Generic classification for the Gasteruptiinae (Hymenoptera: Gasteruptiidae) based on a cladistic analysis, with the description of two new Neotropical genera and the revalidation of Plutofoenus Kieffer

Gasteruptiinae is the largest Gasteruptiidae subfamily, with circa 400 species that have been grouped into the worldwide Gasteruption Latreille. Based on a cladistic analysis with 43 morphological characters, 40 ingroup taxa representing all biogeographic regions, and seven outgroups (four Hyptiogastrinae, two Aulacidae and one Evaniidae), I confirm the monophyly of Gasteruptiinae and Gasteruption and recognize three exclusively Neotropical small genera: Plutofoenus Kieffer (revalidated) (southern South America), Spinolafoenus Macedo n. gen. (Chile) and Trilobitofoenus Macedo n. gen. (Central and South America). Gasteruption, supported by four synapomorphies, remains the most speciose genus in the subfamily. The four Gasteruptiinae genera are keyed and described. Seven species are keyed and described or redescribed: Plutofoenus chaeturus (Schletterer) n. comb., P. edwardsi Turner, P. paraguayensis (Schrottky), Spinolafoenus ruficornis (Spinola) n. comb., Trilobitofoenus alvarengai Macedo n. sp., T. plaumanni Macedo n. sp. and T. sericeus (Cameron) n. comb. (lectotype designated).

The JK three-product cyclone - performance and potential applications

In spite of their wide application in comminution circuits, hydrocyclones have at least one significant disadvantage in that their operation inherently tends to return the fine denser liberated minerals to the grinding mill. This results in unnecessary overgrinding which adds to the milling cost and can adversely affect the efficiency of downstream processes. In an attempt to solve this problem, a three-product cyclone has been developed at the Julius Kruttschnitt Mineral Research Centre (JKMRC) to generate a second overflow in which the fine dense liberated minerals can be selectively concentrated for further treatment. In this paper, the design and operation of the three-product cyclone are described. The influence of the length of the second vortex finder on the performance of a 150-mm unit treating a mixture of magnetite and silica is investigated. Conventional cyclone tests were also conducted under similar conditions. Using the operational performance data of the three-product and conventional cyclones, it is shown that by optimising the length of the second vortex finder, the amount of fine dense mineral particles that reports to the three-product cyclone underflow can be reduced. In addition, the three-product cyclone can be used to generate middlings stream that may be more suitable for flash flotation than the conventional cyclone underflow, or alternatively, could be classified with a microscreen to separate the valuables from the gangue. At the same time, a fines stream having similar properties to those of the conventional overflow can be obtained. Hence, if the middlings stream was used as feed for flash flotation or microscreening, the fines stream could be used in lieu of the conventional overflow without compromising the feed requirements for the conventional flotation circuit. Some of the other potential applications of the new cyclone are described. (C) 2003 Elsevier Science B.V. All rights reserved.

Product differentiation, competitive pressure and the effects of innovation on the success and survivability of firms in oligopoly markets

In a recent paper Tishler and Milstein (2009) fi…nd that increased competition may increase aggregate R&D spending while market output decreases. Therefore, they obtain the surprising result that R&D spending is excessive when competition becomes intense. Their result is based on the standard linear demand function for differentiated products introduced by Bowley (1924) where decreased product differentiation is interpreted as more competitive pressure. In this paper I show that at an aggregate level this interpretation is problematic because equilibrium effects are dominated by a demand reduction effect. A slight modifi…cation of the standard demand function eliminates this effect. For the Tishler and Milstein (2009) setting it is shown that then increased competition increases both R&D spending and aggregate market output. Therefore, at least for consumers, more intense competition increases welfare. Journal of Economic Literature Classi…fication Numbers: D43, L1, O3. Keywords: Oligopoly markets, Product differentiation, Competitive pressure.

Generalized Schmidt decomposition and classification of three-quantum-bit states

We prove for any pure three-quantum-bit state the existence of local bases which allow one to build a set of five orthogonal product states in terms of which the state can be written in a unique form. This leads to a canonical form which generalizes the two-quantum-bit Schmidt decomposition. It is uniquely characterized by the five entanglement parameters. It leads to a complete classification of the three-quantum-bit states. It shows that the right outcome of an adequate local measurement always erases all entanglement between the other two parties.

Procurement and inventory management in product ramp down

Tuotteiden elinkaaret elektroniikkateollisuudessa ovat lyhentyneet entisestään. Paineet uusien kehittyneempien tuotteiden lanseeraamiselle ovat kasvaneet. Huonosti hoidettu tuotevaihto voi aiheuttaa merkittäviä kustannuksia yritykselle mikäli alasajon kustannusvaikutusta tulokseen aliarvioidaan. Työ käsittelee markkinoilta poistuvan tuotteen materiaalivirtojen hallintaa tuotevaihdon aikana. Lähtökohtana työssä oli kehittää toimintatapa miten tuotteen alasajon aikana tulisi toimia sekä mallintaa hankintaketju riskien ja pullonkaulojen löytämiseksi. Päätavoitteena oli materiaalivaraston arvon minimoiminen sekä ylijäämämateriaalien hyödyntäminen. Työn merkittävimpiä tuloksia oli hankintaketjun materiaalivirtojen seurantaan kehitetty Excel työkalu sekä alasajon liittyvien työvaiheiden kuvaaminen.

Purchasing portfolio analysis and supplier classification

The purpose of the thesis is to classify suppliers and to enhance strategic purchasing in the case company. Supplier classification is conducted to fulfill the requirements of the company quality manual and international quality standards. To gain more benefit, a strategic purchasing tool, Kraljic’s purchasing portfolio and analytical hierarchy process are utilized for the base of supplier classification. Purchasing portfolio is used to give quick and easy visual insight on product group management form the viewpoint of purchasing. From the base on purchasing portfolio alternative purchasing and supplier strategies can be formed that enhance the strategic orientation of purchasing. Thus purchasing portfolio forces the company to orient on proactive and strategic purchasing. As a result a survey method for implementing purchasing portfolio in the company is developed that exploits analytical hierarchy process. Experts from the company appoint the categorization criteria and in addition, participate in the survey to categorize product groups on the portfolio. Alternative purchasing strategies are formed. Suppliers are classified depending on the importance and characteristics of the product groups supplied.

PDM system functions and utilizations analysis to improve efficiency of sheet metal product design and manufacturing

This study will concentrate on Product Data Management (PDM) systems, and sheet metal design features and classification. In this thesis, PDM is seen as an individual system which handles all product-related data and information. The meaning of relevant data is to take the manufacturing process further with fewer errors. The features of sheet metals are giving more information and value to the designed models. The possibility of implementing PDM and sheet metal features recognition are the core of this study. Their integration should make the design process faster and manufacturing-friendly products easier to design. The triangulation method is the basis for this research. The sections of this triangle are: scientific literature review, interview using the Delphi method and the author’s experience and observations. The main key findings of this study are: (1) the area of focus in triangle (the triangle of three different point of views: business, information exchange and technical) depends on the person’s background and their role in the company, (2) the classification in the PDM system (and also in the CAD system) should be done using the materials, tools and machines that are in use in the company and (3) the design process has to be more effective because of the increase of industrial production, sheet metal blank production and the designer’s time spent on actual design and (4) because Design For Manufacture (DFM) integration can be done with CAD-programs, DFM integration with the PDM system should also be possible.

Classification of the virtually cyclic subgroups of the pure braid groups of the projective plane

We classify the ( finite and infinite) virtually cyclic subgroups of the pure braid groups P(n)(RP(2)) of the projective plane. The maximal finite subgroups of P(n)(RP(2)) are isomorphic to the quaternion group of order 8 if n = 3, and to Z(4) if n >= 4. Further, for all n >= 3, the following groups are, up to isomorphism, the infinite virtually cyclic subgroups of P(n)(RP(2)): Z, Z(2) x Z and the amalgamated product Z(4)*(Z2)Z(4).

Comparison for three Classification Techniques

In this paper we show the results of a comparison simulation study for three classification techniques: Multinomial Logistic Regression (MLR), No Metric Discriminant Analysis (NDA) and Linear Discriminant Analysis (LDA). The measure used to compare the performance of the three techniques was the Error Classification Rate (ECR). We found that MLR and LDA techniques have similar performance and that they are better than DNA when the population multivariate distribution is Normal or Logit-Normal. For the case of log-normal and Sinh(-1)-normal multivariate distributions we found that MLR had the better performance.

Self-Organizing Maps as a New Tool for Classification of Plants at Lower Hierarchical Levels

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Local classification of singular hexagonal 3-webs with holomorphic Chern connection form and infinitesimal symmetries

Implicit ODE, cubic in derivative, generically has no infinitesimal symmetries even at regular points with distinct roots. Cartan showed that at regular points, ODEs with hexagonal 3-web of solutions have symmetry algebras of the maximal possible dimension 3. At singular points such a web can lose all its symmetries. In this paper we study hexagonal 3-webs having at least one infinitesimal symmetry at singular points. In particular, we establish sufficient conditions for the existence of non-trivial symmetries and show that under natural assumptions such a symmetry is semi-simple, i.e. is a scaling in some coordinates. Using the obtained results, we provide a complete classification of hexagonal singular 3-web germs in the complex plane, satisfying the following two conditions: 1) the Chern connection form is holomorphic at the singular point, 2) the web admits at least one infinitesimal symmetry at this point. As a by-product, a classification of hexagonal weighted homogeneous 3-webs is obtained.

Classification of suppressor additives based on synergistic and antagonistic ensemble effects

Three fundamental types of suppressor additives for copper electroplating could be identified by means of potential Transient measurements. These suppressor additives differ in their synergistic and antagonistic interplay with anions that are chemisorbed on the metallic copper surface during electrodeposition. In addition these suppressor chemistries reveal different barrier properties with respect to cupric ions and plating additives (Cl, SPS). While the type-I suppressor selectively forms efficient barriers for copper inter-diffusion on chloride-terminated electrode surfaces we identified a type-II suppressor that interacts non-selectively with any kind of anions chemisorbed on copper (chloride, sulfate, sulfonate). Type-I suppressors are vital for the superconformal copper growth mode in Damascene processing and show an antagonistic interaction with SPS (Bis-Sodium-Sulfopropyl-Disulfide) which involves the deactivation of this suppressor chemistry. This suppressor deactivation is rationalized in terms of compositional changes in the layer of the chemisorbed anions due to the competition of chloride and MPS (Mercaptopropane Sulfonic Acid) for adsorption sites on the metallic copper surface. MPS is the product of the dissociative SPS adsorption within the preexisting chloride matrix on the copper surface. The non-selectivity in the adsorption behavior of the type-II suppressor is rationalized in terms of anion/cation pairing effects of the poly-cationic suppressor and the anion-modified copper substrate. Atomic-scale insights into the competitive Cl/MPS adsorption are gained from in situ STM (Scanning Tunneling Microscopy) using single crystalline copper surfaces as model substrates. Type-III suppressors are a third class of suppressors. In case of type-land type-II suppressor chemistries the resulting steady-state deposition conditions are completely independent on the particular succession of additive adsorption. In contrast to that a strong dependence of the suppressing capabilities on the sequence of additive adsorption ("first comes, first serves" principle) is observed for the type-IIIsuppressor. This behavior:is explained by a suppressor barrier that impedes not only the copper inter-diffusion but also the transport of other additives (e.g. SPS) to the copper surface. (C) 2011 Elsevier Ltd. All rights reserved.

A new universal, standardized implant database for product identification: a unique tool for arthroplasty registries.

INTRODUCTION Every joint registry aims to improve patient care by identifying implants that have an inferior performance. For this reason, each registry records the implant name that has been used in the individual patient. In most registries, a paper-based approach has been utilized for this purpose. However, in addition to being time-consuming, this approach does not account for the fact that failure patterns are not necessarily implant specific but can be associated with design features that are used in a number of implants. Therefore, we aimed to develop and evaluate an implant product library that allows both time saving barcode scanning on site in the hospital for the registration of the implant components and a detailed description of implant specifications. MATERIALS AND METHODS A task force consisting of representatives of the German Arthroplasty Registry, industry, and computer specialists agreed on a solution that allows barcode scanning of implant components and that also uses a detailed standardized classification describing arthroplasty components. The manufacturers classified all their components that are sold in Germany according to this classification. The implant database was analyzed regarding the completeness of components by algorithms and real-time data. RESULTS The implant library could be set up successfully. At this point, the implant database includes more than 38,000 items, of which all were classified by the manufacturers according to the predefined scheme. Using patient data from the German Arthroplasty Registry, several errors in the database were detected, all of which were corrected by the respective implant manufacturers. CONCLUSIONS The implant library that was developed for the German Arthroplasty Registry allows not only on-site barcode scanning for the registration of the implant components but also its classification tree allows a sophisticated analysis regarding implant characteristics, regardless of brand or manufacturer. The database is maintained by the implant manufacturers, thereby allowing registries to focus their resources on other areas of research. The database might represent a possible global model, which might encourage harmonization between joint replacement registries enabling comparisons between joint replacement registries.

A fractional vegetation cover remote sensing product on pan-arctic scale with link to geotiff image

The paper presents first results of a pan-boreal scale land cover harmonization and classification. A methodology is presented that combines global and regional vegetation datasets to extract percentage cover information for different vegetation physiognomy and barren for the pan-arctic region within the ESA Data User Element Permafrost. Based on the legend description of each land cover product the datasets are harmonized into four LCCS (Land Cover Classification System) classifiers which are linked to the MODIS Vegetation Continuous Field (VCF) product. Harmonized land cover and Vegetation Continuous Fields products are combined to derive a best estimate of percentage cover information for trees, shrubs, herbaceous and barren areas for Russia. Future work will concentrate on the expansion of the developed methodology to the pan-arctic scale. Since the vegetation builds an isolation layer, which protects the permafrost from heat and cold temperatures, a degradation of this layer due to fire strongly influences the frozen conditions in the soil. Fire is an important disturbance factor which affects vast processes and dynamics in ecosystems (e.g. biomass, biodiversity, hydrology, etc.). Especially in North Eurasia the fire occupancy has dramatically increased in the last 50 years and has doubled in the 1990s with respect to the last five decades. A comparison of global and regional fire products has shown discrepancies between the amounts of burn scars detected by different algorithms and satellite data.