Design of an experimental apparatus to analyse bagasse behaviour in a chute

Pressure feeder chutes are pieces of equipment used in sugar cane crushing to increase the amount of cane that can be put through a mill. The continuous pressure feeder was developed with the objective to provide a constant feed of bagasse under pressure to the mouth of the crushing mills. The pressure feeder chute is used in a sugarcane milling unit to transfer bagasse from one set of crushing rolls to a second set of crushing rolls. There have been many pressure feeder chute failures in the past. The pressure feeder chute is quite vulnerable and if the bagasse throughput is blocked at the mill rollers, the pressure build-up in the chute can be enormous, which can ultimately result in failure. The result is substantial damage to the rollers, mill and chute construction, and downtimes of up to 48 hours can be experienced. Part of the problem is that the bagasse behaviour in the pressure feeder chute is not understood well. If the pressure feeder chute behaviour was understood, then the chute geometry design could be modified in order to minimise risk of failure. There are possible avenues for changing pressure feeder chute design and operations with a view to producing more reliable pressure feeder chutes in the future. There have been previous attempts to conduct experimental work to determine the causes of pressure feeder chute failures. There are certain guidelines available, however pressure feeder chute failures continue. Pressure feeder chute behaviour still remains poorly understood. This thesis contains the work carried out between April 14th 2009 and October 10th 2012 that focuses on the design of an experimental apparatus to measure forces and visually observe bagasse behaviour in an attempt to understand bagasse behaviour in pressure feeder chutes and minimise the risk of failure.

The use of penumbrae to define and analyse non-standard fields

Aim A new method of penumbral analysis is implemented which allows an unambiguous determination of field size and penumbra size and quality for small fields and other non-standard fields. Both source occlusion and lateral electronic disequilibrium will affect the size and shape of cross-axis profile penumbrae; each is examined in detail. Method A new method of penumbral analysis is implemented where the square of the derivative of the cross-axis profile is plotted. The resultant graph displays two peaks in the place of the two penumbrae. This allows a strong visualisation of the quality of a field penumbra, as well as a mathematically consistent method of determining field size (distance between the two peak’s maxima), and penumbra (full-widthtenth-maximum of peak). Cross-axis profiles were simulated in a water phantom at a depth of 5 cm using Monte Carlo modelling, for field sizes between 5 and 30 mm. The field size and penumbra size of each field was calculated using the method above, as well as traditional definitions set out in IEC976. The effect of source occlusion and lateral electronic disequilibrium on the penumbrae was isolated by repeating the simulations removing electron transport and using an electron spot size of 0 mm, respectively. Results All field sizes calculated using the traditional and proposed methods agreed within 0.2 mm. The penumbra size measured using the proposed method was systematically 1.8 mm larger than the traditional method at all field sizes. The size of the source had a larger effect on the size of the penumbra than did lateral electronic disequilibrium, particularly at very small field sizes. Conclusion Traditional methods of calculating field size and penumbra are proved to be mathematically adequate for small fields. However, the field size definition proposed in this study would be more robust amongst other nonstandard fields, such as flattening filter free. Source occlusion plays a bigger role than lateral electronic disequilibrium in small field penumbra size.

Emerging methods in using GIS to analyse Barmah Forest virus disease in Queensland, Australia

Barmah Forest virus (BFV) disease is an emerging mosquito-borne disease in Australia. We aimed to outline some recent methods in using GIS for the analysis of BFV disease in Queensland, Australia. A large database of geocoded BFV cases has been established in conjunction with population data. The database has been used in recently published studies conducted by the authors to determine spatio-temporal BFV disease hotspots and spatial patterns using spatial autocorrelation and semi-variogram analysis in conjunction with the development of interpolated BFV disease standardised incidence maps. This paper briefly outlines spatial analysis methodologies using GIS tools used in those studies. This paper summarises methods and results from previous studies by the authors, and presents a GIS methodology to be used in future spatial analytical studies in attempt to enhance the understanding of BFV disease in Queensland. The methodology developed is useful in improving the analysis of BFV disease data and will enhance the understanding of the BFV disease distribution in Queensland, Australia.

Exploring the usefulness of structural–functional approaches to analyse governance of planning systems

Existing planning theories tend to be limited in their analytical scope and often fail to account for the impact of many interactions between the multitudes of stakeholders involved in strategic planning processes. Although many theorists rejected structural–functional approaches from the 1970s, this article argues that many of structural–functional concepts remain relevant and useful to planning practitioners. In fact, structural–functional approaches are highly useful and practical when used as a foundation for systemic analysis of real-world, multi-layered, complex planning systems to support evidence-based governance reform. Such approaches provide a logical and systematic approach to the analysis of the wider governance of strategic planning systems that is grounded in systems theory and complementary to existing theories of complexity and planning. While we do not propose its use as a grand theory of planning, this article discusses how structural–functional concepts and approaches might be applied to underpin a practical analysis of the complex decision-making arrangements that drive planning practice, and to provide the evidence needed to target reform of poorly performing arrangements.

Submission to KPMG review of the Federal Government Initiative to “analyse dementia program and services funded by the Department of Social Services"

The comments I make are based on my nearly twenty years involvement in the dementia cause at both a national and international level. In preparation, I read two papers namely the Ministerial Dementia Forum – Option Paper produced by KPMG Management Consultants (2014) and Analysis of Dementia Programmes and Services Funded by the Department of Social Services: Conversation Starter prepared by KPMG as a preparation document for those attending a workshop in Brisbane on April 22nd 2015. Dementia is a complex “syndrome” and as is often said, “when you meet one person with dementia, you have met one” meaning that no two persons with dementia are the same. Even in dementia care, Australia is a “lucky country” and there is much to be said for the quality and diversity of dementia care available for people living with dementia. Despite this, I agree with the many views expressed in the material I read that there is scope for improvement, especially in the way that services are coordinated. In saying that, I do not purport to have all the solutions nor claim to have the knowledge required to comment on all the programs covered by this review. If I appear to be a “biased” advocate for Alzheimer’s Australia across the States and Territories, it is because I have seen constant evidence of ordinary people doing extraordinary things with inadequate resources. Dementia care is not cheap and if those funding dementia services are primarily only interested in economic outcomes and benefits, the real purpose of this consultation will be defeated. In addition, nowhere in the material I have read is there any recognition that in many instances program funding is a complex mix of government (at all levels) and private funding. This makes reviewing those programs more complex and less able to be coordinated at a Departmental level. It goes without saying therefore that the Federal Government is not” the only player in this game”. Of all those participating in this review, Alzheimer’s Australia is best placed to comment on programs as it is more connected to people living with dementia and has probably the best record of consulting with them. It would appear however that their role has been reduced to that of a “bit player”. Without wanting to be critical, the Forum Report which deals with the comments made at a gathering of 70 individuals and organisations, only three (3) or 4.28% were actual carers of people living with dementia. Even if it is argued that a number of organisations present represented consumers, the percentage goes up only marginally to 8.57% which is hardly an endorsement of the forum being “consumer driven”. The predominance of those present were service providers, each with their own agenda and each seeking advantage for their “business”. The final point I want to make before commenting on more specific, program related issues, is that many programs being reviewed have a much longer history than is reflected in the material I have read. Their growth and development was pioneered by Alzheimer’s Australia organisations across the country often with no government funding. Attempts to bring about better coordination of programs were often at the behest of Alzheimer’s Australia but in the main were ignored. The opportunity to now put this right is long overdue.

Using low dose computerized tomography to morphometrically analyse the thoracic intervertebral foramen osseous anatomy in adolescent idiopathic scoliosis

INTRODUCTION The dimensions of the thoracic intervertebral foramen in adolescent idiopathic scoliosis (AIS) have not previously been quantified. During posterior approach scoliosis correction surgery pedicle screws may occasionally breach into the foramen. Better understanding of the dimensions of the foramen may be useful in surgical planning. This study describes a reproducible method for measurement of the thoracic foramen in AIS using computerized tomography (CT). METHODS In 23 pre-operative female patients with Lenke 1 type AIS with right side convexity major curves confined to the thoracic spine the foraminal height (FH), foraminal width (FW), pedicle to superior articular process distance (P-SAP) and cross sectional foraminal area (FA) were measured using multiplanar reconstructed CT. Measurements were made at entrance, midpoint and exit of the thoracic foramina from T1/T2 to T11/T12. Results were correlated with potential dependent variables of major curve Cobb Angle measured on X-ray and CT, Age, Weight, Lenke classification subtype, Risser Grade and number of spinal levels in the major curve. RESULTS The FH, FW, P-SAP and FA dimensions and ratios are all significantly larger on the convexity of the major curve and maximal at or close to the apex. Mean thoracic foraminal dimensions change in a predictable manner relative to position on the major thoracic curve. There was no significant correlation with the measured foraminal dimensions or ratios and the potential dependent variables. The average ratio of convexity to concavity dimensions at the apex foramina for entrance, midpoint and exit respectively are FH (1.50, 1.38, 1.25), FW (1.28, 1.30, 0.98), FA (2.06, 1.84, 1.32), P-SAP (1.61, 1.47, 1.30). CONCLUSION Foraminal dimensions of the thoracic spine are significantly affected by AIS. Foraminal dimensions have a predictable convexity to concavity ratio relative to the proximity to the major curve apex. Surgeons should be aware of these anatomical differences during scoliosis correction surgery.

Die Eigenschaften der Benennungen und ihr Einfluss auf deren Verwendung am Beispiel der Euro-Währung : Eine quantitative und kontrastive Analyse der Terminologie im Finnischen und im Deutschen

This dissertation deals with the terminology of the Euro currency. Its aims are to determine the characteristics of the designations in a certain LSP and to discover whether the recommendations and rules that have been given to the formation of designations and 'ideal' designations have any influence on the usage of the designations. The characteristics analysed include length of the designation, part of speech, form, formation method, constancy, monosemy, suitability to a concept system and degree of specialty. The study analyses the actual usage of the designations in texts and the implementation of the designations. The study is an adaptation of a terminometric survey and uses concept analysis and quantitative analysis as its basic methods. The frequency of each characteristic is measured in terms of statistics. It is assumed that the 'ideality' of a designation influences its usage, for example that if a designation is short, it is used more than its longer rivals (synonyms). The results are analysed in a corpus consisting of a compilation of different texts concerning the Euro. The corpus is divided according to three features: year (1998-2003), genre (judicial texts, annual reports and brochures) and language (Finnish and German). Each analysis is performed according to each of these features and compared with the others. The results indicate that some of the characteristics of the designations indeed seem to have an influence on the usage of the designations. For example, monosemy and suitability to the concept system often lead to the implementation of the designation having the ideal or certain value in these characteristics in the analysed Finnish material. In German material, an 'ideal' value in the characteristics leads to the implementation of the designations more often than in Finnish. The contrastive study indicates that, for example, suitability to a concept system leads to implementation of a designation in judicial texts more often than in other genres. The recommendations given to an 'ideal' designation are thus often acceptable, but they cannot be generalized for all languages in the same extent.

Zur Sättigung der Valenz in den Kleinen Meldungen des Typus Notiz : Eine pragmatisch fundierte Analyse

Valency Realization in Short Excerpts of News Text. A Pragmatics-funded analysis This dissertation is a study of the so-called pragmatic valency. The aim of the study is to examine the phenomenon both theoretically by discussing the research literature and empirically based on evidence from a text corpus consisting of 218 short excerpts of news text from the German newspaper Frankfurter Allgemeine Zeitung. In the theoretical part of the study, the central concepts of the valency and the pragmatic valency are discussed. In the research literature, the valency denotes the relation among the verb and its obligatory and optional complements. The pragmatic valency can be defined as modification of the so-called system valency in the parole, including non-realization of an obligatory complement, non- realization of an optional complement and realization of an optional complement. Furthermore, the investigation of the pragmatic valency includes the role of the adjuncts, elements that are not defined by the valency, in the concrete valency realization. The corpus study investigates the valency behaviour of German verbs in a corpus of about 1500 sentences combining the methodology and concepts of valency theory, semantics and text linguistics. The analysis is focused on the about 600 sentences which show deviations from the system valency, providing over 800 examples for the modification of the system valency as codified in the (valency) dictionaries. The study attempts to answer the following primary question: Why is the system valency modified in the parole? To answer the question, the concept of modification types is entered. The modification types are recognized using distinctive feature bundles in which each feature with a negative or a positive value refers to one reason for the modification treated in the research literature. For example, the features of irrelevance and relevance, focus, world and text type knowledge, text theme, theme-rheme structure and cohesive chains are applied. The valency approach appears in a new light when explored through corpus-based investigation; both the optionality of complements and the distinction between complements and adjuncts as defined in the present valency approach seem in some respects defective. Furthermore, the analysis indicates that the adjuncts outside the valency domain play a central role in the concrete realization of the valency. Finally, the study suggests a definition of pragmatic valency, based on the modification types introduced in the study and tested in the corpus analysis.

Local systems, global impacts : Using life cycle assessment to analyse the potential and constraints of industrial symbioses

Human activities extract and displace different substances and materials from the earth s crust, thus causing various environmental problems, such as climate change, acidification and eutrophication. As problems have become more complicated, more holistic measures that consider the origins and sources of pollutants have been called for. Industrial ecology is a field of science that forms a comprehensive framework for studying the interactions between the modern technological society and the environment. Industrial ecology considers humans and their technologies to be part of the natural environment, not separate from it. Industrial operations form natural systems that must also function as such within the constraints set by the biosphere. Industrial symbiosis (IS) is a central concept of industrial ecology. Industrial symbiosis studies look at the physical flows of materials and energy in local industrial systems. In an ideal IS, waste material and energy are exchanged by the actors of the system, thereby reducing the consumption of virgin material and energy inputs and the generation of waste and emissions. Companies are seen as part of the chains of suppliers and consumers that resemble those of natural ecosystems. The aim of this study was to analyse the environmental performance of an industrial symbiosis based on pulp and paper production, taking into account life cycle impacts as well. Life Cycle Assessment (LCA) is a tool for quantitatively and systematically evaluating the environmental aspects of a product, technology or service throughout its whole life cycle. Moreover, the Natural Step Sustainability Principles formed a conceptual framework for assessing the environmental performance of the case study symbiosis (Paper I). The environmental performance of the case study symbiosis was compared to four counterfactual reference scenarios in which the actors of the symbiosis operated on their own. The research methods used were process-based life cycle assessment (LCA) (Papers II and III) and hybrid LCA, which combines both process and input-output LCA (Paper IV). The results showed that the environmental impacts caused by the extraction and processing of the materials and the energy used by the symbiosis were considerable. If only the direct emissions and resource use of the symbiosis had been considered, less than half of the total environmental impacts of the system would have been taken into account. When the results were compared with the counterfactual reference scenarios, the net environmental impacts of the symbiosis were smaller than those of the reference scenarios. The reduction in environmental impacts was mainly due to changes in the way energy was produced. However, the results are sensitive to the way the reference scenarios are defined. LCA is a useful tool for assessing the overall environmental performance of industrial symbioses. It is recommended that in addition to the direct effects, the upstream impacts should be taken into account as well when assessing the environmental performance of industrial symbioses. Industrial symbiosis should be seen as part of the process of improving the environmental performance of a system. In some cases, it may be more efficient, from an environmental point of view, to focus on supply chain management instead.  

Thermodynamic modeling to analyse composition of carbonaceous coatings of MnO and other oxides of manganese grown by MOCVD

Equilibrium thermodynamic analysis has been applied to the low-pressure MOCVD process using manganese acetylacetonate as the precursor. ``CVD phase stability diagrams'' have been constructed separately for the processes carried out in argon and oxygen ambient, depicting the compositions of the resulting films as functions of CVD parameters. For the process conduced in argon ambient, the analysis predicts the simultaneous deposition of MnO and elemental carbon in 1: 3 molar proportion, over a range of temperatures. The analysis predicts also that, if CVD is carried out in oxygen ambient, even a very low flow of oxygen leads to the complete absence of carbon in the film deposited oxygen, with greater oxygen flow resulting in the simultaneous deposition of two different manganese oxides under certain conditions. The results of thermodynamic modeling have been verified quantitatively for low-pressure CVD conducted in argon ambient. Indeed, the large excess of carbon in the deposit is found to constitute a MnO/C nanocomposite, the associated cauliflower-like morphology making it a promising candidate for electrode material in supercapacitors. CVD carried out in oxygen flow, under specific conditions, leads to the deposition of more than one manganese oxide, as expected from thermodynamic analysis ( and forming an oxide-oxide nanocomposite). These results together demonstrate that thermodynamic analysis of the MOCVD process can be employed to synthesize thin films in a predictive manner, thus avoiding the inefficient trial-and-error method usually associated with MOCVD process development. The prospect of developing thin films of novel compositions and characteristics in a predictive manner, through the appropriate choice of CVD precursors and process conditions, emerges from the present work.

Spin State Selective Excitation of Single Quantum Transitions Using Multiple Quantum Spectroscopy- an Aid to Analyse Complex Proton NMR spectra of Oriented Molecules

NMR spectra of molecules oriented in liquid-crystalline matrix provide information on the structure and orientation of the molecules. Thermotropic liquid crystals used as an orienting media result in the spectra of spins that are generally strongly coupled. The number of allowed transitions increases rapidly with the increase in the number of interacting spins. Furthermore, the number of single quantum transitions required for analysis is highly redundant. In the present study, we have demonstrated that it is possible to separate the subspectra of a homonuclear dipolar coupled spin system on the basis of the spin states of the coupled heteronuclei by multiple quantum (MQ)−single quantum (SQ) correlation experiments. This significantly reduces the number of redundant transitions, thereby simplifying the analysis of the complex spectrum. The methodology has been demonstrated on the doubly 13C labeled acetonitrile aligned in the liquid-crystal matrix and has been applied to analyze the complex spectrum of an oriented six spin system.