In what extent can toy premiums promote healthy eating habits?: A study with school-age children

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Speech by Mr Micheál Martin TD at Launch of Pre-Registration Nursing Degree Programme

Good afternoon ladies and gentlemen. I am very pleased that you were all able to accept my invitation to join me here today on this landmark occasion for nursing education. It is fitting that all of the key stakeholders from the health and education sectors should be so well represented at the launch of an historic new development. Rapid and unpredictable change throughout society has been the hallmark of the twenty-first century, and healthcare is no exception. Regardless of what change occurs, no one doubts that nursing is intrinsic to the health of this nation. However, significant changes in nurse education are now needed if the profession is to deliver on its social mandate to promote people´s health by providing excellent and sensitive care. As science, technology and the demands of the public for sophisticated and responsive health care become increasingly complex, it is essential that the foundation of nursing education is redesigned. Pre-registration nursing education has already undergone radical change over the past eight years, during which time it has moved from an apprenticeship model of education and training to a diploma based programme firmly rooted in higher education. The Secretary General of my Department, Michael Kelly, played a leading role in bringing about this transformation, which has greatly enhanced the way students are prepared for entry to the nursing profession. The benefits of the revised model of education are clearly evident from the quality of the nurses graduating from the diploma programme. The Commission on Nursing examined the whole area of nursing education, and set out a very convincing case for educating nursing students to degree level. It argued that nurses of the future would be required to possess increased flexibility and the ability to work autonomously. A degree programme would provide nurses with a theoretical underpinning that would enable them to develop their clinical skills to a greater extent and to respond to future challenges in health care, for the benefit of patients and clients of the health services. The Commission has provided a solid framework for the professional development of nurses and midwives, including a process that is already underway for the creation of clinical nurse specialist and advanced nurse practitioner posts. This process will facilitate the transfer of skills across divisions of nursing. In this scenario, it is clearly desirable that the future benchmark qualification for registration as a nurse should be a degree in nursing studies. A Nursing Education Forum was established in early 1999 to prepare a strategic framework for the implementation of a nursing degree programme. When launching the Forum´s report last January, I indicated that the Government had agreed in principle to the introduction of the proposed degree programme next year. At the time two substantial outstanding issues had yet to be resolved, namely the basis on which nurse teachers would transfer from the health sector to the education sector and the amount of capital and revenue funding required to operate the degree programme. My Department has brokered agreements between the Nursing Alliance and the Higher Education Institutions for the assimilation of nurse teachers as lecturers into their affiliated institutions. The terms of these agreements have been accepted by all four nursing unions following a ballot of their nurse teacher members. I would like to pay particular tribute to all nurse teachers who have contributed to shaping the position, relevance and visibility of nursing through leadership, which embodies scholarship and excellence in the profession of nursing itself. In response to a recommendation of the Nursing Education Forum, I established an Inter-Departmental Steering Committee, chaired by Bernard Carey of my Department, to consider all the funding and policy issues. This Steering Committee includes representatives of the Department of Finance and the Department of Education and Science as well as the Higher Education Authority. The Steering Committee has been engaged in intensive negotiations with representatives of the Conference of Heads of Irish Universities and the Institutes of Technology in relation to their capital and revenue funding requirements. These negotiations were successfully concluded within the past few weeks. The satisfactory resolution of the industrial relations and funding issues cleared the way for me to go to the Government with concrete proposals for the implementation of degree level education for nursing students. I am delighted to announce here today that the Government has approved all of my proposals, and that a four-year undergraduate pre-registration nursing degree programme will be implemented on a nation-wide basis at the start of the next academic year, 2002/2003. The Government has approved the provision of capital funding totalling £176 million pounds for a major building and equipment programme to facilitate the full integration of nursing students into the higher education sector. This programme is due to be completed by September 2004, and will ensure that nursing students are accommodated in purpose built schools of nursing studies with state of the art clinical skills and human science laboratories at thirteen higher education sites throughout the country. The Government has also agreed to make available the substantial additional revenue funding required to support the nursing degree programme. By 2006, the full year cost of operating the programme will rise to some £43 million pounds. The scale of this investment in pre-registration nursing education is enormous by any yardstick. It demonstrates the firm commitment of myself and my Government colleagues to the full implementation of the recommendations of the Commission on Nursing, of which the introduction of pre-registration degree level education is arguably the most important. This historic decision, and it is truly historic, will finally put the education of nurses on a par with the education of other health care professionals. The nursing profession has long been striving for parity, and my own involvement in the achievement of it is a matter of deep personal satisfaction to me. I am also pleased to announce that the Government has approved my plans for increasing the number of nursing training places to coincide with the implementation of the degree programme next year. Ninety-three additional places in mental handicap and psychiatric nursing will be created at Athlone, Letterkenny, Tralee and Waterford Institutes of Technology. This will yield 392 extra places over the four years of the degree programme. A total of 1,640 places annually on the new degree programme will thus be available. This is an all-time record, and maintaining the annual student intake at this level for the foreseeable future is a key element of my overall strategy for ensuring that we produce sufficient “home-grown” nurses for our health services. I am aware that the Nursing Alliance were anxious that some funding would be provided for the further academic career development of nurse teachers who transfer to one of the six Universities that will be involved in the delivery of the degree programme. I am happy to confirm that up to £300,000 in total per year will be available for this purpose over the first four years of the degree programme. In line with a recommendation of the Commission on Nursing, my Department will have responsibility for the administration of the nursing degree budget until the programme has been bedded down in the higher education sector. A primary concern will be to ensure that the substantial capital and revenue funding involved is ring-fenced for nursing studies. It is intended that responsibility for the budget will be transferred to the Department of Education and Science after the first cohort of nursing degree students have graduated in 2006. In the context of today´s launch, it is relevant to refer to a special initiative that I introduced last year to assist registered nurses wishing to undertake part-time nursing degree courses. Under this initiative, nurses are entitled to have their course fees paid by their employers in return for a commitment to continue working in the public health service for a period following completion of the course. This initiative has proved extremely popular with large numbers of nurses availing of it. I want to confirm here today that the free fees initiative will continue in operation until 2005, at a total cost of at least £15 million pounds. I am giving this commitment in order to assure this year´s intake of nursing students to the final diploma programmes that fee support for a part-time nursing degree course will be available to them when they graduate in three years time. The focus of today´s celebration is rightly on the landmark Government decision to implement the nursing degree programme next year. As Minister for Health and Children, and as a former Minister for Education, I also have a particular interest in the educational opportunities available to other health service workers to upgrade their skills. I am pleased to announce that the Government has approved my proposals for the introduction of a sponsorship scheme for suitable, experienced health care assistants who wish to become nurses. This new scheme will commence next year and will be administered by the health boards. Successful applicants will be allowed to retain their existing salaries throughout the four years of the degree programme in return for a commitment to work as nurses for their health service employer for a period of five years following registration. Up to forty sponsorships will be available annually. The new scheme will enable suitable applicants to undertake nursing education and training without suffering financial hardship. The greatest advantage of the scheme will be the retention by the public health service of staff who are supported under it, since they will have had practical experience of working in the service and their own personal commitment to upgrading their skills will be informed by that experience. I am confident that the sponsorship scheme will be warmly welcomed by health service unions representing care assistants as providing an exciting new career development path for their members. Education and health are now the two pillars upon which the profession of nursing rests. We must continue to build bridges, even tunnels where needed to strengthen this partnership. We must all understand partnerships donâ?Tt just happen they are designed and must be worked at. The changes outlined here today are powerful incentives for those in healthcare agencies, academic institutions and regulatory bodies to design revolutionary programmes capable of shaping a critical mass of excellent practitioners. You have an opportunity, greater perhaps than has been granted to any other generation in history to make certain those changes are for the good. Ultimately changes that will make the country a healthier and more equitable place to live. The challenge relates to building a seamless preparatory programme which equally respects both education and practise as an indivisible duo whilst ensuring that high tech does not replace the human touch. This is a special day in the history of the development of the Irish nursing profession, and I would like to thank everybody for their contribution. I want to express my particular appreciation of two people who by this stage are well known to all of you – Bernard Carey of my Department and Siobhán O´Halloran of the National Implementation Committee. Bernard and Siobhán have devoted considerable time and energy to the project on my behalf over the past fourteen months or so. That we are here today celebrating the launch of degree level education is due in no small part to their successful execution of the mandate that I gave them. We live in a rapidly changing world, one in which nursing can no longer rely on systems of the past to guide it through the new millennium. In terms of contemporary healthcare, nursing is no longer just a reciprocal kindness but rather a highly complex set of professional behaviours, which require serious educational investment. Pre-registration nurse education will always need development and redesign to ensure our health care system meets the demands of modern society. Nothing is finite. Today more than ever the health system is dependent on the resourcefulness of nursing. I have no doubt that the new educational landscape painted will ensure that nurses of the future will be increasingly innovative, independent and in demand. The unmistakable message from my Department is that nursing really matters. Thank you.

Investgiation into Improved Pavement Curing Materials and Techniques: Part 1 - Phases I and II, April 2002

Concrete curing is closely related to cement hydration, microstructure development, and concrete performance. Application of a liquid membrane-forming curing compound is among the most widely used curing methods for concrete pavements and bridge decks. Curing compounds are economical, easy to apply, and maintenance free. However, limited research has been done to investigate the effectiveness of different curing compounds and their application technologies. No reliable standard testing method is available to evaluate the effectiveness of curing, especially of the field concrete curing. The present research investigates the effects of curing compound materials and application technologies on concrete properties, especially on the properties of surface concrete. This report presents a literature review of curing technology, with an emphasis on curing compounds, and the experimental results from the first part of this research—lab investigation. In the lab investigation, three curing compounds were selected and applied to mortar specimens at three different times after casting. Two application methods, single- and double-layer applications, were employed. Moisture content, conductivity, sorptivity, and degree of hydration were measured at different depths of the specimens. Flexural and compressive strength of the specimens were also tested. Statistical analysis was conducted to examine the relationships between these material properties. The research results indicate that application of a curing compound significantly increased moisture content and degree of cement hydration and reduced sorptivity of the near-surface-area concrete. For given concrete materials and mix proportions, optimal application time of curing compounds depended primarily upon the weather condition. If a sufficient amount of a high-efficiency-index curing compound was uniformly applied, no double-layer application was necessary. Among all test methods applied, the sorptivity test is the most sensitive one to provide good indication for the subtle changes in microstructure of the near-surface-area concrete caused by different curing materials and application methods. Sorptivity measurement has a close relation with moisture content and degree of hydration. The research results have established a baseline for and provided insight into the further development of testing procedures for evaluation of curing compounds in field. Recommendations are provided for further field study.

An attempt to refine rockfall hazard zoning based on the kinetic energy, frequency and fragmentation degree

Rockfall hazard zoning is usually achieved using a qualitative estimate of hazard, and not an absolute scale. In Switzerland, danger maps, which correspond to a hazard zoning depending on the intensity of the considered phenomenon (e.g. kinetic energy for rockfalls), are replacing hazard maps. Basically, the danger grows with the mean frequency and with the intensity of the rockfall. This principle based on intensity thresholds may also be applied to other intensity threshold values than those used in Switzerland for rockfall hazard zoning method, i.e. danger mapping. In this paper, we explore the effect of slope geometry and rockfall frequency on the rockfall hazard zoning. First, the transition from 2D zoning to 3D zoning based on rockfall trajectory simulation is examined; then, its dependency on slope geometry is emphasized. The spatial extent of hazard zones is examined, showing that limits may vary widely depending on the rockfall frequency. This approach is especially dedicated to highly populated regions, because the hazard zoning has to be very fine in order to delineate the greatest possible territory containing acceptable risks.

Extent and patterns of MGMT promoter methylation in glioblastoma- and respective glioblastoma-derived spheres.

Purpose: Quantitative methylation-specific tests suggest that not all cells in a glioblastoma with detectable promoter methylation of the O6-methylguanine DNA methyltransferase (MGMT) gene carry a methylated MGMT allele. This observation may indicate cell subpopulations with distinct MGMT status, raising the question of the clinically relevant cutoff of MGMT methylation therapy. Epigenetic silencing of the MGMT gene by promoter methylation blunts repair of O6-methyl guanine and has been shown to be a predictive factor for benefit from alkylating agent therapy in glioblastoma. Experimental Design: Ten paired samples of glioblastoma and respective glioblastoma-derived spheres (GS), cultured under stem cell conditions, were analyzed for the degree and pattern of MGMT promoter methylation by methylation-specific clone sequencing, MGMT gene dosage, chromatin status, and respective effects on MGMT expression and MGMT activity. Results: In glioblastoma, MGMT-methylated alleles ranged from 10% to 90%. In contrast, methylated alleles were highly enriched (100% of clones) in respective GS, even when 2 MGMT alleles were present, with 1 exception (<50%). The CpG methylation patterns were characteristic for each glioblastoma exhibiting 25% to 90% methylated CpGs of 28 sites interrogated. Furthermore, MGMT promoter methylation was associated with a nonpermissive chromatin status in accordance with very low MGMT transcript levels and undetectable MGMT activity. Conclusions: In MGMT-methylated glioblastoma, MGMT promoter methylation is highly enriched in GS that supposedly comprise glioma-initiating cells. Thus, even a low percentage of MGMT methylation measured in a glioblastoma sample may be relevant and predict benefit from an alkylating agent therapy. Clin Cancer Res; 17(2); 255-66. (C)2010 AACR.

Extent and Patterns of MGMT Promoter Methylation in Glioblastoma- and Respective Glioblastoma-Derived Spheres.

PURPOSE: Quantitative methylation-specific tests suggest that not all cells in a glioblastoma with detectable promoter methylation of the O6-methylguanine DNA methyltransferase (MGMT) gene carry a methylated MGMT allele. This observation may indicate cell subpopulations with distinct MGMT status, raising the question of the clinically relevant cutoff of MGMT methylation therapy. Epigenetic silencing of the MGMT gene by promoter methylation blunts repair of O6-methyl guanine and has been shown to be a predictive factor for benefit from alkylating agent therapy in glioblastoma. EXPERIMENTAL DESIGN: Ten paired samples of glioblastoma and respective glioblastoma-derived spheres (GS), cultured under stem cell conditions, were analyzed for the degree and pattern of MGMT promoter methylation by methylation-specific clone sequencing, MGMT gene dosage, chromatin status, and respective effects on MGMT expression and MGMT activity. RESULTS: In glioblastoma, MGMT-methylated alleles ranged from 10% to 90%. In contrast, methylated alleles were highly enriched (100% of clones) in respective GS, even when 2 MGMT alleles were present, with 1 exception (<50%). The CpG methylation patterns were characteristic for each glioblastoma exhibiting 25% to 90% methylated CpGs of 28 sites interrogated. Furthermore, MGMT promoter methylation was associated with a nonpermissive chromatin status in accordance with very low MGMT transcript levels and undetectable MGMT activity. CONCLUSIONS: In MGMT-methylated glioblastoma, MGMT promoter methylation is highly enriched in GS that supposedly comprise glioma-initiating cells. Thus, even a low percentage of MGMT methylation measured in a glioblastoma sample may be relevant and predict benefit from an alkylating agent therapy. Clin Cancer Res; 17(2); 255-66. ©2010 AACR.

Relationships between fetal body weight of Wistar rats at term and the extent of skeletal ossification

We investigated the relationship between fetal body weight at term (pregnancy day 21) and the extent of ossification of sternum, metacarpus, metatarsus, phalanges (proximal, medial and distal) of fore- and hindlimbs and cervical and coccygeal vertebrae in Wistar rats. The relationships between fetal body weight and sex, intrauterine position, uterine horn, horn size, and litter size were determined using historical control data (7594 fetuses; 769 litters) of untreated rats. Relationships between body weight and degree of ossification were examined in a subset of 1484 historical control fetuses (154 litters) which were subsequently cleared and stained with alizarin red S. Fetal weight was independent of horn size, uterine horn side (left or right) or intrauterine position. Males were heavier than females and fetal weight decreased with increasing litter size. Evaluation of the skeleton showed that ossification of sternum, metacarpus and metatarsus was extensively complete and independent of fetal weight on pregnancy day 21. In contrast, the extent of ossification of fore- and hindlimb phalanges and of cervical and sacrococcygeal vertebrae was dependent on fetal body weight. The strongest correlation between body weight and degree of ossification was found for hindlimb, medial and proximal phalanges. Our data therefore suggest that, in full-term rat fetuses (day 21), reduced ossification of sternum, metacarpus and metatarsus results from a localized impairment of bone calcification (i.e., a malformation or variation) rather than from general growth retardation and that ossification of hindlimb (medial and proximal) phalanges is a good indicator of treatment-induced fetal growth retardation.

Technology transfer in the fish curing industry in india

Curing is the oldest and cheapest method of preservation of fish allover the world. Fish curing industry has not shown much improverrent from its primitive nature because this industry is mainly handled by illiterate and less educated fishermen/fisherwomen. They do not know much about,the importance of scientific methods of fish curing. The cured fish produced by them is unhygienic and poor in quality. Because of the negligenence and ignorance of the fish curers, a considerable quanti ty of this protein rich food is spoiled and lost every year. Research has been conducted extensively in the Cen tral and State sectors and various remedial measures have been suggested :to improve the fish curing industry in India. Inspi te of the preJudioa against cured fish because of their existing low quality, research work in recent years have indicated that their quality can be greaUy improved and shelf-life prolonged if the me thods are standardised. To achieve this aim, Cen tral and s tate Departments have already made considerable efforts to transfer the improved methods ~ the fish curing industry by way of traininq courses, demonstrations, Lab, to Land Prograrrmesi film shows, exhibitions, personal discussion etc. As the result of this, fish curers have started adopting the improved practices in fish curing. Still there seems to be a considerable qap between the techmology available and the technology adopted in this field. A comprehensive study on the extent of adoption of improved practices in fish curing and the factors involved in low or non-adoption of certain aspects is lackin~ at present. This gap has to be filled up. The possihle methods for the effective transfer of technology for the production and distribution of high quali ty cured fish products and improvement of soclo-economic condition of fishermen engaqed in fish curing have to be identified.

Effect of Pre-Heating Resin Composite and Light-Curing Units on Monomer Conversion

The purpose of this study was to evaluate the effect of pre-heating resin composite photo-cured with light-curing units (LCU) by FT-IR. Twenty specimens were made in a metallic mold (4 mm diameter x 2 mm thick) from composite resin-Tetric Ceram (R) (Ivoclar/Vivadent) at room temperature (25 degrees C) and pre heated to 37, 54, and 60 degrees C. The specimens were cured with halogen curing light (QTH) and light emitted by diodes (LED) during 40 s. Then, the specimens were pulverized, pressed with KBr and analyzed with FT-IR. The data were submitted to statistical analysis of variance and Kruskal-Wallis test. Study data showed no statistically significant difference to the degree of conversion for the different light curing units (QTH and LED) (p > 0.05). With the increase of temperature there was significant increase in the degree of conversion (p < 0.05). In this study were not found evidence that the light curing unit and temperature influenced the degree of conversion.

Influence of different light sources and photo-activation methods on degree of conversion and polymerization shrinkage of a nanocomposite resin

The purpose of this study was to evaluate the influence of different light sources and photo-activation methods on degree of conversion (DC%) and polymerization shrinkage (PS) of a nanocomposite resin (Filtek (TM) Supreme XT, 3M/ESPE). Two light-curing units (LCUs), one halogen-lamp (QTH) and one light-emitting-diode (LED), and two different photo-activation methods (continuous and gradual) were investigated in this study. The specimens were divided in four groups: group 1-power density (PD) of 570 mW/cm(2) for 20 s (QTH); group 2-PD 0 at 570 mW/cm(2) for 10 s + 10 s at 570 mW/cm(2) (QTH); group 3-PD 860 mW/cm(2) for 20 s (LED), and group 4-PD 125 mW/cm(2) for 10 s + 10 s at 860 mW/cm(2) (LED). A testing machine EMIC with rectangular steel bases (6 x 1 x 2 mm) was used to record the polymerization shrinkage forces (MPa) for a period that started with the photo-activation and ended after two minutes of measurement. For each group, ten repetitions (n = 40) were performed. For DC% measurements, five specimens (n = 20) for each group were made in a metallic mold (2 mm thickness and 4 mm diameter, ISO 4049) and them pulverized, pressed with bromide potassium (KBr) and analyzed with FT-IR spectroscopy. The data of PS were analyzed by Analysis of Variance (ANOVA) with Welch`s correction and Tamhane`s test. The PS means (MPa) were: 0.60 (G1); 0.47 (G2); 0.52 (G3) and 0.45 (G4), showing significant differences between two photo-activation methods, regardless of the light source used. The continuous method provided the highest values for PS. The data of DC% were analyzed by Analysis of Variance (ANOVA) and shows significant differences for QTH LCUs, regardless of the photo-activation method used. The QTH provided the lowest values for DC%. The gradual method provides lower polymerization contraction, either with halogen lamp or LED. Degree of conversion (%) for continuous or gradual photo-activation method was influenced by the LCUs. Thus, the presented results suggest that gradual method photo-activation with LED LCU would suffice to ensure adequate degree of conversion and minimum polymerization shrinkage.

Changes on degree of conversion of dual-cure luting light-cured with blue LED

The indirect adhesive procedures constitute recently a substantial portion of contemporary esthetic restorative treatments. The resin cements have been used to bond tooth substrate and restorative materials. Due to recently introduction of the self-bonding resin luting cement based on a new monomer, filler and initiation technology has become important to study the degree of conversion of these new materials. In the present work the polymerization reaction and the filler content of dual-cured dental resin cements were studied by means of infra-red spectroscopy (FT-IR) and thermogravimetry (TG). Twenty specimens were made in a metallic mold (8 mm diameter x 1 mm thick) from each of 2 cements, PanaviaA (R) F2.0 (Kuraray) and RelyX (TM) Unicem Applicap (3M/ESPE). Each specimen was cured with blue LED with power density of 500 mW/cm(2) for 30 s. Immediately after curing, 24 and 48 h, and 7 days DC was determined. For each time interval 5 specimens were pulverized, pressed with KBr and analyzed with FT-IR. The TG measurements were performed in Netzsch TG 209 under oxygen atmosphere and heating rate of 10A degrees C/min from 25 to 700A degrees C. A two-way ANOVA showed DC (%) mean values statistically significance differences between two cements (p < 0.05). The Tukey`s test showed no significant difference only for the 24 and 48 h after light irradiation for both resin cements (p > 0.05). The Relx-Y (TM) Unicem mean values were significantly higher than PanaviaA (R) F 2.0. The degree of conversion means values increasing with the storage time and the filler content showed similar for both resin cements.

Degree of Conversion and Temperature Increase of a Composite Resin Light Cured with an Argon Laser and Blue LED

Different light sources and power densities used on the photoactivation process may provide changes in the degree of conversion (DC%) and temperature ( T) of the composite resins. Thus, the purpose of this study was to evaluate the DC (%) and T (degrees C) of the microhybrid composite resin (Filtek (TM) Z-250, 3M/ESPE) photoactivated with one argon laser and one LED (light-emitting diode) with different power densities. For the KBr pellet technique, the composite resin was placed into a metallic mould (2-mm thickness, 4-mm diameter) and photoactivated as follows: a continuous argon laser (CW) and LED LCUs with power density values of 100, 400, 700, and 1000 mW/cm(2) for 20 s. The measurements for DC (%) were made in a FTIR spectrometer Bomen ( model MB 102, Quebec, Canada). Spectroscopy ( FTIR) spectra for both uncured and cured samples were analyzed using an accessory of the reflectance diffusion. The measurements were recorded in absorbance operating under the following conditions: 32 scans, 4 cm(-1) resolution, 300 to 4000-cm(-1) wavelength. The percentage of unreacted carbon double bonds (% C=C) was determined from the ratio of absorbance intensities of aliphatic C=C (peak at 1638 cm(-1)) against an internal standard before and after the curing of the specimen: aromatic C-C (peak at 1608 cm(-1)). For T (degrees C), the samples were created in a metallic mould (2-mm thickness, 4-mm diameter) and photoactivated for 20 s. The thermocouple was attached to the multimeter allowing temperature readings. The DC (%) and T (degrees C) were submitted to ANOVA and Tukey`s test (p < 0.05). The degree of conversion values varied from 35.0 to 50.0% ( 100 to 1000 mW/cm(2)) for an argon laser and from 41.0 to 49% (100 to 1000 mW/cm(2)) for an LED. The temperature change values varied from 1.1 to 13.1 degrees C (100 to 1000 mW/cm(2)) for an argon laser and from 1.9 to 15.0 degrees C (100 to 1000 mW/cm(2)) for an LED. The power densities showed a significant effect on the degree of conversion and changes the temperature for both light-curing units.

Effect of power densities and irradiation times on the degree of conversion and temperature increase of a microhybrid dental composite resin

The different parameters used for the photoactivation process provide changes in the degree of conversion (DC%) and temperature rise (TR) of the composite resins. Thus, the purpose of this study was to evaluate the DC (%) and TR of the microhybrid composite resin photoactivated by a new generation LED. For the KBr pellet technique, the composite resin was placed into a metallic mould (1-mm thickness and 4-mm diameter) and photoactivated as follows: continuous LED LCU with different power density values (50-1000 mW/cm(2)). The measurements for the DC (%) were made in a FTIR Spectrometer Bomen (model MB-102, Quebec-Canada). The spectroscopy (FTIR) spectra for both uncured and cured samples were analyzed using an accessory for the diffuse reflectance. The measurements were recorded in the absorbance operating under the following conditions: 32 scans, 4-cm(-1) resolution, and a 300 to 4000-cm(-1) wavelength. The percentage of unreacted carbon-carbon double bonds (% C=C) was determined from the ratio of the absorbance intensities of aliphatic C=C (peak at 1638 cm(-1)) against an internal standard before and after the curing of the specimen: aromatic C-C (peak at 1608 cm-1). For the TR, the samples were made in a metallic mould (2-mm thickness and 4-mm diameter) and photoactivated during 5, 10, and 20 s. The thermocouple was attached to the multimeter to allow the temperature readings. The DC (%) and TR were calculated by the standard technique and submitted to ANOVA and Tukey`s test (p < 0.05). The degree of conversion values varied from 35.0 (+/- 1.3) to 45.0 (+/- 2.4) for 5 s, 45.0 (+/- 1.3) to 55.0 (+/- 2.4) for 10 s, and 47.0 (+/- 1.3) to 52.0 (+/- 2.4) for 20 s. For the TR, the values ranged from 0.3 (+/- 0.01) to 5.4 (+/- 0.11)degrees C for 5 s, from 0.5 (+/- 0.02) to 9.3 (+/- 0.28)degrees C for 10 s, and from 1.0 (+/- 0.06) to 15.0 (+/- 0.95)degrees C for 20 s. The power densities and irradiation times showed a significant effect on the degree of conversion and temperature rise.

Continuous and gradual photo-activation methods: influence on degree of conversion and crosslink density of composite resins

Thermal properties and degree of conversion (DC%) of two composite resins (microhybrid and nanocomposite) and two photo-activation methods (continuous and gradual) displayed by the light-emitting diode (LED) light-curing units (LCUs) were investigated in this study. Differential scanning calorimetry (DSC) thermal analysis technique was used to investigate the glass transition temperature (T(g)) and degradation temperature. The DC% was determined by Fourier transform infrared spectroscopy (FT-IR). The results showed that the microhybrid composite resin presented the highest T(g) and degradation temperature values, i.e., the best thermal stability. Gradual photo-activation methods showed higher or similar T(g) and degradation temperature values when compared to continuous method. The Elipar Freelight 2 (TM) LCU showed the lowest T(g) values. With respect to the DC%, the photo-activation method did not influence the final conversion of composite resins. However, Elipar Freelight 2 (TM) LCU and microhybrid resin showed the lowest DC% values. Thus, the presented results suggest that gradual method photo-activation with LED LCUs provides adequate degree of conversion without promoting changes in the polymer chain of composite resins. However, the thermal properties and final conversion of composite resins can be influenced by the kind of composite resin and LCU.

Influence of light guide tip used in the photo-activation on degree of conversion and hardness of one nanofilled dental composite

The aim of this study was to evaluate the degree of conversion and hardness of a dental composite resin Filtek (TM) Z-350 (3M ESPE, Dental Products St. Paul, MN) photo-activated for 20 s of irradiation time with two different light guide tips, metal and polymer, coupled on blue LED Ultraled LCU (Dabi Atlante, SP, Brazil). With the metal light tip, power density was of 352 and with the polymer was of 456 mW/cm(2), respectively. Five samples (4 mm in diameter and 2mm in thickness-ISO 4049), were made for each Group evaluated. The measurements for DC (%) were made in a Nexus-470 FT-IR, Thermo Nicolet, E.U.A. Spectroscopy (FTIR). Spectra for both uncured and cured samples were analyzed using an accessory of reflectance diffuse. The measurements were recorded in absorbance operating under the following conditions: 32 scans, 4 cm(-1) resolution, 300-4000 cm(-1) wavelength. The percentage of unreacted carbon double bonds (% C=C) was determined from the ratio of absorbance intensities of aliphatic C=C (peak at 1637 cm(-1)) against internal standard before and after curing of the sample: aromatic C-C (peak at 1610 cm(-1)). The Vickers hardness measurements (top and bottom surfaces) were performed in a universal testing machine (Buehler MMT-3 digital microhardness tester Lake Bluff, Illinois USA). A 50 gf load was used and the indenter with a dwell time of 30 s. The data were submitted to the test t Student at significance level of 5%. The mean values of degree of conversion for the polymer and metal light guide tip no were statistically different (p = 0.8389). The hardness mean values were no statistically significant different among the light guide tips (p = 0.6244), however, there was difference between top and bottom surfaces (p < 0.001). The results show that so much the polymer light tip as the metal light tip can be used for the photo-activation, probably for the low quality of the light guide tip metal.