area when the curvature of the both specimens is the same. Finally the effect of curvature type, concave and convex, is investigated under impact loading. In the second part, a new composition of nanofibrous mats are developed to improve the efficiency of curved laminates under impact loading. Therefore, at first some fracture tests are conducted to consider the effect of Nylon 6,6, PCL, and their mixture on mode I and mode II fracture toughness. For this goal, nanofibers are electrospun and interleaved between mid-plane of laminate composite to conduct mode I and mode II tests. The results shows that efficiency of Nylon 6,6 is better than PCL in mode II, while the effect of PCL on fracture toughness of mode I is more. By mixing these nanofibers the shortage of the individual nanofibers is compensated and so the Nylon 6,6/PCL nanofibers could increased mode I and II fracture toughness. Then all these nanofibers are used between all layers of composite layers to investigate their effect on damaged area. The results showed that PCL could decrease the damaged area about 25% and Nylon 6,6 and mixed nanofibers about 50%.