Metabolic fingerprint of açaí (Euterpe oleracea) berry pulp using 1H NMR spectroscopy and chemometric analysis.

Portanto, o objetivo deste trabalho foi avaliar a influência de diferentes cultivares e sazonalidade do açaí utilizando a técnica de 1H NMR para criação de perfis de impressão digital associada a métodos quimiométricos, obtidos a partir de frutos geneticamente modificados (cultivada no controle agronômico) e o comércio na cidade de Belém

Fingerprint profile by 1H RMN and chemometric analyses of freeze-dried Açaí berry pulp.

2016

Iogurte simbiótico de açaí (Euterpe edulis Mart.): caracterização físico-química e viabilidade de bactérias láticas e probióticas

Os iogurtes simbióticos, que combinam microrganismos probióticos e substâncias prebióticas, adicionados de polpa de frutas são uma tendência crescente no mercado. O fruto açaí (Euterpe edulis) se destaca pela presença de compostos bioativos, como as antocianinas. Neste contexto, o presente trabalho teve como objetivo caracterizar e avaliar os parâmetros físico-químicos e a viabilidade microbiológica de iogurte simbiótico de açaí enriquecido com inulina e adicionado de cultura probiótica de Bifidobacterium animallis subsp. lactis BB-12. As formulações de iogurte atenderam aos requisitos físico-químicos exigidos pela IN no 46/2007 do MAPA apresentando teor de cinzas de 0,86 % ± 0,10, extrato seco total de 23,18 % ± 2,59, teor de gordura de 4,16 % ± 0,31, acidez de 0,70 % ± 0,05 e pH de 4,45 ± 0,10. Entre as formulações o conteúdo fenólico total variou de 18,17 a 117,84 mg de AGE/100 g, teor de antocianinas de 1,92 a 47,88 mg/100 g e atividade antioxidante de 0,71 a 6,95 μmol Trolox/g, observando-se um aumento de acordo com o aumento do teor de polpa de açaí adicionada. Ao final de 28 dias de armazenamento a 5 °C, observou-se uma redução no teor de antocianinas e da atividade antioxidante. Verificou-se a contribuição positiva da polpa de açaí na viabilidade das bactérias láticas totais, cujas contagens variaram de 4,56 a 7,04 log UFC.g-1 e de B. lactis BB-12 que variou de 3,17 a 6,34 log UFC.g-1, favorecendo a multiplicação dessas bactérias nos iogurtes. Nas formulações com 20 e 25 % de polpa de açaí as contagens das bactérias láticas totais e probiótica mantiveram-se viáveis de acordo com a IN no 46/2007 do MAPA e a Lista de Alegação de Propriedade Funcional (Anvisa), durante os 28 dias de armazenamento a 5 oC. Concluiu-se que a adição de polpa de açaí E. edulis, inulina e B. lactis BB-12 foi tecnologicamente viável na elaboração de iogurte simbiótico de açaí, sendo uma excelente alternativa de diversificação do produto no mercado.

Efeito protetor do açaí (Euterpeoleracea Martius) na promoção da carcinogênese de cólon em ratos Wistar

Pós-graduação em Patologia - FMB

Avaliação da distribuição de cobre associado a compostos de diferentes massas moleculares na polpa de açaí

Neste estudo, cromatografia de exclusão por tamanho (SEC) com detecção por UV e detecção off-line por espectrometria de absorção atômica em forno de grafite (GF AAS) foi usada para investigar a associação de cobre a espécies de alta massa molecular (HMW) e baixa massa molecular (LMW) presentes na polpa de açaí (Euterpe oleracea Mart.). A concentração total de cobre obtida nos digeridos da polpa de açaí foi 10,5 µg g^-1. Cobre foi encontrado associado às frações de HMW e LMW, correspondentes às massas moleculares de 28,7, 2,6 e 0,43 kDa.

Production and evaluation of recycled polymers from açaí fibers

The possibility of recycling and the favorable mechanical properties of the products have encouraged the study and production of thermoplastic composites from natural fibrous waste. Açaí (cabbage palm) fiber, which is removed from the seed, has been slightly investigated, as compared to what is already known about the fruit pulp. In this study, the influence of açaí fiber as an element of reinforcement in recycled everyday usage thermoplastics using simple, low cost methodology was evaluated. Recycled matrixes of high impact polystyrene and polypropylene were molded by hot compression from which the fiber composites were obtained. The FTIR technique showed that the process was efficient in preventing degradation of the açaí fibers. The influence of the fiber on the mechanical behavior of the recycled matrixes was investigated by microscopic images of compression and impact tests. The results showed better impact performance for the fiber combined with the polymeric matrixes.

Desenvolvimento de biossensor baseado em extrato de açaí e sensor biomimético para detecção de hexazinona

Pós-graduação em Química - IQ

Produção de mudas de açaí sob diferentes níveis de depleção de água associada a doses de um polímero hidroabsorvente

O açaizeiro é uma palmeira com potencial comercial valorizado principalmente pela polpa do fruto que possui propriedades químicas benéficas à saúde humana. Os produtores necessitam corresponder ao incremento de demanda e a produção de mudas deve contemplar essa tendência de mercado. O conhecimento a respeito do manejo hídrico de mudas da espécie ainda pode ser ampliado e a utilização de polímero hidroabsorvente (hidrogel) na produção de mudas da espécie surge como uma opção para redução de custos em irrigação associada a uma boa qualidade das plantas. O objetivo deste estudo é gerar informações que correlacionem a influência de doses de hidrogel à produção de mudas de açaizeiro em diferentes regimes hídricos. O experimento foi conduzido no Departamento de Engenharia de Biossistemas da Escola Superior de Agricultura \"Luiz de Queiroz\". O delineamento utilizado foi o de blocos ao acaso sob os seguintes tratamentos, quatro doses de hidrogel (0; 1,0; 2,0; 3,0 g L-1) e três níveis de depleção (0-5; 25; 50% da capacidade de retenção de água do substrato com o polímero) com quatro repetições. O experimento foi conduzido por 9 meses e ao final foram realizadas avaliações biométricas e análises destrutivas para obtenção de valores de massa seca. Para embasamento estatístico dos dados aplicou-se o teste F, em 1 e 5% de probabilidade, análise de regressão polinomial e o teste de Tukey em 5% de probabilidade. O hidrogel aumentou a capacidade de retenção hídrica do substrato e os resultados mostraram que a presença do polímero acrescentou qualidade à muda de forma crescente em função das doses; todavia, doses de 3g L-1 podem acarretar problemas com drenagem devido à perda de eficiência de absorção do polímero. Os níveis de depleção (25 e 50%) afetaram substancialmente, de forma negativa, o desempenho da muda quando comparados ao tratamento de menor depleção (0-5%), demonstrando que a espécie é bastante sensível a regimes com menor disponibilidade hídrica. Não foi observado efeito de interação entre as doses do polímero e os níveis de depleção para a grande maioria das variáveis analisadas, com exceção apenas da área foliar específica (AFE) e da irrigação aplicada (IA). O Kc médio da cultura, para cultivo protegido, apresentou tendência crescente ao longo do experimento. Conclui-se que a melhor dose do polímero é de 2 g L-1 e que o nível de depleção de 0-5% apresentou o melhor desempenho. O Kc determinado mostra tendência de acordo com a fase de desenvolvimento da espécie, variando de 0,76 até 1,41.

Potencial antioxidante de extratos hidroalcoólicos de mirtilo, polpa de açaí e goji berry: efeito na estabilidade oxidativa e sensorial em queijo petit suisse

The consumer interest in healthy foods with high amounts of antioxidants is one of the important factors for reducing the risk of disease and it has encouraged researchers and industry to develop innovative and functional products and ingredients. To that end, the objective of this research was to study the bioactive compounds present in the acai pulp, blueberry and goji berry samples, as well as the phenolic compounds form of extraction using the response surface methodology (RSM), antioxidant and antimicrobial activity of it, identification and quantification of compounds by high-performance liquid chromatography (HPLC) and, at the end, the development of petit suisse cheeses added with freeze-dried extracts of the samples. A 2³ factorial design was used to analyze the solvent effect (ethanol and water), time (30 and 60 min) and temperature (30 °C and 60 °C) on the extraction and determination of total phenolic compounds (TPC) and antioxidant activity (AA). The variables time and temperature had a positive effect on the antioxidant activity (AA) in their highest levels with 60 min and 60 °C respectively. The ethanol solvent 80 % is more efficient in TPC extraction with AA in all arrays. The identification of phenolic compounds performed by HPLC revealed the presence of catechin, epicatechin, rutin, myricetin, chlorogenic acid, coumaric acid and ferulic acid. Regarding the AA the acai pulp showed higher activity in vitro when extracted by 60 °C for 60 min, but none of the three extracts analyzed under these conditions showed antibacterial activity against Staphylococcus aureus and Salmonella bongori in the concentrations tested (95.00 to 2.34 mg/mL. For petit suisse cheeses added with phenolic extract of the samples, the sample containing goji berry achieved greater sensory acceptance among judges (75.67%), second only to the commercial sample used for comparison with 91.56 % of acceptance. In relation to the storage time, the oxidation was evaluated by the level of thiobarbituric acid reactive substances and color analysis. Both analysis were satisfactory, making the extracts addition an alternative to preserve the product properties and give it a high content of bioactive and nutritive compounds.

Microbial Evaluation Of Traumatized Teeth Treated With Triple Antibiotic Paste Or Calcium Hydroxide With 2% Chlorhexidine Gel In Pulp Revascularization.

Revascularization outcome depends on microbial elimination because apical repair will not happen in the presence of infected tissues. This study evaluated the microbial composition of traumatized immature teeth and assessed their reduction during different stages of the revascularization procedures performed with 2 intracanal medicaments. Fifteen patients (7-17 years old) with immature teeth were submitted to the revascularization procedures; they were divided into 2 groups according to the intracanal medicament used: TAP group (n = 7), medicated with a triple antibiotic paste, and CHP group (n = 8), dressed with calcium hydroxide + 2% chlorhexidine gel. Samples were taken before any treatment (S1), after irrigation with 6% NaOCl (S2), after irrigation with 2% chlorhexidine (S3), after intracanal dressing (S4), and after 17% EDTA irrigation (S5). Cultivable bacteria recovered from the 5 stages were counted and identified by means of polymerase chain reaction assay (16S rRNA). Both groups had colony-forming unit counts significantly reduced after S2 (P < .05); however, no significant difference was found between the irrigants (S2 and S3, P = .99). No difference in bacteria counts was found between the intracanal medicaments used (P = .95). The most prevalent bacteria detected were Actinomyces naeslundii (66.67%), followed by Porphyromonas endodontalis, Parvimonas micra, and Fusobacterium nucleatum, which were detected in 33.34% of the root canals. An average of 2.13 species per canal was found, and no statistical correlation was observed between bacterial species and clinical/radiographic features. The microbial profile of infected immature teeth is similar to that of primarily infected permanent teeth. The greatest bacterial reduction was promoted by the irrigation solutions. The revascularization protocols that used the tested intracanal medicaments were efficient in reducing viable bacteria in necrotic immature teeth.

Polyphenol Extraction Optimisation From Ceylon Gooseberry (dovyalis Hebecarpa) Pulp.

Originally from Asia, Dovyalis hebecarpa is a dark purple/red exotic berry now also produced in Brazil. However, no reports were found in the literature about phenolic extraction or characterisation of this berry. In this study we evaluate the extraction optimisation of anthocyanins and total phenolics in D. hebecarpa berries aiming at the development of a simple and mild analytical technique. Multivariate analysis was used to optimise the extraction variables (ethanol:water:acetone solvent proportions, times, and acid concentrations) at different levels. Acetone/water (20/80 v/v) gave the highest anthocyanin extraction yield, but pure water and different proportions of acetone/water or acetone/ethanol/water (with >50% of water) were also effective. Neither acid concentration nor time had a significant effect on extraction efficiency allowing to fix the recommended parameters at the lowest values tested (0.35% formic acid v/v, and 17.6 min). Under optimised conditions, extraction efficiencies were increased by 31.5% and 11% for anthocyanin and total phenolics, respectively as compared to traditional methods that use more solvent and time. Thus, the optimised methodology increased yields being less hazardous and time consuming than traditional methods. Finally, freeze-dried D. hebecarpa showed high content of target phytochemicals (319 mg/100g and 1,421 mg/100g of total anthocyanin and total phenolic content, respectively).

Micromorphology Of The Dental Pulp Is Highly Preserved In Cancer Patients Who Underwent Head And Neck Radiotherapy.

Teeth are often included in the radiation field during head and neck radiotherapy, and recent clinical evidence suggests that dental pulp is negatively affected by the direct effects of radiation, leading to impaired sensitivity of the dental pulp. Therefore, this study aimed to investigate the direct effects of radiation on the microvasculature, innervation, and extracellular matrix of the dental pulp of patients who have undergone head and neck radiotherapy. Twenty-three samples of dental pulp from patients who finished head and neck radiotherapy were analyzed. Samples were histologically processed and stained with hematoxylin-eosin for morphologic evaluation of the microvasculature, innervation, and extracellular matrix. Subsequently, immunohistochemical analysis of proteins related to vascularization (CD34 and smooth muscle actin), innervation (S-100, NCAM/CD56, and neurofilament), and extracellular matrix (vimentin) of the dental pulp was performed. The morphologic study identified preservation of the microvasculature, nerve bundles, and components of the extracellular matrix in all studied samples. The immunohistochemical analysis confirmed the morphologic findings and showed a normal pattern of expression for the studied proteins in all samples. Direct effects of radiotherapy are not able to generate morphologic changes in the microvasculature, innervation, and extracellular matrix components of the dental pulp in head and neck cancer patients.

Determination Of The Phenolic Composition From Brazilian Tropical Fruits By Uhplc-ms/ms.

Although Brazil is the third largest fruit producer in the world, several specimens consumed are not well studied from the chemical viewpoint, especially for quantitative analysis. For this reason and the crescent employment of mass spectrometry (MS) techniques in food science we selected twenty-two phenolic compounds with important biological activities and developed an ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) method using electrospray (ESI) in negative ion mode aiming their quantification in largely consumed Brazilian fruits (açaí-do-Amazonas, acerola, cashew apple, camu-camu, pineapple and taperebá). Multiple reaction monitoring (MRM) was applied and the selection of proper product ions for each transition assured high selectivity. Linearity (0.99580%), precision (CV<20%) and extraction recovery rate (>80%) were satisfactory and showed that the method provides an efficient protocol to analyze phenolic compounds in fruit pulp extracts.

Pulp tissue from primary teeth: new source of stem cells

SHED (stem cells from human exfoliated deciduous teeth) represent a population of postnatal stem cells capable of extensive proliferation and multipotential differentiation. Primary teeth may be an ideal source of postnatal stem cells to regenerate tooth structures and bone, and possibly to treat neural tissue injury or degenerative diseases. SHED are highly proliferative cells derived from an accessible tissue source, and therefore hold potential for providing enough cells for clinical applications. In this review, we describe the current knowledge about dental pulp stem cells and discuss tissue engineering approaches that use SHED to replace irreversibly inflamed or necrotic pulps with a healthy and functionally competent tissue that is capable of forming new dentin.

In vitro study of the pulp chamber temperature rise during light-activated bleaching

This study evaluated in vitro the pulp chamber temperature rise induced by the light-activated dental bleaching technique using different light sources. The root portions of 78 extracted sound human mandibular incisors were sectioned approximately 2 mm below the cementoenamel junction. The root cavities of the crowns were enlarged to facilitate the correct placing of the sensor into the pulp chamber. Half of specimens (n=39) was assigned to receive a 35% hydrogen peroxide gel on the buccal surface and the other halt (n=39) not to receive the bleaching agent. Three groups (n=13) were formed for each condition (bleach or no bleach) according to the use of 3 light sources recommended for dental bleaching: a light-emitting diode (LED)laser system, a LED unit and a conventional halogen light. The light sources were positioned perpendicular to the buccal surface at a distance of 5 mm and activated during 30 s. The differences between the initial and the highest temperature readings for each specimen were obtained, and, from the temperature changes, the means for each specimen and each group were calculated. The values of temperature rise were compared using Kruskal-Wallis test at 1% significance level. Temperature rise varied significantly depending on the light-curing unit, with statistically significant differences (p<0.01) among the groups. When the bleaching agent was not applied, the halogen light induced the highest temperature rise (2.38±0.66ºC). The LED unit produced the lowest temperature increase (0.29±0.13ºC); but there was no significant difference between LED unit and LED-laser system (0.35±0.15ºC) (p>0.01). When the bleaching agent was applied, there were significant differences among groups (p<0.01): halogen light induced the highest temperature rise (1.41±0.64ºC), and LED-laser system the lowest (0.33±0.12ºC); however, there was no difference between LED-laser system and LED unit (0.44±0.11ºC). LED and LED-laser system did not differ significantly from each other regardless the temperature rise occurred with or without bleaching agent application. It may be concluded that during light-activated tooth bleaching, with or without the bleaching agent, halogen light promoted higher pulp chamber temperature rise than LED unit and LED-laser system. The tested light-curing units provided increases in the pulp chamber temperature that were compatible with pulpal health.