Precursor scavenging of resistive grain-boundary phase in 8 mol % ytterbia-stabilized zirconia

The grain-boundary conduction of 8 mol % ytterbia-stabilized zirconia (8YbSZ) was improved markedly by precursor scavenging via the two-stage sintering process. The most significant increase in the grain-boundary conductivity was found when the sample, whose conductivity was higher than that via Al2O3-derived scavenging, was heat-treated at 1250degreesC for greater than or equal to 20 h. The formation of a stable Si-containing phase such as ZrSiO4 during the first-stage heat-treatment was suggested as one probable scavenging route from the optimal heat-treatment temperature (HTT), long duration time (>20 h) at HTT, and the stability of the formed phase up to sintering temperatures (1500degrees C). (C) 2002 The Electrochemical Society.

MASS CONSERVATION ENHANCEMENT OF FREE BOUNDARY FLOWS IN COMPOSITES MANUFACTURING

Undesirable void formation during the injection phase of the liquid composite molding process can be understood as a consequence of the non-uniformity of the flow front progression, caused by the dual porosity of the fiber perform. Therefore the best examination of the void formation physics can be provided by a mesolevel analysis, where the characteristic dimension is given by the fiber tow diameter. In mesolevel analysis, liquid impregnation along two different scales; inside fiber tows and within the spaces between them; must be considered and the coupling between these flow regimes must be addressed. In such case, it is extremely important to account correctly for the surface tension effects, which can be modeled as capillary pressure applied at the flow front. When continues Galerkin method is used, exploiting elements with velocity components and pressure as nodal variables, strong numerical implementation of such boundary conditions leads to ill-posing of the problem, in terms of the weak classical as well as stabilized formulation. As a consequence, there is an error in mass conservation accumulated especially along the free flow front. This article presents a numerical procedure, which was formulated and implemented in the existing Free Boundary Program in order to significantly reduce this error.

Mass Conservation Enhancement of Free Boundary Mesolevel Flows during LCM Processes of Composites Manufacturing

Undesirable void formation during the injection phase of the liquid composite moulding process can be understood as a consequence of the non-uniformity of the flow front progression, caused by the dual porosity of the fibre perform. Therefore the best examination of the void formation physics can be provided by a mesolevel analysis, where the characteristic dimension is given by the fibre tow diameter. In mesolevel analysis, liquid impregnation along two different scales; inside fibre tows and within the open spaces between them; must be considered and the coupling between these flow regimes must be addressed. In such case, it is extremely important to account correctly for the surface tension effects, which can be modelled as capillary pressure applied at the flow front. Numerical implementation of such boundary conditions leads to ill-posing of the problem, in terms of the weak classical as well as stabilized formulation. As a consequence, there is an error in mass conservation accumulated especially along the free flow front. This contribution presents a numerical procedure, which was formulated and implemented in the existing Free Boundary Program in order to significantly reduce this error.

Numerical Method to Predict Void Formation during The Liquid Composite Molding Process

Void formation during the injection phase of the liquid composite molding process can be explained as a consequence of the non-uniformity of the flow front progression. This is due to the dual porosity within the fiber perform (spacing between the fiber tows is much larger than between the fibers within in a tow) and therefore the best explanation can be provided by a mesolevel analysis, where the characteristic dimension is given by the fiber tow diameter of the order of millimeters. In mesolevel analysis, liquid impregnation along two different scales; inside fiber tows and within the open spaces between the fiber tows must be considered and the coupling between the flow regimes must be addressed. In such cases, it is extremely important to account correctly for the surface tension effects, which can be modeled as capillary pressure applied at the flow front. Numerical implementation of such boundary conditions leads to illposing of the problem, in terms of the weak classical as well as stabilized formulation. As a consequence, there is an error in mass conservation accumulated especially along the free flow front. A numerical procedure was formulated and is implemented in an existing Free Boundary Program to reduce this error significantly.

Paleoenvironmental evolution of the Helvetic shallow-water carbonate platform near the Barremian-Aptian boundary, and its relationship with paleoceanographic and paleoclimatic change in the Tethys

Abstract:During my doctoral research, I focused on deciphering the interactions between sea-level and climate change during the Late Barremian-Early Aptian, their expression in the Tethys basin and in the Helvetic carbonate platform. The research highlights are summarized here in three points: In the Helvetic Alps, the transition between the Lower Schrattenkalk (Upper Barremian) and the Rawil Member (Lowermost Aptian) is characterized by a change from a predominantly photozoan to a heterozoan carbonate-producing system, which coincides in time with a general increase in detrital and nutrient input. The clay mineral record shows the appearance of kaolinite within the Rawil Member, whereas this mineral is absent from the uppermost Lower and lowermost Upper Schrattenkalk Members. This indicates the installation of a warmer and more humid climate during this time period. A negative peak in 513C is recorded at the top of the Lower Schrattenkalk Member, and correlates with the well-known negative excursion of -l%o occurring in other basins and dated as latest Barremian, thus confirming a latest Barremian and earliest Aptian age for the Lower Schrattenkalk and Rawil Members, respectively. Furthermore, a sequence stratigraphie framework has been defined for the Rawil Member, based on both the ecology of faunal and floral assemblages, and their palaeoenvironmental interpretation, as well as on the stacking pattern of limestone beds observed during field prospection. The presence of a sequence boundary is postulated near the top of the Lower Schrattenkalk Member, which is correlated with the earliest Aptian SbAl defined in Vercors (France). The SbAl is characterized by a maximum of proximal assemblages and by the disappearance of several benthic foraminiferal species. Within the Rawil Member itself, the stacking pattern and microfacies trends are interpreted to represent the TST of the first Aptian sequence. With regards to the pelagic setting in the Tethyan realm, I investigated the Gorgo a Cerbara section (central Italy). There, thin organic-rich layers occur episodically in pelagic carbonates of the upper Barremian portion of the Maiolica Formation. They are associated with high Corg:Ptot ratios, which indicate the presence of intermittent dysoxic to anoxic conditions. Coarse correlations are also observed between TOC, Ρ and biogenic silica contents, indicating links between Ρ availability, productivity, and organic matter preservation. The corresponding 813Ccarb and δ180 records remain, however, quite stable, indicating that these brief periods of enhanced TOC preservation did not have sufficient impact on the marine carbon household to deviate 6,3C records, and are probably not the consequence of major climate change. On the other hand, organic-rich layers become more frequent around the Barremian-Aptian boundary in both pelagic and hemi-pelagic environments (Gorgo a Cerbara and La Bédoule, France), which are correlated with negative excursions in 6l3Ccarb and 613Corg records. During the earliest Aptian, at Gorgo a Cerbara, the frequency of organic-rich intervals progressively increases and redox-sensitive trace-element enrichments become more frequent, until the highest TOC-enriched level just below the "Livello Selli", indicator of Oceanic Anoxic Event la (OAEla). The latter is associated with the well-known negative spike in 613Ccarb and S,3Corg records, a diminution in the δ,80 record interpreted as the consequence of a wanning interval, an important peak in Ρ accumulation and high Cor::Ptot ratios indicating the prevalence of anoxic conditions. The Selli Level (OAEla) documents a general cooling phase and coincides with maximum RSTE enrichments as well as high Corg:Ptot ratios, which confirm the importance of anoxic conditions during OAE1 a at this site.During the Early Aptian, environmental change on the platform is expressed by orbitolinids proliferation that may be induced by both climate change and sea-level rise. In the basin, the successive black shales horizons from the Late Barremian until the OAE la are interpreted as the progressive impact of palaeoenvironmental change probably linked to the formation of the Ontong- Java plate-basalt plateau.RésuméCe travail de thèse a permis d'investiguer les interactions entre les variations du niveau marin et les changements climatiques sur la plate-forme helvétique ainsi qu'en domaine pélagique à la limite Barrémien-Aptien (Crétacé).Dans les Alpes helvétiques, la limite Barrémien-Aptien est marquée par la transition du Schrattenkalk inférieur, caractérisé par des carbonates photozaires, au Membre de Rawil caractérisé par des carbonates héterozoaires. Cette transition est marquée par une arrivée massive d'éléments détritiques et un apport de nutriments ayant entraîné la prolifération de foraminifères agglutinés tels que les orbitolines. L'analyse des minéraux argileux indique l'apparition de la kaolinite durant le Membre de Rawil, interprétée comme l'installation d'un climat plus chaud et humide. Un pic négatif en 513C est enregistré au sommet du Schrattenkalk inférieur correspond à l'excursion négative de -1%0 bien connue en domaine pélagique et datée comme Barrémien terminal. Cette corrélation apporte un contrôle chronostratigraphique supplémentaire permettant de dater le Schrattenkalk inférieur du Barrémien sup. et le Membre de Rawil de l'Aptien inf. D'autre part, une étude stratigraphique, basée sur des observations de terrain et sur l'interprétation d'assemblages floristiques et faunistiques en terme de paléoenvironnement a permis de mettre en évidence une limite de séquence au sommet du Schrattenkalk inf., corrélable avec la SbAl définie dans le Vercors. Durant la mise en place du Membre de Rawil, l'évolution des microfaciès est interprétée comme le « Transgressive System Tract » de la première séquence aptienne.En domaine pélagique, de minces couches riches en matière organique (MO) apparaissent dès le Barrémien sup. dans la coupe de Gorgo a Cerbara (Italie). Elles sont associées à un ratio C:P élevé indiquant des conditions épisodiquement dysoxiques à anoxiques. De plus, une corrélation nette entre Carbone Organique Total (TOC), phosphore (P) et silice biogénique est observée correspondant à un lien entre Ρ disponible, productivité et préservation de la MO. Pourtant, dans le même temps, le ÔI3C et le δ1βΟ restent constants indiquant des conditions environnementales stables et un cycle du carbone non perturbé par la préservation de MO qui ne serait pas la conséquence d'un changement climatique global mais juste d'un effet local.Ala limite Barrémien-Aptien, en domaine hémi-pélagique (La Bédoule, France) et pélagique (Gorgo a Cerbara), les couches riches en MO sont plus fréquentes et plus épaisses, elles se sont déposées en même temps qu'un pic négatif en 513CCARB et ô13Coib probablement dû à un épisode volcanique. A l'Aptien inf. le TOC des niveaux riches en MO augmente progressivement en même temps que la teneur en éléments traces jusqu'au dernier enrichissement avant l'événement anoxique océanique la (OAE la) correspondant au « niveau critique inf. », indiquant des conditions anoxiques moins restreintes. Celui-ci est également caractérisé par le fameux pic négatif en Ô13C (C3), une diminution du δ180 interprétée comme un réchauffement, par un pic en Ρ et un ratio C:P élevé. L'OAE 1 a, quant à lui, enregistre un refroidissement et coïncide avec le maximum en éléments traces ainsi qu'un fort ratio C:P mettant en valeur l'importance des conditions anoxiques pendant 1ΌΑΕ la dans cette coupe alors qu'aucune perturbation n'est enregistrés à La Bédoule probablement à cause de conditions paléogéographiques locales.Durant l'Aptien inf., les changements environnementaux sur la plate-forme se marquent par la prolifération d'orbitolines due à un changement climatique et une hausse du niveau marin. En domaine profond, la succession de niveaux riches en MO du Barrémien sup. jusqu'à l'OAE la documente l'impact progressif de changements paléoenvironnementaux, probablement liés à la formation du plateau d'Ontong Java à l'ouest de l'océan Pacifique.

Coastal salina evaporites of the Triassic-Liassic boundary in the Iberian Peninsula: the Alacón borehole

The evaporite unit (the Lécera Formation), which was formed at the Triassic¿Liassic boundary in the Aragonian Branch of the Iberian Chain, was studied at the 01 Alacón borehole (Alacón village, Teruel province), where it is mainly constituted by a thick (>e and reflect deeper water settings, whereas in the upper part they correspond to shallower water settings. The evaporite sedimentation mainly occurred in a subsiding coastal basin of the salina or lagoon type. In this setting, the subaqueous precipitation of the carbonate and gypsum lithofacies was followed, in each cycle, by the interstitial growth of anhydrite in exposed conditions. As a whole, the evaporite succession reflects an infilling process. The conversion into anhydrite of the selenitic gypsum -probably also of the rest of depositional gypsum lithofaciesstarted under synsedimentary conditions and followed during shallow to moderate burial diagenesis.

The Permo-Triassic boundary in the Antalya Nappes (Western Taurides - Turkey)

The Antalya nappes (western Taurides-Turkey)*consist of several tectonic units which document the*Southern Neotethyan paleomargin from the Arabo-African*shallow shelf to the oceanic crust.*The Kerner Gorge Units (Upper Antalya nappes)*show a full stratigraphical succession from Ordovician*to Late Cretaceous. A carbonate platform regime*appeared during Late Permian times and existed up*to the early Middle Triassic. For detailed investigations*on the Permo-Triassic boundary, two lithostratigraphic*profiles have been selected: the Curuk*dag and the Kerner Gorge sections.*The main results presented in this paper are : 1) the Late Permian Pamucak Formation (Midian-*Dzhulfian) consists of calcareous algae-foraminiferae*bearing black limestones, locally rich in*brachiopods, crinoids and bryozoae : 2) this black limestone is overlain by an oolitic*grainstone. In the Curuk dag section, the oolitic horizon*is capped by a thin level of calcrete type; emersive*conditions are also inferred by a strong diagenetic*change within the oolitic deposit : 3) the first Early Triassic fossils, appearing*within or above the oolitic grainstone, are microforaminifera*and Pseudoclaraia wangi (late Griesbachian*in age). In the Curuk dag, a rich Early Triassic*microforaminifera association seems linked to a microbiallite*boundstone facies : 4) the overlying unfossiliferous lime mudstone,*the oolitical thick bedded grainstone, the variegated*marly limestone and the vermicular limestone facies*are present. not only in southern Turkey but seem*constant through ' the entire peri arabo-african platform.*Striking similarities appear between the studied*profiles and the Bellerophon-Werfen succession in the*Southern Alps..

Partnering in the Dynamic Environment: The Role of Trust in Asymmetric Technology Partnership Formation

The purpose of this study was to increase the understanding of the role and nature of trust in asymmetric technology partnership formation. In the knowledge-based "learning race" knowledge is considered as a primary source for competitive advantage. In the emerging ICT sector the high pace of technological change, the convergence of technologies and industries as well as the increasing complexity and uncertainty have forced even the largest players to seek cooperation for complementary knowledge and capabilities. Small technology firms need the complementary resources and legitimacy of the large firms to grow and compete in the global market place. Most of the earlier research indicates, however, that partnerships with asymmetric size, managerial resources and cultures have failed. A basic assumption supported by earlier research was that trust is a critical factor in asymmetric technology partnership formation. Asymmetric technology partnership formation is a dynamic and multi-dimensional process, and consequently a holistic research approach was selected. Research issue was approached from different levels: the individual decision-maker, the firm and the relationship between the parties. Also the impact of the dynamic environment and technology content was analyzed. A multitheoretical approach and a qualitative research method with in-depth interviews in five large ICT companies and eight small ICT companies enabled a holistic and rich view of the research issue. Study contributes on the scarce understanding on the nature and evolution of trust in asymmetric technology partnership formation. It sheds also light on the specific nature of asymmetric technology partnerships. The partnerships were found to be tentative and the diverse strategic intent of small and large technology firms appeared as a major challenge. The role of the boundary spanner was highlighted as a possibility to match the incompatible organizational cultures. A shared vision was found to be a pre-condition for individual-based fast trust leading to intuitive decision-making and experimentation. The relationships were tentative and they were continuously re-evaluated through the key actors' sense making of the technology content, asymmetry and the dynamic environment. A multi-dimensional conceptualization for trust was created and propositions on the role and nature of trust for further research are given. The purpose of this study was to increase the understanding of the role and nature of trust in asymmetric technology partnership formation. In the knowledge-based "learning race" knowledge is considered as a primary source for competitive advantage. In the emerging ICT sector the high pace of technological change, the convergence of technologies and industries as well as the increasing complexity and uncertainty have forced even the largest players to seek cooperation for complementary knowledge and capabilities. Small technology firms need the complementary resources and legitimacy of the large firms to grow and compete in the global market place. Most of the earlier research indicates, however, that partnerships with asymmetric size, managerial resources and cultures have failed. A basic assumption supported by earlier research was that trust is a critical factor in asymmetric technology partnership formation. Asymmetric technology partnership formation is a dynamic and multi-dimensional process, and consequently a holistic research approach was selected. Research issue was approached from different levels: the individual decision-maker, the firm and the relationship between the parties. Also the impact of the dynamic environment and technology content was analyzed. A multitheoretical approach and a qualitative research method with in-depth interviews in five large ICT companies and eight small ICT companies enabled a holistic and rich view of the research issue. Study contributes on the scarce understanding on the nature and evolution of trust in asymmetric technology partnership formation. It sheds also light on the specific nature of asymmetric technology partnerships. The partnerships were found to be tentative and the diverse strategic intent of small and large technology firms appeared as a major challenge. The role of the boundary spanner was highlighted as a possibility to match the incompatible organizational cultures. A shared vision was found to be a pre-condition for individual-based fast trust leading to intuitive decision-making and experimentation. The relationships were tentative and they were continuously re-evaluated through the key actors' sense making of the technology content, asymmetry and the dynamic environment. A multi-dimensional conceptualization for trust was created and propositions on the role and nature of trust for further research are given.

Modeling of fireside deposit formation in two industrial furnaces

Fireside deposits can be found in many types of utility and industrial furnaces. The deposits in furnaces are problematic because they can reduce heat transfer, block gas paths and cause corrosion. To tackle these problems, it is vital to estimate the influence of deposits on heat transfer, to minimize deposit formation and to optimize deposit removal. It is beneficial to have a good understanding of the mechanisms of fireside deposit formation. Numerical modeling is a powerful tool for investigating the heat transfer in furnaces, and it can provide valuable information for understanding the mechanisms of deposit formation. In addition, a sub-model of deposit formation is generally an essential part of a comprehensive furnace model. This work investigates two specific processes of fireside deposit formation in two industrial furnaces. The first process is the slagging wall found in furnaces with molten deposits running on the wall. A slagging wall model is developed to take into account the two-layer structure of the deposits. With the slagging wall model, the thickness and the surface temperature of the molten deposit layer can be calculated. The slagging wall model is used to predict the surface temperature and the heat transfer to a specific section of a super-heater tube panel with the boundary condition obtained from a Kraft recovery furnace model. The slagging wall model is also incorporated into the computational fluid dynamics (CFD)-based Kraft recovery furnace model and applied on the lower furnace walls. The implementation of the slagging wall model includes a grid simplification scheme. The wall surface temperature calculated with the slagging wall model is used as the heat transfer boundary condition. Simulation of a Kraft recovery furnace is performed, and it is compared with two other cases and measurements. In the two other cases, a uniform wall surface temperature and a wall surface temperature calculated with a char bed burning model are used as the heat transfer boundary conditions. In this particular furnace, the wall surface temperatures from the three cases are similar and are in the correct range of the measurements. Nevertheless, the wall surface temperature profiles with the slagging wall model and the char bed burning model are different because the deposits are represented differently in the two models. In addition, the slagging wall model is proven to be computationally efficient. The second process is deposit formation due to thermophoresis of fine particles to the heat transfer surface. This process is considered in the simulation of a heat recovery boiler of the flash smelting process. In order to determine if the small dust particles stay on the wall, a criterion based on the analysis of forces acting on the particle is applied. Time-dependent simulation of deposit formation in the heat recovery boiler is carried out and the influence of deposits on heat transfer is investigated. The locations prone to deposit formation are also identified in the heat recovery boiler. Modeling of the two processes in the two industrial furnaces enhances the overall understanding of the processes. The sub-models developed in this work can be applied in other similar deposit formation processes with carefully-defined boundary conditions.

Variations of surface boundary layer parameters associated with Cyclone Gonu over the Arabian Sea using QuikSCAT data

This study attempted to quantify the variations of the surface marine atmospheric boundary layer (MABL) parameters associated with the tropical Cyclone Gonu formed over the Arabian Sea during 30 May–7 June 2007 (just after the monsoon onset). These characteristics were evaluated in terms of surface wind, drag coefficient, wind stress, horizontal divergence, and frictional velocity using 0.5◦ × 0.5◦ resolution Quick Scatterometer (QuikSCAT) wind products. The variation of these different surface boundary layer parameters was studied for three defined cyclone life stages: prior to the formation, during, and after the cyclone passage. Drastic variations of the MABL parameters during the passage of the cyclone were observed. The wind strength increased from 12 to 22 m s−1 in association with different stages of Gonu. Frictional velocity increased from a value of 0.1–0.6 m s−1 during the formative stage of the system to a high value of 0.3–1.4 m s−1 during the mature stage. Drag coefficient varied from 1.5 × 10−3 to 2.5 × 10−3 during the occurrence of Gonu. Wind stress values varied from 0.4 to 1.1 N m−2. Wind stress curl values varied from 10 × 10−7 to 45 × 10−7 N m−3. Generally, convergent winds prevailed with the numerical value of divergence varying from 0 to –4 × 10−5 s−1. Maximum variations of the wind parameters were found in the wall cloud region of the cyclone. The parameters returned to normally observed values in 1–3 days after the cyclone passage

The influence of the atmospheric boundary layer on nocturnal layers of noctuids and other moths migrating over southern Britain

Insects migrating at high altitude over southern Britain have been continuously monitored by automatically-operating, vertical-looking radars over a period of several years. During some occasions in the summer months, the migrants were observed to form well-defined layer concentrations, typically at heights of 200-400 m, in the stable night-time atmosphere. Under these conditions, insects are likely to have control over their vertical movements and are selecting flight heights which are favourable for long-range migration. We therefore investigated the factors influencing the formation of these insect layers by comparing radar measurements of the vertical distribution of insect density with meteorological profiles generated by the UK Met. Office’s Unified Model (UM). Radar-derived measurements of mass and displacement speed, along with data from Rothamsted Insect Survey light traps provided information on the identity of the migrants. We present here three case studies where noctuid and pyralid moths contributed substantially to the observed layers. The major meteorological factors influencing the layer concentrations appeared to be: (a) the altitude of the warmest air, (b) heights corresponding to temperature preferences or thresholds for sustained migration and (c), on nights when air temperatures are relatively high, wind-speed maxima associated with the nocturnal jet. Back-trajectories indicated that layer duration may have been determined by the distance to the coast. Overall, the unique combination of meteorological data from the UM and insect data from entomological radar described here show considerable promise for systematic studies of high-altitude insect layering.

Hiatal surfaces from the Miocene Globigerina Limestone Formation of Malta: Biostratigraphy, sedimentology, trace fossils and early diagenesis

The Miocene Globigerina Limestone of the Maltese islands contains widespread omission surfaces with very different characteristics and origins. The terminal Lower Globigerina Limestone hardground (TLGLHg) formed during a period of falling sea level. Coccolith assemblages suggest shallowness. Sedimentary structures and trace fossil assemblages, indicate increasing frequency of storm events and erosional episodes, towards the surface. Calcite cementation which took place around Thalassinoides burrows and formed irregular nodules was followed by dissolution of aragonite. It is suggested that lithification was linked to microbial reactions involving organic matter. In contrast two later surfaces, the terminal Middle Globigerina Limestone omissionground (TMGLOg), which marks the Lower to Middle Miocene boundary, and the Fomm-ir-Rih local hardground (FiRLHg) both contain early diagenetic dolomite. Lithification took place in two phases. The dolomite is interpreted to have formed beneath the sea floor: it was subsequently exhumed and partially corroded as the precipitation of calcitic and phosphatic cements took place around burrows open to the circulation of sea water. (C) 2008 Elsevier B.V. All rights reserved.

Motion of the dayside polar cap boundary during substorm cycles: II. Generation of poleward-moving events and polar cap patches by pulses in the magnetopause reconnection rate

Using data from the EISCAT (European Incoherent Scatter) VHF and CUTLASS (Co-operative UK Twin- Located Auroral Sounding System) HF radars, we study the formation of ionospheric polar cap patches and their relationship to the magnetopause reconnection pulses identified in the companion paper by Lockwood et al. (2005). It is shown that the poleward-moving, high-concentration plasma patches observed in the ionosphere by EISCAT on 23 November 1999, as reported by Davies et al. (2002), were often associated with corresponding reconnection rate pulses. However, not all such pulses generated a patch and only within a limited MLT range (11:00–12:00 MLT) did a patch result from a reconnection pulse. Three proposed mechanisms for the production of patches, and of the concentration minima that separate them, are analysed and evaluated: (1) concentration enhancement within the patches by cusp/cleft precipitation; (2) plasma depletion in the minima between the patches by fast plasma flows; and (3) intermittent injection of photoionisation-enhanced plasma into the polar cap. We devise a test to distinguish between the effects of these mechanisms. Some of the events repeat too frequently to apply the test. Others have sufficiently long repeat periods and mechanism (3) is shown to be the only explanation of three of the longer-lived patches seen on this day. However, effect (2) also appears to contribute to some events. We conclude that plasma concentration gradients on the edges of the larger patches arise mainly from local time variations in the subauroral plasma, via the mechanism proposed by Lockwood et al. (2000).

Conformational behavior of different possible ways of oligoglycine formation in a solvent-free environment

The possible ways for glycine oligopeptide formation in gas phase, both in the extended P-strand like conformation and folded 2(7)-ribbon like conformations are analyzed using quantum chemical calculations. We focus on the sequential formation of peptide bond through upgradation of the immediate lower order molecule and observe the consequences in other related processes like oligoglycine formation through simultaneous peptide linkage of n glycine monomers and interchange of molecular conformation through peptide linkage. A comparison is made between the structures and binding energies obtained for both conformers. All binding energies are increased by the zero-point energy contribution. The role of electron correlation effects is briefly analyzed. The folded 2(7)-ribbon-like conformations in vacuo are found to be more stable in comparison to the extended structure. (c) 2007 Elsevier B.V. All rights reserved.

Chemostratigraphy of the Tamengo Formation (Corumba Group, Brazil) A contribution to the calibration of the Ediacaran carbon-isotope curve

The Corumba Group cropping out in the southern Paraguay Belt in Brazil is one of the most complete Ediacaran sedimentary archives of palaeogeographic climatic biogeochemical and biotic evolution in southwestern Gondwana The unit hosts a rich fossil record including acritarchs vendotaenids (Vendo taenia Eoholynia) soft-bodied metazoans (Corumbella) and skeletal fossils (Cloudina Titanotheca) The Tamengo Formation made up mainly of limestones and marls provides a rich bio- and chemostratigraphic record Several outcrops formerly assigned to the Cuiaba Group are here included in the Tamengo Formation on the basis of lithological and chemostratigraphical criteria High-resolution carbon isotopic analyses are reported for the Tamengo Formation showing (from base to top) (1) a positive delta(13)C excursion to +4 parts per thousand PDB above post-glacial negative values (2) a negative excursion to -3 5 parts per thousand associated with a marked regression and subsequent transgression (3) a positive excursion to +5 5 parts per thousand and (4) a plateau characterized by delta(13)C around +3 parts per thousand A U-Pb SHRIMP zircon age of an ash bed Interbedded in the upper part of the delta(13)C positive plateau yielded 543 +/- 3 Ma which is considered as the depositional age (Babinski et al 2008a) The positive plateau in the upper Tamengo Formation and the preceding positive excursion are ubiquitous features in several successions worldwide including the Nama Group (Namibia) the Dengying Formation (South China) and the Nafun and Ara groups (Oman) This plateau is constrained between 542 and 551 Ma thus consistent with the age of the upper Tamengo Formation The negative excursion of the lower Tamengo Formation may be correlated to the Shuram-Wonoka negative anomaly although delta(13)C values do not fall beyond -3 5 parts per thousand in the Brazilian sections Sedimentary breccias occur just beneath this negative excursion in the lower Tamengo Formation One possible interpretation of the origin of these breccias is a glacioeustatic sea-level fall but a tectonic interpretation cannot be completely ruled out Published by Elsevier B V