975 resultados para Concentration of capital
Resumo:
This paper reports investigation of Na2O and ZnO modified borovanadate glasses in the highly modified regime of compositions. These glasses have been prepared by microwave route. Ultraviolet (UV) and visible, infrared (IR), Magic Angle Spinning Nuclear Magnetic Resonance (MAS NMR) and Electron Paramagnetic Resonance (EPR) spectroscopies have been used to characterize the speciation in the glasses. Together with the variation of properties such as molar volume and glass transition temperatures, spectroscopic data indicate that at high levels of modification, ZnO tends to behave like network former. It is proposed that the observed variation of all the properties can be reasonably well understood with a structural model. The model considers that the modification and speciation in glasses are strongly determined by the hierarchy of group electronegativities. Further, it is proposed that the width of the transitions of glasses obtained under same condition reflects the fragility of the glasses. An empirical expression has been suggested to quantify fragility on the basis of width of the transition regions. (C) 2012 Elsevier Ltd. All rights reserved.
Resumo:
We present the study involving the dependence of carrier concentration of InN films, grown on GaN templates using the plasma assisted molecular beam epitaxy system, on growth temperature. The influence of InN carrier concentration on the electrical transport behavior of InN/GaN heterostructure based Schottky junctions is also discussed. The optical absorption edge of InN film was found to be strongly dependent on carrier concentration, and was described by Kane's k.p model, with non-parabolic dispersion relation for carrier in the conduction band. The position of the Fermi-level in InN films was modulated by the carrier concentration in the InN films. The barrier height of the heterojunctions as estimated from I-V characteristic was also found to be dependent on the carrier concentration of InN. (C) 2012 Elsevier Ltd. All rights reserved.
Resumo:
In this paper we investigate the effect of core-shell structure of Sodium Alginate based hydrogel beads and their size on certain activation threshold concentration of water for applications in swelling and pH sensing. This type of hydrogel experiences diffusive pressure due to transport of certain free charges across its interface with a solvent or electrolyte. This process is essentially a dynamic equilibrium of the electric force field, stress in the polymeric network with cage like structure and molecular diffusion including phase transformation due to pressure imbalance between the hydrogel and its surroundings. The effect of pH of the solvant on the swelling rate of these beads has been studied experimentally. A mathematical model of the swelling process has been developed by considering Nernst-Planck equation representing the migration of mobile ions and Er ions, Poisson equation representing the equilibrium of the electric field and mechanical field equation representing swelling of the gel. An attempt has been made to predict the experimentally observed phenomena using these numerical simulations. It is observed experimentally that certain minimum concentration called activation threshold concentration of the water molecules must be present in the hydrogel in order to activate the swelling process. For the required activation threshold concentration of water in the beads, the pH induced change in the rate of swelling is also investigated. This effect is analyzed for various different core-shell structures of the beads.
Resumo:
The localization and dispersion quality of as received NH2 terminated multiwall carbon nanotubes (MWNT-I) and ethylene diamine (EDA) functionalized MWNTs in melt mixed blends of polycarbonate ( PC) and poly(styrene-co-acrylonitrile) (SAN) were assessed in this study using rheo-electrical and electromagnetic interference (EMI) shielding measurements. In order to improve the dispersion quality and also to selectively localize MWNTs in the PC phase of the blends, EDA was grafted onto MWNTs by two different strategies like diazonium reaction of the para-substituted benzene ring of MWNTs with EDA ( referred to as MWNT-II) and acylation of carboxyl functionalized MWNTs with thionyl chloride ( referred to as MWNT-III). By this approach we could systematically vary the concentration of NH2 functional groups on the surface of MWNTs at a fixed concentration (1 wt%) in PC/SAN blends. XPS was carried to evaluate the % concentration of N in different MWNTs and was observed to be highest for MWNT-III manifesting in a large surface coverage of EDA on the surface of MWNTs. Viscoelastic properties and melt electrical conductivities were measured to assess the dispersion quality of MWNTs using a rheo-electrical set-up both in the quiescent as well as under steady shear conditions. Rheological properties revealed chain scission of PC in the presence of MWNT-III which is due to specific interactions between EDA and PC leading to smaller PC grafts on the surface of MWNTs. The observed viscoelastic properties in the blends were further correlated with the phase morphologies under quiescent and annealed conditions. Electromagnetic interference (EMI) shielding effectiveness in X and K-u-band frequencies were measured to explore these composites for EMI shielding applications. Interestingly, MWNT-II showed the highest electrical conductivity and EMI shielding in the blends.
Resumo:
A unique strategy was adopted to achieve an ultra-low electrical percolation threshold of multiwall carbon nanotubes (MWNTs) (0.25 wt%) in a classical partially miscible blend of poly-alpha-methylstyrene-co-acrylonitrile and poly(methyl methacrylate) (P alpha MSAN/PMMA), with a lower critical solution temperature. The polymer blend nanocomposite was prepared by standard melt-mixing followed by annealing above the phase separation temperature. In a two-step mixing protocol, MWNTs were initially melt-mixed with a random PS-r-PMMA copolymer and subsequently diluted with 85/15 P alpha MSAN/PMMA blends in the next mixing step. Mediated by the PS-r-PMMA, the MWNTs were mostly localized at the interface and bridged the PMMA droplets. This strategy led to enhanced electromagnetic interference (EMI) shielding effectiveness at 0.25 wt% MWNTs through multiple scattering from MWNT-covered droplets, as compared to the blends without the copolymer, which were transparent to electromagnetic radiation.
Resumo:
The maximum stress concentration factor in brittle materials with a high concentration of cavities is obtained. The interaction between the nearest cavities, in addition to the far field interactions, is taken into account to evaluate the strength distribution based on the statistical analysis of the nearest distance distribution. Through this investigation, it is found that the interaction between the nearest neighbors is much more important than the far field interactions, and one has to consider it in calculating the strength of brittle materials even if the volume fraction of cavities it contains is small. The other important conclusion is that the maximum stress concentration factor has a wide scattered distribution.
Resumo:
ENGLISH: This study shows how the catch and effort statistics, from 1951 to 1956, of the fishery for yellowfin tuna, Neothunnus macropterus, in the Eastern Tropical Pacific Ocean, have been used to compute: (i) two indices of average population density; (ii) an index of concentration of effort on areas of greatest density of available yellowfin. These three indices were then used to determine: (i) quarterly and annual variation in each of them; (ii) the relationship between the two indices of density; (iii) the relationship of each of the indices to the number of exploited one-degree rectangles. To remove extreme sampling variation at low levels of effort, the data from all one-degree rectangles subjected to less than five logged days' fishing in a quarter were eliminated, and the computations were repeated for comparison with those of the original data. SPANISH: Este estudio da a conocer cómo las estadísticas sobre la pesca y el esfuerzo de pesca de la pesquería del atún aleta amarilla, Neothunnus macropterus, en el Océano Pacífico Oriental Tropical, durante 1951 a 1956, han servido para computar: (i) dos índices del promedio de la densidad de la población; (ií) un índice de la concentración del esfuerzo en las áreas de mayor densidad de atún aleta amarilla disponible. Estos tres índices han sido luego usados para determinar: (i) la variación trimestral y anual en cada uno de ellos; (ií) la relación entre los dos índices de densidad; (iii) la relación de cada uno de los índices con el número de rectángulos de un grado explotados. Para evitar la extrema variación del muestreo a bajos niveles de esfuerzo, se eliminaron los datos de todos los rectángulos de un grado sujetos a menos de cinco días de actividad pesquera durante un trimestre según los registros de los cuadernos de bitácora, y las computaciones se repitieron para compararlas con las de los datos originales.
Resumo:
ENGLISH: In a previous Bulletin of this Commission, Griffiths (1960) discussed two indices of population density and an index of concentration of fishing effort of bait boats for yellowfin tuna in the Eastern Tropical Pacific for the 1951-1956 period. Yellowfin and skipjack tuna occur in the same general fishing areas and many of the commercial catches are composed of a mixture of the two species. It is desirable, therefore, to extend the investigation to skipjack and to the two species combined. SPANISH:En un Boletín anterior de esta Comisión, Griffiths (1960) se refiere a dos índices de la densidad de la población y a un índice de la concentración del esfuerzo de pesca de los barcos de carnada sobre el atún aleta amarilla en el Pacífico Oriental Tropical, correspondientes al período 1951-1956. Los atunes aleta amarilla y barrilete se encuentran en las mismas áreas generales de pesca y muchas de las pescas comerciales están compuestas de una mezcla de las dos especies. Es deseable, por lo tanto, ampliar la investigación en lo que se refiere al barrilete y a las dos especies combinadas.
Resumo:
A presente dissertação analisa como a lógica do capital penetrou na saúde como resultado da necessidade de expansão das forças produtivas. O que se pretende confirmar é o processo no qual o capital, ao metamorfosear sua necessidade em necessidade universal, amplia suas bases de produção e faz parecer que, para alcançar níveis melhores de saúde, toda área precise depender de injeções cada vez mais vultuosas de capitais. Essa dependência, em suma ideológica, produz e cria os meios para a reprodução de suas contradições em todos os ramos da área de saúde. É nessa esteira que o capital portador de juros passa a determinar os processos de produção e reprodução na área, com o objetivo de alcançar lucros exorbitantes, ao ponto de sentenciar centenas de milhares de vidas a incerteza, a dor e até a morte do corpo e da alma pela falta de assistência das políticas de saúde. Problematiza-se os projetos em disputa na saúde, ressaltando o projeto contra-hegemônico da Reforma Sanitária elaborado nos anos 1970. Aborda-se a saúde por sua relevância e necessidade de transpô-la ao patamar de valor humanitário, a partir de uma inquietação tangencial, aos processos vivenciados no cotidiano entre aqueles que trabalham, para possibilitar o acesso a uma multidão cada vez maior e mais diversificada que requer, enquanto trabalhadores, direitos aos produtos e aos serviços de saúde. Tomando a referência do complexo industrial da saúde, no contexto de hegemonia do capital financeiro, evidencia-se sua consolidação na ampliação da acumulação e concentração frente à histórica necessidade do capital de assentar-se em bases materiais e de articular-se ao capital portador de juros. Na atualidade esse processo sustenta este modo de produção e garante sua produção/reprodução por meio da invenção crescente de capitais fictícios. No Brasil, ao passo que as políticas sociais são privatizadas, a concentração de capitais, os planos de investimento e crescimento das empresas por participação acionária são financiados com recursos públicos comprovados por meio dos programas do Banco Nacional de Desenvolvimento Social.
Resumo:
Sublethal DimilinR (insecticide) concentration significantly decreased the percentage survival of larval R. harrisii . This decrease was marked at low salinities, when it may have become toxic. This was true for both 25 and 30 C. Duration of larval development did not seem to be affected by sublethal DimilinR concentrations even in extremely low or high salinities. High temperature, however, shortened the time of development. No anatomical abnormality was observed. These findings are only tentative as more replicates of the experiments are needed before definite conclusions can be reached. It will be desirable to work with more salinity-temperature combinations to get a complete picture of sublethal effects under different environmental conditions.
Resumo:
Concentration of toxic metals namely Zn, Cu, Fe, Cd and Pb in the marine benthos off Bombay Coast, Maharashtra (India) was estimated. Maximum concentration of Zn, Fe and Pb was from the organisms of Thana Creek. Higher concentration of Cu was encountered in benthic organisms off Versova. Cd was detected in some organisms and was maximum in the organisms collected from Mahim.
Resumo:
The present study reports the effect of artificial seawater on oxygen uptake and opercular frequency in an Indian major carp, Labeo rohita. Whereas a control fish of 7.34 g average body weight consumed 1.538 ml O sub(2.) hˉ¹, the 24h and 96h exposed fish of the same body weight consumed 1.07 4 and 0.897 ml O sub(2.) hˉ¹, respectively. The oxygen uptake per unit body weight under controlled condition was 0.219 ml. gˉ¹. hˉ¹, whereas in 24h and 96h exposed fish, it was 0.152 and 0.124 ml. gˉ¹, hˉ¹, respectively. The change in opercular movement in 24h exposed fish was 7.67% higher, whereas in 96h exposed fish, it was 22.43% higher as compared to the control one. All changes are highly significant (p<0.001).
Resumo:
Samples of tannin-containing preservatives used by fishermen in India for treating cotton nets were collected and qualitative and quantitative characterisation of the tannins made. The concentrations of different tannins required to impart optimum periods of preservation to the net were worked out and found to be 2% in 8 out of 10 materials studied.
Resumo:
Blanching is an important operation in the shrimp canning process, in order to bring down the moisture content of the product to the required level, to allow the proteins to coagulate and to give proper texture, shape and characteristic pink colour to the meat. It has been observed that among other factors responsible for fluctuations in the drained weight in the canned prawns, concentration of brine used for blanching and the duration of blanching are important (Varma, Chaudhury and Pillai 1961). The papers gives details of experiments