The effective management of geological risk in long-term production scheduling of open pit mines

Investment in mining projects, like most business investment, is susceptible to risk and uncertainty. The ability to effectively identify, assess and manage risk may enable strategic investments to be sheltered and operations to perform closer to their potential. In mining, geological uncertainty is seen as the major contributor to not meeting project expectations. The need to assess and manage geological risk for project valuation and decision-making translates to the need to assess and manage risk in any pertinent parameter of open pit design and production scheduling. This is achieved by taking geological uncertainty into account in the mine optimisation process. This thesis develops methods that enable geological uncertainty to be effectively modelled and the resulting risk in long-term production scheduling to be quantified and managed. One of the main accomplishments of this thesis is the development of a new, risk-based method for the optimisation of long-term production scheduling. In addition to maximising economic returns, the new method minimises the risk of deviating from production forecasts, given the understanding of the orebody. This ability represents a major advance in the risk management of open pit mining.

Identification and control of occupational risks in a Sao Paulo metropolitan region quarry

Crushed stone mining is the third largest mining economy in Brazil, where almost half is produced in the Sao Paulo metropolitan region. The segment registers the highest number of accidents among the extractive industries, which justifies the concern with workers` health and safety, and the importance of controlling occupational hazards. Since 2002, the NR-22 Standard (NR-22: Occupational Health and Safety in Mining) makes compulsory the elaboration of a Risk Management Program that identifies risks and establishes control measures. Considering the crushed stone mining industry importance to the state, this paper evaluates and discusses the risks identified in unit operations during the production process of crushed stone in an open pit mine in order to propose control measures for the development of the Risk Management Program. Although this study refers to a specific quarry, it can be applied to other mines from the same sector since some considerations are made regarding differences in manufacturing processes. The research was based on the identification of the main risks associated with drilling, blasting, load & haulage, crushing and screening through field measurements of some hazardous agents, together with company reports. The results contributed to the choice of the appropriate control measures for the improvement Of workers` health and safety conditions.

Modelagem de dados de entrada para simulação estocástica de lavra

Mine simulation depends on data that is both coherent and representative of the mining operation. This paper describes a methodology for modeling operational data which has been developed for mine simulation. The methodology has been applied to a case study of an open-pit mine, where the cycle times of the truck fleet have been modeled for mine simulation purposes. The results obtained have shown that once the operational data has been treated using the proposed methodology, the system variables have proven to be adherent to theoretical distributions. The research indicated the need jar tracking the origin of data inconsistencies through the development of a process to manage inconsistent data from the mining operation.

Hydrochemistry, mineralogy and sulphur isotope geochemistry of acid mine drainage at the Mt Morgan mine environment, Queensland, Australia

Mineralogical, hydrochemical and S isotope data were used to constrain hydrogeochemical processes that produce acid mine drainage from sulfidic waste at the historic Mount Morgan Au–Cu mine, and the factors controlling the concentration of SO4 and environmentally hazardous metals in the nearby Dee River in Queensland, Australia. Some highly contaminated acid waters, with metal contents up to hundreds of orders of magnitude greater than the Australia–New Zealand environmental standards, by-pass the water management system at the site and drain into the adjacent Dee River. Mine drainage precipitates at Mt. Morgan were classified into 4 major groups and were identified as hydrous sulfates and hydroxides of Fe and Al with various contents of other metals. These minerals contain adsorbed or mineralogically bound metals that are released into the water system after rainfall events. Sulfate in open pit water and collection sumps generally has a narrow range of S isotope compositions (δ34S = 1.8–3.7‰) that is comparable to the orebody sulfides and makes S isotopes useful for tracing SO4 back to its source. The higher δ34S values for No. 2 Mill Diesel sump may be attributed to a difference in the source. Dissolved SO4 in the river above the mine influence and 20 km downstream show distinctive heavier isotope compositions (δ34S = 5.4–6.8‰). The Dee River downstream of the mine is enriched in 34S (δ34S = 2.8–5.4‰) compared with mine drainage possibly as a result of bacterial SO4 reduction in the weir pools, and in the water bodies within the river channel. The SO4 and metals attenuate downstream by a combination of dilution with the receiving waters, SO4 reduction, and the precipitation of Fe and Al sulfates and hydroxides. It is suggested here that in subtropical Queensland, with distinct wet and dry seasons, temporary reducing environments in the river play an important role in S isotope systematics

Estudo da influência da fragmentação no custo da produção de agregados graníticos

Hoje em dia algumas das principais preocupações que se tem na exploração a céu aberto, são a diminuição de custos e a máxima rentabilidade dos equipamentos. São dois aspectos que estão interligados uma vez que a rentabilização dos equipamentos tem como resultado directo a diminuição dos custos de todas as operações inerentes à exploração a céu aberto e, consequentemente, a diminuição dos custos finais de produção. É por essa lógica de pensamento que se procurou perceber e compreender o funcionamento e a rentabilidade dos equipamentos em função dos diferentes estados de fracturação do maciço rochoso. Este estudo foi realizado numa pedreira a norte de Portugal e complementa outros estudos já realizados, com o objectivo de definir características do diagrama de fogo que assegurem a maior rentabilidade da referida exploração. O estudo baseia-se em determinar os rendimentos da pá carregadora calculando os tempos de ciclo, isto é, o tempo que a pá demorou a carregar, a movimentar e a descarregar o material desmontado dos vários rebentamentos. Calculou-se o rendimento do martelo demolidor na fragmentação de grandes blocos, que não entrariam directamente no britador primário, o qual também foi alvo de estudo, nomeadamente, no que diz respeito aos tempos de encravamento e de britagem, onde se tentou correlacionar esses tempos com os vários desmontes e estimou-se o consumo de energia do britador primário utilizando a equação de Bond. Por fim, realizou-se um estudo comparativo do consumo energético entre as várias fases da exploração a céu aberto. Foram realizados levantamentos geológico-geotécnicos de superfícies de descontinuidades recorrendo à técnica de amostragem linear nas superfícies do maciço rochoso para perceber o tipo de fragmentação e orientação do mesmo.

Significado regional dos depósitos neogénicos continentais da área de Vila de Rei (Portugal Central)

In the Vila de Rei area (Central Portugal) the continental deposits of the Lower Tagus Tertiary Basin lay upon the pediment of the Portuguese Central Chain. Three conglomerate units are recorded from the base upwards, separated by regional or basinal unconformities; Conglomerados de Rio de Moinhos (RM); Conglomerados de Serra de Almeirim (SA) and Conglomerados de Vila de Rei (VR). The first two units (RM and SA) have been sites of gold exploitation in huge open pit mines probably during Roman colonisation times. The contact of this units, on the Paleozoic basement or on the Paleogene unit Grés de Monsanto, is unconform, defining in both limits a large nondepositional and/or erosional hiatus. Those conglomerates seal the sedimentation of the Lower Tagus Tertiary Basin along its northern border. Taking into account the significance assigned to their basinal unconformity limits, the uplift of the Portuguese Central Chain, and the fact of this continental units yielded no fossils with chronostratigraphic significance, they have been considered ranging from Upper Miocene to the beginning of the Quaternary. Finally, a lithostraligraphic equivalence with the Neogenic units of the Bierzo and Duerna basins (NW of the Iberian Peninsula), where exploitations from Roman times are also evident, is presented.

Magmatic fluids in the Breccia-hosted epithermal Au-Ag deposit of Rosia Montana, Romania

The breccia-hosted epithermal Au-Ag deposit of Rosia Montana is located 7 kin northeast of Abrud, in the northern part of the South Apuseni Mountains, Romania. Estimated total reserves of 214.91 million metric toils (Mt) of ore at 1.46 g/t An and 6.9 g/t Ag (10.1 Moz of An and 47.6 Moz of Ag) make Rosia Montana one of the largest gold deposits in Europe. At this location, Miocene calc-alkaline magmatic and hydrothermal activity was associated with local extensional tectonics within a strike-slip regime related to the indentation of the Adriatic microplate into the European plate during the Carpathian orogenesis. The host rocks of the magmatic complex consist of pre-Mesozoic metamorphosed continental crust covered by Cretaceous turbiditic sediment (flysch). Magmatic activity at Rosia Montana and its surroundings occurred in several pulses and lasted about 7 m.y, Rosia Montana is a breccia-hosted epithermal system related to strong phreatomagmatic activity due to the shallow emplacement of the Montana dacite. The Montana dacite intruded Miocene volcaniclastic material (volcaniclastic breccias) and crops out at Cetate and Carnic Hills. Current mining is focused primarily on the Cetate open pit, which was mapped in detail, leading to the recognition of three distinct breccia bodies: the dacite breccia with a dominantly hydrothermal matrix, the gray polymict breccia with a greater proportion of sand-sized matrix support, and the black polymict breccia, which reached to the surface, contains carbonized tree trunks and has a dominantly barren elastic matrix. The hydrothermal alteration is pervasive. Adularia alteration with a phyllic overprint is ubiquitous; silicification and argillic alteration occur locally. Mineralization consists of quartz, adularia, carbonates (commonly Mn-rich), pyrite, Fe-poor sphalerite, galena, chalcopyrite, tetrahedrite, and native gold and occurs as disseminations, as well as in veins and filling vugs within the Montana dacite and the different breccias. The age of mineralization (12.85 +/- 0.07 Ma) was determined by Ar-40- Ar-39 dating on hydrothermal adularia crystals from vugs in the dacite breccia in the Cetate open pit. Microthermometric measurements of fluid inclusions in quartz phenocrysts from the Montana dacite revealed two fluid types that are absent from the hydrothermal breccia and must have been trapped at depth prior to dacite dome emplacement: brine inclusions (32-55 -wt % NaCl equiv, homogenizing at T-h > 460 degrees C) and intermediate density fluids (4.9-15.6 wt % NaCl equiv, T, between 345 degrees-430 degrees C). Secondary aqueous fluid inclusion assemblages in the phenocrysts have salinities of 0.2 to 2.2 wt percent NaCl equiv and T-h of 200 degrees to 280 degrees C. Fluid inclusion assemblages in hydrothermal quartz from breccias and veins have salinities of 0.2 to 3.4 wt percent NaCl equiv and T-h, from 200 degrees to 270 degrees C. The oxygen isotope composition of several zones of an ore-related epithermal quartz crystal indicate a very constant delta O-18 of 4.5 to 5.0 per mil for the mineralizing fluid, despite significant salinity and temperature variation over time. Following microthermometry, selected fluid inclusion assemblages were analyzed by laser ablation-inductively coupled-plasma mass spectrometry (LA-ICMS). Despite systematic differences in salinity between phenocryst-hosted fluids trapped at depth and fluids from quartz in the epithermal breccias, all fluids have overlapping major and trace cation ratios, including identical Na/K/Rb/Sr/Cs/Ba. Consistent with the constant near-magmatic oxygen isotope composition of the hydrothermal fluids, these data strongly indicate a common magmatic component of these chemically conservative solutes in all fluids. Cu, Pb, Zn, and Mn show variations in concentration relative to the relatively non-reactive alkalis, reflecting the precipitation of sulfide minerals together with An in the epithermal breccia, and possibly of Cu in an inferred subjacent porphyry environment. The magmatic-hydrothermal processes responsible for epithermal Au-Ag mineralization at Rosia Montana are, however, not directly related to the formation of the spatially associated porphyry Cu-Au deposit of Rosia Poieni, which occurred lout 3 m.y. later.

Mineral zoning and geochemistry of epithermal polymetallic Zn-Pb-Ag-Cu-Bi mineralization at Cerro de Pasco, Peru

The large Cerro de Pasco Cordilleran base metal deposit in central Peru is located on the eastern margin of a middle Miocene diatreme-dome complex and comprises two mineralization stages. The first stage consists of a large pyrite-quartz body replacing Lower Mesozoic Pucara carbonate rocks and, to a lesser extent, diatreme breccia. This body is composed of pyrite with pyrrhotite inclusions, quartz, and black and red chalcedony (containing hypogene hematite). At the contact with the pyrite-quartz body, the diatreme breccia is altered to pyrite-quartz-sericite-pyrite. This body was, in part, replaced by pipelike pyrrhotite bodies zoned outward to carbonate-replacement Zn-Pb ores hearing Fe-rich sphalerite (up to 24 mol % Fes). The second mineralization stage is partly superimposed on the first and consists of zoned east-west-trending Cu-Ag-(Au-Zn-Pb) enargite-pyrite veins hosted in the diatreme breccia in the western part of the deposit and well-zoned Zn-Pb-(Bi-Ag-Cu) carbonate-replacement orebodies; in both cases, sphalerite is Fe poor and the inner parts of the orebodies show typically advanced argillic alteration assemblages, including aluminum phosphate Sulfate (APS) minerals. The zoned enargite-pyrite veins display mineral zoning, from a core of enargite-pyrite +/- alunite with traces of Au, through an intermediate zone of tennantite, chalcopyrite, and Bi minerals to a poorly developed Outer zone hearing sphalerite-galena +/- kaolinite. The carbonate-hosted replacement ores are controlled along N 35 degrees E, N 90 degrees E, N 120 degrees E, and N 170 degrees E faults. They form well-zoned upward-flaring pipelike orebodies with a core of famatinite-pyrite and alunite, an intermediate zone with tetrahedrite-pyrite, chalcopyrite, matildite, cuprobismutite, emplectite, and other Bi minerals accompanied by APS minerals, kaolinite, and dickite, and an outer zone composed of Fe-poor sphalerite (in the range of 0.05-3.5 mol % Fes) and galena. The outermost zone consists of hematite, magnetite, and Fe-Mn-Zn-Ca-Mg carbonates. Most of the second-stage carbonate-replacement orebodies plunge between 25 degrees and 60 degrees to the west, suggesting that the hydrothermal fluids ascended from deeper levels and that no lateral feeding from the veins to the carbonate-replacement orebodies took place. In the Venencocha and Santa Rosa areas, located 2.5 km northwest of the Cerro de Pasco open pit and in the southern part of the deposit, respectively, advanced argillic altered dacitic domes and oxidized veins with advanced argillic alteration halos occur. The latter veins are possibly the oxidized equivalent of the second-stage enargite-pyrite veins located in the western part of the deposit. The alteration assemblage quartz-muscovite-pyrite associated with the pyrite-quartz body suggests that the first stage precipitated at slightly, acidic fin. The sulfide mineral assemblages define an evolutionary path close to the pyrite-pyrrhotite boundary and are characteristic of low-sulfidation states; they suggest that the oxidizing slightly acidic hydrothermal fluid was buffered by phyllite, shale, and carbonate host rock. However, the presence in the pyrite-quartz body of hematite within quartz suggests that, locally, the fluids were less buffered by the host rock. The mineral assemblages of the second mineralization stage are characteristic of high- to intermediate-sulfidation states. High-sulfidation states and oxidizing conditions were achieved and maintained in the cores of the second-stage orebodies, even in those replacing carbonate rocks. The observation that, in places, second-stage mineral assemblages are found in the inner and outer zones is explained in terms of the hydrothermal fluid advancing and waning. Microthermometric data from fluid inclusions in quartz indicate that the different ores of the first mineralization stage formed at similar temperatures and moderate salinities (200 degrees-275 degrees C and 0.2-6.8 wt % NaCl equiv in the pyrite-quartz body; 192 degrees-250 degrees C and 1.1-4.3 wt % NaCl equiv in the pyrrhotite bodies; and 183 degrees-212 degrees C and 3.2-4.0 wt % NaCl equiv in the Zn-Pb ores). These values are similar to those obtained for fluid inclusions in quartz and sphalerite from the second-stage ores (187 degrees-293 degrees C and 0.2-5.2 wt % NaCl equiv in the enargite-pyrite veins: 178 degrees-265 degrees C and 0.2-7.5 wt % NaCl equiv in quartz of carbonate-replacement orebodies; 168 degrees-999 degrees C and 3-11.8 wt % NaCl equiv in sphalerite of carbonate-replacement orebodies; and 245 degrees-261 degrees C and 3.2-7.7 wt % NaCl equiv in quartz from Venencocha). Oxygen and hydrogen isotope compositions oil kaolinite from carbonate-replacement orebodies (delta(18)O = 5.3-11.5%o, delta D = -82 to -114%o) and on alunite from the Venencocha and Santa Rosa areas (delta(18)O = 1.9-6.9%o, delta D = -56 to -73%o). Oxygen isotope compositions of quartz from the first and second stages have 6180 values from 9.1 to 1.7.8 per mil. Calculated fluids in equilibrium with kaolinite have delta(18)O values of 2.0 to 8.2 and delta D values of -69 to -97 per mil; values in equilibrium with alunite are -1.4 to -6.4 and -62 to -79 per mil. Sulfur isotope compositions of sulfides from both stages have a narrow range of delta(34)S values, between -3.7 and +4.2 per mil; values for sulfates from the second stage are between 4.2 and 31.2 per mil. These results define two mixing trends for the ore-forming fluids. The first trend reflects mixing between a moderately saline (similar to 10 wt % NaCl equiv) magmatic end member that had degassed (as indicated by the low delta D values) and meteoric water. The second mixing indicates condensation of magmatic vapor with HCl and SO(2) into meteoric water, which formed alunite. The hydrothermal system at Cerro de Pasco was emplaced at a shallow depth (similar to 500 m) in the epithermal and upper part of a porphyry environment. The similar temperatures and salinities obtained for the first stage and second stages, together with the stable isotope data, indicate that both stages are linked and represent successive stages of epithermal polymetallic mineralization in the upper part of a porphyry system.

Condiciones de trabajo y morbilidad percibidas entre mineros de carbón en Guachetá, Colombia

Introducción: En Colombia la investigación sobre condiciones de trabajo y salud en minería carbonífera es escasa y no considera la percepción de la población expuesta y sus comportamientos frente a los riesgos inherentes. Objetivo: Determinar la asociación entre las condiciones de trabajo y morbilidad percibidas entre trabajadores de minas de carbón en Guachetá, Cundinamarca. Materiales y métodos: Se realizó un estudio transversal con 154 trabajadores seleccionados aleatoriamente del total registrado en la alcaldía municipal. Se indagó sobre características sociodemográficas, condiciones de trabajo y salud en las minas. Se estimaron prevalencias de los trastornos respiratorios, osteomusculares y auditivos, y se exploraron las asociaciones entre algunas condiciones de trabajo y los eventos con prevalencia superior a 30% de forma bivariada y múltiple, con regresiones Poisson con varianza robusta. Resultados: Los trabajadores fueron en su mayoría hombres, con edades entre 18 y 77 años de edad. Los problemas de salud más frecuentemente reportados fueron dolor lumbar (46,10%), dolor del miembro superior (40,26%), dolor del miembro inferior (34,42%), trastornos respiratorios (17,53%) y problemas auditivos (13,64%). Existen diferencias importantes en la percepción dependiendo de la antigüedad laboral y las condiciones subterráneas o no del trabajo. Conclusión: Los riesgos más reconocidos por los trabajadores son los relacionados con trastornos osteomusculares, al parecer por ser más evidentes en su cotidianidad. Las acciones en salud ocupacional podrán considerar estos hallazgos en sus planes de prevención de la enfermedad en las minas del carbón colombianas.

Accidentes de trabajo y enfermedades laborales de los mineros de socavón en Boyacá, Cundinamarca y Norte de Santander

RESUMEN. Introducción: la minería a cielo abierto y la subterránea, presentan altas cifras de lesiones asociadas a esta industria a nivel internacional. Países como Australia, algunos de Europa y Estados Unidos tienen avances en seguridad minera, tanto en lesiones fatales como no mortales; sin embargo, otros países no muestran el mismo desarrollo, ejemplo de ello son algunos países de África, China y países de Suramérica. Colombia, muestra un paupérrimo avance en seguridad minera, agravado por ausencia de registros de calidad para establecer políticas en salud y seguridad minera. Objetivo: describir los accidentes de trabajo (AT) y enfermedades laborales (EL) de dichos trabajadores y sus relaciones con tiempo de exposición y oficio. Metodología: estudio transversal con 476 trabajadores del el sector de minería. Se indago sobre los AT y EL de los mineros de socavón en los departamentos de Boyacá, Cundinamarca y Norte de Santander. Se realizó análisis estadístico con medidas de tendencia central y dispersión, estimación de prevalencia de AT y EL y pruebas de asociación Chi-cuadrado para identificar factores relacionados con las variables. Para las estimaciones de parámetros se empleó un nivel de confianza del 95% y las pruebas de asociación un nivel α de 0,05. Resultados: La edad en años de los trabajadores varió entre 20 y 76 años con una media general de 43 ± 10. La antigüedad laboral en años varió entre 10 y 57 años con una media general de 19,3±9,1. Los trabajadores con mayor promedio de antigüedad laboral fueron los de Cundinamarca (valor_p< 0.000). La incidencia de AT fue de 52,3%, IC (95% 47,7% – 56,9%) en los tres departamentos, siendo mayor en Boyacá. Las regiones anatómicas más comprometidas fueron miembros inferiores 32,2%, miembros superiores 26,9%, la cabeza y espalda con 9,9% respectivamente. La enfermedad laboral que más se diagnosticó, fue hernia de disco. Conclusiones: Este estudio muestra la magnitud del problema de la accidentalidad observada en los tres departamentos; la distribución de los accidentes en el sector minero, según la región anatómica, el tipo de lesión y su agente causal, esto será insumo para ayudar a la elaboración de políticas públicas, a nivel empresarial, de las Administradoras de Riesgos Laborales (ARL) y otros actores del Sistema de gestión de la Seguridad y Salud en el Trabajo (SGSST). Palabras clave: minería, exposición profesional, accidentes de trabajo, enfermedad laboral, Colombia.

Caracterização e gênese de solos construídos após mineração de carvão na mina Boa Vista, município de Minas do Leão, RS

A mineração de carvão em lavra a céu aberto provoca a mistura dos materiais sobrejacentes ao carvão e que são, posteriormente, utilizados no preenchimento das cavas mineradas. O processo de construção dos solos e a mistura podem ocasionar problemas ambientais pelas alterações quimicas e fisicas provocadas nos solos construidos. A fimde comparar solos construidos de diferentes idades, caracterizou-se a coluna geológica. o ~Io natural originale solos construidos de 2 anos e de 24 anos da mina de carvão Boa Vista, no Municípiode Minas do Leão, RS. A descrição morfológicado perfil do solo e as análises quimicas e fisicas demonstram que os solos construidos apresentam sérias limitações físicas, impedindo o desenvolvimento normal da vegetação. Ademais. diferenças quimicas entre os perfis de diferentes idades originam-se principalmente da utilização de materiais geológicos e processos de construção distintos, do que pelos processos pedogenéticos. Quanto à evolução temporal dos solos construidos, observou-se que está fortemente caracterizada pela intemperização acido-sulfatada, intensificando-se na sub-área mais antiga. O potencial de acidificação e o potencial de neutralização determínados na coluna geológica indicam a existência de camadas com alto potencial gerador de Drenagem Ácida de Minas, recomendando-se o cuidado na deposição final destas camadas. Os resultados deste estudo indicam que as propriedades químicas e fisicas determinadas nos solos construidos servem como indicadores para o monitoramentode áreas construídas,visando a prevenção de danos ambientais.

Revegetation and Soil Management Effects on Chemical Properties of a Saprolite Resulting from Deep Soil Removal

During the building of a hydroelectrical power plant at Ilha Solteira in the Parana River (Brazil), materials of a highly weathered soil Oxisol were extracted from a depth between 5 and 8 m for engineering works. This resulted in an abandoned depression area. The topsoil was not salvaged and the open pit was not backfilled, and as result vegetation hardly or not at all recovered. on the residual saprolite materials, an experimental field was established to assess different soil rehabilitation treatments. Field experiments were initiated in 1992. After soil tillage, two different crops and three different liming strategies were compared, giving six combinations. In addition, two uncropped control treatments, tilled and no-tilled, were established so that a total of eight treatments were assessed. The experimental design consisted of four randomized experimental blocks, which included a total of 32 plots with a plot area of 100 m(2). This experiment was used to study the effectiveness of the soil-reclamation treatments after a 9-year period. Soil samples were taken at three different depths (0-10, 10-20, and 20-40 cm), and they were analyzed routinely for pH, organic-matter content, and cation exchange capacity (CEC). Revegetation of the abandoned saprolite material increased soil organic-matter content and cation exchange capacity (CEC), and to some extent small differences between treatments were evidenced. Exchangeable calcium (Ca) and magnesium (Mg) recovered faster than organic-matter content. A significant linear relationship was found between organic-matter content and CEC, suggesting continued addition of organic material will further approach the value of these parameters to those levels corresponding to natural soils under "Cerrado" vegetation.

Radioactivity distribution in some Permian sediments from the Irati and Corumbatal formations of the Parana basin, southeastern Brazil

in the city of Limeira, southeastern Brazil, an important exposure of Permian sediments of the Parana basin was revealed by an open pit mine that exploits limestone for production of soil correction compounds and raw materials for the ceramic industry. The radioactivity of these sediments was investigated in some detail and the results provided a general view of the vertical distributions of uranium, thorium and potassium concentrations and of the element ratios U/K, U/Th and Th/K. In general, the concentrations of the main natural radioactive elements are low, with uranium being enriched in some limestone and shale levels. In addition the results showed that the U-238 series is in radioactive disequilibrium in many of the analyzed samples. Although the origin of the observed disequilibrium has not been investigated, the results suggest that it is due to weathering processes and water interaction with the rock matrix. (C) 2003 Elsevier Ltd. All rights reserved.