Glossary for air pollution control of industrial coating operations : (with graphical aids for rapid estimation of acceptable compliance alternatives) /

Mode of access: Internet.

Personality and job performance: The mediating roles of leader -member exchange quality and action control

The present investigation examined the relationships among personality (as conceptualized by the Big Five Factors), leader-member exchange (LMX) quality, action control, organizational citizenship behaviors (OCB), and overall job performance (OJP). Two mediator variables were proposed and tested in this study: LMX and Action Control. Two-hundred and seven currently employed regular elementary school classroom teachers provided data during the 2000–2001 academic school year. Teachers provided personality, LMX quality (member or subordinate perspective), action control, job tenure, and demographic data. Nine school administrators (i.e., Principals, Assistant Principals) were the source for supervisor ratings of OCB, OJP, and LMX quality (leader or supervisor perspective). In eight of the nine total schools, teachers completed questionnaires during an after-school teacher gathering; in the remaining school location questionnaires were dropped off, distributed to teachers, and re-collected two weeks later. Results indicated a significant relationship between the OCB scale and overall supervisory ratings of OJP. The relationship among the big five factors of personality and OJP did not reach statistical significance, nor did the relationships among personality and OCB. The data indicated that none of the teacher tenure variables (i.e., teacher, school, or time worked with principal tenure) moderated the personality-OCB relationship nor the personality-OJP relationship. Finally, a review of the correlations among the variables of interest precluded conducting a mediation between personality-performance by OCB, mediation of personality-OCB by action control, and mediation of personality-OCB by LMX. In conclusion, the data reveal that personality was not significantly correlated with supervisory ratings of OJP or significantly related to supervisory ratings of overall OCB. Moreover, LMX quality and action control did not mediate the relationships between Personality-OJP nor the Personality-OCB relationship. Significant relationships were found between disengagement and overall LMX quality and between Initiative and overall LMX quality (both LMX-Teacher perspectives) as well as between personality variables and both Disengagement and Initiative action control variables. Despite the limitations inherent in this study, these latter findings suggest “lessons” for teachers and school administrators alike. ^

Implementation of a Control Loop Experiment in a Network-Based Control System With LonWorks Technology and IP Networks

Considering the increasing popularity of network-based control systems and the huge adoption of IP networks (such as the Internet), this paper studies the influence of network quality of service (QoS) parameters over quality of control parameters. An example of a control loop is implemented using two LonWorks networks (CEA-709.1) interconnected by an emulated IP network, in which important QoS parameters such as delay and delay jitter can be completely controlled. Mathematical definitions are provided according to the literature, and the results of the network-based control loop experiment are presented and discussed.

Effectiveness of case management and post-acute services in older people after hospital discharge

Objective: To evaluate the benefits of coordinating community services through the Post-Acute Care (PAC) program in older patients after discharge from hospital. Design: Prospective multicentre, randomised controlled trial with six months of follow-up with blinded outcome measurement. Setting: Four university-affiliated metropolitan general hospitals in Victoria. Participants: All patients aged 65 years and over who were discharged between August 1998 and October 1999 and required community services after discharge. Interventions: Participants were randomly allocated to receive services of a Post-Acute Care (PAC) coordinator (intervention) versus usual discharge planning (control). Main outcome measures: Comparison of quality of life and carer stress at one-month post-discharge, mortality, hospital readmissions, use of community services and community and hospital costs over the six months post-discharge. Results: 654 patients were randomised, and 598 were included in the analysis (311 in the PAC group and 287 in the control group). There was no difference in mortality between the groups (both 6%), but significantly greater overall quality-of-life scores at one-month follow-up in the PAC group. There was no difference in unplanned readmissions, but PAC patients used significantly fewer hospital bed-days in the six months after discharge (mean, 3.0 days; 95% CI, 2.1-3.9) than control patients (5.2 days; 95% CI, 3.8-6.7). Total costs (including hospitalisation, community services and the intervention) were lower in the PAC than the control group (mean difference, $1545; 95% CI, $11-$3078). Conclusions: The PAC program is beneficial in the transition from hospital to the community in older patients.

Modeling, control and simulation of full-power converter wind turbines equipped with permanent magnet synchronous generator

In this paper, two wind turbines equipped with a permanent magnet synchronous generator (PMSG) and respectively with a two-level or a multilevel converter are simulated in order to access the malfunction transient performance. Three different drive train mass models, respectively, one, two and three mass models, are considered in order to model the bending flexibility of the blades. Moreover, a fractional-order control strategy is studied comparatively to a classical integer-order control strategy. Computer simulations are carried out, and conclusions about the total harmonic distortion (THD) of the electric current injected into the electric grid are in favor of the fractional-order control strategy.

Coordenação e fiscalização de obras na empresa Landway, S.A.

Relatório de Estágio para obtenção do grau de Mestre em Engenharia na Área de Especialização em Edificações

Scalable and efficient data processing in networked control systems

Network control systems (NCSs) are spatially distributed systems in which the communication between sensors, actuators and controllers occurs through a shared band-limited digital communication network. However, the use of a shared communication network, in contrast to using several dedicated independent connections, introduces new challenges which are even more acute in large scale and dense networked control systems. In this paper we investigate a recently introduced technique of gathering information from a dense sensor network to be used in networked control applications. Obtaining efficiently an approximate interpolation of the sensed data is exploited as offering a good tradeoff between accuracy in the measurement of the input signals and the delay to the actuation. These are important aspects to take into account for the quality of control. We introduce a variation to the state-of-the-art algorithms which we prove to perform relatively better because it takes into account the changes over time of the input signal within the process of obtaining an approximate interpolation.

Atividades de direção de obra: uma análise crítica

O presente relatório tem como principal objetivo descrever os trabalhos efetuados durante o período de estágio curricular, realizado na empresa Garcia Garcia, S.A., nomeadamente em serviços de direção de obra. A obra onde se desenrolou o estágio tratou-se de uma empreitada com o propósito de construir novas instalações para uma empresa de transporte de mercadorias. Esta era composta por três edificações e ainda instalações de apoio. Este relatório começa por apresentar uma contextualização do estágio bem como uma descrição da empresa, onde este foi realizado, indicando a sua missão, os produtos e serviços prestados aos clientes e a sua estrutura organizacional e ainda o software utilizado. De seguida contextualiza-se e descreve-se a obra da Brunotir, fundamental para uma melhor perceção de todo o projeto de construção em que se inseriu o estágio. No seguimento do relatório apresenta-se o planeamento e a forma como ele é importante numa construção, bem como esta temática foi abordada ao longo do estágio curricular. Posteriormente são apresentados dois capítulos de relevância, incluindo as várias atividades executadas em obra e controlos desenvolvidos no decorrer da empreitada, nomeadamente o controlo de presenças, custos e da qualidade, ambiente e higiene e segurança. Tendo por base estes dois últimos capítulos, exibe-se um outro capítulo que contém uma análise critica, de algumas das tarefas realizadas em obra com o intuito de comparar o que foi feito relativamente com a teoria que foi adquirida ao longo dos anos de estudo e uma pesquisa realizada para o efeito. Por fim, elaboram-se algumas considerações acerca da experiência vivida e da informação absorvida durante o período de estágio, bem como o que foi alcançado tendo em conta os objetivos propostos para o desenvolvimento do estágio.

Certificação ISO 9001 e Gestão de Recursos Humanos: precedentes e consequentes: estudo de caso das Unidades de Serviços Certificadas da Universidade do Minho

Dissertação de mestrado em Gestão de Recursos Humanos

On AUV control architecture

This paper surveys control architectures proposed in the literature and describes a control architecture that is being developed for a semi-autonomous underwater vehicle for intervention missions (SAUVIM) at the University of Hawaii. Conceived as hybrid, this architecture has been organized in three layers: planning, control and execution. The mission is planned with a sequence of subgoals. Each subgoal has a related task supervisor responsible for arranging a set of pre-programmed task modules in order to achieve the subgoal. Task modules are the key concept of the architecture. They are the main building blocks and can be dynamically re-arranged by the task supervisor. In our architecture, deliberation takes place at the planning layer while reaction is dealt through the parallel execution of the task modules. Hence, the system presents both a hierarchical and an heterarchical decomposition, being able to show a predictable response while keeping rapid reactivity to the dynamic environment

Raskaita teräsrakenteita valmistavan tilauskonepajan tuotannon kehittäminen

Diplomityössä tarkastellaan raskaita teräsrakenteita valmistavan tilauskonepajan tuotannon kehittämiskohteita. Tuotannon kehittämisellä halutaan nopeuttaa tuotannon läpimenoaikoja, vähentää laatukustannuksia ja parantaa yrityksen tiedonkulkua. Näillä toimenpiteillä pyritään vaikuttamaan yrityksen kilpailukykyyn, jolloin se voi nousta suomalaisessa toimittajaverkostossa korkeammalle portaalle. Työn teoriaosassa paneudutaan tuottavuus- ja laatuajatteluun hitsaavassa konepajassa. Samalla esitellään eräitä konepajoissa tyypillisimmin käytettyjä laatustandardeja, joita ovat: SFS-EN ISO 9001, SFS-EN ISO 3834 ja SFS-EN 1090. Lisäksi teoriaosiossa on kerrottu erilaisista tuotannonohjausjärjestelmistä ja layout-teorioista. Tämän diplomityön kohdeyritys on Karjalan Konepaja Oy. Yrityksen nykytilanteen kartoittamiseksi suoritettiin useita haastatteluita sekä laadittiin koko organisaatiota koskeva kysely. Tilauskonepajan haasteena ovat alati muuttuvat tilaukset. Tilauskonepajan tuotannon kehittäminen tulee aloittaa sopivien tuotannontehokkuutta mittaavien mittareiden määrittämisellä. Usein kapasiteetti ja tuottavuus kuvastavat parhaiten työvaiheiden tehokkuutta. Mittareiden tarkoitus on auttaa konepajaa löytämään ne tuotannon pullonkaulat, joista yrityksen kehittäminen tulisi aloittaa. Lean-filosofian avulla tulee kehittää tuotannosta hitaimmin suoriutuvia työvaiheita. Tarkoituksena on poistaa valmistusketjusta sellaiset työvaiheet, jotka eivät anna tuotteelle lisäarvoa. Lisäksi työpisteiden layout kannattaa kyseenalaistaa aika ajoin, sillä jo pienilläkin muutoksilla voidaan saada parannuksia työpisteiden tuottavuuteen ja kapasiteettiin.

On AUV control architecture

This paper surveys control architectures proposed in the literature and describes a control architecture that is being developed for a semi-autonomous underwater vehicle for intervention missions (SAUVIM) at the University of Hawaii. Conceived as hybrid, this architecture has been organized in three layers: planning, control and execution. The mission is planned with a sequence of subgoals. Each subgoal has a related task supervisor responsible for arranging a set of pre-programmed task modules in order to achieve the subgoal. Task modules are the key concept of the architecture. They are the main building blocks and can be dynamically re-arranged by the task supervisor. In our architecture, deliberation takes place at the planning layer while reaction is dealt through the parallel execution of the task modules. Hence, the system presents both a hierarchical and an heterarchical decomposition, being able to show a predictable response while keeping rapid reactivity to the dynamic environment

El Outsourcing en la dinámica de sistemas hacia mercados extranjeros

Este trabajo recopila literatura académica relevante sobre estrategias de entrada y metodologías para la toma de decisión sobre la contratación de servicios de Outsourcing para el caso de empresas que planean expandirse hacia mercados extranjeros. La manera en que una empresa planifica su entrada a un mercado extranjero, y realiza la consideración y evaluación de información relevante y el diseño de la estrategia, determina el éxito o no de la misma. De otro lado, las metodologías consideradas se concentran en el nivel estratégico de la pirámide organizacional. Se parte de métodos simples para llegar a aquellos basados en la Teoría de Decisión Multicriterio, tanto individuales como híbridos. Finalmente, se presenta la Dinámica de Sistemas como herramienta valiosa en el proceso, por cuanto puede combinarse con métodos multicriterio.

Ferramentas da qualidade na colheita mecanizada de cana-de-açúcar

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Co-simulation tools for networked control systems: revision and utilization

Networked control systems (NCSs) are distributed control systems in which the sensors, actuators, and controllers are physically separated and connected through an industrial network. The main challenge related to the development of NCSs is the degenerative effects caused by the inclusion of this communication network in the closed loop control. In order to mitigate these effects, co-simulation tools for NCS have been developed to study the network influence in the NCS. This paper presents a revision about co-simulation tools for NCS and the application of two of these tools for the design and evaluation of NCSs. The TrueTime and Jitterbug tools were used together to evaluate the main configuration parameter that affects the performance of CAN-based NCS and to verify the NCS quality of control under various timing conditions including different transmission period of messages and network delays. Therefore, the simulation results led to the conclusion that despite the transmission period of messages is the most significant factor among the analyzed in the design of NCS, its influence is related to the kind of system with greater effects in NCSs with fast dynamics.