Anéis aromáticos condensados e relação E4/E6: estudo de ácidos húmicos de gleissolos por RMN de 13C no estado sólido utilizando a técnica CP/MAS desacoplamento defasado

In this work, seven samples of humic acids extracted from gleysoils were investigated. These studies, using NMR CP/MAS 13C techniques, did not show significant correlation between the E4/E6 ratio and the degree of aromaticity. However, dipolar dephasing (DD) measurements of condensed aromatic or substituted carbons showed a negative correlation of 0.94. Also, there was a good correlation between the amount of semiquinone free radicals measured by the EPR technique and condensed aromatic rings measured by NMR CP/MAS 13C with the DD technique. The content of semiquinone free radicals was quantified by EPR spectroscopy and was correlated with the humification (degree of aromaticity) of the humic substances. The results indicated that the E4/E6 ratio identifies the degree of aromatic rings condensation. It was also found that the degree of aromaticity, measured by NMR, as frequently presented in the literature (by conventional CP/MAS), underestimates aromatic rings in condensed structures.

Aromaticidade: evolução histórica do conceito e critérios quantitativos

In this paper the evolution of the concept of aromaticity is discussed. It considers not only historical aspects of the aromaticity concept but also the different criteria (theoretical and experimental) that have appeared to explain the properties of the aromatic compounds. The topics range from the isolation of benzene by Faraday (1825) until the modern criteria based on geometries, magnetic properties, resonance energy (RE), aromatic stabilization energy (ASE), topological analyses, and others. A chronological separation of issues concerning aromaticity was made, splitting the definitions before and after the appearance of the quantum chemistry. This work reviews the concept of aromaticity.

Separation and characterization of asphaltenic subfractions

The structure of the various asphaltenic subfractions found in crude oil was evaluated. For this purpose, C5 asphaltenes were extracted from an asphaltic residue using n-pentane as the flocculant solvent. The different subfractions were isolated from the C5 asphaltenes by the difference in solubility in different solvents. These were characterized by infrared spectroscopy, nuclear magnetic resonance, X-ray fluorescence, elementary analysis and mass spectrometry. The results confirmed that the subfractions extracted with higher alkanes had greater aromaticity and molar mass. However, small solubility variations between the subfractions were attributed mainly to the variation in the concentrations of cyclical hydrocarbon compounds and metals.

Processo de estabilização de resíduos orgânicos: vermicompostagem versus compostagem

Two processes are used to stabilize organic wastes: composting and vermicomposting.There are no studies in the literature showing which process is most effective over the short term. In this study, 3 organic wastes were composted and vermicomposted for 90 days, and the parameters pH, effective cation exchange capacity, total organic carbon, total Kjeldahl nitrogen, Ptotal, E4/E6 ratio, hydrophobicity and aromaticity indexes were determined. In all experiments, vermicomposted materials showed higher stability, proving a superior tool for stabilization of these organic wastes.

Frações da matéria orgânica e propriedades redox de substâncias húmicas em sedimentos de oceanos profundos

Previous studies have verified that free radicals such as quinone moieties in organic matter participate in the redox reactions in natural systems. These functional groups were positively correlated with the increase in aromaticity and hydrophobicity of the humic substances. As an alternative to relatively complex and expensive spectroscopic methods, the redox properties of the humic substances, determined by potentiometric titrations, have been used to evaluate organic carbon stability in soil and sediments. The present study aimed to perform organic matter fractionation and isolation of humic substances from deep oceans in different isobaths (750; 1,050; 1,350; 1,650; 1,950 m) to determine their redox properties by iodimetric titrations under an inert atmosphere and specified conditions of pH and ionic strength. Sediment samples were collected to the North and South of platforms of petroleum exploration located in the North of Rio de Janeiro State, Brazil. Fractions of organic carbon and redox properties of humic substances varied with origin and depth of the samples and with position North and South of the petroleum exploration area.

COMPARISON BETWEEN ASPHALTENES (SUB)FRACTIONS EXTRACTED FROM TWO DIFFERENT ASPHALTIC RESIDUES: CHEMICAL CHARACTERIZATION AND PHASE BEHAVIOR

Asphaltenes are blamed for various problems in the petroleum industry, especially formation of solid deposits and stabilization of water-in-oil emulsions. Many studies have been conducted to characterize chemical structures of asphaltenes and assess their phase behavior in crude oil or in model-systems of asphaltenes extracted from oil or asphaltic residues from refineries. However, due to the diversity and complexity of these structures, there is still much to be investigated. In this study, asphaltene (sub)fractions were extracted from an asphaltic residue (AR02), characterized by NMR, elemental analysis, X-ray fluorescence and MS-TOF, and compared to asphaltene subfractions obtained from another asphaltic residue (AR01) described in a previous article. The (sub)fractions obtained from the two residues were used to prepare model-systems containing 1 wt% of asphaltenes in toluene and their phase behavior was evaluated by measuring asphaltene precipitation onset using optical microscopy. The results obtained indicated minor differences between the asphaltene fractions obtained from the asphaltic residues of distinct origins, with respect to aromaticity, elemental composition (CHN), presence and content of heteroelements and average molar mass. Regarding stability, minor differences in molecule polarity appear to promote major differences in the phase behavior of each of the asphaltene fractions isolated.

Índexos de localització i deslocalització derivats de la densitat bielectrònica: anàlisi i aplicacions en estructura molecular, reactivitat química i aromaticitat

La present tesi doctoral s'emmarca dins el camp de la química teòrica i computacional. El primer objectiu, que va ser el de partida, consistia a veure si els índexos bielectrònics derivats de la teoria AIM podien ser útils per estudiar la reorganització electrònica al llarg d'una reacció. De forma paral·lela es va plantejar un objectiu metodològic, el càlcul dels índexos mencionats a altres nivells de teoria, com podia ser DFT o CI. CI. Aquests dos objectius varen portar a molts d'altres, tot i que els principals són: Objectiu 1. Estudi de la reorganització de parells d'electrons al llarg d'una reacció. Objectiu 2. Efecte de la solvatació sobre l'estructura de parells d'electrons d'una molècula. Objectiu 3. Càlcul dels índexos de localització i deslocalització als nivells de teoria del funcional de la densitat i post-Hartree-Fock. Objectiu 4. Caracterització de l'enllaç per pont d'hidrogen per mitjà de l'estructura dels parells d'electrons. Objectiu 5. L'índex de deslocalització: nou criteri electrònic d'aromaticitat.

Single and multiple addition to C60. A computational chemistry study

Des del seu descobriment, a la molècula C60 se li coneixen una varietat de derivats segons el tipus de funcionalització amb propietats fisicoquímiques específiques de gran interès científic. Una sel·lecció de derivats corresponents a addicions simple o múltiple al C60 s'ha considerat en aquest treball d'investigació. L'estudi a nivell de química computacional de diversos tipus d'addició al C60 s'han portat a terme per tal de poder donar resposta a aspectes que experimentalment no s'entenen o són poc clars. Els sistemes estudiats en referència a l'addició simple al C60 han estat en primer lloc els monoiminoful·lerens, C60NR, (de les dues vies proposades per la seva síntesi, anàlisis cinètic i termodinàmic han ajudat a explicar els mecanismes de formació i justificar l'addició a enllaços tipus [5,6]), i en segon lloc els metanoful·lerens i els hidroful·lerens substituits, C60CHR i C60HR, (raons geomètriques, electròniques, energètiques i magnètiques justifiquen el diferent caràcter àcid ente ambdós derivats tenint en compte una sèrie de substituents R amb diferent caràcter electrònic donor/acceptor). Els fluoroful·lerens, C60Fn, i els epoxid ful·lerens, C60On, (anàlisi sistemàtic dels seus patrons d'addició en base a poder justificar la força que els governa han aportat dades complementàries a les poques que existeixen experimentalment al respecte).

Protonation of phenylboronic acid: comparison of G3B3 and G2MP2 methods

G3B3 and G2MP2 calculations using Gaussian 03 have been carried out to investigate the protonation preferences for phenylboronic acid. All nine heavy atoms have been protonated in turn. With both methodologies, the two lowest protonation energies are obtained with the proton located either at the ipso carbon atom or at a hydroxyl oxygen atom. Within the G3B3 formalism, the lowest-energy configuration by 4.3 kcal . mol(-1) is found when the proton is located at the ipso carbon, rather than at the electronegative oxygen atom. In the resulting structure, the phenyl ring has lost a significant amount of aromaticity. By contrast, calculations with G2MP2 show that protonation at the hydroxyl oxygen atom is favored by 7.7 kcal . mol(-1). Calculations using the polarizable continuum model (PCM) solvent method also give preference to protonation at the oxygen atom when water is used as the solvent. The preference for protonation at the ipso carbon found by the more accurate G3B3 method is unexpected and its implications in Suzuki coupling are discussed. (C) 2006 Wiley Periodicals, Inc.

Ligand-centred reactivity of bis(picolyl)amine iridium: sequential deprotonation, oxidation and oxygenation of a "non-innocent" ligand

Treatment of [Ir(bpa)(cod)](+) complex [1](+) with a strong base (e.g., tBuO(-)) led to unexpected double deprotonation to form the anionic [Ir-(bpa-2H)(cod)](-) species [3](-), via the mono-deprotonated neutral amido complex [Ir(bpa-H)(cod)] as an isolable intermediate. A certain degree of aromaticity of the obtained metal-chelate ring may explain the favourable double deprotonation. The rhodium analogue [4](-) was prepared in situ. The new species [M(bpa-2H)(cod)](-) (M = Rh, Ir) are best described as two-electron reduced analogues of the cationic imine complexes [M-I(cod)(Py-CH2-N=CH-Py)](+). One-electron oxidation of [3](-) and [4](-) produced the ligand radical complexes [3]* and [4]*. Oxygenation of [3](-) with O-2 gave the neutral carboxamido complex [Ir(cod)(py-CH2-N-CO-py)] via the ligand radical complex [3]* as a detectable intermediate.

Spin current in the Mobius cyclacene belts

We report on density functional theory studies of the electronic structure and magnetic properties of Mobius-[n]cyclacenes. The geometry of Mobius bands presents a modulation of bond lengths that is needed to accommodate the twist. This modulation takes the form of bond alternation defects analogous to those of solitons in polyacetylene. The ground state of all Mobius bands is a triplet, with a spin density distribution that follows the bond length modulation. A molecular dynamics simulation of the Mobius cyclacene at 300 K shows that the twist travels around the belt inducing a magnetic current. (C) 2009 Elsevier B. V. All rights reserved.

Anodic oxidation of wastewater containing the Reactive Orange 16 Dye using heavily boron-doped diamond electrodes

Boron-doped diamond (BDD) films grown on the titanium substrate were used to study the electrochemical degradation of Reactive Orange (RO) 16 Dye. The films were produced by hot filament chemical vapor deposition (HFCVD) technique using two different boron concentrations. The growth parameters were controlled to obtain heavily doped diamond films. They were named as E1 and E2 electrodes, with acceptor concentrations of 4.0 and 8.0 x 10(21) atoms cm(-3), respectively. The boron levels were evaluated from Mott-Schottky plots also corroborated by Raman`s spectra, which characterized the film quality as well as its physical property. Scanning Electron Microscopy showed well-defined microcrystalline grain morphologies with crystal orientation mixtures of (1 1 1) and (1 00). The electrode efficiencies were studied from the advanced oxidation process (AOP) to degrade electrochemically the Reactive Orange 16 azo-dye (RO16). The results were analyzed by UV/VIS spectroscopy, total organic carbon (TOC) and high-performance liquid chromatography (HPLC) techniques. From UV/VIS spectra the highest doped electrode (E2) showed the best efficiency for both, the aromaticity reduction and the azo group fracture. These tendencies were confirmed by the TOC and chromatographic measurements. Besides, the results showed a direct relationship among the BDD morphology, physical property, and its performance during the degradation process. (C) 2011 Elsevier B.V. All rights reserved.

Índice de aromaticidade baseado na deslocalização, degenerescência e densidade (D3BIA) para acenos e moléculas homoaromáticas

The aromaticity index is an important tool for the investigation of aromatic molecules. This work consists on new applications of the aromaticity index developed by teacher Caio Lima Firme, so-called D3BIA (density, delocalization, degeneracy-based index of aromaticity). It was investigated its correlation with other well-known aromaticity indexes, such as HOMA (harmonic oscillator model of aromaticity), NICS (nucleus independent chemical shielding), PDI (para-delocalization index), magnetic susceptibility (), and energetic factor in the study of aromaticity of acenes and homoaromatic species based on bisnoradamantanyl cage. The density functional theory (DFT) was used for optimization calculations and for obtaining energetic factors associated with aromaticity and indexes HOMA and NICS. From quantum theory of atoms in molecules (QTAIM) it was obtained the indexes D3BIA, PDI and . For acenes, when the over-mentioned indexes were applied it was observed no correlation except for D3BIA and HOMA (R2=0.752). For bisnoradamantenyl dication and its derivatives, it was obtained a good correlation between D3BIA and NICS. Moreover, it was evaluated solely one of the factors used on D3BIA calculation, the delocalization index uniformity (DIU), so as to investigate its possible influence on stability of chemical species. Then, the DIU was compared with the formation Gibbs free energy of some pairs of carbocations, isomers or not, which each pair had small difference in point group symmetry and no difference among other well-known stability factors. The obtained results indicate that DIU is a new stability factor related to carbocations, that is, the more uniform the electron density delocalization, the more stable the is carbocation. The results of this work validate D3BIA and show its importance on the concept of aromaticity, indicating that it can be understood from degeneracy of atoms belonging the aromatic site, the electronic density in the aromatic site and the degree of uniformity of electron delocalization

Development of a simple and versatile ultrafiltration system for the fractionation of aquatic humic substances

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Distribuição de metais e caracterização das constantes de troca entre espécies metálicas e frações húmicas aquáticas de diferentes tamanhos moleculares

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)