988 resultados para 243-1
Resumo:
Este trabajo fue realizado en la Quinta "Myriam", ubicada en el municipio de Diriamba, departamento de Carazo, Nicaragua, propiedad del Dr. Jorge Ferreira. La ubicación geográfica del municipio está comprendida entre los 11° 50' y 12° 00' de Latitud Norte y entre los 86° 00' y 86° 15' de Longitud Oeste, cuenta con una elevación de 551 m.s.n.m., los datos meteorológicos de la zona en los últimos cuatro años (90-93) en cuanto a temperatura, humedad relativa y precipitación promedio fueron: 23.8 °C, 84% y 1184,5 mm respectivamente, (INETER, Departamento de Estadística, 1993). En el presente ensayo, se utilizó un diseño estadístico completamente aleatorizado (DCA), mediante el cual se evaluó el efecto de 3 tratamientos (15, 30 y 45 días de destete) sobre las variables Peso de la Camada al Destete (PCD), Peso de la Madre al Destete (PMD), Peso de la Madre al Segundo Parto (PSP), Ganancia Media Diaria del Parto 1 al Parto 2 (GMDp 1.P2) , con 4 repeticiones por tratamiento, éstas repeticiones estuvieron constituidas por conejas primíparas, las cuales tuvieron un peso que osciló entre 3 - 3.18 kg. y edad homogénea de 7 meses. Las variables fueron sometidas a la prueba de Duncan para determinar la superioridad en rango por tratamiento. Mediante el análisis de varianza se encontró que el efecto de los tratamientos resultó ser altamente significativo sobre la variable Peso de la Camada al Destete (PCD) (P0.01), significativo sobre las variables Peso de la Madre al Segundo Parto (PSP) y Ganancia Media Diaria del Parto 1 al Parto 2 (GMD p 1.P2) (P0.1) y no significativo sobre la variable Peso de la Madre al Destete (PMD) (NS). El efecto de la covariable Peso al Primer Parto (P1P) resultó ser altamente significativo sobre las variables Peso de la Madre al Destete (PMD) y Peso de la Madre al Segundo Parto (PSP) (P0.01). Después de someter las variables a la prueba de DUNCAN se encontraron los siguientes promedios por tratamiento: Peso de la Camada al Destete (PCD) ; T.15 días 1.538 kg P.V.(C), T.30 días 3.360 kg P.V. (B), T.45 días 4.523 kg P.V. (A), Peso de la Madre al Destete (PMD); T.15 días 3.649 kg P.V. (A) T.30 días 3.549 kg P.V. (A), T.45 dias 3.493 kg P.V.(A). Peso de la Madre al Segundo Parto (PSP); T.15 días 3. 449 kg P.V. (B), T.30 días 3.628 kg P.V. (AB), T.45 días 3.777 kg P.V.(A). Ganancia Media Diaria del Parto 1 al Parto 2 (GMD p 1.P2) T .15 días (2.071 g (B), T.30 días 2.718 g (AB), T.45 días 2. 975 g (A). Los promedios y desviaciones standard para las variables Ganancia Media Diaria del Parto 1 al Destete 1 (GMDp1-D1)y Ganancia Media Diaria del Destete l al Parto 2 (GMDD1.P2) por tratamiento fueron: GMD P1-D1; T.l5 días 3.84 g ± 0.50 g, T.30 días 2.54 g ± 0.64 g, T.45 días 2.37 g ± 0.72 g. GMD D1-P2; T.l5 días 2.26 g ± 0.54 g, T.30 días 3.17 g ± 0.74 g, T.45 días 3.93 g ± 0.28 g. Se encontró que el alimento tipo único suministrado a los animales bajo experimentación, cumplió con los requerimientos nutricionales de la especie estudiada. Los costos encontrados por hembra, por tratamiento, fueron C$ 197.21 destete de 15 días, C$ 220.28 destete de 30 días, C$ 243 .1.4 destete de 45 días. Los costos por gazapo destetado fueron de C$ 5.48 destete de 15 días, C$ 6.12 destete de 30 días, C$ 8.10 destete de 45 días.
Resumo:
HfO2 films were deposited by electron beam evaporation with different deposition parameters. The properties such as refractive index, weak absorption, and laser induced damage thresholds (LIDTs) of these films have been investigated. It was found that when pulsed Nd:YAG 1064 nm laser is used to investigate LIDT of films: Metallic character is the main factor that influences LIDTs of films obtained from Hf starting material by ion-assisted reaction, and films prepared with higher momentum transfer parameter P have fewer metallic character; The ion-assisted reaction parameters are key points for preparing high LIDT films and if the parameters are chose properly, high LIDT films can be obtained. (c) 2004 Elsevier B.V. All rights reserved.
Resumo:
Multi-sheet InGaN/GaN quantum dots (QDs) were grown successfully by surface passivation processing and low-temperature growth in metalorganic chemical vapor deposition. This method based on the principle of increasing the energy barrier of adatom hopping by surface passivation and low-temperature growth, is quite different from present methods. The InGaN quantum dots in the first layer of about 40-nm-wide and 15-nm-high grown by this method were revealed by atomic force microscopy. The InGaN QDs in upper layer grew bigger. To our knowledge, the current-voltage characteristics of multi-sheet InGaN/GaN QDs were measured for the fist time. Two kinds of resonance-tunneling-current features were observed which were attributed to the low-dimensional localization effect. Some current peaks only appeared in positive voltage for sample due to the non-uniformity of the QDs in the structure. (C) 2002 Elsevier Science B.V. All rights reserved.
Resumo:
We have proposed a new superluminescent diodes (SLD) aimed at wide spectrum-quantum dot superluminescent diodes (QD-SLD), which is characterized by the introduction of a self-assembled asymmetric quantum dot pairs active region into conventional SLID structure. We investigated the structure and optical properties of a bilayer sample with different InAs deposition amounts in the first and second layer. We find that the structure of a self-assembled asymmetric quantum dot pairs can operate up to a 150 nm spectral width. In addition, as the first QDs' density can modulate the density of the QDs on the second layer, due to relatively high QDs density of the first layer, we can get the strong PL intensity from a broad range. We think that for the broad spectral width and the strong PL intensity, this structure can be a promising candidate for QW-SLD. (C) 2002 Elsevier Science B.V. All rights reserved.
Resumo:
In order to overcome the large lattice mismatch in the heteroepitaxy, a new patterned compliant substrate method has been introduced, which has overcome the disadvantages of previously published methods. InP film of thickness 800 nm was directly grown on this substrate. Scanning electron microscopy (SEM) has shown that good surface morphology has been obtained. In addition, Photoluminescence (PL) and double crystal X-ray diffraction (DCXRD) study have shown that the residual strain has been reduced, and that the structure quality has been improved. (C) 2002 Elsevier Science B.V. All rights reserved.
Resumo:
本文系统研究了长白山昆虫种类、多样性及对森林生态系统健康的影响,研究结果如下:1、长白山已知名的昆虫有26目、209科、1162属、1960种,其中森林害虫有11目、105科、885种,重要的森林害虫638种,隶属6目、63科。2、不同海拔森林内,昆虫种的多度、优势类群属种数不同;在阔叶红松林中最高,在亚高山岳桦林中最低。3、森林昆虫群落中植食性昆虫类群的多样性指数最大,为2.921,其次为寄生性类群1.243,捕食类群最小为1.123。天敌昆虫群落中以捕食性类群的种数占比重最大。4、植物群落物种丰富度指数与植食性昆虫丰富度指数呈负相关,而与捕食性天敌昆虫丰富度指数呈正相关;寄生性天敌的丰富度指数却与植物群落丰富度指数呈负相关。植物群落的多样性指数与捕食性、寄生性天敌的多样性指数呈正相关,而与植食性昆虫的多样性指数呈负相关,这表明昆虫的多样性影响植物群落的多样性。5、皆伐迹地的害虫多样性比择伐迹地的高,在类群上也明显不同,表明择伐形式对森林生态系统的健康维持更为有利。6、长白山共有森林鸟200余种,对自然控制森林害虫,维持生态系统健康起到了积极作用。7、森林昆虫可以作为指示物种评价森林生态系统健康,特别是稀有种和重要害虫的发生数量。
Resumo:
Blends of a poly(ether sulfone) (PES) and a polycarbonate (PC) were prepared by melt-mixing and were studied by tensile tests, differential scanning calorimetry, dynamic mechanical analysis, density measurements and transmission electron microscopy (TEM). The blends were found to be two-phase systems and an interfacial layer was presumed to be formed between two phases, which was verified by TEM. A synergism of elongation at break and tensile modulus was shown in PES/PC blends. The effects of the crosshead speed on the mechanical properties were discussed for blends with different PES/PC weight ratios.
Resumo:
Langmuir-Blodgett (LB) monolayers of hexadecyl trimethyl ammonium bromide (HTAB) were deposited onto a carbon steel surface to investigate the inhibition of corrosion by measurement of the polarization resistance and cyclic voltammetry. The corrosion proc
Resumo:
Contiene: En la modalidad A: Primer premio: CEIP La Paz, de Albacete; Dos segundos premios ex aequo: CEIP Manuel Bartolomé Cossío, de Madrid y la Sociedad Cooperativa de Enseñanza “Colegio Vizcaya”, de Zamudio (Vizcaya); Tercer premio: CRA Llanos de Moraña, de San Pedro del Arroyo (Ávila). En la modalidad B: Primer premio: IES Infante Don Juan Manuel, de Murcia; Segundo premio: IES Miguel Catalán, de Coslada (Madrid); Tercer premio: IES Carlinda, de Málaga. En la modalidad C: Primer premio: Real Escuela Superior de Arte Dramático, de Madrid; Segundo premio: Escuela de Arte, de Granada; Tercer Premio: Conservatorio Profesional de Música, de Almendralejo (Badajoz)
Resumo:
A correlation between the physicochemical properties of mono- [Li(I), K(I), Na(I)] and divalent [Cd(II), Cu(II), Mn(II), Ni(II), Co(II), Zn(II), Mg(II), Ca(II)] metal cations and their toxicity (evaluated by the free ion median effective concentration. EC50(F)) to the naturally bioluminescent fungus Gerronema viridilucens has been studied using the quantitative ion character activity relationship (QICAR) approach. Among the 11 ionic parameters used in the current study, a univariate model based on the covalent index (X(m)(2)r) proved to be the most adequate for prediction of fungal metal toxicity evaluated by the logarithm of free ion median effective concentration (log EC50(F)): log EC50(F) = 4.243 (+/-0.243) -1.268 (+/-0.125).X(m)(2)r (adj-R(2) = 0.9113, Alkaike information criterion [AIC] = 60.42). Additional two- and three-variable models were also tested and proved less suitable to fit the experimental data. These results indicate that covalent bonding is a good indicator of metal inherent toxicity to bioluminescent fungi. Furthermore, the toxicity of additional metal ions [Ag(I), Cs(I), Sr(II), Ba(II), Fe(II), Hg(II), and Pb(II)] to G. viridilucens was predicted, and Pb was found to be the most toxic metal to this bioluminescent fungus (EC50(F)): Pb(II) > Ag(I) > Hg(I) > Cd(II) > Cu(II) > Co(II) Ni(II) > Mn(II) > Fe(II) approximate to Zn(II) > Mg(II) approximate to Ba(II) approximate to Cs(I) > Li(I) > K(I) approximate to Na(I) approximate to Sr(II)> Ca(II). Environ. Toxicol. Chem. 2010;29:2177-2181. (C) 2010 SETAC