Role of Crop Research and Development in food Security of Africa

Food security is the main concern in Africa as the production and productivity of crops are under continuous threat. Indigenous crops also known as orphan- or as underutilized- crops provide key contributions to food security under the present scenario of increasing world population and changing climate. Hence, these crops which belong to the major categories of cereals, legumes, fruits and root crops play a key role in the livelihood of the resource-poor farmers and consumers since they perform better than the major world crops under extreme soil and climate conditions prevalent in the continent. These indigenous crops have the major advantage that they fit well into the general socio-economic and ecological context of the region. However, despite their huge importance, African crops have generally received little attention by the global scientific community. With the current production systems, only a fraction of yield potential was achieved for most of these crops. In order to devise strategies towards boosting crop productivity in Africa, the current production constraints should be investigated and properly addressed. Key traits known to increase productivity and/or improve nutrition and diverse conventional and modern crop improvement techniques need to be implemented. Commitments in the value-chain from the research, production, marketing to distribution of improved seeds are required by relevant national and international institutions as well as African governments to promote food security in a sustainable manner. The review also presents major achievements and suggestions for stakeholders interested in African agriculture.

Los cambios en el proceso de producción del algodón en el Chaco en las últimas décadas y sus consecuencias en las condiciones de vida de minifundistas y trabajadores vinculados

En el artículo nos planteamos los cambios que desde los años 1990 ha sufrido la producción de algodón en la Provincia del Chaco -principal referente nacional del cultivo- y cómo estos fueron modificando la estructura de vida de los agentes históricamente vinculados, en especial, los trabajadores y los minifundistas hoy prácticamente excluidos de dicho proceso. Entre los numerosos cambios, los más relevantes son los vinculados al proceso de tecnificación, a la desarticulación en el territorio de cadenas de valor agregado y a la diversificación hacia otros cultivos como las oleaginosas y, notoriamente, al avance del cultivo de soja sobre hectáreas antes destinadas al algodón. Como consecuencia de dichos procesos de cambio, se evidencia la imposibilidad -por parte de los minifundistas- de sostener una producción rentable, la pérdida de numerosas fuentes de trabajo directas e indirectas, el aumento de la pobreza, la emigración hacia los cordones periféricos urbanos (Gran Resistencia, Gran Rosario) y el deterioro de las condiciones laborales de quienes aún permanecen dentro del sistema productivo algodonero. Las políticas públicas, tanto locales como nacionales, también son un punto de interés en el análisis puesto que tienen gran repercusión en el actual estado de la situación

Los cambios en el proceso de producción del algodón en el Chaco en las últimas décadas y sus consecuencias en las condiciones de vida de minifundistas y trabajadores vinculados

En el artículo nos planteamos los cambios que desde los años 1990 ha sufrido la producción de algodón en la Provincia del Chaco -principal referente nacional del cultivo- y cómo estos fueron modificando la estructura de vida de los agentes históricamente vinculados, en especial, los trabajadores y los minifundistas hoy prácticamente excluidos de dicho proceso. Entre los numerosos cambios, los más relevantes son los vinculados al proceso de tecnificación, a la desarticulación en el territorio de cadenas de valor agregado y a la diversificación hacia otros cultivos como las oleaginosas y, notoriamente, al avance del cultivo de soja sobre hectáreas antes destinadas al algodón. Como consecuencia de dichos procesos de cambio, se evidencia la imposibilidad -por parte de los minifundistas- de sostener una producción rentable, la pérdida de numerosas fuentes de trabajo directas e indirectas, el aumento de la pobreza, la emigración hacia los cordones periféricos urbanos (Gran Resistencia, Gran Rosario) y el deterioro de las condiciones laborales de quienes aún permanecen dentro del sistema productivo algodonero. Las políticas públicas, tanto locales como nacionales, también son un punto de interés en el análisis puesto que tienen gran repercusión en el actual estado de la situación

Los cambios en el proceso de producción del algodón en el Chaco en las últimas décadas y sus consecuencias en las condiciones de vida de minifundistas y trabajadores vinculados

En el artículo nos planteamos los cambios que desde los años 1990 ha sufrido la producción de algodón en la Provincia del Chaco -principal referente nacional del cultivo- y cómo estos fueron modificando la estructura de vida de los agentes históricamente vinculados, en especial, los trabajadores y los minifundistas hoy prácticamente excluidos de dicho proceso. Entre los numerosos cambios, los más relevantes son los vinculados al proceso de tecnificación, a la desarticulación en el territorio de cadenas de valor agregado y a la diversificación hacia otros cultivos como las oleaginosas y, notoriamente, al avance del cultivo de soja sobre hectáreas antes destinadas al algodón. Como consecuencia de dichos procesos de cambio, se evidencia la imposibilidad -por parte de los minifundistas- de sostener una producción rentable, la pérdida de numerosas fuentes de trabajo directas e indirectas, el aumento de la pobreza, la emigración hacia los cordones periféricos urbanos (Gran Resistencia, Gran Rosario) y el deterioro de las condiciones laborales de quienes aún permanecen dentro del sistema productivo algodonero. Las políticas públicas, tanto locales como nacionales, también son un punto de interés en el análisis puesto que tienen gran repercusión en el actual estado de la situación

Local Firms in Latecomer Developing Countries amidst China's Rise -The case of Vietnam's motorcycle industry-

This paper examines the impact of China's recent rise on the development of local firms in latecomer developing countries. Based on a detailed analysis of Vietnam's motorcycle industry, the paper argues that China's impact may go beyond what a trade analysis suggests. Indeed, China's rise induced a dynamic transformation in the structure of value chains within Vietnam's motorcycle industry, bringing about far-reaching consequences on the development and upgrading trajectories of local firms. The implications of the case study for the wider "global value chain" approach is also discussed.

Infrastructure (Rural Road) Development and Poverty Alleviation in Lao PDR

Rural road in Lao PDR defined as connecting road from village to main road, where it will lead them to market and access to other economic and social service facilities. However, due to mostly rural people accustom with subsistence farming, connecting road seems less important for rural people as their main farming produce is for own consumption rather than markets. After the introduction and implementation of New Economic Mechanism (NEM) since 1986, many rural villages have gradually developed and integrated into market system where people have significantly changed their livelihood with a better system. This progress has significantly contributed in improving income earning of people, better living standard and reduce poverty. The paper aims to illustrate the significant of rural road as connecting road from village to markets or a market access approach of farm produces. It also demonstrates through which approach, rural farmers/people could improve their income earning, develop their farming system, living standard and reduce poverty.

Status and constraints of costly port rejection : a case from the Vietnamese frozen seafood export industry

While the rising exports have been the source of growth for many developing countries in recent years, the rate of commodities rejected at the ports of developed countries has also been high. Yet why it has remained so despite the costs involved is mostly unknown. This paper takes a case of the frozen seafood export industry in Vietnam and examines the current status of port rejection, roles played by various stakeholders along the value chains, and the constraints faced by the Vietnamese producers and exporters. It concludes with some policy implications, including strengthening the enforcement mechanism of standards compliance particularly at the upstream of the value chain and providing public testing labs for small-scale producers.

Exploring the sources of China's challenge to Japan : models of industrial organisation in the motorcycle industry

In view of the recent rise of China, this paper looks into one of the most important yet relatively overlooked ingredients of the Chinese success: industrial organisation. It will examine the case of the motorcycle industry, in which the rise of Chinese manufacturers even disrupted the established dominance of Japanese industry leaders. Adopting the modified version of the global value chain governance framework, this paper shows that the rise of China has been driven by a distinctive arm’s-length model of industrial organisation, which is in sharp contrast to the conventional captive model that has sustained the Japanese leadership.

The Japanese and Chinese models of industrial organisation : fighting for supremacy in the Vietnamese motorcycle industry

This paper explores the consequences of the emerging rivalry between Japanese and Chinese manufacturers. It focuses specifically on industrial organisation, one of the key factors that underlie the competitiveness of manufacturing industries. The question to be asked is what happens when distinctive models of industrial organisation, coming from Japan and China, clash in a developing country. An in-depth longitudinal analysis of the Vietnamese motorcycle industry adopting a modified version of the global value chain governance theory shows that a decade-long industrial transformation resulted in organisational diversity. The implications of the analysis for the literature on industrial organisation are discussed.

Product-related environmental regulation and voluntary environmental actions : impacts of RoHS and REACH in Malaysia

Voluntary environmental actions, such as the adoption of ISO 14001, are gaining increasing attention in developing countries. This study examines the mechanism of ISO 14001 diffusion in a developing economy on the basis of a unique corporate survey of manufacturing sectors in Malaysia. Product-related environmental regulations, such as REACH, are contributing to this diffusion indirectly by promoting quality control standards such as ISO 9001. The importance of foreign direct investment and global value chains for ISO 14001 diffusion is also confirmed.

Spillover effects of TTIP on BRICS economies : a dynamic GVC-based CGE model

This paper uses a GVC (Global Value Chain)-based CGE model to assess the impact of TTIP between the U.S. and the EU on their main trading partners who are mainly engaged at the low end in the division system of global value chains, such as BRICS countries. The simulation results indicate that in general the TTIP would positively impact global trade and economies due to the reduction of both tariff and non-tariff barriers. With great increases in the US–EU bilateral trade, significant economic gains for the U.S. and the EU can be expected. For most BRICS countries, the aggregate exports and GDP suffer small negative impacts from the TTIP, except Brazil, but the inter-country trade within BRICS economies increases due to the substitution effect between the US–EU trade and the imports from BRICS countries when the TTIP commences.

A Methodological model to assist the optimization and risk management of mining investment decisions

Identifying, quantifying, and minimizing technical risks associated with investment decisions is a key challenge for mineral industry decision makers and investors. However, risk analysis in most bankable mine feasibility studies are based on the stochastic modelling of project “Net Present Value” (NPV)which, in most cases, fails to provide decision makers with a truly comprehensive analysis of risks associated with technical and management uncertainty and, as a result, are of little use for risk management and project optimization. This paper presents a value-chain risk management approach where project risk is evaluated for each step of the project lifecycle, from exploration to mine closure, and risk management is performed as a part of a stepwise value-added optimization process.

Desintegración vertical en la industria del automóvil en España: un caso de estudio = Vertical disintegration in the automotive industry in Spain: a case study

En los años recientes se ha producido un rápido crecimiento del comercio internacional en productos semielaborados que son diseñados, producidos y ensamblados en diferentes localizaciones a lo largo de diferentes países, debido principalmente a los siguientes motivos: el desarrollo de las tecnologías de la información, la reducción de los costes de transporte, la liberalización de los mercados de capitales, la armonización de factores institucionales, la integración económica regional que implica la reducción y la eliminación de las barreras al comercio, el desarrollo económico de los países emergentes, el uso de economías de escala, así como una desregulación del comercio internacional. Todo ello ha incrementado la competencia a nivel mundial en los mercados y ha posibilitado a las compañías tener más facilidad de acceso a potenciales mercados, así como a la adquisición de capacidades y conocimientos en otros países y a la realización de alianzas estratégicas internacionales con terceros, creando un entorno con mayor incertidumbre y más exigente para las compañías que componen una industria, y que tiene consecuencias directas en las operaciones de las compañías y en la organización de su producción. Las compañías, para adaptarse, ser competitivas y beneficiarse de este nuevo escenario globalizado y más competitivo, han externalizado partes del proceso productivo hacia proveedores especializados, creando un nuevo mercado intermedio que divide el proceso productivo, anteriormente integrado en las compañías que conforman una industria, entre dos conjuntos de empresas especializadas en esa industria. Dicho proceso suele ocurrir conservando la industria en que tiene lugar, los mismos servicios y productos, la tecnología empleada y las compañías originales que la conformaban previamente a la desintegración vertical. Todo ello es así debido a que es beneficioso tanto para las compañías originales de la industria como para las nuevas compañías de este mercado intermedio por diversos motivos. La desintegración vertical en una industria tiene unas consecuencias que la transforman completamente, así como la forma de operar de las compañías que la integran, incluso para aquellas que permanecen verticalmente integradas. Una de las características más importantes de esta desintegración vertical en una industria es la posibilidad que tiene una compañía de adquirir a una tercera la primera parte del proceso productivo o un bien semielaborado, que posteriormente será finalizado por la compañía adquiriente con la práctica del outsourcing; así mismo, una compañía puede realizar la primera parte del proceso productivo o un bien semielaborado, que posteriormente será finalizado por una tercera compañía con la práctica de la fragmentación. El principal objetivo de la presente investigación es el estudio de los motivos, los facilitadores, los efectos, las consecuencias y los principales factores significativos, microeconómicos y macroeconómicos, que desencadenan o incrementan la práctica de la desintegración vertical en una industria; para ello, la investigación se divide en dos líneas completamente diferenciadas: el estudio de la práctica del outsourcing y, por otro lado, el estudio de la fragmentación por parte de las compañías que componen la industria del automóvil en España, puesto que se trata de una de las industrias más desintegradas verticalmente y fragmentadas, y este sector posee una gran importancia en la economía del país. En primer lugar, se hace una revisión de la literatura existente relativa a los siguientes aspectos: desintegración vertical, outsourcing, fragmentación, teoría del comercio internacional, historia de la industria del automóvil en España y el uso de las aglomeraciones geográficas y las tecnologías de la información en el sector del automóvil. La metodología empleada en cada uno de ellos ha sido diferente en función de la disponibilidad de los datos y del enfoque de investigación: los factores microeconómicos, utilizando el outsourcing, y los factores macroeconómicos, empleando la fragmentación. En el estudio del outsourcing, se usa un índice basado en las compras externas sobre el valor total de la producción. Así mismo, se estudia su correlación y significación con las variables económicas más importantes que definen a una compañía del sector del automóvil, utilizando la técnica estadística de regresión lineal. Aquellas variables relacionadas con la competencia en el mercado, la externalización de las actividades de menor valor añadido y el incremento de la modularización de las actividades de la cadena de valor, han resultado significativas con la práctica del outsourcing. En el estudio de la fragmentación se seleccionan un conjunto de factores macroeconómicos, comúnmente usados en este tipo de investigaciones, relacionados con las principales magnitudes económicas de un país, y un conjunto de factores macroeconómicos, no comúnmente usados en este tipo de investigaciones, relacionados con la libertad económica y el comercio internacional de un país. Se emplea un modelo de regresión logística para identificar qué factores son significativos en la práctica de la fragmentación. De entre todos los factores usados en el modelo, los relacionados con las economías de escala y los costes de servicio han resultado significativos. Los resultados obtenidos de los test estadísticos realizados en el modelo de regresión logística han resultado satisfactorios; por ello, el modelo propuesto de regresión logística puede ser considerado sólido, fiable y versátil; además, acorde con la realidad. De los resultados obtenidos en el estudio del outsourcing y de la fragmentación, combinados conjuntamente con el estado del arte, se concluye que el principal factor que desencadena la desintegración vertical en la industria del automóvil es la competencia en el mercado de vehículos. Cuanto mayor es la demanda de vehículos, más se reducen los beneficios y la rentabilidad para sus fabricantes. Estos, para ser competitivos, diferencian sus productos de la competencia centrándose en las actividades que mayor valor añadido aportan al producto final, externalizando las actividades de menor valor añadido a proveedores especializados, e incrementando la modularidad de las actividades de la cadena de valor. Las compañías de la industria del automóvil se especializan en alguna o varias de estas actividades modularizadas que, combinadas con el uso de factores facilitadores como las economías de escala, las tecnologías de la información, las ventajas de la globalización económica y la aglomeración geográfica de una industria, incrementan y motivan la desintegración vertical en la industria del automóvil, desencadenando la coespecialización en dos sectores claramente diferenciados: el sector de fabricantes de vehículos y el sector de proveedores especializados. Cada uno de ellos se especializa en unas actividades y en unos productos o servicios específicos de la cadena de valor, lo cual genera las siguientes consecuencias en la industria del automóvil: se reducen los costes de transacción en los productos o servicios intercambiados; se incrementan la relación de dependencia entre fabricantes de vehículos y proveedores especializados, provocando un aumento en la cooperación y la coordinación, acelerando el proceso de aprendizaje, posibilitando a ambos adquirir nuevas capacidades, conocimientos y recursos, y creando nuevas ventajas competitivas para ambos; por último, las barreras de entrada a la industria del automóvil y el número de compañías se ven alteradas cambiando su estructura. Como futura línea de investigación, los fabricantes de vehículos tenderán a centrarse en investigar, diseñar y comercializar el producto o servicio, delegando el ensamblaje en manos de nuevos especialistas en la materia, el contract manufacturer; por ello, sería conveniente investigar qué factores motivantes o facilitadores existen y qué consecuencias tendría la implantación de los contract manufacturer en la industria del automóvil. 1.1. ABSTRACT In recent years there has been a rapid growth of international trade in semi-finished products designed, produced and assembled in different locations across different countries, mainly due to the following reasons: development of information technologies, reduction of transportation costs, liberalisation of capital markets, harmonisation of institutional factors, regional economic integration, which involves the reduction and elimination of trade barriers, economic development of emerging countries, use of economies of scale and deregulation of international trade. All these factors have increased competition in markets at a global level and have allowed companies to gain easier access to potential markets and to the acquisition of skills and knowledge in other countries, as well as to the completion of international strategic alliances with third parties, thus creating a more demanding and uncertain environment for these companies constituting an industry, which has a direct impact on the companies' operations and the organization of their production. In order to adapt, be competitive and benefit from this new and more competitive global scenario, companies have outsourced some parts of their production process to specialist suppliers, generating a new intermediate market which divides the production process, previously integrated in the companies that made up the industry, into two sets of companies specialized in that industry. This process often occurs while preserving the industry where it takes place, its same services and products, the technology used and the original companies that formed it prior to vertical disintegration. This is because it is beneficial for both the industry's original companies and the companies belonging to this new intermediate market, for various reasons. Vertical disintegration has consequences which completely transform the industry where it takes place as well as the modus operandi of the companies that are part of it, even of those who remain vertically integrated. One of the most important features of vertical disintegration of an industry is the possibility for a company to acquire from a third one the first part of the production process or a semi-finished product, which will then be finished by the acquiring company through the practice of outsourcing; also, a company can perform the first part of the production process or a semi-finish product, which will then be completed by a third company through the practice of fragmentation. The main objective of this research is to study the motives, facilitators, effects, consequences and major significant microeconomic and macroeconomic factors that trigger or increase the practice of vertical disintegration in a certain industry; in order to do so, research is divided into two completely differentiated lines: on the one hand, the study of the practise of outsourcing and, on the other, the study of fragmentation by companies constituting the automotive industry in Spain, since this is one of the most vertically disintegrated and fragmented industries and this particular sector is of major significance in this country's economy. First, a review is made of the existing literature, on the following aspects: vertical disintegration, outsourcing, fragmentation, international trade theory, history of the automobile industry in Spain and the use of geographical agglomeration and information technologies in the automotive sector. The methodology used for each of these aspects has been different depending on the availability of data and the research approach: the microeconomic factors, using outsourcing, and the macroeconomic factors, using fragmentation. In the study on outsourcing, an index is used based on external purchases in relation to the total value of production. Likewise, their significance and correlation with the major economic variables that define an automotive company are studied, using the statistical technique of linear regression. Variables related to market competition, outsourcing of lowest value-added activities and increased modularisation of the activities of the value chain have turned out to be significant with the practice of outsourcing. In the study of fragmentation, a set of macroeconomic factors commonly used for this type of research, is selected, related to the main economic indicators of a country, as well as a set of macroeconomic factors, not commonly used for this type of research, which are related to economic freedom and the international trade of a certain country. A logistic regression model is used to identify which factors are significant in the practice of fragmentation. Amongst all factors used in the model, those related to economies of scale and service costs have turned out to be significant. The results obtained from the statistical tests performed on the logistic regression model have been successful; hence, the suggested logistic regression model can be considered to be solid, reliable and versatile; likewise, it is in line with reality. From the results obtained in the study of outsourcing and fragmentation, combined with the state of the art, it is concluded that the main factor that triggers vertical disintegration in the automotive industry is competition within the vehicle market. The greater the vehicle demand, the lower the earnings and profitability for manufacturers. These, in order to be competitive, differentiate their products from the competition by focusing on those activities that contribute with the highest added value to the final product, outsourcing the lower valueadded activities to specialist suppliers, and increasing the modularity of the activities of the value chain. Companies in the automotive industry specialize in one or more of these modularised activities which, combined with the use of enabling factors such as economies of scale, information technologies, the advantages of economic globalisation and the geographical agglomeration of an industry, increase and encourage vertical disintegration in the automotive industry, triggering co-specialization in two clearly distinct sectors: the sector of vehicle manufacturers and the specialist suppliers sector. Each of them specializes in certain activities and specific products or services of the value chain, generating the following consequences in the automotive industry: reduction of transaction costs of the goods or services exchanged; growth of the relationship of dependency between vehicle manufacturers and specialist suppliers, which causes an increase in cooperation and coordination, accelerates the learning process, enables both to acquire new skills, knowledge and resources, and creates new competitive advantages for both; finally, barriers to entry the automotive industry and the number of companies are altered, changing their structure. As a future line of research, vehicle manufacturers will tend to focus on researching, designing and marketing the product or service, delegating the assembly in the hands of new specialists in the field, the contract manufacturer; for this reason, it would be useful to investigate what motivating or facilitating factors exist in this respect and what consequences would the implementation of contract manufacturers have in the automotive industry.

Mechanical Characterization of Multicrystalline Silicon Substrates for Solar Cell Applications

The possibility of using more economical silicon feedstock, i.e. as support for epitaxial solar cells, is of interest when the cost reduction and the properties are attractive. We have investigated the mechanical behaviour of two blocks of upgraded metallurgical silicon, which is known to present high content of impurities even after being purified by the directional solidification process. These impurities are mainly metals like Al and silicon compounds. Thus, it is important to characterize their effect in order to improve cell performance and to ensure the survival of the wafers throughout the solar value chain. Microstructure and mechanical properties were studied by means of ring on ring and three point bending tests. Additionally, elastic modulus and fracture toughness were measured. These results showed that it is possible to obtain marked improvements in toughness when impurities act as microscopic internal crack arrestors. However, the same impurities can be initiators of damage due to residual thermal stresses introduced during the crystallization process.

Mechanical characterization of multicrystalline silicon wafers

The possibility of using more economical silicon feedstock, i.e. as support for epitaxial solar cells, is of interest when the cost reduction and the properties are attractive. We have investigated the mechanical behavior of two blocks of upgraded metallurgical silicon, which is known to present high content of impurities even after being purified by the directional solidification process. The impurities are mainly metals like Al and silicon compounds. Thus, it is important to characterize their effect in order to improve cell performance and to ensure the survival of the wafers throughout the solar value chain. Microstructure and mechanical properties were studied by means of ring on ring and three point bending tests. Additionally, Young’s modulus, hardness and fracture toughness were measured. These results showed that it is possible to obtain marked improvements in toughness when impurities act as microscopic internal crack arrestors. However, the same impurities can be initiators of damage due to residual thermal stresses introduced during the crystallization process.