Using petri nets to specify and execute missions for autonomous underwater vehicles

This paper presents the design and implementation of a mission control system (MCS) for an autonomous underwater vehicle (AUV) based on Petri nets. In the proposed approach the Petri nets are used to specify as well as to execute the desired autonomous vehicle mission. The mission is easily described using an imperative programming language called mission control language (MCL) that formally describes the mission execution thread. A mission control language compiler (MCL-C) able to automatically translate the MCL into a Petri net is described and a real-time Petri net player that allows to execute the resulting Petri net onboard an AUV are also presented

Petri nets teaching in the Mechatronics Engineering course

The current solutions implanted in the majority of manufacturing systems controlled by PLCs were developed through the language of programming known as ladder. Such a language, easily learned and handled, shows to be efficient whenever the system to be implanted does not demand greater complexity of analyses. Bigger systems, presenting characteristics in which resource compartments, parallelism and synchronizing among processes are more frequent, demand the adoption of solutions differentiation. This article presents a teaching experience and practical application of Petri nets in a Mechatronics Engineering graduation course. Copyright © 2007 IFAC.

Petri nets and autonomous systems: A case study

This work presents the Petri net-based modeling of an autonomous robot's navigation system used for the application of supplies in agriculture. The model was developed theoretically and implemented through the CPNTools software. It simulates the behavior of the robot, capturing environmental characteristics by means of sensors, making appropriate decisions, and forwarding them to the corresponding actuators. By exciting the model using CPNTools it is possible to simulate situations that the robot might undergo, without the need to expose it to real potentially dangerous situations. ©2009 IEEE.

Digital system design process automation using place/transition petri nets

The constant increase in digital systems complexity definitely demands the automation of the corresponding synthesis process. This paper presents a computational environment designed to produce both software and hardware implementations of a system. The tool for code generation has been named ACG8051. As for the hardware synthesis there has been produced a larger environment consisting of four programs, namely: PIPE2TAB, AGPS, TABELA, and TAB2VHDL. ACG8051 and PIPE2TAB use place/transition net descriptions from PIPE as inputs. ACG8051 is aimed at generating assembly code for the 8051 micro-controller. PIPE2TAB produces a tabular version of a Mealy type finite state machine of the system, its output is fed into AGPS that is used for state allocation. The resulting digital system is then input to TABELA, which minimizes control functions and outputs of the digital system. Finally, the output generated by TABELA is fed to TAB2VHDL that produces a VHDL description of the system at the register transfer level. Thus, we present here a set of tools designed to take a high-level description of a digital system, represented by a place/transition net, and produces as output both an assembly code that can be immediately run on an 8051 micro-controller, and a VHDL description that can be used to directly implement the hardware parts either on an FPGA or as an ASIC.

Systematic Process for Building a Fault Diagnoser Based on Petri Nets Applied to a Helicopter

This work presents a systematic process for building a Fault Diagnoser (FD), based on Petri Nets (PNs) which has been applied to a small helicopter. This novel tool is able to detect both intermittent and permanent faults. The work carried out is discussed from theoretical and practical point of view. The procedure begins with a division of the whole system into subsystems, which are the devices that have to be modeled by using PN, considering both the normal and fault operations. Subsequently, the models are integrated into a global Petri Net diagnoser (PND) that is able to monitor a whole helicopter and show critical variables to the operator in order to determine the UAV health, preventing accidents in this manner. A Data Acquisition System (DAQ) has been designed for collecting data during the flights and feeding PN diagnoser with them. Several real flights (nominal or under failure) have been carried out to perform the diagnoser setup and verify its performance. A summary of the validation results obtained during real flight tests is also included. An extensive use of this tool will improve preventive maintenance protocols for UAVs (especially helicopters) and allow establishing recommendations in regulations

Quantitative modeling of stochastic systems in molecular biology by using stochastic Petri nets

An integrated understanding of molecular and developmental biology must consider the large number of molecular species involved and the low concentrations of many species in vivo. Quantitative stochastic models of molecular interaction networks can be expressed as stochastic Petri nets (SPNs), a mathematical formalism developed in computer science. Existing software can be used to define molecular interaction networks as SPNs and solve such models for the probability distributions of molecular species. This approach allows biologists to focus on the content of models and their interpretation, rather than their implementation. The standardized format of SPNs also facilitates the replication, extension, and transfer of models between researchers. A simple chemical system is presented to demonstrate the link between stochastic models of molecular interactions and SPNs. The approach is illustrated with examples of models of genetic and biochemical phenomena where the UltraSAN package is used to present results from numerical analysis and the outcome of simulations.

Extração de casos de teste utilizando Redes de Petri hierárquicas e validação de resultados utilizando OWL.

Este trabalho propõe dois métodos para teste de sistemas de software: o primeiro extrai ideias de teste de um modelo desenvolvido em rede de Petri hierárquica e o segundo valida os resultados após a realização dos testes utilizando um modelo em OWL-S. Estes processos aumentam a qualidade do sistema desenvolvido ao reduzir o risco de uma cobertura insuficiente ou teste incompleto de uma funcionalidade. A primeira técnica apresentada consiste de cinco etapas: i) avaliação do sistema e identificação dos módulos e entidades separáveis, ii) levantamento dos estados e transições, iii) modelagem do sistema (bottom-up), iv) validação do modelo criado avaliando o fluxo de cada funcionalidade e v) extração dos casos de teste usando uma das três coberturas de teste apresentada. O segundo método deve ser aplicado após a realização dos testes e possui cinco passos: i) primeiro constrói-se um modelo em OWL (Web Ontology Language) do sistema contendo todas as informações significativas sobre as regras de negócio da aplicação, identificando as classes, propriedades e axiomas que o regem; ii) em seguida o status inicial antes da execução é representado no modelo através da inserção das instâncias (indivíduos) presentes; iii) após a execução dos casos de testes, a situação do modelo deve ser atualizada inserindo (sem apagar as instâncias já existentes) as instâncias que representam a nova situação da aplicação; iv) próximo passo consiste em utilizar um reasoner para fazer as inferências do modelo OWL verificando se o modelo mantém a consistência, ou seja, se não existem erros na aplicação; v) finalmente, as instâncias do status inicial são comparadas com as instâncias do status final, verificando se os elementos foram alterados, criados ou apagados corretamente. O processo proposto é indicado principalmente para testes funcionais de caixa-preta, mas pode ser facilmente adaptado para testes em caixa branca. Obtiveram-se casos de testes semelhantes aos que seriam obtidos em uma análise manual mantendo a mesma cobertura do sistema. A validação provou-se condizente com os resultados esperados, bem como o modelo ontológico mostrouse bem fácil e intuitivo para aplicar manutenções.

Automatic Translation of MSC Diagrams into Petri Nets

Development-engineers use in their work languages intended for software or hardware systems design, and test engineers utilize languages effective in verification, analysis of the systems properties and testing. Automatic interfaces between languages of these kinds are necessary in order to avoid ambiguous understanding of specification of models of the systems and inconsistencies in the initial requirements for the systems development. Algorithm of automatic translation of MSC (Message Sequence Chart) diagrams compliant with MSC’2000 standard into Petri Nets is suggested in this paper. Each input MSC diagram is translated into Petri Net (PN), obtained PNs are sequentially composed in order to synthesize a whole system in one final combined PN. The principle of such composition is defined through the basic element of MSC language — conditions. While translating reference table is developed for maintenance of consistent coordination between the input system’s descriptions in MSC language and in PN format. This table is necessary to present the results of analysis and verification on PN in suitable for the development-engineer format of MSC diagrams. The proof of algorithm correctness is based on the use of process algebra ACP. The most significant feature of the given algorithm is the way of handling of conditions. The direction for future work is the development of integral, partially or completely automated technological process, which will allow designing system, testing and verifying its various properties in the one frame.

Extended Algorithm for Translation of MSC-diagrams into Petri Nets

The article presents an algorithm for translation the system, described by MSC document into Petri Net modulo strong bisimulation. Obtained net can be later used for determining various systems' properties. Example of correction error in original system with using if described algorithm presented.

From Hardware Processes to asynchronous circuits via petri nets: An Application to Arbiter Design

International audience

Diagnostic goal driven modelling and simulation of multiscale process systems

A systematic goal-driven top-down modelling methodology is proposed that is capable of developing a multiscale model of a process system for given diagnostic purposes. The diagnostic goal-set and the symptoms are extracted from HAZOP analysis results, where the possible actions to be performed in a fault situation are also described. The multiscale dynamic model is realized in the form of a hierarchical coloured Petri net by using a novel substitution place-transition pair. Multiscale simulation that focuses automatically on the fault areas is used to predict the effect of the proposed preventive actions. The notions and procedures are illustrated on some simple case studies including a heat exchanger network and a more complex wet granulation process.

An evolutionary approach to the use of Petri net based models: from parallel controllers to HW/SW co-design

"A workshop within the 19th International Conference on Applications and Theory of Petri Nets - ICATPN’1998"

Specification of Supervisory Control Systems for Ventricular Assist Devices

One of the most important recent improvements in cardiology is the use of ventricular assist devices (VADs) to help patients with severe heart diseases, especially when they are indicated to heart transplantation. The Institute Dante Pazzanese of Cardiology has been developing an implantable centrifugal blood pump that will be able to help a sick human heart to keep blood flow and pressure at physiological levels. This device will be used as a totally or partially implantable VAD. Therefore, an improvement on device performance is important for the betterment of the level of interaction with patient`s behavior or conditions. But some failures may occur if the device`s pumping control does not follow the changes in patient`s behavior or conditions. The VAD control system must consider tolerance to faults and have a dynamic adaptation according to patient`s cardiovascular system changes, and also must attend to changes in patient conditions, behavior, or comportments. This work proposes an application of the mechatronic approach to this class of devices based on advanced techniques for control, instrumentation, and automation to define a method for developing a hierarchical supervisory control system that is able to perform VAD control dynamically, automatically, and securely. For this methodology, we used concepts based on Bayesian network for patients` diagnoses, Petri nets to generate a VAD control algorithm, and Safety Instrumented Systems to ensure VAD system security. Applying these concepts, a VAD control system is being built for method effectiveness confirmation.

Automatic synthesis of VHDL Hardware Components from IOPT Petri Net models

Conferência: 39th Annual Conference of the IEEE Industrial-Electronics-Society (IECON), Vienna, Austria, Nov 10-14, 2013