Propulsion products services laakerikunnonvalvonnan ansaintalogiikan kehittäminen

Tämän työn ensisijaisena tavoitteena on selvittää ABB Oy, Marine & Cranes, Propulsion Products Services tarjoamien laakerikunnonvalvontatuotteiden luonne, tuotteistuksen tila, liiketoimintamalli ja tutkia, kuinka olemassa olevaa ansaintalogiikkaa voidaan kehittää. Teoreettisessa osassa käydään läpi palvelun määritelmää, palveluiden tuotteistamista, akateemisia tuotteistusprosessimalleja sekä liiketoimintamallin käsitettä. Liiketoimintamallin käsittely työssä keskittyy Osterwalderin (2010) liiketoimintamallikehykseen. Teoriaosuuden materiaalia hyödynnetään empiirisessä osuudessa laakerikunnonvalvonnan tuotteiden tuotteistuksen tilan, tuotteistusprosessimallin, liiketoimintamallin ja ansaintalogiikan kehittämiseen. Työn keskeisimpinä tuloksina saatiin kehitysehdotuksia työntilaajalle liittyen laakerikun- nonvalvonnan ansaintalogiikkaan ja palveluiden tuotteistamiseen. Työssä ilmeni, että yrityksen olisi suositeltavaa optimoida tehtävien palveluiden suorittamissatamat. Jo olemassa olevien tuotteiden dokumentointia tulisi täydentää työssä ehdotetun mukaisesti. Omien resurssien laajempaa käyttämistä tulisi lisätä ja laakerikunnonvalvonnan palvelupakettien päivittämistarve sekä valmiiden tuotteiden säännöllinen päivittäminen ja niiden mahdollinen poistaminen valikoimasta tulisi ottaa osaksi käytössä olevaa prosessia.

Betonielementtien myynnin ja markkinoinnin kehittäminen

Työllä oli kaksi tavoitetta: tutkia betonielementtejä valmistavan Lipa-Betoni Oy:n myynnin ja markkinoinnin tilaa sekä laatia markkinointisuunnitelma Sepa Oy:n kanssa yhteistyössä kehitetylle puubetonivälipohjalaatalle. Tutkimus jakautui nähden tavoitteiden mukaisiin tutkimusosioihin. Rakennusalan markkinointi, tarkemmin betonielementtien markkinointi, voidaan suurelta osin nähdä projektien markkinointina. Siksi työn teoriaosuudessa käsiteltiin rakennusalan markkinointia projektimarkkinoinnin näkökulmasta; erityispiirteitä, vaiheita, referenssien ja asiakassuhteiden merkitystä sekä proaktiivista markkinointistrategiaa. Lisäksi tutkittiin markkinoinnin suunnitteluun, markkinoinnin kilpailukeinoihin sekä markkinoinnin tehokkuuden mittaamiseen liittyviä teorioita. Työn tuloksena esitettiin kehitysehdotukset Lipa-Betoni Oy:n myynnin ja markkinoinnin tehostamiseksi. Konkreettisimmat tulokset tästä tutkimusosiosta ovat asiakkuuksien hoitomalli segmenteittäin ja markkinoinnin tehokkuuden mittaristo. Kehitysehdotuksien yhteenvetona laadittiin Lipa-Betoni Oy:n markkinoinnin prosessimalli. Puubetonivälipohjalaatalle laadittiin markkinointisuunnitelma. Puubetonivälipohjalaatan markkinoinnissa korostuu proaktiivinen markkinointistrategia, jonka avulla saadaan tärkeitä referenssejä tukemaan tulevaisuuden markkinointityötä.

Modeling of high pressure pretreatment process for gold leaching

Investigation of high pressure pretreatment process for gold leaching is the objective of the present master's thesis. The gold ores and concentrates which cannot be easily treated by leaching process are called "refractory". These types of ores or concentrates often have high content of sulfur and arsenic that renders the precious metal inaccessible to the leaching agents. Since the refractory ores in gold manufacturing industry take a considerable share, the pressure oxidation method (autoclave method) is considered as one of the possible ways to overcome the related problems. Mathematical modeling is the main approach in this thesis which was used for investigation of high pressure oxidation process. For this task, available information from literature concerning this phenomenon, including chemistry, mass transfer and kinetics, reaction conditions, applied apparatus and application, was collected and studied. The modeling part includes investigation of pyrite oxidation kinetics in order to create a descriptive mathematical model. The following major steps are completed: creation of process model by using the available knowledge; estimation of unknown parameters and determination of goodness of the fit; study of the reliability of the model and its parameters.

Liiketoimintatiedonhallinta strategisen suunnittelun tietolähteenä, Case: OP-Pohjola-ryhmä

Finanssiala on kokonaisuutena suurten muutosten ja vaatimusten kohteena. Toisaalta globalisaatio ja kehittyvä tietotalous antavat toiminnalle suuria mahdollisuuksia, toisaalta finanssikriisin jälkeistä aikaa on leimannut perinteisen korkokatteen supistuminen ja uusien tulonlähteiden etsintä. Entistä tehokkaampi tietojenkäsittely ja asiakastietojen hyväksikäyttö luo edellytyksiä toimia alalla entistä tehokkaammin ja ohjata yrityksen päätöksentekoa tiedolla. Tämän pro gradu –tutkielman tavoitteena oli tutkia tiedon roolia OP-Pohjola-ryhmän strategiaprosessissa ja luoda malli, jolla liiketoimintatietoa pystyttäisi käyttämään tehokkaammin ja tarkoituksenmukaisemmin hyväksi strategiatyössä. Tutkielma toteutettiin tapaustutkimuksena ja empiirinen aineisto hankittiin haastattelemalla organisaation strategiaprosessiin osallistuvia tahoja. Tutkimuksen tulosten mukaan OP-Pohjola-ryhmällä ei ole määrämuotoista tapaa käyttää hyväksi liiketoimintatiedonhallinnan tuottamaa dataa. Strategiaprosessin päätöksenteossa merkittävä rooli on yksilöiden toisaalta omista organisaatioista tuottaman liiketoimintatiedon ja toisaalta yksilöiden hiljaisen tiedon varassa. Tutkimuksen lopputuloksena luotiin malli, jolla strategiaprosessiin tuotetaan tietoa määrämuotoisen ja toistettavan prosessin kautta.

Customer knowledge processing in maintenance business: case study

The purpose of the study is to examine and increase knowledge on customer knowledge processing in B2B context from sales perspective. Further objectives include identifying possible inhibiting and enabling factors in each phase of the process. The theoretical framework is based on customer knowledge management literature. The study is a qualitative study, in which the research method utilized is a case study. The empirical part was implemented in a case company by conducting in-depth interviews with the company’s value-selling champions located internationally. Context was maintenance business. Altogether 17 interviews were conducted. The empirical findings indicate that customer knowledge processing has not been clearly defined within the maintenance business line. Main inhibiting factors in acquiring customer knowledge are lack of time and vast amount of customer knowledge received. Enabling factors recognized are good customer relationships and sales representatives’ communication skills. Internal dissemination of knowledge is mainly inhibited by lack of time and restrictions in customer relationship management systems. Enabling factors are composition of the sales team and updated customer knowledge. Inhibiting utilization is lack of goals to utilize the customer knowledge and a low quality of the knowledge. Moreover, customer knowledge is not systematically updated nor analysed. Management of customer knowledge is based on the CRM system. As implications of the study, it is suggested for the case company to define customer knowledge processing in order to support maintenance business process.

Generating competitive advantage through competitor information systems

This pro gradu –thesis discusses generating competitive advantage through competitor information systems. The structure of this thesis follows the structure of the WCA model by Alter (1996). In the WCA model, business process is influenced by three separate but connected elements: information, technology, and process participants. The main research question is how competitor information can be incorporated into or made into a tool creating competitive advantage. Research subquestions are: How does competitor information act as a part of the business process creating competitive advantage? How is a good competitor information system situated and structured in an organisation? How can management help information generate competitive advantage in the business process with participants, information, and technology? This thesis discusses each of the elements separate, but the elements are connected to each other and to competitive advantage. Information is discussed by delving into competitor information and competitor analysis. Competitive intelligence and competitor analysis requires commitment throughout the organisation, including top management, the desire to perform competitive intelligence and the desire to use the end products of that competitive intelligence. In order to be successful, systematic competitive intelligence and competitor analysis require vision, willingness to strive for the goals set, and clear strategies to proceed. Technology is discussed by taking a look into the function of the competitor information systems play and the place they occupy within an organization. In addition, there is discussion about the basic infrastructure of competitor information systems, and the problems competitor information systems can have plaguing them. In order for competitor information systems to be useful and worthy of the resources it takes to develop and maintain them, competitor information systems require on-going resource allocation and high quality information. In order for competitor information systems justify their existence business process participants need to maintain and utilize competitor information systems on all levels. Business process participants are discussed through management practices. This thesis discusses way to manage information, technology, and process participants, when the goal is to generate competitive advantage through competitor information systems. This is possible when information is treated as a resource with value, technology requires strategy in order to be successful within an organization, and process participants are an important resource. Generating competitive advantage through competitor information systems is possible when the elements of information, technology, and business process participants all align advantageously.

Cell Model Systems in Characterizing Alpha2-Adrenoceptors as Drug Targets.

The three alpha2-adrenoceptor (alpha2-AR) subtypes belong to the G protein-coupled receptor superfamily and represent potential drug targets. These receptors have many vital physiological functions, but their actions are complex and often oppose each other. Current research is therefore driven towards discovering drugs that selectively interact with a specific subtype. Cell model systems can be used to evaluate a chemical compound's activity in complex biological systems. The aim of this thesis was to optimize and validate cell-based model systems and assays to investigate alpha2-ARs as drug targets. The use of immortalized cell lines as model systems is firmly established but poses several problems, since the protein of interest is expressed in a foreign environment, and thus essential components of receptor regulation or signaling cascades might be missing. Careful cell model validation is thus required; this was exemplified by three different approaches. In cells heterologously expressing alpha2A-ARs, it was noted that the transfection technique affected the test outcome; false negative adenylyl cyclase test results were produced unless a cell population expressing receptors in a homogenous fashion was used. Recombinant alpha2C-ARs in non-neuronal cells were retained inside the cells, and not expressed in the cell membrane, complicating investigation of this receptor subtype. Receptor expression enhancing proteins (REEPs) were found to be neuronalspecific adapter proteins that regulate the processing of the alpha2C-AR, resulting in an increased level of total receptor expression. Current trends call for the use of primary cells endogenously expressing the receptor of interest; therefore, primary human vascular smooth muscle cells (SMC) expressing alpha2-ARs were tested in a functional assay monitoring contractility with a myosin light chain phosphorylation assay. However, these cells were not compatible with this assay due to the loss of differentiation. A rat aortic SMC cell line transfected to express the human alpha2B-AR was adapted for the assay, and it was found that the alpha2-AR agonist, dexmedetomidine, evoked myosin light chain phosphorylation in this model.

Enabling Change in Universities: Enhancing Education for Sustainable Development with Tools for Quality Assurance

Enabling Change in Universities: Enhancing Education for Sustainable Development with Tools for Quality Assurance This thesis deals with enabling change in universities, more explicitly enhancing education for sustainable development with tools for quality assurance. Change management is a discipline within management that was developed in the 1980s because business changed from being predictable to unpredictable. The PEST mnemonic is a method to categorize factors enabling change; such as political, economic, socio-cultural and technological factors, which all affect higher education. A classification of a change, in either hard or soft, can help understanding the type of change that an organization is facing. Hard changes are more applied to problems that have clear objectives and indicators, with a known cause of the problem. Soft changes are applied to larger problems that affect the entire organization or beyond it. The basic definition for sustainable development is: the future generations should have similar opportunities as the previous. The UN has set as a global goal an integration of education for sustainable development (ESD) at all levels of education during 2005- 2014. The goal is set also in universities, the graduates of which are future leaders for all labor markets. The objective for ESD in higher education is that graduates obtain the competence to take economic, social and environmental costs and benefits into account when making decisions. Knowledge outcomes should aim for systematic and holistic thinking, which requires cross disciplinary education. So far, the development of ESD has not achieved its goals. The UN has identified a need for more transdisclipnary research in ESD. A joint global requirement for universities is quality assurance, the aim of which is to secure and improve teaching and learning. Quality, environmental and integrated management systems are used by some universities for filling the quality assurance requirements. The goal of this thesis is to open up new ways for enhancing ESD in universities, beyond the forerunners; by exploring how management systems could be used as tools for promoting ESD. The thesis is based on five studies. In the first study, I focus on if and how tools for quality assurance could be benefitted for promoting ESD. It is written from a new perspective, the memetic, for reaching a diversity of faculty. A meme is an idea that diffuses from brain to brain. It can be applied for cultural evolution. It is a theory that is based on the evolutionary theory by Darwin, applied for social sciences. In the second Paper, I present the results from the development of the pilot process model for enhancing ESD with management systems. The development of the model is based on a study that includes earlier studies, a survey in academia and an analysis of the practice in 11 universities in the Nordic countries. In the third study, I explore if the change depends on national culture or if it is global. It is a comparative study on both policy and implementation level, between the Nordic countries and China. The fourth study is a single case study based on change management. In this study, I identify what to consider in order to enable the change: enhancing ESD with tools for quality assurance in universities. In the fifth Paper, I present the results of the process model for enhancing ESD with management systems. The model was compared with identified drivers and barriers for enhancing ESD and for implementing management systems. Finally, the process model was piloted and applied for identifying sustainability aspects in curricula. Action research was chosen as methodology because there are not already implemented approaches using quality management for promoting ESD, why the only way to study this is to make it happen. Another reason for choosing action research is since it is essential to involve students and faculty for enhancing ESD. Action based research consists of the following phases: a) diagnosing, b) planning action, c) taking action and d) evaluating action. This research was made possible by a project called Education for Sustainable Development in Academia in the Nordic countries, ESDAN, in which activities were divided into these four phases. Each phase ended with an open seminar, where the results of the study were presented. The objective for the research project was to develop a process for including knowledge in sustainable development in curricula, which could be used in the quality assurance work. Eleven universities from the Nordic countries cooperated in the project. The aim was, by applying the process, to identify and publish examples of relevant sustainability aspects in different degree programs in universities in the Nordic countries. The project was partly financed by the Nordic Council of Ministers and partly by the participating pilot universities. Based on the results of my studies, I consider that quality, environmental and integrated management systems can be used for promoting ESD in universities. Relevant sustainability aspects have been identified in different fields of studies by applying the final process model. The final process model was compared with drivers and barriers for enhancing ESD and for implementing management systems in universities and with succeeding with management systems in industry. It corresponds with these, meaning that drivers are taken into account and barriers tackled. Both ESD and management systems in universities could be considered successful memes, which can reflect an effective way of communication among individuals. I have identified that management systems could be used as tools for hard changes and to support the soft change of enhancing ESD in universities with management system. Based on the change management study I have summarized recommendations on what to consider in order to enable the studied change. The main practical implications of the results are that the process model could be applied for assessment, benchmarking and communication of ESD, connected to quality assurance, when applied. This is possible because the information can be assembled in one picture, which facilitates comparison. The memetic approach can be applied for structuring. It is viable to make comparative studies between cultures, for getting insight in special characteristics of the own culture. Action based research is suitable for involving faculty. Change management can be applied for planning a change, which both enhancing ESD and developing management systems are identified to be.

Particle model for simulating limestone reactions in novel fluidised bed energy applications

The development of carbon capture and storage (CCS) has raised interest towards novel fluidised bed (FB) energy applications. In these applications, limestone can be utilized for S02 and/or CO2 capture. The conditions in the new applications differ from the traditional atmospheric and pressurised circulating fluidised bed (CFB) combustion conditions in which the limestone is successfully used for SO2 capture. In this work, a detailed physical single particle model with a description of the mass and energy transfer inside the particle for limestone was developed. The novelty of this model was to take into account the simultaneous reactions, changing conditions, and the effect of advection. Especially, the capability to study the cyclic behaviour of limestone on both sides of the calcination-carbonation equilibrium curve is important in the novel conditions. The significances of including advection or assuming diffusion control were studied in calcination. Especially, the effect of advection in calcination reaction in the novel combustion atmosphere was shown. The model was tested against experimental data; sulphur capture was studied in a laboratory reactor in different fluidised bed conditions. Different Conversion levels and sulphation patterns were examined in different atmospheres for one limestone type. The Conversion curves were well predicted with the model, and the mechanisms leading to the Conversion patterns were explained with the model simulations. In this work, it was also evaluated whether the transient environment has an effect on the limestone behaviour compared to the averaged conditions and in which conditions the effect is the largest. The difference between the averaged and transient conditions was notable only in the conditions which were close to the calcination-carbonation equilibrium curve. The results of this study suggest that the development of a simplified particle model requires a proper understanding of physical and chemical processes taking place in the particle during the reactions. The results of the study will be required when analysing complex limestone reaction phenomena or when developing the description of limestone behaviour in comprehensive 3D process models. In order to transfer the experimental observations to furnace conditions, the relevant mechanisms that take place need to be understood before the important ones can be selected for 3D process model. This study revealed the sulphur capture behaviour under transient oxy-fuel conditions, which is important when the oxy-fuel CFB process and process model are developed.

Asiakaskokemuksen vaikutus liiketoimintaprosessien kehittämiseen

Tämä diplomityö toteutettiin Auto-Kilta Trucks Oy:lle. Tutkimus toteutettiin kvalitatiivisena tapaustutkimuksena. Tutkimuksessa käytettiin havainnointia ja perehdyttiin nykyisiin prosessikuvauksiin. Lähivuosina yrityksessä tulee tapahtumaan asiakasrajapinnassa eläköitymisiä eikä samanlaista ammatillista kokemusta ole helposti saatavilla. Taloudellinen tilanne ei mahdollista lisäresurssien palkkaamista vaan yrityksen asiakasrajapintaan tulee saada yrityksen sisältä voimavaroja. Yrityksen mekaanikoista on tarkoitus saada ratkaisu asiakasrajapinnassa tapahtuviin muutoksiin. Asiakaskokemuksen kautta haetaan ymmärrystä oman toiminnan kehittämiseen. Liiketoimintaprosessien tulee tukea asiakaskokemuksen luomista. Muutosjohtamisen keinoin on tarkoitus viedä prosesseihin muutos työskentelytavoista sekä saada työntekijät ajattelemaan asiakaslähtöisesti. Lopputuloksena esitetään asiakasrajapintaan uusi prosessimalli, joka tukee asiakaskokemuksen luomista. Yrityksessä on tärkeää ymmärtää asiakkaan oikea tarve käyttää yrityksen palveluja.

Metsäteollisuuden puunhankinnan ohjaus: Hankintalähteen kannattavuus ja siihen vaikuttavat tekijät

Tutkielmassa rakennettiin laskentamalli metsäteollisuuden puunhankinnan hankintalähteen kannattavuuden määrittämiseksi ja selittämiseksi. Tutkimuksessa noudatettiin konstruktiivisen tapaustutkimuksen tutkimusotetta. Tutkimuksen kohdeorganisaationa oli kansainvälisesti toimivan metsäteollisuusyrityksen Suomen puunhankintaorganisaatio. Kannattavuusmalli määrittelee hankintalähteen kannattavuuden sekä käsitteellisellä että laskentamenettelyn tasolla. Kannattavuusmallin katesuure on porttikate, joka rakennettiin taloudellisen lisäarvon teoriaan nojaten kohdeorganisaation tarpeiden ja sen laskenta-asiantuntijoiden näkemysten perusteella. Kannattavuusmallin rakenne ja osat kuvattiin seikkaperäisesti. Kannattavuusmallin käyttämän liiketoimintadatan poiminta ja laskentasuureiden raportointi testattiin. Mallin tarvitsemat laskentatiedot on saatavissa kohdeorganisaation kehitteillä olevasta toiminnanohjausjärjestelmästä. Laskentamallin hyödyntämismahdollisuudet arvioitiin. Hankintalähteen kannattavuutta mittaavalla porttikatteella voidaan ohjata puunhankintaorganisaatiota sen tavoitteiden saavuttamisessa. Malli ilmaisee porttikatteeseen vaikuttavien tekijöiden vaikutuksen kannattavuuteen, minkä avulla voidaan tehdä parempia päätöksiä hankintalähteiden hyödyntämisessä. Aiemmista tutkimuksista poiketen malli huomioi hankintalähteen suoritteen arvon tärkeimmille asiakastehtaille perustuen todellisiin liiketapahtumiin. Kannattavuusmallia voidaan hyödyntää laajalti metsäteollisuusyritysten tavaralajimenetelmään perustuvassa puunhankinnassa. Kannattavuusmallin rakentaminen rohkaisee puunhankinnan johtoa ja laskentahenkilöitä hedelmällisen yhteistyöhön.

Successful IFRS standard change implementation process after the initial IFRS implementation

The main objective of the study was to form a strategic process model and project management tool to help IFRS change implementation projects in the future. These research results were designed based on the theoretical framework of Total Quality Management and leaning on the facts that were collected during the empirical case study of IAS 17 change. The us-age of the process oriented approach in IFRS standard change implementation after the initial IFRS implementation is rationalized with the following arguments: 1) well designed process tools lead to optimization of resources 2) With the help of process stages and related tasks it is easy to ensure the efficient way of working and managing the project as well as make sure to include all necessary stakeholders to the change process. This research is following the qualitative approach and the analysis is in describing format. The first part of the study is a literature review and the latter part has been conducted as a case study. The data has been col-lected in the case company with interviews and observation. The main findings are a process model for IFRS standard change process and a check-list formatted management tool for up-coming IFRS standard change projects. The process flow follows the main cornerstones in IASB’s standard setting process and the management tool has been divided to stages accordingly.

Designing of Balanced Performance Measurement System to Purchasing Process

The performance measurement produces information about the operation of the business process. On the basis of this information performance of the company can be followed and improved. Balanced performance measurement system can monitor performance of several perspectives and business processes can be led according to company strategy. Major part of the costs of a company is originated from purchased goods or services are an output of the buying process emphasising the importance of a reliable performance measurement of purchasing process. In the study, theory of balanced performance measurement is orientated and framework of purchasing process performance measurement system is designed. The designed balanced performance measurement system of purchasing process is tested in case company paying attention to the available data and to other environmental enablers. The balanced purchasing performance measurement system is tested and improved during the test period and attention is paid to the definition and scaling of objectives. Found development initiatives are carried out especially in the scaling of indicators. Finally results of the study are evaluated, conclusions and additional research areas proposed.

Liiketoimintalähtöisen hävikinhallintastrategian kehittäminen

Tämän pro gradu -tutkimuksen tavoitteena oli kehittää case-yritykselle strategiaproses-simalli liiketoimintalähtöisen hävikinhallintastrategian määrittelemiseksi sekä tunnistaa hävikinhallinnan strategisen johtamisen kannalta oleellisimmat tehtävät määriteltyjen hävikinhallintastrategian päämäärien ja tavoitteiden toteuttamiseksi. Lisäksi case-yrityksen johto asetti tavoitteeksi tunnistaa tutkimuksen perusteella parhaiten yritykselle soveltuva hävikinhallinnan mallin, joka voidaan liittää osaksi määriteltävää strategiaa. Yhteisen hävikinhallintastrategian ja hävikinhallintamallin uskotaan yhtenäistävän hävikinhallintaan liittyvää ajattelua, tavoitteita ja päämääriä sekä laajentavan hävikkikäsitteen näkökulmia että systematisoivan hävikinhallintatyötä case-yritystä ympäröivässä liiketoimintaverkostossa. Tutkimuksessa käsitellään strategiseen johtamiseen sekä hävikinhallinnan teoriaa ja esitellään case-yrityksen hävikinhallinnan nykytilaa sekä erityispiirteitä. Lisäksi tarkas-tellaan hävikinhallinnan strategisen johtamisen nykytilaa ja sen kehittämistä merkittä-vissä suomalaisissa vähittäiskaupan yrityksissä. Tämän jälkeen teoriaosuudessa tun-nistettuja elementtejä peilataan empiria osuuden havaintoihin. Tutkimustuloksien im-plementointi kohdassa on tunnistettu keskeisimmät kohteet, jotka strategisen johtami-sen teoriamalleista sekä käytännöistä verrokkiyrityksissä olisi hyödynnettävissä hävi-kinhallinnan strategisen johtamisen kehittämiseen case-yrityksessä. Tutkimus toteutettiin kvalitatiivisen tutkimusmenetelmän avulla. Aineisto kerättiin strukturoitujen teemahaastattelujen avulla. Haastatteluaineisto analysoitiin luokittelemalla havainnot kirjallisuustutkimuksessa tunnistettuihin teemoihin Tutkimustulokset tukivat kirjallisuudessa esitettyä näkemystä siitä miten pyritään var-mistamaan liiketoimintalähtöisyys yrityksen tukipalvelustrategioissa. Yrityksen ylimmän johdon tulee linjata hävikinhallintatyön tavoitteet joko strategiaprosessin alussa tai strategiahierarkiassa ylempien liiketoimintastrategioiden kautta. Tämän jälkeen hävikinhallintastrategia määritellään huomioiden annetut tavoitteet ja saadaan tukemaan organisaation yhteisiä päämääriä sekä tavoitteita että tuottamaan lisäarvoa liiketoiminnalle.

Balancing the quotation process by LEAN methods

This thesis studies the possibility to use lean tools and methods in a quotation process which is carried out in an office environment. The aim of the study was to find out and test the relevant lean tools and methods which can help to balance and standardize the quotation process, and reduce the variance in quotation lead times and in quality. Seminal works, researches and guide books related to the topic were used as the basis for the theory development. Based on the literature review and the case company’s own lean experience, the applicable lean tools and methods were selected to be tested by a sales support team. Leveling production, by product categorization and value stream mapping, was a key method to be used to balance the quotation process. 5S method was started concurrently for standardizing the work. Results of the testing period showed that lean tools and methods are applicable in office process and selected tools and methods helped to balance and standardize the quotation process. Case company’s sales support team decided to implement new lean based quotation process model.