Composition and growth mode of MoSx sputtered films

MoS(x) lubricating thin films were deposited by nonreactive, reactive, and low energy ion-assisted radio-frequency (rf) magnetron sputtering from a MoS2 target. Depending on the total and reactive gas pressures, the film composition ranges between MoS0.7 and MoS2.8. A low working pressure was found to have effects similar to those of low-energy ion irradiation. Films deposited at high pressure have (002) planes preferentially perpendicular to the substrate, whereas films deposited at low pressure or under low-energy ion irradiation have (002) mainly parallel to it. Parallel films are sulfur deficient (MoS1.2-1.4). Their growth is explained in terms of an increased reactivity of the basal surfaces, itself a consequence of the creation of surface defects due to ion irradiation. The films exhibit a lubricating character for all compositions above MoS1.2. The longest lifetime in ball-on-disk wear test was found for MoS1.5.

Shell structure in mixed 3He-4He droplets

Due to the immiscibility of 3He into 4He at very low temperatures, mixed helium droplets consist of a core of 4He atoms coated by a 3He layer whose thickness depends on the number of atoms of each isotope. When these numbers are such that the centrifugal kinetic energy of the 3He atoms is small and can be considered as a perturbation to the mean-field energy, a novel shell structure arises, with magic numbers different from these of pure 3He droplets. If the outermost shell is not completely filled, the valence atoms align their spins up to the maximum value allowed by the Pauli principle.

Microstructure of highly oriented, hexagonal, boron nitride thin films grown on crystalline silicon by radio frequency plasma-assisted chemical vapor deposition

We present a high‐resolution electron microscopy study of the microstructure of boron nitride thin films grown on silicon (100) by radio‐frequency plasma‐assisted chemical vapor deposition using B2H6 (1% in H2) and NH3 gases. Well‐adhered boron nitride films grown on the grounded electrode show a highly oriented hexagonal structure with the c‐axis parallel to the substrate surface throughout the film, without any interfacial amorphous layer. We ascribed this textured growth to an etching effect of atomic hydrogen present in the gas discharge. In contrast, films grown on the powered electrode, with compressive stress induced by ion bombardment, show a multilayered structure as observed by other authors, composed of an amorphous layer, a hexagonal layer with the c‐axis parallel to the substrate surface and another layer oriented at random

Igneous layering, fractional crystallization and growth of granitic plutons: The Dolbel batholith in SW Niger

This study reassesses the development of compositional layering during the growth of granitic plutons, with emphasis on fractional crystallization and its interaction with both injection and inflation-related deformation. The Dolbel batholith (SW Niger) consists of 14, kilometre-sized plutons emplaced by pulsed magma inputs. Each pluton has a coarse-grained core and a peripheral layered series. Rocks consist of albite (An(<= 11)), K-feldspar (Or(96 99), Ab(1) (4)), quartz, edenite (X(Mg)=0337-0.55), augite (X(Mg)=0.65-0.72) and accessories (apatite, titanite and Fe-Ti-oxides). Whole-rock compositions are metaluminous, sodic (K(2)O/Na(2)O=0.49-0.62) and iron-rich [FeO(tot)/(FeO(tot)+MgO)=0.65-0.82]. The layering is present as size-graded and modally graded, sub-vertical, rhythmic units. Each unit is composed of three layers, which are, towards the interior: edenite +/- plagioclase (C(a/p)), edenite+plagioclase+augite+quartz (C(q)), and edenite+plagioclase+augite+quartz+K-feldspar (C(k)). All phases except quartz show zoned microstructures consisting of external intercumulus overgrowths, a central section showing oscillatory zoning and, in the case of amphibole and titanite, complexly zoned cores. Ba and Sr contents of feldspars decrease towards the rims. Plagioclase crystal size distributions are similar in all units, suggesting that each unit experienced a similar thermal history. Edenite, characteristic of the basal C(a/p) layer, is the earliest phase to crystallize. Microtextures and phase diagrams suggest that edenite cores may have been brought up with magma batches at the site of emplacement and mechanically segregated along the crystallized wall, whereas outer zones of the same crystals formed in situ. The subsequent C(q) layers correspond to cotectic compositions in the Qz-Ab-Or phase diagram at P(H2O)=5 kbar. Each rhythmic unit may therefore correspond to a magma batch and their repetition to crystallization of recurrent magma recharges. Microtextures and chemical variations in major phases allow four main crystallization stages to be distinguished: (1) open-system crystallization in a stirred magma during magma emplacement, involving dissolution and overgrowth (core of edenite and titanite crystals); (2) in situ fractional crystallization in boundary layers (C(a/p) and C(q) layers); (3) equilibrium `en masse' eutectic crystallization (C(k) layers); (4) compaction and crystallization of the interstitial liquid in a highly crystallized mush (e. g. feldspar intercumulus overgrowths). It is concluded that the formation of the layered series in the Dolbel plutons corresponds principally to in situ differentiation of successive magma batches. The variable thickness of the Ck layers and the microtextures show that crystallization of a rhythmic unit stops and it is compacted when a new magma batch is injected into the chamber. Therefore, assembly of pulsed magma injections and fractional crystallization are independent, but complementary, processes during pluton construction.

Ultrasound-assisted versus conventional catheter-directed thrombolysis for acute iliofemoral deep vein thrombosis.

BACKGROUND: For patients with acute iliofemoral deep vein thrombosis, it remains unclear whether the addition of intravascular high-frequency, low-power ultrasound energy facilitates the resolution of thrombosis during catheter-directed thrombolysis. METHODS AND RESULTS: In a controlled clinical trial, 48 patients (mean age 50 ± 21 years, 52% women) with acute iliofemoral deep vein thrombosis were randomized to receive ultrasound-assisted catheter-directed thrombolysis (N = 24) or conventional catheter-directed thrombolysis (N = 24). Thrombolysis regimen (20 mg r-tPA over 15 hours) was identical in all patients. The primary efficacy end point was the percentage of thrombus load reduction from baseline to 15 hours according to the length-adjusted thrombus score, obtained from standardized venograms and evaluated by a core laboratory blinded to group assignment. The percentage of thrombus load reduction was 55% ± 27% in the ultrasound-assisted catheter-directed thrombolysis group and 54% ± 27% in the conventional catheter-directed thrombolysis group (P = 0.91). Adjunctive angioplasty and stenting was performed in 19 (80%) patients and in 20 (83%) patients, respectively (P > 0.99). Treatment-related complications occurred in 3 (12%) and 2 (8%) patients, respectively (P > 0.99). At 3-month follow-up, primary venous patency was 100% in the ultrasound-assisted catheter-directed thrombolysis group and 96% in the conventional catheter-directed thrombolysis group (P = 0.33), and there was no difference in the severity of the post-thrombotic syndrome (mean Villalta score: 3.0 ± 3.9 [range 0-15] versus 1.9 ± 1.9 [range 0-7]; P=0.21), respectively. CONCLUSIONS: In this randomized controlled clinical trial of patients with acute iliofemoral deep vein thrombosis treated with a fixed-dose catheter thrombolysis regimen, the addition of intravascular ultrasound did not facilitate thrombus resolution. CLINICAL TRIAL REGISTRATION URL: http://www.clinicaltrials.gov. Unique identifier: NCT01482273.

Influence of Assisted Reproductive Techniques in the occurrence of weight discordance in twin gestations

Background:There is no actual evidence that the ART are directly related to the occurrence of weight discordance. In some studies, ART-­‐conceived twin pregnancies are at greater risk than non-­‐ART-­‐conceived ones for pregnancy complications and adverse perinatal outcome: the incidences of pregnancy-­‐induced hypertension, uterine bleeding, premature contractions, IUGR, fetal death, discordance, and cesarean section were significantly higher. Discordance rate was elevated (25.3% vs.17.0%) among ART twins, which can increase perinatal risk (increased incidence of SGA and NICU admission). Other studies say that perinatal and neonatal morbidity, gestational age at delivery, and birth weight are not affected by ART. Regarding the first trimester ultrasound, some studies didn’t notice significant differences in CRL disparity or birth weight discordance between spontaneous and ART-­‐ conceived dichorionic twin pregnancies. In ART-­‐conceived dichorionic twin pregnancies, CRL disparity may be associated with birth weight discordance. In some studies, CRL discordance in twin pregnancies in the first trimester was a frequent finding. Objectives: To analyze the association of the ART in the occurrence of weight discordance in the pregnancies between 2010 and 2013 in the Hospital Universitari de Girona Doctor Josep Trueta, and to describe the proportion of diagnosis of growth discordance in the first trimester by the ultrasonography technology. Methods: A retrospective cohort study will be performed in those patients with twin pregnancies between 2010 and 2013, within the Hospital Universitari de Girona Doctor Josep Trueta (HUJT). A retrospective and descriptive study will be done in those cases with discordance weight in the moment of the birth, in which the CRL will be studied in the first trimester ultrasound, describing the percentage of discordance detected in that moment. The general characteristics of the sample are going to be analyzed by Logistic RegressionInfluenceof

Influence of Assisted Reproductive Techniques in the occurrence of weight discordance in twin gestations

Background:There is no actual evidence that the ART are directly related to the occurrence of weight discordance. In some studies, ART-­‐conceived twin pregnancies are at greater risk than non-­‐ART-­‐conceived ones for pregnancy complications and adverse perinatal outcome: the incidences of pregnancy-­‐induced hypertension, uterine bleeding, premature contractions, IUGR, fetal death, discordance, and cesarean section were significantly higher. Discordance rate was elevated (25.3% vs.17.0%) among ART twins, which can increase perinatal risk (increased incidence of SGA and NICU admission). Other studies say that perinatal and neonatal morbidity, gestational age at delivery, and birth weight are not affected by ART. Regarding the first trimester ultrasound, some studies didn’t notice significant differences in CRL disparity or birth weight discordance between spontaneous and ART-­‐ conceived dichorionic twin pregnancies. In ART-­‐conceived dichorionic twin pregnancies, CRL disparity may be associated with birth weight discordance. In some studies, CRL discordance in twin pregnancies in the first trimester was a frequent finding. Objectives: To analyze the association of the ART in the occurrence of weight discordance in the pregnancies between 2010 and 2013 in the Hospital Universitari de Girona Doctor Josep Trueta, and to describe the proportion of diagnosis of growth discordance in the first trimester by the ultrasonography technology. Methods: A retrospective cohort study will be performed in those patients with twin pregnancies between 2010 and 2013, within the Hospital Universitari de Girona Doctor Josep Trueta (HUJT). A retrospective and descriptive study will be done in those cases with discordance weight in the moment of the birth, in which the CRL will be studied in the first trimester ultrasound, describing the percentage of discordance detected in that moment. The general characteristics of the sample are going to be analyzed by Logistic RegressionInfluenceof

Influence of Assisted Reproductive Techniques in the occurrence of weight discordance in twin gestations

Background:There is no actual evidence that the ART are directly related to the occurrence of weight discordance. In some studies, ART-­‐conceived twin pregnancies are at greater risk than non-­‐ART-­‐conceived ones for pregnancy complications and adverse perinatal outcome: the incidences of pregnancy-­‐induced hypertension, uterine bleeding, premature contractions, IUGR, fetal death, discordance, and cesarean section were significantly higher. Discordance rate was elevated (25.3% vs.17.0%) among ART twins, which can increase perinatal risk (increased incidence of SGA and NICU admission). Other studies say that perinatal and neonatal morbidity, gestational age at delivery, and birth weight are not affected by ART. Regarding the first trimester ultrasound, some studies didn’t notice significant differences in CRL disparity or birth weight discordance between spontaneous and ART-­‐ conceived dichorionic twin pregnancies. In ART-­‐conceived dichorionic twin pregnancies, CRL disparity may be associated with birth weight discordance. In some studies, CRL discordance in twin pregnancies in the first trimester was a frequent finding. Objectives: To analyze the association of the ART in the occurrence of weight discordance in the pregnancies between 2010 and 2013 in the Hospital Universitari de Girona Doctor Josep Trueta, and to describe the proportion of diagnosis of growth discordance in the first trimester by the ultrasonography technology. Methods: A retrospective cohort study will be performed in those patients with twin pregnancies between 2010 and 2013, within the Hospital Universitari de Girona Doctor Josep Trueta (HUJT). A retrospective and descriptive study will be done in those cases with discordance weight in the moment of the birth, in which the CRL will be studied in the first trimester ultrasound, describing the percentage of discordance detected in that moment. The general characteristics of the sample are going to be analyzed by Logistic RegressionInfluenceof

Growth of Crassostrea gasar cultured in marine and estuary environments in Brazilian waters

The objective of this work was to evaluate the growth of the mangrove oyster Crassostrea gasar cultured in marine and estuarine environments. Oysters were cultured for 11 months in a longline system in two study sites - São Francisco do Sul and Florianópolis -, in the state of Santa Catarina, Southern Brazil. Water chlorophyll-α concentration, temperature, and salinity were measured weekly. The oysters were measured monthly (shell size and weight gain) to assess growth. At the end of the culture period, the average wet flesh weight, dry flesh weight, and shell weight were determined, as well as the distribution of oysters per size class. Six nonlinear models (logistic, exponential, Gompertz, Brody, Richards, and Von Bertalanffy) were adjusted to the oyster growth data set. Final mean shell sizes were higher in São Francisco do Sul than in Florianópolis. In addition, oysters cultured in São Francisco do Sul were more uniformly distributed in the four size classes than those cultured in Florianópolis. The highest average values of wet flesh weight and shell weight were observed in São Francisco do Sul, whereas dry flesh weight did not differ between the sites. The estuary environment is more promising for the cultivation of oysters.

Infrastructure and Economic Growth in Spain, 1845-1935

Between the mid-nineteenth century and the outbreak of the Spanish Civil War in 1936, Spain undertook a sustained process of economic growth and structural change, but was unable to converge with the core European economies.1 The reasons behind Spain"s failure to converge have been a subject of debate among historians for decades. 2 This dissertation aims to analyze the role played by infrastructure in Spanish economic growth during that period, and tries to find out to what extent the potential shortage or inadequacy of the Spanish infrastructure endowment was one of the factors to blame for the country"s nonconvergence. The dissertation draws on recent research on the economic impact of infrastructure, and on the numerous attempts to measure that impact which have been undertaken in the wake of David Aschauer"s work on the United States.

Thermal-Aware Networked Many-Core Systems

Advancements in IC processing technology has led to the innovation and growth happening in the consumer electronics sector and the evolution of the IT infrastructure supporting this exponential growth. One of the most difficult obstacles to this growth is the removal of large amount of heatgenerated by the processing and communicating nodes on the system. The scaling down of technology and the increase in power density is posing a direct and consequential effect on the rise in temperature. This has resulted in the increase in cooling budgets, and affects both the life-time reliability and performance of the system. Hence, reducing on-chip temperatures has become a major design concern for modern microprocessors. This dissertation addresses the thermal challenges at different levels for both 2D planer and 3D stacked systems. It proposes a self-timed thermal monitoring strategy based on the liberal use of on-chip thermal sensors. This makes use of noise variation tolerant and leakage current based thermal sensing for monitoring purposes. In order to study thermal management issues from early design stages, accurate thermal modeling and analysis at design time is essential. In this regard, spatial temperature profile of the global Cu nanowire for on-chip interconnects has been analyzed. It presents a 3D thermal model of a multicore system in order to investigate the effects of hotspots and the placement of silicon die layers, on the thermal performance of a modern ip-chip package. For a 3D stacked system, the primary design goal is to maximise the performance within the given power and thermal envelopes. Hence, a thermally efficient routing strategy for 3D NoC-Bus hybrid architectures has been proposed to mitigate on-chip temperatures by herding most of the switching activity to the die which is closer to heat sink. Finally, an exploration of various thermal-aware placement approaches for both the 2D and 3D stacked systems has been presented. Various thermal models have been developed and thermal control metrics have been extracted. An efficient thermal-aware application mapping algorithm for a 2D NoC has been presented. It has been shown that the proposed mapping algorithm reduces the effective area reeling under high temperatures when compared to the state of the art.

Efficacy of fermented prawn shell waste as a feed ingredient for Indian white prawn, Fenneropenaeus indicus

Prawn shell waste collected from shrimp-processing plants in Cochin, India, was subjected to fermentation using 20 chitinoclastic and proteolytic/non-proteolytic bacterial strains. The products generated were analysed for protein, lipid, total sugars, N-acetyl glucosamine, free amino acids and ash. Shrimp diets were prepared using these 20 fermented products and a control diet using raw prawn shell waste. Feeding experiment was conducted with postlarvae (PL21) of Indian white prawn, Fenneropenaeus indicus for a period of 21 days. Biogrowth parameters such as mean weight gain, feed conversion ratio, specific growth rate and protein efficiency ratio were estimated and the animals were challenged with white spot virus orally via diet. Enhanced growth could be observed in prawns fed F134 and F124, incorporated with the fermentation products generated using Bacillus spp., C134 and C124 respectively. The percentage survival of prawns after 7 days of challenge was found to be highest for groups fed diet F111 incorporated with fermentation product generated using Bacillus sp. These products of bacterial fermentation hold promise as growth enhancers and immunostimulants in aquaculture. KEY WORDS: biogrowth parameters, feed

Selection of Marine Yeasts for the Generation of Single Cell Protein from Prawn-shell Waste

Marine yeasts (33 strains) were isolated from the coastal and offshore waters off Cochin. The isolates were identified and then characterized for the utilization of starch, gelatin, lipid, cellulose, urea, pectin, lignin, chitin and prawn-shell waste. Most of the isolates were Candida species. Based on the biochemical characterization, four potential strains were selected and their optimum pH and NaCI concentration for growth were determined. These strains were then inoculated into prawn-shell waste and SCP (single cell protein) generation was noted in terms of the increase in protein content of the final product.

Molecular Beam Epitaxial Growth of III-V Semiconductor Nanostructures on Silicon Substrates

The main focus and concerns of this PhD thesis is the growth of III-V semiconductor nanostructures (Quantum dots (QDs) and quantum dashes) on silicon substrates using molecular beam epitaxy (MBE) technique. The investigation of influence of the major growth parameters on their basic properties (density, geometry, composition, size etc.) and the systematic characterization of their structural and optical properties are the core of the research work. The monolithic integration of III-V optoelectronic devices with silicon electronic circuits could bring enormous prospect for the existing semiconductor technology. Our challenging approach is to combine the superior passive optical properties of silicon with the superior optical emission properties of III-V material by reducing the amount of III-V materials to the very limit of the active region. Different heteroepitaxial integration approaches have been investigated to overcome the materials issues between III-V and Si. However, this include the self-assembled growth of InAs and InGaAs QDs in silicon and GaAx matrices directly on flat silicon substrate, sitecontrolled growth of (GaAs/In0,15Ga0,85As/GaAs) QDs on pre-patterned Si substrate and the direct growth of GaP on Si using migration enhanced epitaxy (MEE) and MBE growth modes. An efficient ex-situ-buffered HF (BHF) and in-situ surface cleaning sequence based on atomic hydrogen (AH) cleaning at 500 °C combined with thermal oxide desorption within a temperature range of 700-900 °C has been established. The removal of oxide desorption was confirmed by semicircular streaky reflection high energy electron diffraction (RHEED) patterns indicating a 2D smooth surface construction prior to the MBE growth. The evolution of size, density and shape of the QDs are ex-situ characterized by atomic-force microscopy (AFM) and transmission electron microscopy (TEM). The InAs QDs density is strongly increased from 108 to 1011 cm-2 at V/III ratios in the range of 15-35 (beam equivalent pressure values). InAs QD formations are not observed at temperatures of 500 °C and above. Growth experiments on (111) substrates show orientation dependent QD formation behaviour. A significant shape and size transition with elongated InAs quantum dots and dashes has been observed on (111) orientation and at higher Indium-growth rate of 0.3 ML/s. The 2D strain mapping derived from high-resolution TEM of InAs QDs embedded in silicon matrix confirmed semi-coherent and fully relaxed QDs embedded in defectfree silicon matrix. The strain relaxation is released by dislocation loops exclusively localized along the InAs/Si interfaces and partial dislocations with stacking faults inside the InAs clusters. The site controlled growth of GaAs/In0,15Ga0,85As/GaAs nanostructures has been demonstrated for the first time with 1 μm spacing and very low nominal deposition thicknesses, directly on pre-patterned Si without the use of SiO2 mask. Thin planar GaP layer was successfully grown through migration enhanced epitaxy (MEE) to initiate a planar GaP wetting layer at the polar/non-polar interface, which work as a virtual GaP substrate, for the GaP-MBE subsequently growth on the GaP-MEE layer with total thickness of 50 nm. The best root mean square (RMS) roughness value was as good as 1.3 nm. However, these results are highly encouraging for the realization of III-V optical devices on silicon for potential applications.

Carbon Nanotube Growth Using Ni Catalyst in Different Layouts

Vertically aligned carbon nanotubes have been grown using Ni as catalyst by plasma enhanced chemical vapor deposition system (PECVD) in various pre-patterned substrates. Ni was thermally evaporated on silicon substrates with anodized alumina mask prepared in different methods including 2 step anodization of porous alumina template and interference lithography assisted array of pores. The templates helped to define Ni nanodots inside the pores which in turn catalyzed the growth of carbon nanotubes inside the PECVD system at temperature of 700-750C using mixture of ammonia and acetylene gases. The resulting well-aligned multi-walled carbon nanotubes were further investigated using SEM, TEM and Raman spectroscopy. The size, shape and structure of the grown carbon nanotubes were also discussed.