Análise da cinética do VO2 no domínio severo do crawl em condição atada de nado

Pós-graduação em Desenvolvimento Humano e Tecnologias - IBRC

Capacidade de força dos membros superiores em competidores de montaria em touros

This study did evaluate the handgrip strength capacity of bull riding practitioners and recreational practitioners in order to obtain parameters of the muscular fitness of subjects undertaken this sports practice. Twenty right-handed subjects were grouped into bull riding athletes (10 individuals at AMT: 174.5 ± 5.2 cm of height, 78.9 ± 12 kg of body weight, 24.7 ± 6.1 years, and 13,8 ± 2.4% for body fat) and non-athletes (10 subjects n-AMR: 178.5 ± 7.3 cm of height, 81.2 ± 8.8kg of body weight, 21.7 ± 2.3 years, and 13.8 ± 1.9% of body fat). They were underwent to protocols of handgrip strength evaluation by a standard and specific dynamometry (simulating a bull riding posture) of right (DPD e DED) e left (DEP e DEE) hands. The dynamic force values from one repetition to maximum test (1RM) were either obtained in conventional load-based system for upper limbs exercises. The values were compared by the test-t for independent data, assuming ρ ≤ 0.05. The relationship between the values of strength from handgrip and dynamic exercises were drawn by Pearson correlation. The results of the AMT to DPD (43.8 ± 6.8kgf), DPE (39.4 ± 7.7kgf), DED (44.9 ± 5.6kgf), and DEE (39.8 ± 8.3kgf). For the n-AMT in DPD (47.0 ± 3.0kgf), DPE (42.2 ± 6.1kgf), DED (49.2 ± 1.5kgf), and DEE (46.2 ± 4.1kgf). Significant difference was observed between DED and DEE. The strength tests of 1RM at bench press (73.2 ± 12.0kg and 82.0 ± 12.0kg), arm-curl (45.2 ± 8.9kg and 43.8 ± 8.9kg), triceps pulley (67.0 ± 6.3kg and 72.0 ± 6.3kg), and pulley (73.5 ± 8.5kg and 73.7 ± 7.5kg) for groups n-AMT and AMT did not showed differences. Correlations were showed between all handgrip tests and elbow flexor force for AMT, and between DPD and elbow extensor, abductor, adductor and extensor of shoulder for n-AMT. influences to the performance of the force dynamometry. It could be concluded that handgrip force and dynamic strength of upper limbs did not were putative responses for bull riding practice.

Perfil antropométrico e força de membros superiores em competidores de montaria em touros

A força de preensão manual tem sido relatada como determinante no desempenho de empunhadura em modalidades como lutas e escalada. Este estudo teve por propósito avaliar a aptidão de força isotônica máxima e de preensão manual em praticantes e não praticantes de montaria em touros, a fim de obter parâmetros de referência desta população. Foram avaliados 20 sujeitos em dois grupos, sendo 10 classificados como atletas de montaria e 10 não-atletas. A avaliação da força de preensão manual foi realizada em dinamômetro em posição convencional (DP) e específica (DE), com ambas as mãos (D e E). A força isotônica máxima foi determinada pelo teste de uma repetição máxima (1RM) e também foram obtidas medidas de circunferência dos segmentos, bem como a composição corporal por protocolo de dobras cutâneas. Os valores das variáveis foram comparados pelo teste-t (ρ ≤ 0,05) para dados independentes. As relações entre os valores de força e características antropométricas foram traçadas pelo coeficiente de Pearson. Os resultados para AMT em DPD (43.8±6.8 kgf), DPE (39.4±7.7 kgf), DED (44.9±5.6 kgf) e DEE (39.8±8.3 kgf) comparados aos apresentados por n-AMT em DPD (47.0±3.0 kgf), DPE (42.2±6.1 kgf), DED (49.2±1.5 kgf) e DEE (46.2±4.1 kgf) apresentaram diferenças apenas para DED e DEE. A força nos testes de 1RM (supino reto: 73.2±12.0 kg e 82.0±12.0 kg; rosca direta: 45.2±8.9 kg e 43.8±8.9 kg; tríceps pulley: 67.0±6.3 kg e 72.0±6.3 kg; e puxada posterior: 73.5±8.5 kg e 73.7±7.5 kg) não mostram diferenças entre os grupos. A influência sobre a dinamometria apresenta-se diferente entre os grupos, sendo relevante a força de flexão do cotovelo em AMT e a antropometria e força isotônica para n-AMT. Conclui-se que as características morfo-funcionais de membros superiores não demandam especificidade à montaria em touros.

Anthropometric profile and upper-limbs strength of bull rider s competitors

A força de preensão manual tem sido relatada como determinante no desempenho de empunhadura em modalidades como lutas e escalada. Este estudo teve por propósito avaliar a aptidão de força isotônica máxima e de preensão manual em praticantes e não praticantes de montaria em touros, a fim de obter parâmetros de referência desta população. Foram avaliados 20 sujeitos em dois grupos, sendo 10 classificados como atletas de montaria e 10 não-atletas. A avaliação da força de preensão manual foi realizada em dinamômetro em posição convencional (DP) e específica (DE), com ambas as mãos (D e E). A força isotônica máxima foi determinada pelo teste de uma repetição máxima (1RM) e também foram obtidas medidas de circunferência dos segmentos, bem como a composição corporal por protocolo de dobras cutâneas. Os valores das variáveis foram comparados pelo teste-t (ρ ≤ 0,05) para dados independentes. As relações entre os valores de força e características antropométricas foram traçadas pelo coeficiente de Pearson. Os resultados para AMT em DPD (43.8±6.8 kgf), DPE (39.4±7.7 kgf), DED (44.9±5.6 kgf) e DEE (39.8±8.3 kgf) comparados aos apresentados por n-AMT em DPD (47.0±3.0 kgf), DPE (42.2±6.1 kgf), DED (49.2±1.5 kgf) e DEE (46.2±4.1 kgf) apresentaram diferenças apenas para DED e DEE. A força nos testes de 1RM (supino reto: 73.2±12.0 kg e 82.0±12.0 kg; rosca direta: 45.2±8.9 kg e 43.8±8.9 kg; tríceps pulley: 67.0±6.3 kg e 72.0±6.3 kg; e puxada posterior: 73.5±8.5 kg e 73.7±7.5 kg) não mostram diferenças entre os grupos. A influência sobre a dinamometria apresenta-se diferente entre os grupos, sendo relevante a força de flexão do cotovelo em AMT e a antropometria e força isotônica para n-AMT. Conclui-se que as características morfo-funcionais de membros superiores não demandam especificidade à montaria em touros.

An ice machine adapted into an autonomous photovoltaic system without batteries using a variable-speed drive

The adaptation of a commercially available ice machine for autonomous photovoltaic operation without batteries is presented. In this adaptation a 1040 W(p) photovoltaic array directly feeds a variable-speed drive and a 24 V(dc) source. The drive runs an induction motor coupled by belt-and-pulley to an open reciprocating compressor, while the dc source supplies a solenoid valve and the control electronics. Motor speed and refrigerant evaporation pressure are set aiming at continuously matching system power demand to photovoltaic power availability. The resulting system is a simple integration of robust, standard, readily available parts. It produces 27 kg of ice in a clear-sky day and has ice production costs around US$0.30/kg. Although a few machine features might be specific to Brazil, its technical and economical guidelines are applicable elsewhere. Copyright (C); 2010 John Wiley & Sons, Ltd.

Postural adjustment after an unexpected perturbation in children with haemophilia

. Children with haemophilia often bleed inside joints and muscles, which may impair postural adjustments. These postural adjustments are necessary to control postural balance during daily activities. The inability to quickly recover postural balance could elevate the risk of bleeding. To determine whether children with haemophilia have impaired postural adjustment after an unexpected perturbation compared with healthy children. Twenty children with haemophilia comprised the haemophilic group (HG), and 20 healthy, age-paired children comprised the control group (CG). Subjects stood on a force plate, and 4% of the subjects body weight was applied via a pulley system to a belt around the subjects trunks. The centre of pressure (COP) displacement was measured after the weight was unexpectedly released to produce a controlled postural perturbation followed by postural adjustment to recover balance. The subjects postural adjustments in eight subsequent intervals of 1 s (t1t8), beginning with the moment of weight removal, were compared among intervals and between groups. The applied perturbation magnitudes were the same for both groups, and no difference was observed between the groups in t1. However, the COP displacement in t2 in the HG was significantly higher than in the CG. No differences were observed between the groups in the other intervals. Within-group analysis showed that the COP was higher in t2 than in t4 (P = 0.016), t5 (P = 0.001) and t8 (P = 0.050) in the HG. No differences were observed among intervals in the CG. Children with haemophilia demonstrated differences in postural adjustment while undergoing unexpected balance perturbations when compared with healthily children.

An examination chair to measure internal rotation of the hip in routine settings: a validation study

OBJECTIVE: To determine the performance of a newly developed examination chair as compared with the clinical standard of assessing internal rotation (IR) of the flexed hip with a goniometer. METHODS: The examination chair allowed measurement of IR in a sitting position simultaneously in both hips, with hips and knees flexed 90 degrees, lower legs hanging unsupported and a standardized load of 5 kg applied to both ankles using a bilateral pulley system. Clinical assessment of IR was performed in supine position with hips and knees flexed 90 degrees using a goniometer. Within the framework of a population-based inception cohort study, we calculated inter-observer agreement in two samples of 84 and 64 consecutive, unselected young asymptomatic males using intra-class correlation coefficients (ICC) and determined the correlation between IR assessed with examination chair and clinical assessment. RESULTS: Inter-observer agreement was excellent for the examination chair (ICC right hip, 0.92, 95% confidence interval [CI] 0.89-0.95; ICC left hip, 0.90, 95% CI 0.86-0.94), and considerably higher than that seen with clinical assessment (ICC right hip, 0.65, 95% CI 0.49-0.77; ICC left hip, 0.69, 95% CI 0.54-0.80, P for difference in ICC between examination chair and clinical assessment

Topologieoptimierung von Seilscheiben

Die Topologieoptimierung hat sich in den letzten Jahren zu einer sehr praktischen und vielseitig ein-setzbaren Design- und Entwicklungsmethode entwickelt. Diese Methode soll nun an einer Seilscheibe, die aus der Industrie nicht mehr wegzudenken ist, angewendet werden. Im Vordergrund steht vor allem die Reduzierung der Masse sowie die Anpassung der Speichenform an die unterschiedlichen Randbedingungen.

Mechanisms of protein regulation in rat skeletal muscle during resistance exercise and training

The cellular mechanisms through which adult rat skeletal muscle protein is regulated during resistance exercise and training was investigated. A model of non-voluntary resistance exercise was described which involves the electrically-stimulated contraction of the lower leg muscles of anesthetized rats against a weighted pulley-bar. Muscle protein synthesis rates were measured by in vivo constant infusion of $\sp3$H-leucine following a single bout of resistance exercise. Specific messenger RNA levels were determined by dot-blot hybridization analysis using $\sp{32}$P-labelled DNA probes after a single bout and multiple bouts of phasic training. The effects of phasic training on increasing skeletal muscle mass was assessed. Between 12 and 36 hours following a single resistance exercise bout (24-192 contractions), total mixed and myofibril protein synthesis rates were significantly increase (32%-65%) after concentric (gastrocnemius m.) and eccentric (tibialis anterior m.) contractions. Eccentric contractions had greater effects on myofibril synthesis with more prolonged increases in synthesis rates. Lower numbers of eccentric than concentric contractions were required to increase synthesis. Cellular RNA was increased after exercise but the relative levels of skeletal $\alpha$-actin and cytochrome c mRNAs were unchanged. Since increases in synthesis rates exceeded increases in RNA, post-transcriptional mechanisms may be primarily responsible for increased protein synthesis after a resistance exercise bout. After 10-22 weeks of phasic eccentric resistance training, muscle enlargement (16%-30%) was produced in the tibialis anterior m. after all training paradigms examined. In contrast, gastrocnemius m. enlargement after phasic concentric training occurred after moderate (24/bout) but not after high (192/bout) repetition training. The absence of muscle growth in the gastrocnemius m. after high repetition training despite increased synthesis rates after the initial bout and RNA and possibly mRNA accumulation during training suggests a role for post-translational mechanisms (protein degradation) in the control of muscle growth in the gastrocnemius m. It is concluded that muscle protein during resistance exercise and training is regulated at several cellular levels. The particular response may be influenced by the exercise intensity and duration, the training frequency and the type of contractile work (eccentric vs. concentric) performed. ^

Validation of stress magnetic resonance imaging of the canine stifle joint with and without an intact cranial cruciate ligament.

OBJECTIVE To validate use of stress MRI for evaluation of stifle joints of dogs with an intact or deficient cranial cruciate ligament (CrCL). SAMPLE 10 cadaveric stifle joints from 10 dogs. PROCEDURES A custom-made limb-holding device and a pulley system linked to a paw plate were used to apply axial compression across the stifle joint and induce cranial tibial translation with the joint in various degrees of flexion. By use of sagittal proton density-weighted MRI, CrCL-intact and deficient stifle joints were evaluated under conditions of loading stress simulating the tibial compression test or the cranial drawer test. Medial and lateral femorotibial subluxation following CrCL transection measured under a simulated tibial compression test and a cranial drawer test were compared. RESULTS By use of tibial compression test MRI, the mean ± SD cranial tibial translations in the medial and lateral compartments were 9.6 ± 3.7 mm and 10 ± 4.1 mm, respectively. By use of cranial drawer test MRI, the mean ± SD cranial tibial translations in the medial and lateral compartments were 8.3 ± 3.3 mm and 9.5 ± 3.5 mm, respectively. No significant difference in femorotibial subluxation was found between stress MRI techniques. Femorotibial subluxation elicited by use of the cranial drawer test was greater in the lateral than in the medial compartment. CONCLUSIONS AND CLINICAL RELEVANCE Both stress techniques induced stifle joint subluxation following CrCL transection that was measurable by use of MRI, suggesting that both methods may be further evaluated for clinical use.

Inclination-dependent changes of the critical shoulder angle significantly influence superior glenohumeral joint stability.

BACKGROUND The critical shoulder angle combines the acromion index and glenoid inclination and has potential to discriminate between shoulders at risk for rotator cuff tear or osteoarthritis and those that are asymptomatic. However, its biomechanics, and particularly the role of the glenoid inclination, are not yet fully understood. METHODS A shoulder simulator was used to analyze the independent influence of glenoid inclination during abduction from 0 to 60°. Spindle motors transferred tension forces by a cable-pulley on human cadaveric humeri. A six-degree-of-freedom force transducer was mounted directly behind the polyethylene glenoid to measure shear and compressive joint reaction force and calculate the instability ratio (ratio of shear and compressive joint reaction force) with the different force ratios of the deltoid and supraspinatus muscles (2:1 and 1:1). A stepwise change in the inclination by 5° increments allowed simulation of a critical shoulder angle range of 20° to 45°. FINDINGS Tilting the glenoid to cranial (increasing the critical shoulder angle) increases the shear joint reaction force and therefore the instability ratio. A balanced force ratio (1:1) between the deltoid and the supraspinatus allowed larger critical shoulder angles before cranial subluxation occurred than did the deltoid-dominant ratio (2:1). INTERPRETATION Glenoid inclination-dependent changes of the critical shoulder angle have a significant impact on superior glenohumeral joint stability. The increased compensatory activity of the rotator cuff to keep the humeral head centered may lead to mechanical overload and could explain the clinically observed association between large angles and degenerative rotator cuff tears.

The Summary of a Course of Experimental Philosophical Lectures, 1746-1747

Leather hardcover notebook containing a handwritten copy of John Winthrop's course of experimental and philosophical lectures presented between March 10, 1746 and June 16, 1746. The first one-hundred pages of the volume are divided into twenty chapters which were presented in thirty-three lectures. The chapters contain text and diagrams on mechanical powers, the lever, the pulley, the axis in peritrochio, the inclined plane, the wedge, the screw, compound engines, the laws of motion, gravity, attraction of cohesion, the power of repulsion, magnetism, fluids, electricity, opticks, and astronomy. There is a five-page addenda to the course summary added in 1747, and a sixty-page text titled "The Method of Astronomical calculations" containing thirteen problems related to calculating distances with a list of astronomical characters, and followed with charts related to the eclipse of Jupiter's satellites.