Neutral Gold Complexes with Tridentate SNS Thiosemicarbazide Ligands

Na[AuCl4].2H(2)O reacts with tridentate thiosemicarbazide ligands, H(2)L1, derived from N-[N',N'-dialkylamino(thiocarbonyl)]benzimidoyl chloride and thiosemicarbazides under formation of air-stable, green [AuCl(L1)] complexes. The organic ligands coordinate in a planar SNS coordination mode. Small amounts of gold(I) complexes of the composition [AuCl(L3)] are formed as side-products, where L3 is an S-bonded 5-diethylamino-3-phenyl-1-thiocarbamoyl-1,2,4-triazole. The formation of the triazole L3 can be explained by the oxidation of H(2)L1 to an intermediate thiatriazine L2 by Au3+, followed by a desulfurization reaction with ring contraction. The chloro ligands in the [AuCl(L1)] complexes can readily be replaced by other monoanionic ligands such as SCN- or CN- giving [Au(SCN)(L1)] or [Au(CN)(L1)] complexes. The complexes described in this paper represent the first examples of fully characterized neutral Gold(III) thiosemicarbazone complexes. All the [AuCl(L1)] compounds present a remarkable cell growth inhibition against human MCF-7 breast cancer cells. However, systematic variation of the alkyl groups in the N(4)-position of the thiosemicarbazone building blocks as well as the replacement of the chloride by thiocyanate ligands do not considerably influence the biological activity. On the other hand, the reduction of Au-III to Au-I leads to a considerable decrease of the cytotoxicity.

Studies on Oxidative Couplings in H-Phosphonate Chemistry

In this thesis oxidative coupling of H-phosphonate and H phosphonothioate diesters with different alcohols and amines are presented. Since the reactions with alcohols previously have been particularly unfavourable due to competing side reactions, a modified protocol leading to high coupling yields of structurally diverse hydroxylic components was developed. The phosphorylation reaction was studied using 31P NMR spectroscopy and for the first time the previously only postulated reactive intermediate involved in these reactions was observed. The use of iodine in combination with a bulky chlorosilane in pyridine was found to have a profound effect on both the suppression of side reactions and the rate of the oxidative couplings, and led to a clean formation of phosphorylated products in high yields. This synthetic protocol was then extended to include coupling reactions with bis-functional reagents containing hexamethylene linkers to provide handles for derivatisations of oligonucleotides. A synthetic protocol consisting of the stereospecific oxidative coupling of amines with H-phosphonate diesters to produce phosphoroamidates was designed in such a way that it permitted control of the stereochemical outcome of the reactions. Based on a silylation-mediated reaction utilising phenyl H phosphonothioate monoester as a thiophosphonyl transferring agent, a method was developed and used for the preparation of H-phosphonothioate building blocks for the synthesis of DNA analogues.

Secure gossiping techniques and components

Gossip protocols have proved to be a viable solution to set-up and manage largescale P2P services or applications in a fully decentralised scenario. The gossip or epidemic communication scheme is heavily based on stochastic behaviors and it is the fundamental idea behind many large-scale P2P protocols. It provides many remarkable features, such as scalability, robustness to failures, emergent load balancing capabilities, fast spreading, and redundancy of information. In some sense, these services or protocols mimic natural system behaviors in order to achieve their goals. The key idea of this work is that the remarkable properties of gossip hold when all the participants follow the rules dictated by the actual protocols. If one or more malicious nodes join the network and start cheating according to some strategy, the result can be catastrophic. In order to study how serious the threat posed by malicious nodes can be and what can be done to prevent attackers from cheating, we focused on a general attack model aimed to defeat a key service in gossip overlay networks (the Peer Sampling Service [JGKvS04]). We also focused on the problem of protecting against forged information exchanged in gossip services. We propose a solution technique for each problem; both techniques are general enough to be applied to distinct service implementations. As gossip protocols, our solutions are based on stochastic behavior and are fully decentralized. In addition, each technique’s behaviour is abstracted by a general primitive function extending the basic gossip scheme; this approach allows the adoptions of our solutions with minimal changes in different scenarios. We provide an extensive experimental evaluation to support the effectiveness of our techniques. Basically, these techniques aim to be building blocks or P2P architecture guidelines in building more resilient and more secure P2P services.

Meta-models, environment and layers: agent-oriented engineering of complex systems

Traditional software engineering approaches and metaphors fall short when applied to areas of growing relevance such as electronic commerce, enterprise resource planning, and mobile computing: such areas, in fact, generally call for open architectures that may evolve dynamically over time so as to accommodate new components and meet new requirements. This is probably one of the main reasons that the agent metaphor and the agent-oriented paradigm are gaining momentum in these areas. This thesis deals with the engineering of complex software systems in terms of the agent paradigm. This paradigm is based on the notions of agent and systems of interacting agents as fundamental abstractions for designing, developing and managing at runtime typically distributed software systems. However, today the engineer often works with technologies that do not support the abstractions used in the design of the systems. For this reason the research on methodologies becomes the basic point in the scientific activity. Currently most agent-oriented methodologies are supported by small teams of academic researchers, and as a result, most of them are in an early stage and still in the first context of mostly \academic" approaches for agent-oriented systems development. Moreover, such methodologies are not well documented and very often defined and presented only by focusing on specific aspects of the methodology. The role played by meta- models becomes fundamental for comparing and evaluating the methodologies. In fact a meta-model specifies the concepts, rules and relationships used to define methodologies. Although it is possible to describe a methodology without an explicit meta-model, formalising the underpinning ideas of the methodology in question is valuable when checking its consistency or planning extensions or modifications. A good meta-model must address all the different aspects of a methodology, i.e. the process to be followed, the work products to be generated and those responsible for making all this happen. In turn, specifying the work products that must be developed implies dening the basic modelling building blocks from which they are built. As a building block, the agent abstraction alone is not enough to fully model all the aspects related to multi-agent systems in a natural way. In particular, different perspectives exist on the role that environment plays within agent systems: however, it is clear at least that all non-agent elements of a multi-agent system are typically considered to be part of the multi-agent system environment. The key role of environment as a first-class abstraction in the engineering of multi-agent system is today generally acknowledged in the multi-agent system community, so environment should be explicitly accounted for in the engineering of multi-agent system, working as a new design dimension for agent-oriented methodologies. At least two main ingredients shape the environment: environment abstractions - entities of the environment encapsulating some functions -, and topology abstractions - entities of environment that represent the (either logical or physical) spatial structure. In addition, the engineering of non-trivial multi-agent systems requires principles and mechanisms for supporting the management of the system representation complexity. These principles lead to the adoption of a multi-layered description, which could be used by designers to provide different levels of abstraction over multi-agent systems. The research in these fields has lead to the formulation of a new version of the SODA methodology where environment abstractions and layering principles are exploited for en- gineering multi-agent systems.

Design of optical networks for advanced applications

Nowadays, computing is migrating from traditional high performance and distributed computing to pervasive and utility computing based on heterogeneous networks and clients. The current trend suggests that future IT services will rely on distributed resources and on fast communication of heterogeneous contents. The success of this new range of services is directly linked to the effectiveness of the infrastructure in delivering them. The communication infrastructure will be the aggregation of different technologies even though the current trend suggests the emergence of single IP based transport service. Optical networking is a key technology to answer the increasing requests for dynamic bandwidth allocation and configure multiple topologies over the same physical layer infrastructure, optical networks today are still “far” from accessible from directly configure and offer network services and need to be enriched with more “user oriented” functionalities. However, current Control Plane architectures only facilitate efficient end-to-end connectivity provisioning and certainly cannot meet future network service requirements, e.g. the coordinated control of resources. The overall objective of this work is to provide the network with the improved usability and accessibility of the services provided by the Optical Network. More precisely, the definition of a service-oriented architecture is the enable technology to allow user applications to gain benefit of advanced services over an underlying dynamic optical layer. The definition of a service oriented networking architecture based on advanced optical network technologies facilitates users and applications access to abstracted levels of information regarding offered advanced network services. This thesis faces the problem to define a Service Oriented Architecture and its relevant building blocks, protocols and languages. In particular, this work has been focused on the use of the SIP protocol as a inter-layers signalling protocol which defines the Session Plane in conjunction with the Network Resource Description language. On the other hand, an advantage optical network must accommodate high data bandwidth with different granularities. Currently, two main technologies are emerging promoting the development of the future optical transport network, Optical Burst and Packet Switching. Both technologies respectively promise to provide all optical burst or packet switching instead of the current circuit switching. However, the electronic domain is still present in the scheduler forwarding and routing decision. Because of the high optics transmission frequency the burst or packet scheduler faces a difficult challenge, consequentially, high performance and time focused design of both memory and forwarding logic is need. This open issue has been faced in this thesis proposing an high efficiently implementation of burst and packet scheduler. The main novelty of the proposed implementation is that the scheduling problem has turned into simple calculation of a min/max function and the function complexity is almost independent of on the traffic conditions.

Microfluidic device and interfacial transport: application to biomolecules and nanostructures

The aim of my dissertation is to provide new knowledge and applications of microfluidics in a variety of problems, from materials science, devices, and biomedicine, where the control on the fluid dynamics and the local concentration of the solutions containing the relevant molecules (either materials, precursors, or biomolecules) is crucial. The control of interfacial phenomena occurring in solutions at dierent length scales is compelling in nanotechnology for devising new sensors, molecular electronics devices, memories. Microfluidic devices were fabricated and integrated with organic electronics devices. The transduction involves the species in the solution which infills the transistor channel and confined by the microfluidic device. This device measures what happens on the surface, at few nanometers from the semiconductor channel. Soft-lithography was adopted to fabricate platinum electrodes, starting from platinum carbonyl precursor. I proposed a simple method to assemble these nanostructures in periodic arrays of microstripes, and form conductive electrodes with characteristic dimension of 600 nm. The conductivity of these sub-microwires is compared with the values reported in literature and bulk platinum. The process is suitable for fabricating thin conductive patterns for electronic devices or electrochemical cells, where the periodicity of the conductive pattern is comparable with the diusion length of the molecules in solution. The ordering induced among artificial nanostructures is of particular interest in science. I show that large building blocks, like carbon nanotubes or core-shell nanoparticles, can be ordered and self-organised on a surface in patterns due to capillary forces. The eective probability of inducing order with microfluidic flow is modeled with finite element calculation on the real geometry of the microcapillaries, in soft-lithographic process. The oligomerization of A40 peptide in microconfined environment represents a new investigation of the extensively studied peptide aggregation. The added value of the approach I devised is the precise control on the local concentration of peptides together with the possibility to mimick cellular crowding. Four populations of oligomers where distinguished, with diameters ranging from 15 to 200 nm. These aggregates could not be addresses separately in fluorescence. The statistical analysis on the atomic force microscopy images together with a model of growth reveal new insights on the kinetics of amyloidogenesis as well as allows me to identify the minimum stable nucleus size. This is an important result owing to its implications in the understanding and early diagnosis and therapy of the Alzheimer’s disease

Sintesi di catalizzatori supportati Au/Cu e studio della loro reattività per l'ossidazione selettiva del 5-idrossimetilfurfurale

Al giorno d’oggi i combustibili fossili come carbone, olio e gas naturale forniscono più del 75% dell’energia mondiale. Tuttavia, la crescente richiesta di queste fonti di energia non rinnovabili, si manifesta in un momento in cui le riserve naturali si stanno esaurendo; è stato infatti stimato che le riserve petrolifere di tutto il mondo possano essere sufficienti per fornire energia e produrre prodotti chimici per i prossimi quarant’anni. Per questo motivo la conversione delle biomasse per produrre energia e prodotti chimici sta diventando una valida alternativa per diversificare le fonti energetiche e ridurre il surriscaldamento globale. Le biomasse, infatti, oltre ad essere una fonte rinnovabile, generano minori emissioni di gas serra rispetto ai combustibili fossili, perché la CO2 rilasciata nei processi di utilizzo viene bilanciata da quella consumata nel processo di crescita delle biomasse stesse. Lo sfruttamento delle biomasse per la produzione di building blocks per la chimica suscita particolare interesse, poiché le molecole ottenute sono già parzialmente funzionalizzate; ciò significa che la sintesi di prodotti chimici specifici richiede un minor numero di stadi rispetto ai building blocks petroliferi, con conseguente diminuzione di prodotti di scarto e sottoprodotti. Un esempio di queste potenziali “molecole piattaforma” è il 5-idrossimetilfurfurale (HMF), un importante composto derivato dalla disidratazione di zuccheri, intermedio chiave per la sintesi di un’ampia varietà di prodotti chimici e combustibili alternativi, tra cui l’acido 2,5- furandicarbossilico (FDCA), che è stato identificato tra i dodici composti chimici più importanti degli ultimi anni. Per esempio, il FDCA è un possibile sostituto dell’acido tereftalico, usato per produrre il polietilentereftalato (PET). Recentemente alcuni autori hanno riportato interessanti risultati sull’ossidazione dell’HMF a FDCA utilizzando catalizzatori a base di Au supportato. Questi catalizzatori mostrano però significativi problemi di disattivazione. Lo scopo di questo lavoro di tesi è stato quindi lo sviluppo di catalizzatori attivi e stabili nella reazione di ossidazione dell’HMF a FDCA. Il lavoro portato avanti ha avuto come obbiettivi principali: l’ottimizzazione della sintesi di nanoparticelle di oro e oro/rame a diverso rapporto molare, mediante un processo di sintesi, in acqua, a basso impatto ambientale. Tale metodo di sintesi si basa sull’azione riducente del sistema glucosio-NaOH ed è stato messo a punto in lavori di tesi precedenti. Le nanoparticelle sintetizzate sono state utilizzate, quali fase attiva, per la preparazione di catalizzatori supportati su TiO2 e CeO2 lo studio dell’attività catalitica e riusabilità dei catalizzatori preparati nell’ossidazione in fase liquida del HMF a FDCA.

Architectures for Context Aware Services in Smart Environments

This thesis deals with Context Aware Services, Smart Environments, Context Management and solutions for Devices and Service Interoperability. Multi-vendor devices offer an increasing number of services and end-user applications that base their value on the ability to exploit the information originating from the surrounding environment by means of an increasing number of embedded sensors, e.g. GPS, compass, RFID readers, cameras and so on. However, usually such devices are not able to exchange information because of the lack of a shared data storage and common information exchange methods. A large number of standards and domain specific building blocks are available and are heavily used in today's products. However, the use of these solutions based on ready-to-use modules is not without problems. The integration and cooperation of different kinds of modules can be daunting because of growing complexity and dependency. In this scenarios it might be interesting to have an infrastructure that makes the coexistence of multi-vendor devices easy, while enabling low cost development and smooth access to services. This sort of technologies glue should reduce both software and hardware integration costs by removing the trouble of interoperability. The result should also lead to faster and simplified design, development and, deployment of cross-domain applications. This thesis is mainly focused on SW architectures supporting context aware service providers especially on the following subjects: - user preferences service adaptation - context management - content management - information interoperability - multivendor device interoperability - communication and connectivity interoperability Experimental activities were carried out in several domains including Cultural Heritage, indoor and personal smart spaces – all of which are considered significant test-beds in Context Aware Computing. The work evolved within european and national projects: on the europen side, I carried out my research activity within EPOCH, the FP6 Network of Excellence on “Processing Open Cultural Heritage” and within SOFIA, a project of the ARTEMIS JU on embedded systems. I worked in cooperation with several international establishments, including the University of Kent, VTT (the Technical Reserarch Center of Finland) and Eurotech. On the national side I contributed to a one-to-one research contract between ARCES and Telecom Italia. The first part of the thesis is focused on problem statement and related work and addresses interoperability issues and related architecture components. The second part is focused on specific architectures and frameworks: - MobiComp: a context management framework that I used in cultural heritage applications - CAB: a context, preference and profile based application broker which I designed within EPOCH Network of Excellence - M3: "Semantic Web based" information sharing infrastructure for smart spaces designed by Nokia within the European project SOFIA - NoTa: a service and transport independent connectivity framework - OSGi: the well known Java based service support framework The final section is dedicated to the middleware, the tools and, the SW agents developed during my Doctorate time to support context-aware services in smart environments.

Sistemi liquido cristallini complessi: simulazioni al calcolatore e studi ESR

The aim of this PhD thesis was to study at a microscopic level different liquid crystal (LC) systems, in order to determine their physical properties, resorting to two distinct methodologies, one involving computer simulations, and the other spectroscopic techniques, in particular electron spin resonance (ESR) spectroscopy. By means of the computer simulation approach we tried to demonstrate this tool effectiveness for calculating anisotropic static properties of a LC material, as well as for predicting its behaviour and features. This required the development and adoption of suitable molecular models based on a convenient intermolecular potentials reflecting the essential molecular features of the investigated system. In particular, concerning the simulation approach, we have set up models for discotic liquid crystal dimers and we have studied, by means of Monte Carlo simulations, their phase behaviour and self­-assembling properties, with respect to the simple monomer case. Each discotic dimer is described by two oblate Gay­Berne ellipsoids connected by a flexible spacer, modelled by a harmonic "spring" of three different lengths. In particular we investigated the effects of dimerization on the transition temperatures, as well as on the characteristics of molecular aggregation displayed and the relative orientational order. Moving to the experimental results, among the many experimental techniques that are typically employed to evaluate LC system distinctive features, ESR has proved to be a powerful tool in microscopic scale investigation of the properties, structure, order and dynamics of these materials. We have taken advantage of the high sensitivity of the ESR spin probe technique to investigate increasingly complex LC systems ranging from devices constituted by a polymer matrix in which LC molecules are confined in shape of nano- droplets, as well as biaxial liquid crystalline elastomers, and dimers whose monomeric units or lateral groups are constituted by rod-like mesogens (11BCB). Reflection-mode holographic-polymer dispersed liquid crystals (H-PDLCs) are devices in which LCs are confined into nanosized (50­-300 nm) droplets, arranged in layers which alternate with polymer layers, forming a diffraction grating. We have determined the configuration of the LC local director and we have derived a model of the nanodroplet organization inside the layers. Resorting also to additional information on the nanodroplet size and shape distribution provided by SEM images of the H-PDLC cross-section, the observed director configuration has been modeled as a bidimensional distribution of elongated nanodroplets whose long axis is, on the average, parallel to the layers and whose internal director configuration is a uniaxial quasi- monodomain aligned along the nanodroplet long axis. The results suggest that the molecular organization is dictated mainly by the confinement, explaining, at least in part, the need for switching voltages significantly higher and the observed faster turn-off times in H-PDLCs compared to standard PDLC devices. Liquid crystal elastomers consist in cross-linked polymers, in which mesogens represent the monomers constituting the main chain or the laterally attached side groups. They bring together three important aspects: orientational order in amorphous soft materials, responsive molecular shape and quenched topological constraints. In biaxial nematic liquid crystalline elastomers (BLCEs), two orthogonal directions, rather than the one of normal uniaxial nematic, can be controlled, greatly enhancing their potential value for applications as novel actuators. Two versions of a side-chain BLCEs were characterized: side­-on and end­-on. Many tests have been carried out on both types of LCE, the main features detected being the lack of a significant dynamical behaviour, together with a strong permanent alignment along the principal director, and the confirmation of the transition temperatures already determined by DSC measurements. The end­-on sample demonstrates a less hindered rotation of the side group mesogenic units and a greater freedom of alignment to the magnetic field, as already shown by previous NMR studies. Biaxial nematic ESR static spectra were also obtained on the basis of Molecular Dynamics generated biaxial configurations, to be compared to the experimentally determined ones, as a mean to establish a possible relation between biaxiality and the spectral features. This provides a concrete example of the advantages of combining the computer simulation and spectroscopic approaches. Finally, the dimer α,ω-bis(4'-cyanobiphenyl-4-yl)undecane (11BCB), synthesized in the "quest" for the biaxial nematic phase has been analysed. Its importance lies in the dimer significance as building blocks in the development of new materials to be employed in innovative technological applications, such as faster switching displays, resorting to the easier aligning ability of the secondary director in biaxial phases. A preliminary series of tests were performed revealing the population of mesogenic molecules as divided into two groups: one of elongated straightened conformers sharing a common director, and one of bent molecules, which display no order, being equally distributed in the three dimensions. Employing this model, the calculated values show a consistent trend, confirming at the same time the transition temperatures indicated by the DSC measurements, together with rotational diffusion tensor values that follow closely those of the constituting monomer 5CB.

Von zwei- zu dreidimensionalen Graphitausschnitten

Zusammenfassung: 'Von zwei- zu dreidimensionalen Graphitausschnitten'Dissertation Florian Dötz Die vorliegende Arbeit zeichnet den synthetischen Weg von zwei- zu dreidimensionalen Graphitausschnitten nach und thematisiert insbesondere die Schnittstelle dieser beiden Bereiche, die durch den Übergang von planaren Systemen zu räumlichen Strukturen verkörpert wird und daher die Darstellung nicht-planarer polycyclischer aromatischer Kohlenwasserstoffe (PAH) vorsieht. Diese Zielsetzung mündet in einer dreiteiligen Gliederung der angefertigten Dissertation und sieht im ersten Teil die Synthese planarer Graphitsegmente durch oxidative Cyclodehydrierung entsprechender Oligophenylvorläufer mit Eisen(III)chlorid vor, gefolgt von der Darstellung nicht-planarer PAHs mit denselben oxidativen Methoden sowie der Präparation und Charakterisierung dreidimensionaler, supramolekularer PAH-Aggregate.Der erste Abschnitt beschreibt die Synthese von kleineren PAHs als Modellverbindung für größere Systeme und ihre UV-spektroskopische Charakterisierung. Daran anknüpfend wird die Synthese mehrerer heteroatomsubstituierter Derivate des Hexa-peri-hexabenzocoronens (HBC) vorgestellt und ihre flüssigkristallinen Eigenschaften eingehend untersucht. Dabei wurde mit der oxidativen Cyclodehydrierung geeigneter Vorläufer auf Einkristalloberflächen ein neuer Weg zur Synthese dieser Verbindungen etabliert.Im Zentrum des zweiten Teils dieser Arbeit stand die Induktion von Nichtplanarität in ausgedehnten PAHs mit den im ersten Abschnitt entwickelten Synthesekonzepten. Hier konnte mit der erfolgreichen Darstellung eines 18fach methoxysubstituierten HBC-Derivats eine erstaunliche Krümmung des aromatischen Systems erreicht werden, wie durch Kristallstrukturanalyse gezeigt wurde. Anhand mehrerer Beispiele wurde ebenso die Leistungsfähigkeit der verwendeten Cyclodehydrierungsmethode verdeutlicht, da viele Vorläufermoleküle gegenüber den Reaktionsbedingungen nicht inert sind.Der letzte Teil dieser Arbeit beschreibt schließlich die Präparation und Charakterisierung dreidimensionaler, supramolekularer PAH-Aggregate auf der Basis von HBC-Amiden, deren Eigenschaften sich durch eine sorgfältige Wahl der jeweiligen Monomerbausteine manipulieren lassen. Bei Verwendung von chiralen Monomeren wird hier die Expression von supramolekularer Chiralität erreicht und durch spektroskopische und chiroptische Methoden belegt.

Wasserstoffbrücken-gebundene Netzwerke

Die supramolekularen Organisationen von 5-n-Alkoxyisophthaläuren und 2,5-Di-n-alkoxyterephthalsäuren bilden durch sekundäre Wechselwirkungen in Form van der Waals-Kräften und Wasserstoffbrückenbindungen hochgeordnete lamellare Strukturen, die sowohl mittels Röntgen-kristallgraphie als auch durch Rastertunnelmikroskopie (STM) visualisierbar sind. Diese Art der Aggregationsmuster ermöglicht den potentiell reaktiven Gruppen (Diacetylene, Zimtsäuren) in der Alkoxykette, einen optimalen Abstand und geometrische Orientierungen im Kristall einzunehmen, um lichtinduzierte Reaktionen im Festkörper durchzuführen. Einführung einer Amidgruppe an die Alkoxykette erweitert dieses Konzept, durch Erhalt einer zusätzlichen Wasserstoffbrückenbindung im hydrophoben Bereich der Organisation.Die Stabilität solche supramolekularer Aggregate kann durch Einführung semifluorierter Alkoxyketten stark beeinflußt werden, da die Inkompatibilität der pefluorierten Gruppen durch viele organische Verbindungen das Gleichgewicht nicht-kovalenter Wechselwirkung drastisch verändert. Diese Eigenschaft der semifluorierten 5-n-Alkoxyisopthalsäuren und 2,5-Di-n-alkoxyterephthalsäuren zeigt sich erstaunlicherweise jedoch nur bei einem großen Anteil des perfluorierten Alkylteils als der des nicht-perfluorierten. Da sich dann die perfluorierten Alkylteile untereinander organisieren können, erscheint die Änderung der Assoziationsstruktur von interdigitiert-lamellar zu nicht-interdigitiert-lamellar plausibel.Das gezielte Design eines neuen Organisationsmusters der 5-n-Alkoxyisophthalsäuren gelang durch Brechung der Symmetrie dieses Bausteins. Die Einführung zweier Alkoxyketten ließ die zweidimensionale Anordnung der wasserstoffbrückengebundenen Aromate unverändert, resultierte aber mit Ausbruch einer Alkoxykette aus dieser Ebene.

Gekreuzt konjugierte Oligomere aus Benzolringen und Heterocyclen

Gekreuzt konjugierte Oligomere aus Benzolringen und Heterocyclen Oligomere aus Arylen- oder/und Hetarylen-Bausteinen stellenein aktuelles Arbeitsgebiet in der organischen Synthese undder Materialwissenschaft dar. Die Enoneinheit der Chalkonerepräsentiert ein bifunktionelles Elektrophil, das für denAufbau von unterschiedlichen Heterocyclen hervorragendgeeignet ist. Im Rahmen der vorliegenden Arbeit wurden dreineue Reihen von heterocyclischen Oligomeren hergestellt:1H-Pyrrole, 1H-Pyrazole und Pyridine, die über eine alter-nierende Sequenz von Phenylen- oder Benzoylen-Einheitenverbunden sind. Ihre Herstellung basierte auf Michael-Additionen von den kettenförmigen, gekreuzt konjugiertenOligochalkonen und den jeweiligen geeigneten N-haltigenBausteinen: Tosylmethylisocyanid, Methylhydrazin undPhenacylpyridiniumbromid in der Reihe der Pyrrole, Pyrazoleund Pyridine. Die UV/Vis-Untersuchung aller Reihen der Oligoheterocyclenzeigte als allgemeinen Trend im Vergleich mit dem UV/Vis-Verhalten der Oliogochalkone eine ausgeprägte hypsochromeVerschiebung der langwelligen Absorption. Dieser beobachtetehypsochrome Shift geht auf die veränderten Chromophore zurück und deutet außerdem darauf hin, dass die effektiveKonjugation bei wachsender Moleküllänge geringer sein sollte. In den einzelnen Reihen der Oligoheterocyclenerkennt man jeweils bei Vergrößerung der Chromophore einenkleinen bathochromen Shift der langwelligen Absorption.

Structure and dynamics of supramolecular assemblies studied by advanced solid-state NMR spectroscopy

Ziel der vorliegenden Arbeit ist die Aufklärung von Struktur und Dynamik komplexer supramolekularer Systeme mittels Festkörper NMR Spektroskopie. Die Untersuchung von pi-pi Wechselwirkungen, welche einen entscheidenden Einfluss auf die strukturellen und dynamischen Eigenschaften supra- molekularer Systeme haben, hilft dabei, die Selbst- organisationsprozesse dieser komplexen Materialien besser zu verstehen. Mit dipolaren 1H-1H and 1H-13C Wiedereinkopplungs NMR Methoden unter schnellem MAS können sowohl 1H chemische Verschiebungen als auch dipolare 1H-1H und 1H-13C Kopplungen untersucht werden, ohne dass eine Isotopenmarkierung erforderlich ist. So erhält man detaillierte Informationen über die Struktur und die Beweglichkeit einzelner Molekül- segmente. In Verbindung mit sogenannten nucleus independent chemical shift (NICS) maps (berechnet mit ab-initio Methoden) lassen sich Abstände von Protonen relativ zu pi-Elektronensystemen bestimmen und so Strukturvorschläge ableiten. Mit Hilfe von homo- und heteronuklearen dipolaren Rotationsseitenbandenmustern könnenaußerdem Ordnungs- parameter für verschiedene Molekülsegmente bestimmt werden. Die auf diese Weise gewonnenen Informationen über die strukturellen und dynamischen Eigenschaften supramolekularer Systeme tragen dazu bei, strukturbestimmende Molekül- einheiten und Hauptordnungsphänomene zu identifizieren sowie lokale Wechselwirkungen zu quantifizieren, um so den Vorgang der Selbstorganisation besser zu verstehen.

Donor-Akzeptor-substituierte Oligo(phenylenethinylen)e und Oligo(thienylenethinylen)e

Die Dissertation beschäftigt sich mit der Synthese und den Eigenschaftsuntersuchungen von Oligo(phenylenethinylen)en (OPEs) und Oligo(thienylenethinylen)en (OTEs) mit terminaler Donor-Akzeptor-Substitution. Die Darstellung der Oligomerenreihen erfolgt über ein „Baukastensystem“ bestehend aus Start,- Synthese, - und dem jeweiligen Endbaustein. Die zentrale Synthesereaktion zum Aufbau der Push-Pull-Systeme ist eine moderne und effektive Pd-katalysierte Reaktion, die Sonogashira-Hagihara-Kupplung. Für die dialkylaminosubstituierten OPE-Systeme konnten die Cyano,- Formyl,- Nitro –und Dicyanovinylgruppe als Akzeptoren eingeführt werden. In der dodecylsulfanylsubstituierten OTE-Serie wurde als Akzeptor die Nitrogruppe verwendet, während in der methoxysubstituierten OTE-Reihe die Formyl,- Nitro –und Dicyanovinylgruppe als Akzeptoren eingeführt wurde. Alle Reihen konnten mittels 1H-, 13C-, IR-, MS- und UV/Vis-Spektroskopie vollständig charakterisiert werden. Die Lage des langwelligen Absorptionsmaximums zeigt eine starke Abhängigkeit von der Donor- und Akzeptorstärke der Substituenten sowie von der Länge des konjugierten Pie-Systems. Für beide Pie-Systeme ergibt sich bei hinreichend starker Donor- und Akzeptorsubstitution eine ungewöhnliche hypsochrome Verschiebung der langwelligen Absorptionsmaxima. Mit Hilfe der semiempirischen Quantenmechanik wird ein Modell vorgestellt, das die ungewöhnlichen spektroskopischen Eigenschaften der OPEs und OTEs erklären und vorhersagen kann. Mittels elektrooptischer Absorptionsmessungen ( EOAM ), EFISHG-Messungen sowie der Frequenzverdreifachungsspektroskopie ( THG ) werden die NLO-Eigenschaften in Abhängigkeit von der Konjugationslänge der nitrosubstituierten OPE-Serie bestimmt.

Synthese und Konformationsanalyse von Glycopeptiden aus der homophilen Erkennungsregion des LI-Cadherins

Über die Sekundärstruktur von LI-Cadherin ist bislang wenig bekannt. Es gibt keine Röntgenanalysen und keine NMR-spektroskopische Untersuchungen. Man kann nur aufgrund der Sequenzhomologien zu den bereits untersuchten klassischen Cadherinen vermuten, daß im LI-Cadherin ähnliche Verhältnisse in der entscheidenden Wechselwirkungsdomäne vorliegen. In Analogie zum E-Cadherin wurde angenommen, daß es im LI-Cadherin eine „homophile Erkennungsregion“ gibt, die in einer typischen beta-Turn-Struktur mit anschließenden Faltblattbereichen vorliegen sollte. Um den Einfluß verschiedener Saccharid-Antigene auf die Turn-Bildung zu untersuchen, wurden im ersten Teil der vorliegenden Arbeit verschiedene Saccharid-Antigen-Bausteine synthetisiert, mit denen dann im zweiten Teil der Arbeit durch sequentielle Festphasensynthese entsprechende Glycopeptidstrukturen aus dieser Region des LI-Cadherins aufgebaut wurden. Zur Synthese sämtlicher Antigen-Bausteine ging man von D-Galactose aus, die über das Galactal und eine Azidonitratisierung in vier Stufen zum Azidobromid umgesetzt wurde. In einer Koenigs-Knorr-Glycosylierung wurde dieses dann auf die Seitenkette eines geschützten Serin-Derivats übertragen. Reduktion und Schutzgruppenmanipulationen lieferten den TN Antigen-Baustein. Ein TN-Antigen-Derivat war Ausgangspunkt für die Synthesen der weiteren Glycosyl-Serin-Bausteine. So ließ sich mittels der Helferich-Glycosylierung der T Antigen-Baustein herstellen, und der STN-Antigen-Baustein wurde durch eine Sialylierungsreaktion und weitere Schutzgruppenmanipulationen erhalten. Da die Route über das T-Antigen-Derivat den Hauptsyntheseweg für die weiteren komplexeren Antigene bildete, wurden verschiedene Schutzgruppenmuster getestet. Darauf aufbauend ließen sich durch verschiede Glycosylierungsreaktionen und Schutzgruppenmanipulationen der komplexe (2->6)-ST-Antigen-Baustein, (2->3)-Sialyl-T- und Glycophorin-Antigen-Baustein synthetisieren. Im nächsten Abschnitt der Doktorarbeit wurden die synthetisierten Saccharid-Antigen-Serin-Konjugate in Festphasen-Glycopeptidsynthesen eingesetzt. Zunächst wurde ein mit dem TN Antigen glycosyliertes Tricosapeptid hergestellt. Mittels NMR-spektroskopischen Untersuchungen und folgenden Energieminimierungsberechnungen konnte eine dreidimensionale Struktur ermittelt werden. Die Peptidsequenz des Turn-bildenden Bereichs wurde für die folgenden Synthesen gewählt. Die Abfolge der einzelnen Reaktionsschritte für die Festphasensynthesen mit den verschiedenen Saccharid-Antigen-Bausteinen war ähnlich. Insgesamt verlief die Festphasen-Glycopeptidsynthese in starker Abhängigkeit vom sterischen Anspruch der Saccharid-Bausteine. Sämtliche so synthetisierten Glycopeptide wurden NMR spektroskopisch charakterisiert und mittels NOE-Experimenten hinsichtlich ihrer Konformation untersucht. Durch diese Bestimmung der räumlichen Protonen-Protonen-Kontakte konnte mittels Rechnungen zur Energieminimierung, basierend auf MM2 Kraftfeldern, eine dreidimensionale Struktur für die Glycopeptide postuliert werden. Sämtliche synthetisierten Glycopeptide weisen eine schleifenartige Konformation auf. Der Einfluß der Saccharid-Antigene ist unterschiedlich, und läßt sich in drei Gruppen einteilen.