Coping with Technology: A Study on Economic Methodology and Strategic Management of Technology

There is a broad consensus among economists that technologicalchange has been a major contributor to the productivity growth and, hence, to the growth of the material welfare in western industrialized countries at least over the last century. Paradoxically, this issue has not been the focal point of theoretical economics. At the same time, we have witnessed the rise of the importance of technological issues at the strategic management level of business firms. Interestingly, the research has not accurately responded to this challenge either. The tension between the overwhelming empirical evidence of the importance of technology and its relative omission in the research offers a challenging target for a methodological endeavor. This study deals with the question of how different theories cope with technology and explain technological change. The focusis at the firm level and the analysis concentrates on metatheoretical issues, except for the last two chapters, which examine the problems of strategic management of technology. Here the aim is to build a new evolutionary-based theoreticalframework to analyze innovation processes at the firm level. The study consistsof ten chapters. Chapter 1 poses the research problem and contrasts the two basic approaches, neoclassical and evolutionary, to be analyzed. Chapter 2 introduces the methodological framework which is based on the methodology of isolation. Methodological and ontoogical commitments of the rival approaches are revealed and basic questions concerning their ways of theorizing are elaborated. Chapters 3-6 deal with the so-called substantive isolative criteria. The aim is to examine how different approaches cope with such critical issues as inherent uncertainty and complexity of innovative activities (cognitive isolations, chapter 3), theboundedness of rationality of innovating agents (behavioral isolations, chapter4), the multidimensional nature of technology (chapter 5), and governance costsrelated to technology (chapter 6). Chapters 7 and 8 put all these things together and look at the explanatory structures used by the neoclassical and evolutionary approaches in the light of substantive isolations. The last two cpahters of the study utilize the methodological framework and tools to appraise different economics-based candidates in the context of strategic management of technology. The aim is to analyze how different approaches answer the fundamental question: How can firms gain competitive advantages through innovations and how can the rents appropriated from successful innovations be sustained? The last chapter introduces a new evolutionary-based technology management framework. Also the largely omitted issues of entrepreneurship are examined.

Environmental requirements and environmental management system of boiler plant supplier

Työn tärkeimpänä tavoitteena oli edistää ympäristöjärjestelmän laatimista Kvaerner Pulping, Power divisioonan Kattilat-liiketoimintayksikölle. Lisäksi tavoitteena oli tarkastella yritykseen kohdistuvia ympäristövaatimuksia ja niiden vaikutusta yrityksen toimintaan. Aluksi työssä tarkasteltiin ympäristöjärjestelmästandardien sisältöjä ja niiden eroja. Työssä käsiteltiin myös erilaisia elinkaarijohtamisen malleja, joita voidaan hyödyntää yrityksen kokonaisvaltaisessa ympäristöjärjestelmässä. Työssä tarkasteltiin myös sidosryhmien vaikutusta yrityksen ympäristötoimintaan. Kattilalaitostoimittajan tärkeimpiä asiakkaita ovat sellu- ja paperiteollisuus. Näihin yrityksiin on kohdistunut runsaan kymmenen vuoden aikana paineita ympäristötoiminnan tehostamiseksi. Tämän kehityksen seurauksena vastaavat tehostamispaineet ovat siirtymässä myös alihankkijoille, kuten kattilaitostoimittajille. Tehokkaan ympäristöjohtamisen takaamiseksi työssä määriteltiin ympäristövastuut ja –valtuudet sekä ympäristöpäämäärät ja –tavoitteet. Lisäksi tunnistettiin yrityksen toimintaan liittyvät ympäristönäkökohdat ja –riskit. Työn yhteydessä laadittiin ympäristöjärjestelmän luonnos, ja se sisältää jatkuvan parantamisen periaatteen. Työn yhteydessä laadittiin lisäksi Kvaerner Pulping Oy:n koelaitokselle ympäristölupahakemus. Työssä on kuvattu koelaitosta ja sen ympäristölupahakemukseen liittyviä asioita esimerkkinä parantuneesta ympäristöasioiden hoidosta.

Reporting for account and sales management

Tutkimuksen tavoitteena oli kerätä Elcoteq Network Oyj:n myyntihenkilöiden tietotarpeet ja konkretisoida ne raportoinnin kautta. Tutkimus keskittyi asiakasvirran eri vaiheissa tarvittavaan asiakas- ja projektikohtaiseen tietoon. Tarkoituksena oli parantaa raportointia vastaamaan asiakkaan ja sales case:n hallintaa alkaen asiakasvirran uusasiakasvaiheesta ja projektin arvioinnista. Tietotarpeet kerättiin haastattelujen avulla ja osallistumalla aiheeseen liittyviin projekteihin. Haastattelujen ja teorian avulla projektiliiketoiminnan avainpiirteet ja asiakaskannattavuuteen vaikuttavat tekijät kerättiin yhteen ja muutettiin konkretiaksi raportoinnin parannusehdotuksien kautta. Tutkimus osoitti, että myyntihenkilöiden näkökulmasta olisi muodostettava uudet raportit tukemaan asiakkaan ja projektin hallintaa. Ennustettu voidaan verrata toteutuneeseen ja sekä asikkuuden, että sales case:n seuranta paranee uusien raporttien avulla. Budjetit, sekä asiakaskohtaiset tavoitteet voidaan laatia luotettavimmin ja kokonaiskuva asiakkuuden ja projektin kannattavuudesta pystytään näkemään ko. raporteista sekä graafein, että numeerisena tietona.

Procurement and inventory management in product ramp down

Tuotteiden elinkaaret elektroniikkateollisuudessa ovat lyhentyneet entisestään. Paineet uusien kehittyneempien tuotteiden lanseeraamiselle ovat kasvaneet. Huonosti hoidettu tuotevaihto voi aiheuttaa merkittäviä kustannuksia yritykselle mikäli alasajon kustannusvaikutusta tulokseen aliarvioidaan. Työ käsittelee markkinoilta poistuvan tuotteen materiaalivirtojen hallintaa tuotevaihdon aikana. Lähtökohtana työssä oli kehittää toimintatapa miten tuotteen alasajon aikana tulisi toimia sekä mallintaa hankintaketju riskien ja pullonkaulojen löytämiseksi. Päätavoitteena oli materiaalivaraston arvon minimoiminen sekä ylijäämämateriaalien hyödyntäminen. Työn merkittävimpiä tuloksia oli hankintaketjun materiaalivirtojen seurantaan kehitetty Excel työkalu sekä alasajon liittyvien työvaiheiden kuvaaminen.

The Key Features of Knowledge and Knowledge Management in Product Development Process

Tutkimusongelmana oli kuinka tiedon johtamisella voidaan edesauttaa tuotekehitysprosessia. Mitkä ovat ne avaintekijät tietoympäristössä kuin myös itse tiedossa, joilla on merkitystä erityisesti tuotekehitysprosessin arvon muodostumiseen ja prosessien kehittämiseen? Tutkimus on laadullinen Case-tutkimus. Tutkimusongelmat on ensin selvitetty kirjallisuuden avulla, jonka jälkeen teoreettinen viitekehys on rakennettu tutkimaan rajattua ongelma-aluetta case-yrityksestä. Empiirisen tutkimuksen materiaali koostuu pääasiallisesti henkilökohtaisten teemahaastattelujen aineistosta. Tulokset merkittävimmistä tiedon hyväksikäytön haittatekijöistä, kuten myös parannusehdotukset on lajiteltu teoreettisessa viitekehyksessä esitettyjen oletustekijöiden mukaan. Haastatteluissa saadut vastaukset tukevat kirjallisuudesta ja alan ammattilaiselta saatua käsitystä tärkeimmistä vaikuttavista tekijöistä. Tärkeimmät toimenpiteet ja aloitteet joilla parannettaisiin tiedon muodostumista, koskivat ennnen kaikkea työnteon ulkoisia olosuhteita, eikä niinkään tiedon muodostumisen prosessia itseään. Merkittävimpiä haittatekijöitä olivat kultturiin, fyysiseen ja henkiseen tilaan ja henkilöstöresursseihin liittyvät ongelmat. Ratkaisuja ongelmiin odotettiin saatavan lähinnä tietotekniikan, henkilöstöresurssien ja itse tiedon muokkaamisen avulla. Tuotekehitysprosessin ydin tietovirtojen ja –pääomien luokittelu ja tulkitseminen tiedon muodostusta kuvaavan Learning Spiralin avulla antoi lähinnä teoreettisia viitteitä siitä millaisia keinoja on olemassa tiedon lisäämiseen ja jakamiseen eri tietotyypeittäin. Tulosten perusteella caseyrityksessä pitäisi kiinnittää erityistä huomiota tiedon dokumentointiin ja jakamiseen erityisesti sen tiedon osalta, joka on organisaatiossa vain harvalla ja/tai luonteeltaan hyvin tacitia.

Describing and Analyzing Information Technology through Total Quality Management and Process Management: Case Stora Enso Newsprint

Laatu on osaltaan vahvistamassa asemaansa liike-elämässä yritysten kilpaillessa kansainvälisillä markkinoilla niin hinnalla kuin laadulla. Tämä suuntaus on synnyttänyt useita laatuohjelmia, joita käytetään ahkerasti yritysten kokonais- valtaisen laatujohtamisen (TQM) toteuttamisessa. Laatujohtaminen kattaa yrityksen kaikki toiminnot ja luo vaatimuksia myös yrityksen tukitoimintojen kehittämiselle ja parantamiselle. Näihin lukeutuu myös tämän tutkimuksen kohde tietohallinto (IT). Tutkielman tavoitteena oli kuvata IT prosessin nykytila. Tutkielmassa laadittu prosessikuvaus pohjautuu prosessijohtamisen teoriaan ja kohdeyrityksen käyttämään laatupalkinto kriteeristöön. Tutkimusmenetelmänä prosessin nykytilan selvittämiseksi käytettiin teemahaastattelutta. Prosessin nykytilan ja sille asetettujen vaatimusten selvittämiseksi haastateltiin IT prosessin asiakkaita. Prosessianalyysi, tärkeimpien ala-prosessien tunnistaminen ja parannusalueiden löytäminen ovat tämän tutkielman keskeisemmät tulokset. Tutkielma painottui IT prosessin heikkouksien ja parannuskohteiden etsimiseen jatkuvan kehittämisen pohjaksi, ei niinkään prosessin radikaaliin uudistamiseen. Tutkielmassa esitellään TQM:n periaatteet, laatutyökaluja sekä prosessijohtamisen terminologia, periaatteet ja sen systemaattinen toteutus. Työ antaa myös kuvan siitä, miten TQM ja prosessijohtaminen niveltyvät yrityksen laatutyössä.

Classification and inventory management of abnormal demand items

The main objective of the study is to form a framework that provides tools to recognise and classify items whose demand is not smooth but varies highly on size and/or frequency. The framework will then be combined with two other classification methods in order to form a three-dimensional classification model. Forecasting and inventory control of these abnormal demand items is difficult. Therefore another object of this study is to find out which statistical forecasting method is most suitable for forecasting of abnormal demand items. The accuracy of different methods is measured by comparing the forecast to the actual demand. Moreover, the study also aims at finding proper alternatives to the inventory control of abnormal demand items. The study is quantitative and the methodology is a case study. The research methods consist of theory, numerical data, current state analysis and testing of the framework in case company. The results of the study show that the framework makes it possible to recognise and classify the abnormal demand items. It is also noticed that the inventory performance of abnormal demand items differs significantly from the performance of smoothly demanded items. This makes the recognition of abnormal demand items very important.

State of Logistics and Operations Management in Finnish and Swedish Companies – Survey Research Findings

In this research we are examining what is the status of logistics and operations management in Finnish and Swedish companies. Empirical data is based on the web based questionnaire, which was completed in the end of 2007 and early 2008. Our examination consists of roughly 30 answers from largest manufacturing (highest representation in our sample), trade and logistics/distribution companies. Generally it could be argued that these companies operate in complex environment, where number of products, raw materials/components and suppliers is high. However, usually companies rely on small amount of suppliers per raw material/component (highest frequency is 2), and this was especially the case among Swedish companies, and among those companies, which favoured overseas sourcing. Sample consisted of companies which mostly are operating in an international environment, and are quite often multinationals. Our survey findings reveal that companies in general have taken logistics and information technology as part of their strategy process; utilization of performance measures as well as system implementations have followed the strategy decisions. In the transportation mode side we identify that road transports dominate all transport flow classes (inbound, internal and outbound), followed by sea and air. Surprisingly small amount of companies use railways, but in general we could argue that Swedish companies prefer this mode over Finnish counterparts. With respect of operations outsourcing, we found that more traditional areas of logistics outsourcing are driving factors in company's performance measurement priority. In contrary to previous research, our results indicate that the scope of outsourcing is not that wide in logistics/operations management area, and companies are not planning to outsource more in the near future. Some support is found for more international operations and increased outsourcing activity. From the increased time pressure of companies, we find evidence that local as well as overseas customers expect deliveries within days or weeks, but suppliers usually supply within weeks or months. So, basically this leads into considerable inventory holding. Interestingly local and overseas sourcing strategy does not have that great influence on lead time performance of these particular sourcing areas - local strategy is anyway considerably better in responding on market changes due to shorter supply lead times. In the end of our research work we have completed correlation analysis concerning items asked with Likert scale. Our analysis shows that seeing logistics more like a process rather than function, applying time based management, favouring partnerships and measuring logistics within different performance dimensions results on preferred features and performance found in logistics literature.

Screening for cardiovascular disease risk and subsequent management in low and middle income countries : challenges and opportunities

Background: Cardiovascular disease (CVD), mainly heart attack and stroke, is the leading cause of premature mortality in low and middle income countries (LMICs). Identifying and managing individuals at high risk of CVD is an important strategy to prevent and control CVD, in addition to multisectoral population-based interventions to reduce CVD risk factors in the entire population. Methods: We describe key public health considerations in identifying and managing individuals at high risk of CVD in LMICs. Results: A main objective of any strategy to identify individuals at high CVD risk is to maximize the number of CVD events averted while minimizing the numbers of individuals needing treatment. Scores estimating the total risk of CVD (e.g. ten-year risk of fatal and non-fatal CVD) are available for LMICs, and are based on the main CVD risk factors (history of CVD, age, sex, tobacco use, blood pressure, blood cholesterol and diabetes status). Opportunistic screening of CVD risk factors enables identification of persons with high CVD risk, but this strategy can be widely applied in low resource settings only if cost effective interventions are used (e.g. the WHO Package of Essential NCD interventions for primary health care in low resource settings package) and if treatment (generally for years) can be sustained, including continued availability of affordable medications and funding mechanisms that allow people to purchase medications without impoverishing them (e.g. universal access to health care). This also emphasises the need to re-orient health systems in LMICs towards chronic diseases management.

Capability matrix – Identifying and evaluating the key capabilities of purchasing and supply management

Organizations gain resources, skills and technologies to find out the ultimate mix of capabilities to be a winner in the competitive market. These are all important factors that need to be taken into account in organizations operating in today's business environment. So far, there are no significant studies on the organizational capabilities in the field of PSM. The literature review shows that the PSM capabilities need to be studied more comprehensively. This study attempts to reveal and fill this gap by providing the PSM capability matrix that identifies the key PSM capabilities approached from two angles: there are three primary PSM capabilities and nine subcapabilities and, moreover, the individual and organizational PSM capabilities are identified and evaluated. The former refers to the PSM capability matrix of this study which is based on the strategic and operative PSM capabilities that complement the economic ones, while the latter relates to the evaluation of the PSM capabilities, such as the buyer profiles of individual PSM capabilities and the PSMcapability map of the organizational ones. This is a constructive case study. The aim is to define what the purchasing and supply management capabilities are and how they can be evaluated. This study presents a PSM capability matrix to identify and evaluate the capabilities to define capability gaps by comparing the ideal level of PSM capabilities to the realized ones. The research questions are investigated with two case organizations. This study argues that PSM capabilities can be classified into three primary categories with nine sub-categories and, thus, a PSM capability matrix with four evaluation categories can be formed. The buyer profiles are moreover identified to reveal the PSM capability gap. The resource-based view (RBV) and dynamic capabilities view (DCV) are used to define the individual and organizational capabilities. The PSM literature is also used to define the capabilities. The key findings of this study are i) the PSM capability matrix to identify the PSM capabilities, ii) the evaluation of the capabilities to define PSM capability gaps and iii) the presentation of the buyer profiles to identify the individual PSM capabilities and to define the organizational PSM capabilities. Dynamic capabilities are also related to the PSM capability gap. If a gap is identified, the organization can renew their PSM capabilities and, thus, create mutual learning and increase their organizational capabilities. And only then, there is potential for dynamic capabilities. Based on this, the purchasing strategy, purchasing policy and procedures should be identified and implemented dynamically.

Prototype of a web-based participative decision support platform in natural hazards and risk management

This paper presents the current state and development of a prototype web-GIS (Geographic Information System) decision support platform intended for application in natural hazards and risk management, mainly for floods and landslides. This web platform uses open-source geospatial software and technologies, particularly the Boundless (formerly OpenGeo) framework and its client side software development kit (SDK). The main purpose of the platform is to assist the experts and stakeholders in the decision-making process for evaluation and selection of different risk management strategies through an interactive participation approach, integrating web-GIS interface with decision support tool based on a compromise programming approach. The access rights and functionality of the platform are varied depending on the roles and responsibilities of stakeholders in managing the risk. The application of the prototype platform is demonstrated based on an example case study site: Malborghetto Valbruna municipality of North-Eastern Italy where flash floods and landslides are frequent with major events having occurred in 2003. The preliminary feedback collected from the stakeholders in the region is discussed to understand the perspectives of stakeholders on the proposed prototype platform.

Updates in the perioperative and emergency management of non-vitamin K antagonist oral anticoagulants.

Perioperative management of patients treated with the non-vitamin K antagonist oral anticoagulants is an ongoing challenge. Due to the lack of good clinical studies involving adequate monitoring and reversal therapies, management requires knowledge and understanding of pharmacokinetics, renal function, drug interactions, and evaluation of the surgical bleeding risk. Consideration of the benefit of reversal of anticoagulation is important and, for some low risk bleeding procedures, it may be in the patient's interest to continue anticoagulation. In case of major intra-operative bleeding in patients likely to have therapeutic or supra-therapeutic levels of anticoagulation, specific reversal agents/antidotes would be of value but are currently lacking. As a consequence, a multimodal approach should be taken which includes the administration of 25 to 50 U/kg 4-factor prothrombin complex concentrates or 30 to 50 U/kg activated prothrombin complex concentrate (FEIBA®) in some life-threatening situations. Finally, further studies are needed to clarify the ideal therapeutic intervention.

A feasability study of the analysis of the economic outcomes of specialized nutrition in obesity and weight management in Switzerland

The increasing prevalence of obesity and its associated complications requires specialized care to improve outcomes and control health care costs. Obesity is associated with numerous serious and costly medical problems requiring specialized care in managing health. The economic burden of obesity includes increased inpatient and outpatient medical expenditures as well as employer-related issues of absenteeism and associate costs. The objectives of this study are: - To describe the health consequences and the economic burden of obesity, - To review the existing treatment - To argue in favor of a specialized nutritional intervention that has shown to improve health and reduce obesity related health care costs. Therefore, expose the possibility of introducing the specialized nutrition in Switzerland and the feasibility of this project considering the medical trends and reimbursement system in Switzerland The benefits and outcomes for the patients will be the significant weight loss which reduces the severity and risk factors for complications and the improved health and quality of life. Weight loss will be a combination of a diet, exercise and behavioral interventions which are the basic recommendations for obesity treatment in addition to the specialized nutritional support. By nutritional support, we mean products that are intended to provide nutritional support in the dietary management of people with specific diseases and conditions when adequate intake of regular foods is compromised. These products are called, Food for special medical purposes FSMP. They are not intended to treat, cure, prevent, mitigate or have a direct impact on disease in a manner similar to drugs or other medical treatments and should be used under medical supervision. They also provide a low cost alternative to surgery. From a health care system perspective, the specialized nutrition will drive its advantage by reducing the utilization of medical services for obesity associated complications like medication, physician's consultations and surgical interventions arriving to a cost effective care for the hospitals, the health care organizations and the third party payers which are the health insurances. [Author, p. 4]