Estágio na empresa SPECMAN para a prática de técnicas de controlo da condição

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Avaliação de fiabilidade de sistemas elétricos e de automação em instalações de frio industrial

Dissertação para a obtenção do grau de Mestre em Engenharia Electrotécnica Ramo de Energia/Automação e Eletrónica Industrial

A high level e-maintenance architecture to support on-site teams

Emergent architectures and paradigms targeting reconfigurable manufacturing systems increasingly rely on intelligent modules to maximize the robustness and responsiveness of modern installations. Although intelligent behaviour significantly minimizes the occurrence of faults and breakdowns it does not exclude them nor can prevent equipment’s normal wear. Adequate maintenance is fundamental to extend equipments’ life cycle. It is of major importance the ability of each intelligent device to take an active role in maintenance support. Further this paradigm shift towards “embedded intelligence”, supported by cross platform technologies, induces relevant organizational and functional changes on local maintenance teams. On the one hand, the possibility of outsourcing maintenance activities, with the warranty of a timely response, through the use of pervasive networking technologies and, on the other hand, the optimization of local maintenance staff are some examples of how IT is changing the scenario in maintenance. The concept of e-maintenance is, in this context, emerging as a new discipline with defined socio-economic challenges. This paper proposes a high level maintenance architecture supporting maintenance teams’ management and offering contextualized operational support. All the functionalities hosted by the architecture are offered to the remaining system as network services. Any intelligent module, implementing the services’ interface, can report diagnostic, prognostic and maintenance recommendations that enable the core of the platform to decide on the best course of action.

Previsão de avarias em transformadores de potência através da análise de ensaios físico-químicos

Os Transformadores de potência são máquinas de elevada importância ao nível dos Sistemas Elétricos de Energia (SEE) uma vez que são estas máquinas que possibilitam a interligação dos diferentes níveis de tensão da rede e a transmissão de energia elétrica em Corrente Alternada (CA). Geralmente, estas máquinas são de grandes dimensões e de elevado nível de complexidade construtiva. Caracterizam-se por possuírem períodos de vida útil bastante elevados (vinte a trinta anos) e preços elevados, o que conduz a um nível de exigência de fiabilidade muito elevada, uma vez que não e viável a existência de muitos equipamentos de reserva nos SEE. Com o objetivo de tentar maximizar o período de vida útil dos transformadores de potência e a sua fiabilidade, tenta-se, cada vez mais, implementar conceitos de manutenção preventiva a este tipo de máquinas. No entanto, a gestão da sua vida útil e extremamente complexa na medida em que, estas máquinas têm vários componentes cruciais e suscetiveis de originar falhas e, quase todos eles, encontram-se no interior de uma cuba. Desta forma, não e possível obter uma imagem do seu estado, em tempo real, sem colocar o transformador fora de serviço, algo que acarreta custos elevados. Por este motivo, desenvolveu-se uma técnica que permite obter uma indicação do estado do transformador, em tempo real, sem o retirar de serviço, colhendo amostras do óleo isolante e procedendo a sua análise físico-química e Analise Gases Dissolvidos (DGA). As análises aos óleos isolantes tem vindo a adquirir uma preponderância muito elevada no diagnóstico de falhas e na analise do estado de conservação destes equipamentos tendo-se desenvolvido regras para interpretação dos parâmetros dos óleos com carácter normativo. Considerando o conhecimento relativo a interpretação dos ensaios físico-químicos e DGA ao oleol, e possível desenvolver ferramentas capazes de otimizar essas mesmas interpretações e aplicar esse conhecimento no sentido de prever a sua evolução, assim como o surgimento de possíveis falhas em transformadores, para assim otimizar os processos de manutenção. Neste campo as Redes Neuronais Artificiais (RNAs) têm um papel fundamental

Estudo de Avarias em Compressores de Ar

As instalações de ar comprimido são uma constante em quase todo o tipo de indústria, já que o ar comprimido assume cada vez mais importância como fonte de energia para a movimentação de dispositivos com cargas moderadas ou médias. O uso cada vez mais frequente da pneumática por via da automação de sistemas e processos de fabrico, é outro fator que tem incrementado fortemente o uso de instalações de ar comprimido. A utilização de ar comprimido tem subjacente um ou mais compressores, responsáveis por captar o ar e criar as condições necessárias de pressão na rede que vai abastecer uma qualquer instalação industrial, ou mesmo comercial, como no caso dos serviços de reparação automóvel, entre outras. Desta forma, cria-se uma forte dependência em torno desta fonte de energia, sendo a avaria do compressor um fator extremamente limitativo do processo produtivo ou dos serviços a prestar. As empresas fabricantes de compressores, cientes deste facto, têm primado pela fiabilidade. No entanto, os utilizadores nem sempre criam as condições ideais para o funcionamento desses compressores, conduzindo a problemas de funcionamento. Neste trabalho pretendeu-se elaborar um estudo que permitisse identificar quais as causas que estão por detrás das avarias mais frequentes de alguns dos modelos mais vendidos pela Ingersoll-Rand no nosso país, através da Comingersoll, analisando as mesmas e tentando encontrar soluções que evitassem essas avarias. O estudo permitiu dissecar as avarias registadas em cinco diferentes modelos nos últimos anos, identificar possíveis causas, perceber a frequência com que ocorrem e sugerir melhorias que pudessem minimizar a ocorrência dessas mesmas avarias.

Controlo de qualidade e inspeção visual por imagem: definição de uma aplicação para registo de alterações e avaliação de desempenho

Dissertação de mestrado em Engenharia e Gestão da Qualidade

Statistics on obesity, physical activity and diet: England, January 2008

This statistical report from the Information Centre presents a range of information on obesity, physical activity and diet, drawn together from a variety of sources. The publication also summarises government plans and targets in this area, as well as providing sources of further information and links to relevant documents and key sources. There are several notable additions to this, The Information Centre's second report on obesity, physical activity and diet. Waist circumference analysis has been included where possible to reflect the importance of using this measurement in conjunction with Body Mass Index (BMI) in order to identify those at increased risk of health problems associated with obesity. More regional data is presented with a greater number of tables providing government office region and Strategic Health Authority breakdowns. Where possible information at a more local level has been reported on.

Estudio de clasificación de los proyectos informáticos y del establecimiento de su estructura de descomposición del trabajo (EDT)

L'objectiu d'aquest treball és establir un criteri de classificació dels projectes informàtics, trobar-ne els diferents tipus i desenvolupar les estructures de descomposició del treball (EDT) per a cada tipus. Aquest criteri s'orientarà a fixar les màximes diferències entre tipus. Una vegada se'ls hagi localitzat, s'establiran les EDT corresponents a cada tipus, centrant el desenvolupament de cada estructura a reflectir les diferències entre les distintes descomposicions.

Probabilistic models to assist maintenance of multiple instruments

The paper discusses maintenance challenges of organisations with a huge number of devices and proposes the use of probabilistic models to assist monitoring and maintenance planning. The proposal assumes connectivity of instruments to report relevant features for monitoring. Also, the existence of enough historical registers with diagnosed breakdowns is required to make probabilistic models reliable and useful for predictive maintenance strategies based on them. Regular Markov models based on estimated failure and repair rates are proposed to calculate the availability of the instruments and Dynamic Bayesian Networks are proposed to model cause-effect relationships to trigger predictive maintenance services based on the influence between observed features and previously documented diagnostics

On the receiver pays principle

This paper extends the theory of network competition betweentelecommunications operators by allowing receivers to derive a surplusfrom receiving calls (call externality) and to affect the volume ofcommunications by hanging up (receiver sovereignty). We investigate theextent to which receiver charges can lead to an internalization of thecalling externality. When the receiver charge and the termination(access) charge are both regulated, there exists an e±cient equilibrium.Effciency requires a termination discount. When reception charges aremarket determined, it is optimal for each operator to set the prices foremission and reception at their off-net costs. For an appropriately chosentermination charge, the symmetric equilibrium is again effcient. Lastly,we show that network-based price discrimination creates strong incentivesfor connectivity breakdowns, even between equal networks.

La sociolinguistique en psychiatrie de liaison: un certain regard [Sociolinguistics and liaison psychiatry]

Verbal language is a major tool of medical communication. However, its use can be problematic, namely because the speakers of a given language do not necessarily agree on the meaning of the words they exchange. This phenomenon is usually called linguistic variability. Based on a famous political and legal case and medical examples, we will show how variability is a critical source of misunderstandings and other communicational breakdowns. In addition, we will suggest some strategies which are likely to limit the impact of variability on clinician/patient interaction.

Investigation of the Lane-Wells Road Logger, HR-113, 1966

The Lane-Wells Road Logger was utilized primarily to determine the feasibility of employing such a device for moisture and density control in Iowa highway construction. A secondary objective was the use of the Road Logger to obtain information concerning moisture content and density during and after construction. Correlation studies with conventional test results required a small portion of the lease period. Practically all phases of construction and most materials utilized in base and surface courses were surveyed. Results of this study were good, in general, with the Road Logger indicating dry density slightly higher and the moisture content slightly lower than conventional results in most instances. Economic feasibility seemed to pose the greatest problem for the acceptance of the Road Logger as a standard compaction control device. It would appear from the findings of this study that probably only large projects, or several smaller contracts tested simultaneously, could justify the expense of the Logger. A total of about 128 miles were surveyed with the Logger during the lease period. Approximately 16 days of downtime due to minor breakdowns were recorded. Inclement weather forcing construction delays resulted in several idle days in which the Logger's full capabilities were not realized.

Oops! Another medication error : a literature review of contributing factors and methods to prevent medication errors

The purpose of this bachelor's thesis was to chart scientific research articles to present contributing factors to medication errors done by nurses in a hospital setting, and introduce methods to prevent medication errors. Additionally, international and Finnish research was combined and findings were reflected in relation to the Finnish health care system. Literature review was conducted out of 23 scientific articles. Data was searched systematically from CINAHL, MEDIC and MEDLINE databases, and also manually. Literature was analysed and the findings combined using inductive content analysis. Findings revealed that both organisational and individual factors contributed to medication errors. High workload, communication breakdowns, unsuitable working environment, distractions and interruptions, and similar medication products were identified as organisational factors. Individual factors included nurses' inability to follow protocol, inadequate knowledge of medications and personal qualities of the nurse. Developing and improving the physical environment, error reporting, and medication management protocols were emphasised as methods to prevent medication errors. Investing to the staff's competence and well-being was also identified as a prevention method. The number of Finnish articles was small, and therefore the applicability of the findings to Finland is difficult to assess. However, the findings seem to fit to the Finnish health care system relatively well. Further research is needed to identify those factors that contribute to medication errors in Finland. This is a necessity for the development of methods to prevent medication errors that fit in to the Finnish health care system.

Kartonkikoneen tuotannonsuunnittelu jalostuslähtöisesti

Työn tarkoituksena oli selvittää monipope-menetelmän taustaa, menetelmän karkea tekninen toteutus, sovellettavuus kartonkikone KA1:n tuotantoon ja menetelmän mukanaan tuomat edut ja haitat, sekä ratkaisumallit mahdollisten tuotannollisten häiriötilanteiden ratkaisemista varten. Työssä selvitettiin myös tuotannon, tuotannon-suunnittelun, varastoinnin, asiakaspalvelun ja tuottavuuden tehostamista monipope-menetelmän avulla, sekä tuotannonsuunnittelun jalostuslähtöisyyden korostamista. Työn kirjallisuusosassa käsitellään lyhyesti toiminnanohjauksen, tuotannonsuunnittelun ja materiaalinhallinnan perusteiden lisäksi tuotannon-suunnittelussa hyödynnettävän tietojärjestelmän toimintaa ja kartonkitehtaan tuotantoprosessi kartonkikoneiden ja muovipäällystyskoneiden osalta. Kokeellisessa osassa perehdyttiin tuotannon ja tuotannonsuunnittelun tämän hetkiseen tilaan, selvitettiin monipope-menetelmän idea ja sen karkea tekninen toteutus ja tutkittiin monipopemenetelmän sovellettavuutta pohjautuen toteutuneeseen tuotantoon ja nykyisiin tuotannon rajoitteisiin. Välivarastointikapasiteetin rajoittaminen johti päällystyskapasiteetin uudelleen organisoimisen ja nykyisen kapasiteetin riittävyyden selvittämiseen koetrimmitysten avulla. Lisäksi selvitettiin uuden menetelmän avulla saavutettavaa tuotannon nousua erityisesti jatkojalostuksen osalta. Monipope-menetelmän sovellettavuustutkimuksissa havaittiin uuden menetelmän tuovan mukanaan lukuisia etuja ja säästöjä muun muassa materiaalikulujen alentumisen ja vähentyneiden työvaiheiden kautta. Kartonkikone KA1:n tuotteiden jatkojalostuksen tuotannon nousuksi määritettiin noin 2 %:ia ja tämän lisäksi uusi menetelmä yksinkertaistaisi ja helpottaisi koko kartonkitehtaan rullaliikennettä ja varastojen hallintaa. Menetelmä toisi uusia toimintamalleja KA1:n tuotannon häiriötilanteiden varalle, lisäisi tuotannonsuunnittelun joustavuutta ja helpottaisi myös asiakaspalvelun ja laaduntarkkailun kehittämistä. Tutkimuksen tuloksena voidaan todeta, että monipope-menetelmän tuomat edut ovat kiistattomat. Menetelmän soveltamisen mahdollisuuksia tulisikin miettiä jatkossa investointeja suunnitellessa, jotta menetelmän toteuttaminen kohtuullisin investointikustannuksin nykyisten tuotantoedellytysten lisäksi olisi mahdollista.

Effects of maintenance management procedures in sugarcane mechanic harvesting system equipment

ABSTRACT The aim of this study was to evaluate the effects of modifying the maintenance programming of equipment used in sugarcane mechanical harvesting, by transferring actions that can be planned to periods when machines are inactive due to meal breaks and other working shift transitions stoppages. A simulation model was developed to represent the maintenance procedures of combines, haulouts, and other vehicles used by a harvest team. Scenarios were tested using alternatives for interventions such as refueling, lubrication and harvester blade replacement, enabling strategies to be focused towards better utilization of cutting, loading, and transport (CLT) system equipment. As a result, it was possible to remove one combine and two haulouts, while maintaining current daily production. The maintenance time for harvesters, which refers to corrective maintenance and the transfer of remaining interventions for periods of inactivity, was reduced from 10.0% to 3.5% over the useful period. This study indicates that maintenance management in the sugarcane sector enables the expanded use of equipment, leading to the greater productivity of the CLT system.