Cotton root and shoot growth as affected by application of mepiquat chloride to cotton seeds

Estudou-se o efeito do tratamento de sementes de algodão com cloreto de mepiquat sobre o crescimento inicial de raízes e parte aérea. O experimento, realizado em casa de vegetação, utilizou vasos de PVC adaptados com uma parede frontal de vidro e os tratamentos foram constituídos por cinco doses do cloreto de mepiquat (CM) do ingrediente ativo (i.a.): 0, 3, 6, 9 e 12 g kg-1 de sementes, pulverizado sobre as sementes, e a cultivar FM 993. Massa de matéria seca da parte aérea (folhas, pecíolos e haste), massa de matéria seca da raiz, área foliar, relação parte aérea:raiz, relação área foliar:crescimento radicular, o comprimento da parte aérea foram avaliados aos 21 dias após a semeadura. Crescimento radicular foi avaliado a cada três dias até os 18 dias. O CM aplicado às sementes do algodão promove redução da altura da planta e da área foliar, sem, contudo, afetar produção de massa de matéria seca da parte aérea e raiz, relação parte aérea:raiz, relação área foliar:crescimento radicular e comprimento total de raízes do algodoeiro. Assim, no presente experimento não foi observado efeito negativo do CM aplicado às sementes do algodoeiro na absorção de água pela planta.

Seletividade do oxyfluorfen para a cultura do pinhão-manso

Realizou-se um experimento para avaliar a seletividade do oxyfluorfen para a cultura do pinhão-manso. Foi utilizado o delineamento experimental inteiramente casualizado, com cinco repetições, em esquema fatorial 2 x 2 + 1, sendo duas doses do herbicida (600 e 1.200 g ha-1 do ingrediente ativo), dois modos de aplicação (sobre a planta e sobre o solo) e uma testemunha sem aplicação do herbicida. Após o transplante das mudas para vasos plásticos com 10 litros de solo, os tratamentos foram aplicados com o auxílio de um balde. O oxyfluorfen, quando aplicado sobre as plantas, mostrou-se tóxico nas duas doses testadas, sendo observados sintomas mais intensos nos primeiros dias após a aplicação dos tratamentos. Após esse período, as mudas recuperaram o vigor e surgiram novas brotações que não apresentavam sintomas de toxicidade. Esses sintomas consistiram de manchas esbranquiçadas nas folhas, que evoluíram para necrose. Nas mudas em que o herbicida foi aplicado no solo, não foram observados sintomas visuais de toxicidade. Observou-se redução na massa fresca e seca das folhas quando 600 g ha-1 do herbicida foram aplicados sobre a planta ou 1.200 g ha-1 sobre o solo. Contudo, a área foliar e o número de folhas não diferiram significativamente entre as doses utilizadas e os modos de aplicação. Das quatro espécies daninhas semeadas (Brachiaria decumbens, Brachiaria plantaginea, Sida rhombifolia e Bidens pilosa), apenas Bidens pilosa não foi controlada pelo oxyfluorfen aplicado em pré-emergência.

Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural

The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of impurity. It has good durability and mechanical strength to compression, low cost, making it one of the mainly used materials in civil engineering. The incorporation of many industrial activities residue to ceramic products is a technological alternative for reducing the environmental impact caused by its carefree disposal. This incorporation can promote chemical change and inertness of metals from residue, by fixation in the glassy phase of ceramic during the burning stage. The main aim of this project is to study the technical feasibility of the addition of ceramic oven ash into formulations of mass for structural ceramics. In this project two kinds of clay (plastic and non-plastic) were used, as well as the ash from firewood used in the process of burning of structural ceramics. A group of experiments was outlined, which permitted the evaluation of the influence of the burning cycle in different temperatures of the ash content in formulations for ceramic blocks through technological properties, mechanical behavior and microstructure. Five samples were processed of each one of the masses of plastic and non-plastic clay without addition of ash and with addition of ash on the percentages of 10 % and 20 %, for temperatures of 850 °C, 950 °C, 1050 °C and 1150 °C, obtained through sinterization process. Among the studied compositions, the one which presented best performance was the mass of clay with 10 % of ash, at temperature of 1150 °C, with the smallest absorption of water, the smallest apparent porosity, specific apparent mass a bit over the others and greatest mechanical resistance to flexion. The composition made confirmed the technical feasibility of the use of ash in the mass for structural ceramics with maintenance of its necessary characteristics for its purposes

The field resistance of potato cultivars to foliar late blight and its relationship with foliage maturity type and skin type in Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Crescimento aéreo e radicular de arroz de terras altas em função da adubação fosfatada e bioestimulante

The use of plant regulators that stimulate root growth can increase phosphorus uptake by upland rice. The objective of this study was to evaluate shoot and root growth of upland rice fertilized with different phosphorus doses with and without biostimulant. The experiment was carried out in greenhouse in the Faculdade de Ciencias Agronomicas-UNESP, in Botucatu-SP. The treatments consisted of six phosphorus doses applied in sowing (0, 12,5, 25, 50, 100 and 200 mg dm(-3)), with and without Stimulate (R) applied in the seeds (cv. Primavera). The plants were grown for 78 days and then cut at soil level to evaluate leaf area and leaves and collar dry matter. Root samples that were harvested on the same day had their root diameter and dry matter evaluated. The experimental design was the completely randomized, with three replications, arranged as a factorial 2x6. Variance analysis and regression were used to data evaluation. Linear and quadratic equations were adjusted at a probability level of 5%, using those with higher determination coefficient (R(2)). The increase on the phosphorus dose contributed to the lower matter production and leaf area of the plants when the biostimulant was applied. For shoot phosphorus accumulation and root evaluations, the same behavior was observed. It was concluded that the use of Stimulate (R) in seeds, for fitomass production or root system evaluation, was only efficient in low phosphorus doses.

Response of wheat to foliar application of zinc

Wheat is grown in Brazil, mostly in no-till, a system in which the zinc can become potentially deficient, due to excessive application of acidity corrective and phosphate fertilizers in surface and, or at shallow depths. This study aimed to evaluate the effect of foliar application of zinc in agronomic characteristics and yield of wheat. The experimental design was randomized blocks with five replications. Treatments consisted of four doses of zinc (0, 54, 108 and 216g ha(-1) Zn), divided into two foliar applications, the first at tillering (18 days after plant emergence) and the second at the boot stage (65 days after emergence). Foliar application of zinc increased the number of fertile tillers and yield of wheat, however, have little effect on the agronomic characteristics of no-tilled crop with high nutrient content in soil.

Alterações morfológicas foliares em cultivares de cana-de-açúcar em resposta à deficiência hídrica

The aim of this study was to determine the response of morphological traits of four tolerant and susceptible sugarcane cultivars (SP81-3250, SP83-2847, RB855453 and RB72454) related to two water regimes. At 84 days after emergence the plants were submitted to water availability treatments (no water deficiency and water deficiency), and evaluated in three periods: zero, 28 and 56 days, after implantation of these treatments (DAT). The cultivars SP81-3250 and SP83-2847, when subjected to water stress for prolonged periods in early development, present higher leaf width, less damage to the green leaf number and leaf area, an increase in stomatal density in adaxial and abaxial leaf surface, and higher production of dry matter, and therefore were considered tolerant. The leaf +3 length not allowed to characterize the varieties to drought tolerance.

Modelagem numérica de escoamento em padrão anular com transferência de calor e massa

Annular flow is the prevailing pattern in transport and energy conversion systems and therefore, one of the most important patterns in multiphase flow in ducts. The correct prediction of the pressure gradient and heat transfer coefficient is essential for optimizing the system s capacity. The objective of this work is to develop and implement a numerical algorithm capable of predicting hydrodynamic and thermal characteristics for upflow, vertical, annular flow. The numerical algorithm is then complemented with the physical modeling of phenomena that occurs in this flow pattern. These are, turbulence, entrainment and deposition and phase change. For the development of the numerical model, axial diffusion of heat and momentum is neglected. In this way the time-averaged equations are solved in their parabolic form obtaining the velocity and temperature profiles for each axial step at a time, together with the global parameters, namely, pressure gradient, mean film thickness and heat transfer coefficient, as well as their variation in the axial direction. The model is validated for the following conditions: fully-developed laminar flow with no entrainment; fully developed laminar flow with heat transfer, fully-developed turbulent flow with entrained drops, developing turbulent annular flow with entrained drops, and turbulent flow with heat transfer and phase change

Estudo de formulação de massa para aplicação em placas cerâmicas

The sector of civil construction is strongly related to the red ceramic industry. This sector uses clay as raw material for manufacturing of various products such as ceramic plates. In this study, two types of clay called clay 1 and clay 2 were collected on deposit in Ielmo Marinho city (RN) and then characterized by thermogravimetric analysis (TG/DTG), differential thermal analysis (DTA), X-ray diffraction (XRD), X-ray fluorescence (XRF), rational analysis and particle size distribution and dilatometric analyses. Ceramic plates were manufactured by uniaxial pressing and by extrusion. The plates obtained by pressing were produced from the four formulations called 1, 2, 3 and 4, which presented, respectively, the following proportions by mass: 66.5% clay 1 and 33.5% clay 2, 50% clay 1 and 50% clay 2, 33.5% clay 1 and 66.5% clay 2, 25% clay 1 and 75% clay 2. After firing at 850, 950 and 1050 °C with heating rate of 10 °C/min and soaking time of 30 minutes, the following technological properties were determined: linear firing shrinkage, water absorption, apparent porosity, apparent specific mass and tensile strength (3 points). The formulation containing 25% clay 1 produced plates with most satisfactory results of water absorption and mechanical resistance, because of that it was chosen for manufacturing plates by extrusion. A single firing cycle was established for these plates, which took place as follow: heating rate of 2 °C/min up to 600 ºC with soaking time of 60 minutes, followed by heating using the same rate up to 1050 ºC with soaking time of 30 minutes. After this cycle, the same technological properties investigated in the plates obtained by pressing were determined. The results indicate (according to NRB 13818/1997) that the plates obtained by pressing from the mixture containing 25 wt% clay 1, after firing at 1050 °C, reach the specifications for semi-porous coating (BIIb). On the other hand, the plates obtained by extrusion were classified as semi-stoneware (group AIIa)

Importância do fluxo de massa e difusão no suprimento de potássio ao algodoeiro como variável de água e potássio no solo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência do etil-trinexapac no acúmulo, na distribuição de nitrogênio (15N) e na massa de grãos de arroz de terras altas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diagnóstico de descarga de cátodo oco de ar e pós-descarga Ar N2 por espectroscopia de emissão óptica e espectrometria de massa

Many applications require that the plasma discharge is produced apart from the surface to be processed, thus preventing damage caused by bombardment and/or plasma radiation. In the post-discharge regime in various applications thermally sensitive materials can be used. In this work, active species produced by discharge and post-discharge hollow cathode were diagnosed by optical emission spectroscopy and mass spectrometry. The discharge was produced with the gases Ar and Ar - N2 gas flow ranging from 1 to 6 cm3/min and electric current between 150 to 600 mA. It was estimated that the ion density inside the hollow cathode, with 2 mm diameter ranged between 7.71 and 14.1 x 1015 cm-3. It was observed that the gas flow and the electric current changes the emission intensity of Ar and N2 species. The major ionic species detected by quadrupole mass spectrometry were Ar+ and N2+. The ratio of optical emission intensities of N2(1 +)/Ar(811 nm) was related to the partial pressure of N2 after the hollow cathode discharge at low pressure

Aplicação foliar de molibdênio, produtividade e qualidade fisiológica de sementes de feijoeiro irrigado

O objetivo deste trabalho foi avaliar o efeito de doses e épocas de aplicação de molibdênio, por via foliar, na produtividade e qualidade fisiológica de sementes do feijoeiro Pérola irrigado, cultivado em Neossolo Quatizarênico. Os tratamentos foram constituídos pela aplicação de quatro doses de Mo (0, 40, 80 e 160 g ha-1), aplicadas em duas épocas: 15 ou 26 dias após a emergência das plântulas (DAE). A aplicação de Mo via foliar aumentou a produtividade de sementes e a matéria seca da parte aérea de plântulas do feijoeiro irrigado, cultivado em solo arenoso, independentemente da época de aplicação (15 ou 26 DAE). A germinação das sementes do feijoeiro foi aumentada pela aplicação de Mo aos 26 DAE. Na avaliação do vigor das sementes de feijão, pelo teste de primeira contagem, constatou-se efeito negativo da aplicação de Mo via foliar. A aplicação foliar de Mo aumentou a produtividade do feijoeiro e promoveu a obtenção de sementes que originaram plântulas com maior desenvolvimento inicial.

pH foliar e deposição de gotas de pulverização em plantas daninhas aquáticas: Brachiaria mutica, Brachiaria subquadripara e Panicum repens

A diversidade morfológica da superfície foliar existente entre as espécies de plantas e a presença de estruturas foliares, como tricomas, estômatos, cutícula e ceras, podem exercer grande influência na aderência e deposição das gotas de pulverização, assim como na absorção do herbicida. Dessa forma, o objetivo do presente trabalho foi estudar, em plantas daninhas aquáticas emersas (Brachiaria mutica, Brachiaria subquadripara e Panicum repens), o pH foliar, bem como a área de molhamento de gotas de pulverização na superfície foliar adaxial e abaxial. O experimento foi conduzido no Núcleo de Pesquisas Avançadas em Matologia - NUPAM, pertencente à Faculdade de Ciências Agronômicas de Botucatu/SP - UNESP. As plantas foram cultivadas em caixas d'água no campo, quando elas atingiram seu pleno desenvolvimento (antes do florescimento), foram feitas as avaliações de pH foliar e da área de molhamento de gotas de pulverização. As tensões superficiais das gotas depositadas (0,5 µL), apresentadas pelas soluções de glyphosate aplicado isoladamente (5,0% v v-1, Rodeo 480g L-1 e.a. - produto comercial), glyphosate + Aterbane BR (5,0% + 0,5% v v-1), glyphosate + Silwet L-77 (5,0% + 0,05% v v-1), além das soluções com os adjuvantes isolados, Aterbane BR (0,5% v v-1) e Silwet L-77 (0,05% v v-1), foram respectivamente de 72,1; 28,7; 23,3; 37,3; e 22,1 mN m-1. As médias obtidas de pH foliar variaram entre 5,71 e 6,03, destacando-se a espécie B. mutica, com valores de 5,72 e 6,03 para as faces adaxial e abaxial, respectivamente. Contudo, mais estudos devem ser realizados para verificar a influência do pH foliar na absorção de herbicidas por espécies daninhas aquáticas. Das plantas daninhas aquáticas avaliadas, B. subquadripara foi a espécie que obteve as maiores médias de área de molhamento nas faces adaxial e abaxial da folha, proporcionadas pelas soluções de glyphosate + Aterbane BR, glyphosate + Silwet L-77 e Silwet L-77, com valores de 6,44 - 4,36; 7,77 - 10,59; e 10,94 - 10,28 mm², respectivamente.