Independence, Global analysis, and parallelism, in dinamically scheduled constraint logic programming.

El punto de vista de muchas otras aplicaciones que modifican las reglas de computación. En segundo lugar, y una vez generalizado el concepto de independencia, es necesario realizar un estudio exhaustivo de la efectividad de las herramientas de análisis en la tarea de la paralelizacion automática. Los resultados obtenidos de dicha evaluación permiten asegurar de forma empírica que la utilización de analizadores globales en la tarea de la paralelizacion automática es vital para la consecución de una paralelizarían efectiva. Por último, a la luz de los buenos resultados obtenidos sobre la efectividad de los analizadores de flujo globales basados en la interpretación abstracta, se presenta la generalización de las herramientas de análisis al contexto de los lenguajes lógicos restricciones y planificación dinámica.

Energetic performance of landfill and digester biogas in a domestic cooker

The energetic performance of landfill biogas (LB) and biodigester biogas (BB) from municipal waste was examined in consumption tests. These tests were performed in situ at a gas generation plant associated with a landfill facility in Madrid (Spain) and following the standard UNE-EN 30-2-1 (1999). The jets of a domestic cooker commonly used for natural gas (NG) or liquefied petroleum gas (LPG) were modified to operate with the biogases produced at the facility. The working pressures best suited to the tested gases, i.e., to avoid flashback and flame lift, and to ensure the stability and correct functioning of the flame during combustion, were determined by trial and error. Both biogases returned optimum energetic performance for the transfer of heat to water in a metallic recipient (as required by the above standard) at a supply pressure of 10 mbar. Domestic cookers are normally supplied with NG at a pressure of 20 mbar, at which pressure the energetic performance of G20 reference gas was higher than that of both biogases (52.84% compared to 38.06% and 49.77% respectively). Data concerning these issues involving also unexplored feedstock are required for the correct conversions of domestic cookers in order to avoid risks of serious personal injuries or property damages.

Influencia de las restricciones medioambientales en el sector eléctrico

El objetivo de esta tesis es la caracterización de la generación térmica representativa de la existente en la realidad, para posteriormente proceder a su modelización y simulación integrándolas en una red eléctrica tipo y llevar a cabo estudios de optimización multiobjetivo económico medioambiental. Para ello, en primera instancia se analiza el contexto energético y eléctrico actual, y más concretamente el peninsular, en el que habiendo desaparecido las centrales de fuelóleo, sólo quedan ciclos combinados y centrales de carbón de distinto rango. Seguidamente se lleva a cabo un análisis de los principales impactos medioambientales de las centrales eléctricas basadas en combustión, representados sobre todo por sus emisiones de CO2, SO2 y NOx, de las medidas de control y mitigación de las mismas y de la normativa que les aplica. A continuación, a partir de las características de los combustibles y de la información de los consumos específicos, se caracterizan los grupos térmicos frente a las funciones relevantes que definen su comportamiento energético, económico y medioambiental, en términos de funciones de salida horarias dependiendo de la carga. Se tiene en cuenta la posibilidad de desnitrificación y desulfuración. Dado que las funciones objetivo son múltiples, y que están en conflicto unas con otras, se ha optado por usar métodos multiobjetivo que son capaces de identificar el contorno de puntos óptimos o frente de Pareto, en los que tomando una solución no existe otra que lo mejore en alguna de las funciones objetivo sin empeorarlo en otra. Se analizaron varios métodos de optimización multiobjetivo y se seleccionó el de las ε constraint, capaz de encontrar frentes no convexos y cuya optimalidad estricta se puede comprobar. Se integró una representación equilibrada de centrales de antracita, hulla nacional e importada, lignito y ciclos combinados en la red tipo IEEE-57, en la que se puede trabajar con siete centrales sin distorsionar demasiado las potencias nominales reales de los grupos, y se programó en Matlab la resolución de flujos óptimos de carga en alterna con el método multiobjetivo integrado. Se identifican los frentes de Pareto de las combinaciones de coste y cada uno de los tres tipos de emisión, y también el de los cuatro objetivos juntos, obteniendo los resultados de costes óptimos del sistema para todo el rango de emisiones. Se valora cuánto le cuesta al sistema reducir una tonelada adicional de cualquier tipo de emisión a base de desplazarse a combinaciones de generación más limpias. Los puntos encontrados aseguran que bajo unas determinadas emisiones no pueden ser mejorados económicamente, o que atendiendo a ese coste no se puede reducir más allá el sistema en lo relativo a emisiones. También se indica cómo usar los frentes de Pareto para trazar estrategias óptimas de producción ante cambios horarios de carga. ABSTRACT The aim of this thesis is the characterization of electrical generation based on combustion processes representative of the actual power plants, for the latter modelling and simulation of an electrical grid and the development of economic- environmental multiobjective optimization studies. In this line, the first step taken is the analysis of the current energetic and electrical framework, focused on the peninsular one, where the fuel power plants have been shut down, and the only ones remaining are coal units of different types and combined cycle. Then it is carried out an analysis of the main environmental impacts of the thermal power plants, represented basically by the emissions of CO2, SO2 y NOx, their control and reduction measures and the applicable regulations. Next, based on the combustibles properties and the information about the units heat rates, the different power plants are characterized in relation to the outstanding functions that define their energy, economic and environmental behaviour, in terms of hourly output functions depending on their load. Optional denitrification and desulfurization is considered. Given that there are multiple objectives, and that they go in conflictive directions, it has been decided the use of multiobjective techniques, that have the ability of identifying the optimal points set, which is called the Pareto front, where taken a solution there will be no other point that can beat the former in an objective without worsening it in another objective. Several multiobjective optimization methods were analysed and pondered, selecting the ε constraint technique, which is able to find no convex fronts and it is opened to be tested to prove the strict Pareto optimality of the obtained solutions. A balanced representation of the thermal power plants, formed by anthracite, lignite, bituminous national and imported coals and combined cycle, was integrated in the IEEE-57 network case. This system was selected because it deals with a total power that will admit seven units without distorting significantly the actual size of the power plants. Next, an AC optimal power flow with the multiobjective method implemented in the routines was programmed. The Pareto fronts of the combination of operative costs with each of the three emissions functions were found, and also the front of all of them together. The optimal production costs of the system for all the emissions range were obtained. It is also evaluated the cost of reducing an additional emission ton of any of the emissions when the optimal production mix is displaced towards cleaner points. The obtained solutions assure that under a determined level of emissions they cannot be improved economically or, in the other way, at a determined cost it cannot be found points of lesser emissions. The Pareto fronts are also applied for the search of optimal strategic paths to follow the hourly load changes.

An accurate model for simulating energetic behavior of PV grid connected inverters

This paper proposes a new model for characterizing the energetic behavior of grid connected PV inverters. The model has been obtained from a detailed study of main loss processes in small size PV inverters in the market. The main advantage of the used method is to obtain a model that comprises two antagonistic features, since both are simple, easy to compute and apply, and accurate. One of the main features of this model is how it handles the maximum power point tracking (MPPT) and the efficiency: in both parts the model uses the same approach and it is achieved by two resistive elements which simulate the losses inherent to each parameter. This makes this model easy to implement, compact and refined. The model presented here also includes other parameters, such as start threshold, standby consumption and islanding behavior. In order to validate the model, the values of all the parameters listed above have been obtained and adjusted using field measurements for several commercial inverters, and the behavior of the model applied to a particular inverter has been compared with real data under different working conditions, taken from a facility located in Madrid. The results show a good fit between the model values and the real data. As an example, the model has been implemented in PSPICE electronic simulator, and this approach has been used to teach grid-connected PV systems. The use of this model for the maintenance of working PV facilities is also shown.

Artefactos energéticos : de Fuller a Piñero (1961-1972) = Energetic artefacts : from Fuller to Piñero (1961-1972)

La obra de Emilio Pérez Piñero que se desarrolla entre los años 1961 y 1972 año en el que muere en un accidente de tráfico volviendo de Figueras, se centra principalmente en artefactos desplegables y desmontables, ejecutando prototipos que en el presente trabajo se han dividido en dos grupos; la cúpula reticular y la infraestructura. No pudo por tanto acudir al Congreso de 1972 de la UIA a recoger el premio Auguste Perret a la innovación tecnológica, que en años anteriores habían recibido Félix Candela, Jean Prouvé, Hans Scharoun o Frei Otto, y que en aquella ocasión tuvo que recoger su viuda. Parámetros como el de la movilidad, indeterminación, intercambiabilidad, obsolescencia y otros que se analizan en el presente trabajo, aparecen a lo largo de toda su obra ya que muchos de sus artefactos están ubicados en no-lugares y tienen un carácter itinerante y por tanto se hace indispensable su rápido montaje y desmontaje, que unas veces se resuelve mediante la desmontabilidad y otras con la plegabilidad de éstos. Aunque pueda parecer Piñero una figura autárquica, lo cierto es que durante la década donde concentra su trabajo se produce una explosión en torno a al arquetipo que será denominado de forma genérica `artefacto´, ligado conceptualmente a los parámetros que aquí se definen. Entendemos artefacto como objeto material realizado por una o varias personas para cumplir una función, es sinónimo de máquina y aparato y deriva de las palabras latinas ars o artis (técnica) y facto (hecho), para designar a los objetos cuya fabricación requiere alguna destreza. El término latino `ars´ engloba a las técnicas y a las artes, lo que no ocurre con el término castellano arte que deriva de él. Los movimientos utópicos que comparte la década con Piñero, utilizan el arquetipo infraestructural, ligero y high tech, para a través de una arquitectura más ligada a la ciencia ficción, realizar una crítica al Movimiento Moderno institucionalizado, todos ellos comparten cierta obsesión por la movilidad, ligada ésta a la idea de espacio flexible, dinámico, nómada. Este concepto de neo-nomadismo, que representa un habitar dinámico, aglutina las nuevas formas de vivir donde la movilidad social y geográfica son habituales. El nomadismo, por otra parte se entiende como sinónimo de democracia y libertad. La arquitectura pasa de ser pesada, estática, permanente a ser un elemento dinámico en continuo movimiento. A veces con connotaciones biológicas se asimilan los artefactos a organismos vivos y les confieren dichas propiedades de crecimiento y autonomía energética, acumulándose en torno a megaestructuras, donde quedan `enchufados´. En este intento de dotar movilidad a lo inmueble, se buscan estructuras vivas y modificables que crecen en una asimilación de las leyes naturales utilizando los parámetros de metamorfosis, simbiosis y cambio. Estos movimientos de vanguardia tienen también ciertas connotaciones políticas y sociales basadas en la libertad y la movilidad y reniegan del consumismo institucionalizado, de la arquitectura como instrumento de consumo, como objeto de usar en la cultura de masas. El carácter político de la autogestión, de la customización como parámetro proyectual, de la autosuficiencia energética, que anticipa la llegada de la crisis energética del año 1973. Objeto de este trabajo será relacionar los conceptos que aparecen fuertemente en el entorno de la década de los años sesenta del siglo XX, en el trabajo de Emilio Pérez Piñero. Parámetros encontrados como conceptos en los grupos de vanguardia y utopía a su vez fuertemente influenciados por las figuras del ingeniero Richard Buckminster Fuller y del arquitecto Konrad Wachsmann. Se analizará que posible influencia tiene la obra de Fuller, principalmente el prototipo denominado cúpula reticular, en la obra de Pérez Piñero y sus coetáneos analizando sus pensamientos teóricos en torno a parámetros como la energía, principalmente en las teorías relativas a Synergetics. El término inventado por Richard B. Fuller es una contracción de otro más largo que en inglés agrupa tres palabras; synergetic-energetic geometry. La definición de sinergia es la cooperación, es decir es el resultado de la acción conjunta de dos o más causas, pero con un efecto superior a la suma de estas causas. El segundo término, energetics geometry, que traducido sería geometría energética hace referencia en primer lugar a la geometría; ya que desarrolla el sistema de referencia que utiliza la naturaleza para construir sus sistemas y en segundo lugar a la energía; ya que además debe ser el sistema que establezca las relaciones más económicas utilizando el mínimo de energía. Por otro lado se analiza la repercusión del prototipo denominado Infraestructura, término acuñado por Yona Friedman y basado estructuralmente y conceptualmente en los desarrollos sobre grandes estructuras de Konrad Wachsmann. El arquitecto alemán divulga su conocimiento en seminarios impartidos por todo el mundo como el que imparte en Tokio y se denomina Wachsmann´s Seminar donde participan algunos de los componentes del grupo Metabolista que sorprenderán al mundo con sus realizaciones en la exposición de Osaka de 1970. El intervalo temporal entre 1961 hasta 1972 hace referencia a la horquilla donde Pérez Piñero realiza su obra arquitectónica, que comienza en 1961 cuando gana el concurso convocado en Londres por la UIA (Unión Internacional de Arquitectos) con el proyecto conocido como Teatro Ambulante, hasta 1972 que es cuando fallece volviendo de Figueras donde está realizando dos encargos de Salvador Dalí; la cubrición del escenario del futuro Teatro-Museo Salvador Dalí y la Vidriera Hipercúbica que debía cerrar la boca de tal escenario. Bajo el título de `Artefactos energéticos. De Fuller a Piñero (1961-1972)´, se presenta esta Tesis doctoral, que tiene la intención de vincular la obra de Emilio Pérez Piñero con la de las neo vanguardias producidas por una serie de arquitectos que operan en el ámbito internacional. Estas vinculaciones se producen de una forma general, donde a través de una serie de estrategias según la metodología que posteriormente se describe se buscan relaciones de la obra del autor español con algunos de los movimientos más significativos que aparecen en dicha década y de manera específica estableciendo relaciones con las obras y pensamientos de los autores que pertenecen a estos movimientos y donde estas relaciones se hacen más evidentes. El objeto del presente trabajo es analizar y explicar la obra del arquitecto Emilio Pérez Piñero, que espacialmente se localiza en el territorio español, desde el punto de vista de estos movimientos para posteriormente poder determinar si existen puntos en común y si el arquitecto español no solo comparte la década temporalmente sino también conceptualmente y por tanto utiliza el ideario que utilizan sus coetáneos que forman parte de las neovanguardias de los años sesenta de siglo XX. ABSTRACT ABSTRACT The Work of Emilio Perez Piñero was developed between the years 1961 and 1972 when he died in a car accident coming back from Figueres, where he was building a geodesic dome to close the building that enclose the Dali’s museum. All his Work is mainly centered in artifact that could be collapsible and removable, taking the two prototypes that are described in this work as a recurrent element in all his creation. These are the reticular dome and the infrastructure that are very influenced by the work from Richard B. Fuller and Konrad Wachsmann. Emilio Pérez Piñero could not receive the Auguste Perret Prize in 1972 awarded by the UIA that years before have received architects as Felix Candela, Jean Prouvé, Hans Scharoun or Frei Otto, and this time Pérez Piñero´s wife will accept it because of his death. Parameters like mobility, changeability, expendability, indetermination and others appear currently in his Work. All the inventions that Piñero had been patented and all of the artifacts that he created are usually located in no-places, because they do have a shifting identity. This kind of building has to be quickly set on site, and this problem has to be solved in term of foldability or demounting. In the decade where his work focuses, an explosion has occurred around this archetype to be generally called artifact that is usually linked to mobility. We understand artifact as a material object made by one or more people to work in a particular way. It is sometimes equated with the terms machinery and apparatus and it is derived from the Latin word `ars´ or `artis´, what means techniques and `facto´ (fact). And we use this term to refer to objects whose manufacture requires the same skill, in fact the Latin word `ars´ covers the techniques and arts, which does not occur with the Castillan term `arte´ that derives from it and means only art. The term neo-nomadic is a relatively new name used for a dynamic life, commonly referred to new forms of life where social and geographical mobility are common. On the other hand nomadic could be understood as a synonymous for democracy and freedom. The architecture is not going to be hard and static anymore but a dynamic element in the move. The Neo-avant-garde movement that shares the decade with Piñero uses this infrastructural archetype, which is light and high-tech, to criticize the institutionalized Modern Movement through architecture linked to science fiction. They all share an obsession with mobility, a concept that is connected to the terms `dynamic´, `nomadic´, `flexibile´, etc. Sometimes, with biological connotations, the utopian assimilate the artifacts to living organisms and give them these properties of growth and energy autonomy, and they apparently grow around megastructures where they are plugged. In this attempt to provide mobility to the inertness, living structures and possibility of change are sought in order to make them grow like a living organism and to assimilate the natural laws of growth. According to a definition from architecture provided by Fernández- Galiano who calls it `exosomatic artifact´, he understand architecture as artifact of the human environment that regulates natural energy flows and channels the energy stored in fuels for the benefit of living beings that inhabit. It is also true that during the sixties a new environmental awareness in public opinion is formed and that is due to the exploitation and disproportionate use of energy resources, acceleration of technological processes and mass consumption. Consequently a new concept is born: energy autonomy, it is very close to rational use of natural energy. Such a concept will be culturally assimilated with the requirement of independence not only in the management but also in the building construction until we arrive at energy autonomy. The individuals become energy consumer, which in turn can enter the energy produced in the system to `life in an eco-mode way´. The objectives of this research are analyzing all of these parameters and concepts that are coming into view in the surrounding of the decade and relate them with the Work of Pérez Piñero. Terms strongly present in the avant-garde movements around the decade, a young architect’s generation strongly influenced by Richard B. Fuller and Konrad Wachsmann. However, it will be analyzed how important the influence of Buckminster Fuller's Work was and his theoretical text about energy on the Work of Pérez Piñero and his fellows of the decade. The term Synergetic was invented by Fuller and came from the words synergy and energetic geometry. Synergy is the cooperation or interaction of two or more agents to produce a greater effect than the sum of their separate effects. Energetic geometry is related to the geometries that the Nature is using to build their construction but always using low energy consumption. On the other hand, the influences from Wachsmann around the prototype called Infrastructure have been analyzed. The German architect has developed knowledge around huge structures that he has spread all around the world through seminars that he has been conducted. One of these was the Wachsmann´s seminar in Tokyo, where same of the members of the Metabolist group were taking part of. Later these young architects will surprise the world with his artifacts at the World Exposition in Osaka in 1970. Between 1961 and 1972 Pérez Piñero produced his architectural work. It began in 1961 when he received the first prize with his project Mobile Theatre in the competition organized by the UIA in London. In 1972 the Auguste Perret Prize was granted by the UIA too. He could not accept it because he died before in a car accident when he was coming from Figueres, when he was designing two projects for Dali. With the title `Energetic Artifacts. From Fuller to Piñero (1961- 1972)´, this thesis relates the Work of Emilio Pérez Piñero with the neo avant-garde made by a young architects’ generation who is sharing the time with him. Several strategies have been used to formed relationships between them. They are described in the present work to set up a method that allows us to relate the work and ideas of the architects of the neo avant-garde with the ones from Piñero. This work is intended to analyze and explained the work of Pérez Piñero from the point of view of the international architects’ generation who is operating at the same time and finally to determinate if Piñero is not sharing the time with them but the concepts, ideas and architectural parameters.

Energetic considerations of ciliary beating and the advantage of metachronal coordination

The internal mechanism of cilia is among the most ancient biological motors on an evolutionary scale. It produces beat patterns that consist of two phases: during the effective stroke, the cilium moves approximately as a straight rod, and during the recovery stroke, it rolls close to the surface in a tangential motion. It is commonly agreed that these two phases are designed for efficient functioning: the effective stroke encounters strong viscous resistance and generates thrust, whereas the recovery stroke returns the cilium to starting position while avoiding viscous resistance. Metachronal coordination between cilia, which occurs when many of them beat close to each other, is believed to be an autonomous result of the hydrodynamical interactions in the system. Qualitatively, metachronism is perceived as a way for reducing the energy expenditure required for beating. This paper presents a quantitative study of the energy expenditure of beating cilia, and of the energetic significance of metachronism. We develop a method for computing the work done by model cilia that beat in a viscous fluid. We demonstrate that for a single cilium, beating in water, the mechanical work done during the effective stroke is approximately five times the amount of work done during the recovery stroke. Investigation of multicilia configurations shows that having neighboring cilia beat metachronally is energetically advantageous and perhaps even crucial for multiciliary functioning. Finally, the model is used to approximate the number of dynein arm attachments that are likely to occur during the effective and recovery strokes of a beat cycle, predicting that almost all of the available dynein arms should participate in generating the motion.

Adenylate kinase phosphotransfer communicates cellular energetic signals to ATP-sensitive potassium channels

Transduction of energetic signals into membrane electrical events governs vital cellular functions, ranging from hormone secretion and cytoprotection to appetite control and hair growth. Central to the regulation of such diverse cellular processes are the metabolism sensing ATP-sensitive K+ (KATP) channels. However, the mechanism that communicates metabolic signals and integrates cellular energetics with KATP channel-dependent membrane excitability remains elusive. Here, we identify that the response of KATP channels to metabolic challenge is regulated by adenylate kinase phosphotransfer. Adenylate kinase associates with the KATP channel complex, anchoring cellular phosphotransfer networks and facilitating delivery of mitochondrial signals to the membrane environment. Deletion of the adenylate kinase gene compromised nucleotide exchange at the channel site and impeded communication between mitochondria and KATP channels, rendering cellular metabolic sensing defective. Assigning a signal processing role to adenylate kinase identifies a phosphorelay mechanism essential for efficient coupling of cellular energetics with KATP channels and associated functions.

Swapping structural determinants of ribonucleases: an energetic analysis of the hinge peptide 16-22.

Bovine seminal ribonuclease (BS-RNase) is a homodimeric enzyme strictly homologous to the pancreatic ribonuclease (RNase A). Native BS-RNase is an equilibrium mixture of two distinct dimers differing in the interchange of the N-terminal segments and in their biological properties. The loop 16-22 plays a fundamental role on the relative stability of the two isomers. Both the primary and tertiary structures of the RNase A differ substantially from those of the seminal ribonuclease in the loop region 16-22. To analyze the possible stable conformations of this loop in both enzymes, structure predictions have been attempted, according to a procedure described by Palmer and Scheraga [Palmer, K. A. & Scheraga, H. A. (1992) J. Comput. Chem. 13, 329-350]. Results compare well with experimental x-ray structures and clarify the structural determinants that are responsible for the swapping of the N-terminal domains and for the peculiar properties of BS-RNase. Minimal modifications of RNase A sequence needed to form a stable swapped dimer are also predicted.

Constraint qualifications in linear vector semi-infinite optimization

Linear vector semi-infinite optimization deals with the simultaneous minimization of finitely many linear scalar functions subject to infinitely many linear constraints. This paper provides characterizations of the weakly efficient, efficient, properly efficient and strongly efficient points in terms of cones involving the data and Karush–Kuhn–Tucker conditions. The latter characterizations rely on different local and global constraint qualifications. The global constraint qualifications are illustrated on a collection of selected applications.

Robust Solutions of MultiObjective Linear Semi-Infinite Programs under Constraint Data Uncertainty

The multiobjective optimization model studied in this paper deals with simultaneous minimization of finitely many linear functions subject to an arbitrary number of uncertain linear constraints. We first provide a radius of robust feasibility guaranteeing the feasibility of the robust counterpart under affine data parametrization. We then establish dual characterizations of robust solutions of our model that are immunized against data uncertainty by way of characterizing corresponding solutions of robust counterpart of the model. Consequently, we present robust duality theorems relating the value of the robust model with the corresponding value of its dual problem.

Three-dimensional planar model estimation using multi-constraint knowledge based on k-means and RANSAC

Plane model extraction from three-dimensional point clouds is a necessary step in many different applications such as planar object reconstruction, indoor mapping and indoor localization. Different RANdom SAmple Consensus (RANSAC)-based methods have been proposed for this purpose in recent years. In this study, we propose a novel method-based on RANSAC called Multiplane Model Estimation, which can estimate multiple plane models simultaneously from a noisy point cloud using the knowledge extracted from a scene (or an object) in order to reconstruct it accurately. This method comprises two steps: first, it clusters the data into planar faces that preserve some constraints defined by knowledge related to the object (e.g., the angles between faces); and second, the models of the planes are estimated based on these data using a novel multi-constraint RANSAC. We performed experiments in the clustering and RANSAC stages, which showed that the proposed method performed better than state-of-the-art methods.

Constraint qualifications in convex vector semi-infinite optimization

Convex vector (or multi-objective) semi-infinite optimization deals with the simultaneous minimization of finitely many convex scalar functions subject to infinitely many convex constraints. This paper provides characterizations of the weakly efficient, efficient and properly efficient points in terms of cones involving the data and Karush–Kuhn–Tucker conditions. The latter characterizations rely on different local and global constraint qualifications. The results in this paper generalize those obtained by the same authors on linear vector semi-infinite optimization problems.

Bertrand Competition with an Asymmetric No-discrimination Constraint. Bruges European Economic Research (BEER) 23/June 2012

Regulators and competition authorities often prevent firms with significant market power or dominant firms from practicing price discrimination. The goal of such an asymmetric no- discrimination constraint is to encourage entry and serve consumers’ interests. This constraint prohibits the firm with significant market power to practice both behaviour-based price discrimination within the competitive segment and third-degree price discrimination across the monopolistic and competitive segments. We find that this constraint hinders entry and reduces welfare when the monopolistic segment is small.

Criminal responsibility and social constraint.

Mode of access: Internet.

The rate of return, rate base methods, and the regulatory constraint /

Bibliography: leaves 18-19.