989 resultados para lacustrine sediments
Resumo:
ntegrated terrestrial and marine records of northeast African vegetation are needed to provide long high resolution records of environmental variability with established links to specific terrestrial environments. In this study, we compare records of terrestrial vegetation preserved in marine sediments in the Gulf of Aden [Deep Sea Drilling Project (DSDP) Site 231] and an outcrop of lacustrine sediments in the Turkana Basin, Kenya, part of the East African Rift System. We analyzed higher plant biomarkers in sediments from both deposits of known equivalent age, corresponding to a ca. 50-100 ka humid interval prior to the b-Tulu Bor eruption ca. 3.40 Ma, when the Lokochot Lake occupied part of the Turkana Basin. Molecular abundance distributions indicate that long chain n-alkanoic acids in marine sediments are the most reliable proxy for terrestrial vegetation (Carbon Preference Index, CPI = 4.5), with more cautious interpretation needed for n-alkanes and lacustrine archives. Marine sediments record carbon isotopic variability in terrestrial biomarkers of 2-3 per mil, roughly equivalent to 20% variability in the C3/C4 vegetation contribution. The proportion of C4 vegetation apparently increased at times of low terrigenous dust input. Terrestrial sediments reveal much larger (2-10 per mil) shifts in n-alkanoic acid delta13C values. However, molecular abundance and isotopic composition suggest that microbial sources may also contribute fatty acids, contaminating the lacustrine sedimentary record of terrestrial vegetation.
Resumo:
Lipids, humic acids, and kerogens were isolated from Site 582 sediment cores. The amount of each organic fraction in the samples taken from 5.6 to 694 m sub-bottom is almost unrelated to depth of the sample. A study of the oxidation of organic matter by the alkaline KMnO4 method reveals that distribution of polymethylene chain lengths of the kerogens and humic acids in the marine sediments differ from those in lacustrine sediments. The order of abundance of these chains in the sediments is: kerogens, 52-66% of total methylene chains; humic acids, 25-33%; and lipids, 8-16%. The results suggest that polyunsaturated fatty acids (>=4 double bonds) may be important in the formation of polymethylene chains of kerogens and humic acids in marine sediments.
Resumo:
A simple, reliable, and efficient method has been elaborated for direct determination of isotopic composition of authigenic uranium in siliceous lacustrine sediments. The method is based on studying kinetics of selective extraction of authigenic uranium from sediments by weak solutions of ammonium hydrocarbonate followed by ICP-MS analysis of nuclides. To estimate contamination of authigenic uranium by terrigenous one contents of 232Th and some other clastogenic elements in the extracts were measured simultaneously. Selectivity of extraction of authigenic uranium from the sediments treated with 1% NH4HCO3 solution appeared to be no worse than 99%. The method was applied to analysis of isotopic composition of authigenic uranium at several key horizons of the earlier dated core from the Baikal Lake. Measurements directly show that 234U/238U values in Baikal water varied depending on climate, which contradicts existing hypotheses. Measured 234U/238U ratios in water of the paleo-Baikal match corresponding values reconstructed from isotopic data for total uranium in the sediments on supposition that U/Th ratio is constant in terrigenous fraction of the sediments. Direct experimental determination of total and authigenic nuclides in sediments enhances potentiality of the method for 234U-230Th dating of non-carbonate lacustrine sediments including those from the Baikal Lake within intervals corresponding to periods of glaciation, when sediments were rich in terrigenous components. Portions of terrigenous and authigenic uranium are well separated and we can study variability of sources of terrigenous matter and refine the earlier model for reconstructing climate humidity in the East Siberia.
Resumo:
This study examines the forcing mechanisms driving long-term carbonate accumulation and preservation in lacustrine sediments in Lake Iznik (northwestern Turkey) since the last glacial. Currently, carbonates precipitate during summer from the alkaline water column, and the sediments preserve aragonite and calcite. Based on X-ray diffraction data, carbonate accumulation has changed significantly and striking reversals in the abundance of the two carbonate polymorphs have occurred on a decadal time scale, during the last 31 ka cal BP. Different lines of evidence, such as grain size, organic matter and redox sensitive elements, indicate that reversals in carbonate polymorph abundance arise due to physical changes in the lacustrine setting, for example, water column depth and lake mixing. The aragonite concentrations are remarkably sensitive to climate, and exhibit millennial-scale oscillations. Extending observations from modern lakes, the Iznik record shows that the aerobic decomposition of organic matter and sulphate reduction are also substantial factors in carbonate preservation over long time periods. Lower lake levels favour aragonite precipitation from supersaturated waters. Prolonged periods of stratification and consequently enhanced sulphate reduction favour aragonite preservation. In contrast, prolonged or repeated exposure of the sediment-water interface to oxygen results in in situ aerobic organic matter decomposition, eventually leading to carbonate dissolution. Notably, the Iznik sediment profile raises the hypothesis that different states of lacustrine mixing lead to selective preservation of different carbonate polymorphs. Thus, a change in the entire lake water chemistry is not strictly necessary to favour the preservation of one polymorph over another.
Resumo:
This synthesis dataset contains records of freshwater peat and lake sediments from continental shelves and coastal areas. Information included is site location (when available), thickness and description of terrestrial sediments as well as underlying and overlying sediments, dates (when available), and references.
Resumo:
We have characterized anapaite Ca2Fe2+(PO4)2·4(H2O), a rare Ca and Fe phosphate, using a combination of electron microscopy and vibrational spectroscopy. The mineral occurs in soils and lacustrine sediments and is usually related to the diagenetic process in phosphorous rich sediments. The phosphate anion is characterized by its Raman spectrum with an intense sharp band at 943 cm-1, attributed to the ν1 PO4 3- symmetric stretching mode. Three bands at 992, 1039 and 1071 cm-1 are attributed to ν3 PO4 3-antisymmetric stretching modes. The infrared spectrum of anapaite shows complexity with a series of overlapping bands. Water in the structure of anapaite is observed by OH stretching vibrations at 2777, 3022 and 3176 cm-1 (Raman) and 2744, 3014 and 3096 cm-1 (infrared). The position of these bands provides evidence for the strong hydrogen bonding of water in the anapaite structure and contributes to the stability of the mineral.
Resumo:
Colemanite CaB3O4(OH)3 H2O is a secondary borate mineral formed from borax and ulexite in evaporate deposits of alkaline lacustrine sediments. The basic structure of colemanite contains endless chains of interlocking BO2(OH) triangles and BO3(OH) tetrahedrons with the calcium, water and extra hydroxide units interspersed between these chains. The Raman spectra of colemanite is characterized by an intense band at 3605 cm-1 assigned to the stretching vibration of OH units and a series of bands at 3182, 3300, 3389 and 3534 cm-1 assigned to water stretching vibrations. Infrared bands are observed in similar positions. The BO stretching vibrations of the trigonal and tetrahedral boron are characterized by Raman bands at 876, 1065 and 1084 cm-1. The OBO bending mode is defined by the Raman band at 611 cm-1. It is important to characterize the very wide range of borate minerals including colemanite because of the very wide range of applications of boron containing minerals.
Resumo:
Terminal restriction fragment length polymorphism (T-RFLP) analysis is a polymerase chain reaction (PCR)-fingerprinting method that is commonly used for comparative microbial community analysis. The method can be used to analyze communities of bacteria, archaea, fungi, other phylogenetic groups or subgroups, as well as functional genes. The method is rapid, highly reproducible, and often yields a higher number of operational taxonomic units than other, commonly used PCR-fingerprinting methods. Sizing of terminal restriction fragments (T-RFs) can now be done using capillary sequencing technology allowing samples contained in 96- or 384-well plates to be sized in an overnight run. Many multivariate statistical approaches have been used to interpret and compare T-RFLP fingerprints derived from different communities. Detrended correspondence analysis and the additive main effects with multiplicative interaction model are particularly useful for revealing trends in T-RFLP data. Due to biases inherent in the method, linking the size of T-RFs derived from complex communities to existing sequence databases to infer their taxonomic position is not very robust. This approach has been used successfully, however, to identify and follow the dynamics of members within very simple or model communities. The T-RFLP approach has been used successfully to analyze the composition of microbial communities in soil, water, marine, and lacustrine sediments, biofilms, feces, in and on plant tissues, and in the digestive tracts of insects and mammals. The T-RFLP method is a user-friendly molecular approach to microbial community analysis that is adding significant information to studies of microbial populations in many environments.
Resumo:
By using high-resolution laser grain size instrument Mastersizer 2000, the grain size distribution of windblown depositions (loess and sandy dunes), aqueous sediments (lake, river, riverside and foreshore sand), weathering crust, sloping materials and other fine-grain sediments are systemically measured. The multimodal characteristics of grain size distribution of these sediments are carefully studied. The standard patterns and their grain size characteristics of various sediments are systemically summarized. The discrepancies of multimodal distribution among windblown depositions, aqueous sediments and other sediments are concluded and the physical mechanisms of grain size multimodal distribution of various sediments are also discussed in this paper. The major conclusions are followed: 1. The multimodal characteristic of grain size distribution is a common feature in all sediments and results from properties of transportation medium, dynamic intensity, transportation manner and other factors. 2. The windblown depositions are controlled by aerodynamic forcing, resulting in that the median size of the predominant mode gradually decreases form sandy dunes to loess. Similarly, the aqueous sediments are impacted by dynamic forces of water currents and the median grain size of the predominant mode decreases gradually from river to lake sediments. Because the kinetic viscidity of air is lower than of water, the grain size of modes of windblown depositions is usually finer than that of corresponding modes of aqueous sediments. Typical characteristics of sediments grain size distribution of various sediments have been summarized in the paper: (1) Suspended particles which diameters are less than 75μm are dominant in loess and dust. There are three modes in loess’ grain size distribution: fine, median and coarse (the median size is <1μm、1-10μm、10-75μm, respectively). The coarse mode which percentage is larger than that of others is controlled by source distance and aerodynamic intensity of dust source areas. Some samples also have a saltation mode which median size is about 300-500μm. Our analysis demonstrates that the interaction of wind, atmospheric turbulence, and dust grain gravity along the dust transportation path results in a multimodal grain size distribution for suspended dust. Changes in the median sizes of the coarse and medium modes are related to variation in aerodynamic forcing (lift force related to vertical wind and turbulence) during dust entrainment in the source area and turbulence intensity in the depositional area. (2) There is a predominant coarse saltation mode in grain size distribution of sandy dunes, which median size is about 100-300μm and the content is larger than that of other modes. The grain size distribution curve is near axis symmetric as a standard logarithm normal function. There are some suspended particles in some samples of sandy dunes, which distribution of the fine part is similar to that of loess. Comparing with sandy samples of river sediments, the sorting property of sandy dunes is better than of river samples although both they are the saltation mode. Thus, the sorting property is a criterion to distinguish dune sands and river sands. (3) There are 5~6 modes (median size are <1μm, 1-10μm, 10-70μm, 70-150μm, 150-400μm, >400μm respectively) in grain size distribution of lacustrine sediments. The former 4 modes are suspensive and others are saltated. Lacustrine sediments can be divided into three types: lake shore facies, transitional facies and central lake facies. The grain size distributions of the three facies are distinctly different and, at the same time, the transition among three modes is also clear. In all these modes, the third mode is a criteria to identify the windblown deposition in the watershed. In lake shore sediments, suspended particles are dominant, a saltation mode sometimes occurs and the fourth mode is the most important mode. In the transitional facies, the percentage of the fourth mode decreases and that of the second mode increases from lake shore to central lake. In the central lake facies, the second mode is dominant. A higher content of the second mode indicates its position more close to the central lake. (4) The grain size distribution of river sediments is the most complex. It consist of suspension, saltation and rolling modes. In most situations, the percentage of the saltation mode is larger than that of other modes. The percentage of suspension modes of river sediments is more than of sandy dunes. The grain size distribution of river sediments indicates dynamic strength of river currents. If the fourth mode is dominant, the dynamic forcing of river is weaker, such as in river floodplain. If the five or sixth mode is dominant, the water dynamic forcing of rivers is strong. (5) Sediments can be changed by later forcing in different degree to form some complicated deposition types. In the paper, the grain size distribution of aqueous sediments of windblown deposition, windblown sediments of aqueous deposition, weathering crust and slope materials are discussed and analyzed. 3. The grain size distribution characteristics of different sediments are concluded: (1) Modal difference: Usually there are suspended and saltation modes in the windblown deposition. The third mode is dominant in loess dust and the fifth mode is predominant in sandy dunes. There are suspended, saltation and rolling particles in aqueous sediments. In lacustrine sediments, the second and fourth mode are predominant for central lake facies or lake shore facies, respectively. In river sediments, the fourth, or fifth, or sixth mode is predominant. Suspended modes: the grain size of suspended particles of windblown depositions usually is less than 75μm. The content of suspended particles is lower or none in sandy dunes. However, suspended particles of aqueous sediments may reach 150μm. Difference in grain size of suspended modes represents difference between transitional mediums and the strength of dynamic forcing. Saltation modes: the median size of saltation mode of sandy dunes fluctuates less than that of river sediments. (2) Loess dust and lacustrine sediment: Their suspended particles are clearly different. There is an obvious pit between the second and the third modes in grain size distribution of lacustrine sediments. The phenomenon doesn’t occur in loess dust. In lacustrine sediments, the second mode can be a dominant mode, such as central lake facies, and contents of the second and the third modes change reversely. However, the percentage of the third mode is always the highest in loess dust. (3) Dune Sand and fluvial sand: In these two depositions, the saltation particles are dominant and the median sizes of their saltation modes overlay in distribution range. The fifth mode of dune sand fluctuates is sorted better than that of fluvial sand. (4) Lacustrine and fluvial sediments: In lacustrine sediments, there are 5-6 modes and suspended particles can be predominant. The second mode is dominant in central lake facies and the third mode is dominant in lake shore facies. Saltation or roll modes occurred in central lake facies may indicate strong precipitation events. In fluvial sediments, saltation particles (or rolling particles) usually dominant. 4. A estimation model of lake depth is firstly established by using contents of the second, the third and the fourth modes. 5. The paleoenvironmental history of the eastern part of SongLiao basin is also discussed by analyzing the grain size distribution of Yushu loess-like sediments in Jilin. It was found that there is a tectonic movement before 40ka B.P. in SongLiao basin. After the movement, loess dust deposited in Yushu area as keerqin desert developed. In recent 2000 years, the climate became drier and more deserts activated in the eastern part of Song-Liao basin.
Resumo:
The alkenone unsaturation paleothermometer is an important proxy to reconstruct water temperature, and is widely applied to reconstructing sea surface temperature in most oceanographic settings. Recent research indicates that long chain alkenone is preserved in lacustrine sediments, and the alkenone unsaturation has good relationship with mean annual temperature in studied lakes. Thus, the alkenone unsaturation could be used as a temperature proxy to reconstruct temperature in limnic systems. In this study, we analyzed long chain alkenone from the varved sediments in Lake Sihailongwan, northeastern China. Based on the counting varves, we established time scale during the past 1500 years. The distribution pattern in the sediment is similar with the previous study in lacustrine environment. The ratio of C37:4 methyl ketone to the sum of C37 alkenones is high. Based on the published temperature- alkenone unsaturation equation, we reconstructed the mean air temperature and July water temperature during the past 1500 years. Three major cold periods are in AD560-950, AD 1540-1600 and AD1800-1920. Three major warm periods are AD450-550, AD 950-1400 and AD 1600-1800. The Medieval Warm Period was a significant warm periods. However, the traditional “Little Ice Age” was not a persistent cold period, and interrupted by relative longer warm period. The temperature variations in this study show a general similar pattern with the summer temperature reconstruction from Shihua Cave and the winter temperature from historical documents. The temperature variations from long chain alknone record show a good agreement with solar activity (10Be data from ice core and sunspot number from tree rings). It may suggest that solar activity is most important forcing in the studied area.
Resumo:
Based on geodynamic analysis of sedimentary basins, combined sedimentology with structural geology and other methods, the author studied the Honghe basin located in Yunnan province of Southwestern China. Sandstone slice grain size analysis, combined with field geology and indoors study indicate that a set of inland alluvial fan diposits, fluvial deposites, delta deposits and some lacustrine sediments are in Honghe basin. Studying on shape of the Honghe basin, sedimentary and structural characteristic and distribution of different kinds of conglomerate and its structural significance, we hold the idea that the formation and evolution of Honghe basin are controlled by the activity of Red River faut. Correlation of lithostratic cross section in Honghe basin and studying on activity of Red River fault indicate that Honghe basin was formed in two stages. It is a complex basin constitutes of the first-stage trans-releasing basin and the second-stage trans-downfaulted basin. Due to the uplift of Qinghai-Xizang plateau and deformation of orogeny, the western Yunnan and adjacent area move to SE direction as a result of Tectonic Escape. Right lateral strike slip occurred along Red River fault, trans-releasing basin formed at the bend part of the fault due to stress relexation. As the block escaping, it moves away from the other block of the Red River fault, the upper block move down obliquely and trans-downfaulted basin formed. Combined the age of phytolite and regional structural events, we think the first-stage transreleasing basin was formed in late Miocene, on the other words, the dextral strike slip of Red River fault may began in late Miocene (10-7Ma). The second-stage trans-downfaulted basin may be formed in early stage of Pliocene (about 4.7Ma). Subsequently, the bilateral faults dipping to the inside of the plateau and thrusting outwards occurred in the marginal region of Qinghai-Xizang plateau during its uplifting as a fan-shaped mountain body, this results in the uplift of the strata to the east of Red River fault and supply large quantity of provenance for the Honghe basin. In last Pliocene (about 3Ma), strong uplift of Qinghai-Xizang plateau leads to massive clastic sediment entered Honghe basin and causes its closure. As a kind of trans-tentional basin, trans-releasing basin is different to pull-apart basin. The author compared the Mosha trans-releasing basin with Jinggu pull-apart basin in SW Yunan, China, and described their character correspondingly. Otherwise, the author combined the predecessors' studding with conclusion of own study, discussed the kinematics of Ailaoshan-Red River belt in Cenozoic, and the relationship between the formation of Honghe basin and uplifting of Qinghai-Xizang plateau.
Resumo:
The Nihewan Basin is a key area for research into human occupation at high northern latitudes in northeast Asia after the initial expansion of early humans out of Africa. Well-developed late Cenozoic lacustrine deposit sequence in this basin offers a unique opportunity to address this issue. In this thesis, detailed magnetostratigraphic investigation coupled with mineral magnetism was conducted on the Donggutuo and Cenjiawan sections in the eastern basin, where lacustrine deposits sequences containing the Donggutuo, Maliang and Cenjiawan Paleolithic sites are well developed. The sequences are mainly composed of grayish-white clays, grayish-green clayey silts, grayish-yellow silts and fine-grained brown sands, which have recorded reliable polarity variations of geomagnetic field.Characteristics of the anisotropy of magnetic susceptibility show that the sediments have preserved typical original magnetic fabric for sediments, indicating that the strata were developed in a low-energy lake environment and were never perturbed by tectonic stress since deposition. High-temperature magnetic susceptibility measurements (x-T) of representative specimens and demagnetization experiments indicate that the dominant magnetic mineral and remanent carrier at the two sections is magnetite. In addition, hematite and possibly minor maghemite exists in some portions of the sequences. The majority of the samples have relatively simple demagnetization behaviors. After removal of soft magnetic components, the stable characteristic remanent magnetizations (ChRMs) are isolated, which can represent the original remanences.The Donggutuo section mainly records the Brunhes chron, the Matuyama chron and the Jaramillo subchron. The Maliang stone artifact layer occurs just below the Brunhes/Matuyama boundary; and the Donggutuo artifact layer, just below the Jaramillo onset. Accordingly, the Maliang and Donggutuo sites can be dated at about 0.78 Ma and 1.1 Ma, respectively. The Cenjiawan section has recorded a portion of the Matuyama chron. After correlations with the magnetic polarity sequence of the Majuangou section adjacent to this section, the Cenjiawan stone artifact layer is determined below the Jaramillo onset, with an estimated age of 1.1 Ma.To establish the magnetic stratigraphy framework for the lacustrine sediments in the eastern Nihewan Basin, this thesis draws on the magnetic polarity sequences of the Donggutuo and Cenjiawan sections as well as previously obtained results from the Majuangou, Haojiatai, Xiaochangliang and Donggou sections for magnetostratigraphic correlations. The accumulation of the lacustrine sequences at the east margin of the basin commenced from about 2.0 Ma. These sequences record not only the coarse magnetostratigraphy of the Brunhes normal chron and the middle to late Matuyama reverse chron (that is, the Jaramillo and Olduvai subchrons) but also some of the fine structure (that is, the Kamikatsura, Santa Rosa, Punaruu and Cobb Mountain geomagnetic events). The development of the Nihewan paleolake experienced at least twice large expansion periods, split by a large-scale shrinking event in the middle period of the paleolake development. The accumulation of the lacustrine strata was controlled by fault activities.After temporal control for the Donggutuo, Maliang and Cenjiawan Paleolithic sites were established, the three sites along with other well-dated Paleolithic/hominin sites of the Early Pleistocene in North China were combined to construct a chronological sequence of early human occupation in northeastern Asia. Furthermore, after incorporation of paleoclimate changes retrieved from Chinese loess/paleosol sequences and marine sediments, it could be possibly proposed that human groups of the Early Pleistocene in North China might have survived repeated warm/humid interglacials and cold/dry glacials, which were paced by earth orbital variations of the Eastern paleomonsoon.
Resumo:
Yuanmou area lies on the southeastern edge of the Tibetan Plateau, the middlesegment of Yunnan-Sichuan North-South Extending Tectonic Belt and the upper reaches of the Yangztze River, which is renowned for its thick late Cenozoic fluvial-lacustrine sequences that yield rich mammalian fossils including hominoid and early human. The sediments provides great potentials for understanding the relationships between uplift of the Tibetan Plateau, evolution of hominoids and other mammalian and evolution and formation of basins in Southwest China since late Miocene. However, lithostratigrphic and chronologic views on them are controversial and hinder further discussion of the relationships of them. To this end, we selected the Baozidongqing section and the Dapoqing section to carry out systematic lithostratigraphic, magnetostratlgraphic and environmental magnetism researches in this area.The Baozidongqing section was dated to about 10.95-7.17 Ma. The age estimation of the topmost hominoid-bearing layer was about 7.43-7.17 Ma. Rock magnetic results show that the dominant magnetic carrier is hematite, with minor amount of magnetite. Both the composition and concentration of magnetic minerals strongly correlate with the lithostratigraphy, indicating that Yuanmou basin is characterized by alternating of long-term torrid-humid climate and short-term dry-hot climate. But the pattern of these short-term hot-dry events, including both the lasting time and the frequency of their occurrence dramatically changed since -8.1 Ma. Our results infer that the drying process of the Asian west interior and a significant uplift of the Tibetan Plateau would have probably caused jointly the extinction of hominoids, or the emigration of hominoids from Yuanmou to adjacent relatively torrid-humid areas.The strata between the upper of the Dapoqing section, the Niujianbao Hill and Shangnabang area can be linked by three mark layers of conglomerate, which is rather continuous and coherent than physical disturbance by new tectonic activities. Rock magnetic studies indicate that hematite is the main magnetic carriers. The section is dated back to about 2.8-1.37 Ma. Its paleocurrent flowed northeastward, which was a close and stagnant river and swamp environment about 2.2 Ma ago. Then it ran northwestward and turned into an open overflown and braid river sedimentary face during 2.2 to 1.57 Ma. Since 1.57 Ma, the paleocurrent flowed intensely northwestern and about 1.37 Ma ago, it ended the basically continuous fluvial-lacustrine deposition.