On the development of a test-bed application for the ART-WiSe architecture

The ART-WiSe (Architecture for Real-Time communications in Wireless Sensor Networks) framework aims at the design of new communication architectures and mechanisms for time-sensitive Wireless Sensor Networks (WSNs). We adopted a two-tiered architecture where an overlay Wireless Local Area Network (Tier 2) serves as a backbone for a WSN (Tier 1), relying on existing standard communication protocols and commercial-off-the-shell (COTS) technologies – IEEE 802.15.4/ZigBee for Tier 1 and IEEE 802.11 for Tier 2. In this line, a test-bed application is being developed for assessing, validating and demonstrating the ART-WiSe architecture. A pursuit-evasion application was chosen since it fulfils a number of requirements, namely it is feasible and appealing and imposes some stress to the architecture in terms of timeliness. To develop the testbed based on the previously referred technologies, an implementation of the IEEE 8021.5.4/ZigBee protocols is being carried out, since there is no open source available to the community. This paper highlights some relevant aspects of the ART-WiSe architecture, provides some intuition on the protocol stack implementation and presents a general view over the envisaged test-bed application.

Liaisons dangereuses, conservation of modern and contemporary art: a study of the synthetic binding media in Portugal

Dissertação apresentada para obtenção do Grau de Doutor em Conservação e Restauro, especialidade de Ciências da Conservação, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Una proposta d'itinerari cultural a l'entorn de l'art

Reflexió sobre les possibilitats que tenen els espais d’art contemporani de les comarques gironines de constituir-se en punts de referència importants com a dinamitzadors de turisme cultural

Travelling in a Palimpsest : Finnish nineteenth-century painters' encounters with Spanish art and culture

Utgångspunkten för avhandlingen är finländska konstnärsresor till Spanien under 1800-talet, och kontakterna med spansk konst och kultur. Endast ett fåtal finländare reste till Spanien, och inledningsvis utrycktes intresset för spansk konst i form av kopior efter gamla mästare, utförda både efter original utanför Spanien, och reproduktioner. Denna föga imponerande start efterföljdes av ett litet antal målare som verkligen reste till Spanien under 1800-talets senare hälft: Adolf von Becker (1831–1909), Albert Edelfelt (1854–1905) och Venny Soldan (1863–1945). Jag undersöker hur deras syn på landet manifesterades i deras resebilder i förhållande till den växande turistindustrin. Syftet med avhandlingen är att visa hur den resande målaren, likt en turist, föreställde sig, upplevde och tolkade den främmande kulturen, och hur detta avbildades och uttrycktes i deras resebilder. Vid sidan av ikonografisk analys och stilkritik utnyttjas forskningsmetoder från turismteorin. Resultatet av undersökningen visar att de flesta konstnärerna dyrkade konsten på Prado-museet, beundrade flamenco, Andalusiens vackra kvinnor, tjurfäktningar och zigenarna. De längtade efter en förgången och exotisk tid, samtidigt som de följde de vältrampade turiststigarna och hänfördes av de sedvanliga sevärdheterna; de reste i ett delvis mytiskt och delvis verkligt land. Likt turister (i allmänhet), såg de det de ville se, och sökte sig till på förhand inpräntade mentala (före)bilder. Resebilderna kan med fog tolkas som medvetet konstruerade minnen från resan, souvenirs d’Espagne. Samtidigt förstärkte och upprätthöll valen av motiv uppfattningen att Spaniens äldre konst och samtida kultur var mer ”äkta” (autentiska) än den kultur man själv tillhörde. Spanien uppfattades som en kvarleva från en förgången tid som hölls levande i nuet

Den etiske akten : den caritative etikken når pasientens fordringer er av eksistensiell art

The purpose of this thesis is to develop a theory model about some core concepts and phenomena within caritative ethics when patients' demands are existential. There are two research questions, (A) Which realities represent concepts such courage, responsibility, and sacrifice within the caritative ethics. (B) Which phenomena of ethical significance are made current and applicable when patients¿ demands are existential. This study takes as its point of departurecertain chosen theoretical perspectives that discuss some perspectives of the concepts of courage, responsibility, and sacrifice in terms of their significanceto the research questions A. This represents the study¿s theoretical data. The empirical data provide answers to the research question B. In the end, the thesis discusses synthesis of these two accesses of knowledge in order to formulate theses and create a theory model. Løgstrup's contribution and description of the ethical claim helps in understanding and interpreting the links between the substance of the caritative ethic and the concrete reality in the encounter with existential issues. This thesis is a study within the field of Caring Science. The nursing profession provides empirical data and reflects the study topic, by addressing issues of relevance to the application of the knowledge of Caring Sciencein light of the nursing profession's various daily challenges. This study proceeds from the basic assumption: "Caring relationships form the meaningful contextfor caring and derive from the ethos of love, responsibility, and sacrifice, i.e. a caritative ethics" (Eriksson 2001). This study attempts to explore and prove this statement in the light of theoretical and empirical data, in the light ofthe caring scientific perspective which is here linked particularly to the viewof man as a unity of body, mind, and soul, and to the ontological health model. Hermeneutics is the overall perspective for the interpretations proposed in this thesis. Through conversation and hermeneutic observations, I try to understandthe challenges of nursing performance in the encounter with existential issues. This constitutes the empirical data that was gathered on a ward treating cancerpatients. The discussion proceeds sequence by sequence, first by discussing theconditions of the caritative ethics when meeting the existential claims in the light of the concepts of courage, sacrifice, and responsibility. Then a thesis is formulated concerning the caritative ethics in the light of Caring Science. This is the foundation of the creation of the theory model. The resulting theses concern the chosen concepts and phenomena which promote caritative ethics when patients' claims are existential: Freedom is the hallmark of caritative ethics. Freedom is the basic category of caring. When attending to the patient's existential claims, it is of vital importance to secure human relationships as caring interpersonal communions, created by responsible persons who have shown courage and sacrifice. Courage and sacrifice constitute the ethos of caring communities (communions). Courage and sacrifice are then a part of the collective ethos of caring communities, because the patient is confirmed as the unity of body, mind, and soul.

Una proposta d'itinerari cultural a l'entorn de l'art

Reflexió sobre les possibilitats que tenen els espais d’art contemporani de les comarques gironines de constituir-se en punts de referència importants com a dinamitzadors de turisme cultural

Turning of compacted graphite iron using commercial tiN coated Si 3N4 under dry machining conditions

Due to their high hardness and wear resistance Si3N4 based ceramics are one of the most suitable cutting tool materials for machining hardened materials. Therefore, their high degree of brittleness usually leads to inconsistent results and sudden catastrophic failures. Improvement of the functional properties these tools and reduction of the ecological threats may be accomplished by employing the technology of putting down hard coatings on tools in the state-of-the-art PVD processes, mostly by improvement of the tribological contact conditions in the cutting zone and by eliminating the cutting fluids. However in this paper was used a Si3N4 based cutting tool commercial with a layer TiN coating. In this investigation, the performance of TiN coating was assessed on turning used to machine an automotive grade compacted graphite iron. As part of the study were used to characterise the performance of cutting tool, flank wear, temperature and roughness. The results showed that the layer TiN coating failed to dry compacted graphite iron under aggressive machining conditions. However, using the measurement of flank wear technique, the average tool life of was increased by VC=160 m/min.The latter was also observed using a toolmakers microscope and scanning electron microscopy (SEM).

In vitro surface roughness of different glass ionomer cements indicated for ART restorations

Aim: The aim of this in vitro study was to evaluate the surface roughness of three glass ionomer cements (GICs) indicated for ART restorations. Methods: Ten cylindrical specimens of three commercial glass ionomers cements (Vidrion R - S.S. White, Maxxion R - FGM and Vitromolar DFL) were prepared (n=30) without surface finishing or protection. Twenty-four hours after preparation, the surface roughness measurements were obtained as the mean of three readings of the surface of each specimen by profilometry. The roughness values (Ra, μm) were subjected to one-way ANOVA and Tukey's test (p<0.05). Results: No statistically significant differences were observed between Vidrion R (0.18 ± 0.05) and Vitromolar (0.21 ± 0.05), whereas Maxxion R presented significantly higher roughness values than those of the other materials. Conclusions: It may be concluded that characteristics of particle size and composition of the different GICs affected their surface roughness 24 h after preparation.

State of the art on animal embryonic chimeras

Embryonic chimerism is generally used in basic research and in vivo diagnosis of undifferentiated embryonic stem cells (ESC), mostly using mice embryos, although there have been reports in the literature on using rat, rabbit, sheep, chicken, primate, bovine, goat and pig embryos. Several techniques can currently be used to produce chimeric embryos, including microinjection, co-culture with ESC, fusion and aggregation. Although microinjection is the most commonly used method in mice, the mere aggregation of embryos with ESC may result in viable chimeras and be as efficient as microinjection. In mice, this chimerism technique has been shown to have the advantage of aggregating embryos in different stages of development with different ploidy, in addition to using ESC in the tetraploid complementation assay. Compared to other techniques for producing chimeras, the aggregation technique is a cheaper, faster and easier methodology to be performed. Moreover, aggregation can be simplified by chemically removing the zona pellucida with pronase or acidic Tyrode’s solution and be enhanced by using the Well of the Well culture system in combination with adhesion molecules, such as phytohemagglutinin. The most commonly used stages for chimerism by aggregation are those that precede the full compaction of the morula. In these stages, embryos have low-tension adherent junctions at the tangential point between two blastomeres. During the embryonic development of mice, the inner cell mass differentiates into epiblast and hypoblast. These layers will originate the fetal tissues and a portion of the extraembryonic tissues (yolk sac, allantois and amnion), whereas the trophectoderm (TE) gives rise to the chorion. A functional TE is essential for the complex molecular communications that occur between the embryo and the uterus. Embryos produced by somatic cell nuclear transfer, such as commercial cattle clones or endangered species, are subject to large fetal and neonatal losses. Hence embryo complementation with heterologous TE could be of assistance to decrease these losses and might as well assist development of high-value embryos in other approaches.

Pulsing With Low Concentration Gibberellin Plus Benzyladenine or Commercial Floral Preservatives Affect Postharvest Longevity, Quality, and Leaf Chlorosis of Cut Lilies and Gladioli

Effects of pulsing with different concentrations of gibberellin plus benzyladenine (GA(4+7) + BA), a proprietary mixture of GA(4+7) plus BA in a commercial floral preservative (GA(4+7) + BA + preservative), or a propriety mixture of sugar plus acidifier developed for bulbous flowers (floral bulb preservative) were studied on postharvest performance and quality of cut lily (Lilium hybrids) and gladiolus ( Gladiolus hybrids) flowers. Pulsing of cut stems of lily with GA(4+7) + BA at 5 or 2 mL.L-1 GA(4+7) + BA + preservative for 20 hours at 3 +/- 1 degrees C extended the vase life and controlled leaf chlorosis of 'Cobra'oriental lily and 'Cappuccino'and Pot Corn'asiatic lily. Cut 'Orange Art'asiatic lily performed best when pulsed with GA(4+7) + BA at 10 mg.L-1. For cut gladiolus, pulsing with GA(4+7) + BA at 10 mg.L-1 extended the vase life of 'Alice', 'Mammoth', and 'Passion', while 'Scarlet'had the longest vase life when pulsed with 5 mg.L-1 GA(4+7) + BA. GA(4+7) + BA + preservative also extended the vase life and controlled leaf chlorosis, but the floral bulb preservative had no effect on vase life extension or preventing leaf chlorosis of lilies. Gladiolus cultivars had no or minor leaf chlorosis during vase period. Overall, overnight pulsing with GA(4+7) + BA + or GA(4+7) + BA + preservative extended the vase life and prevented leaf chlorosis

Environmental management reform for sustainable farming, fisheries and aquaculture: state of the art review

FOOD-CT-2007-036298: AquAgriS. Project co-funded by the European Commission within the Sixth Framework (2002-2006)