907 resultados para Glass blowing and working.


Relevância:

100.00% 100.00%

Publicador:

Resumo:

The glasses of the rosette forming the main window of the transept of the Gothic Cathedral of Tarragona have been characterised by means of SEM/EDS, XRD, FTIR and electronic microprobe. The multivariate statistical treatment of these data allow to establish a classification of the samples forming groups having an historical significance and reflecting ancient restorations. Furthermore, the decay patterns and mechanisms have been determined and the weathering by-products characterised. It has been demonstrated a clear influence of the bioactivity in the decay of these glasses, which activity is partially controlled by the chemical composition of the glasses.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In this thesis, the sorption and elastic properties of the cation-exchange resins were studied to explain the liquid chromatographic separation of carbohydrates. Na+, Ca2+ and La3+ form strong poly(styrene-co-divinylbenzene) (SCE) as well as Na+ and Ca2+ form weak acrylic (WCE) cation-exchange resins at different cross-link densities were treated within this work. The focus was on the effects of water-alcohol mixtures, mostly aqueous ethanol, and that of the carbohydrates. The carbohydrates examined were rhamnose, xylose, glucose, fructose, arabinose, sucrose, xylitol and sorbitol. In addition to linear chromatographic conditions, non-linear conditions more typical for industrial applications were studied. Both experimental and modeling aspectswere covered. The aqueous alcohol sorption on the cation-exchangers were experimentally determined and theoretically calculated. The sorption model includes elastic parameters, which were obtained from sorption data combined with elasticity measurements. As hydrophilic materials cation-exchangers are water selective and shrink when an organic solvent is added. At a certain deswelling degree the elastic resins go through glass transition and become as glass-like material. Theincreasing cross-link level and the valence of the counterion decrease the sorption of solvent components in the water-rich solutions. The cross-linkage or thecounterions have less effect on the water selectivity than the resin type or the used alcohol. The amount of water sorbed is higher in the WCE resin and, moreover, the WCE resin is more water selective than the corresponding SCE resin. Theincreased aliphatic part of lower alcohols tend to increase the water selectivity, i.e. the resins are more water selective in 2-propanol than in ethanol solutions. Both the sorption behavior of carbohydrates and the sorption differences between carbohydrates are considerably affected by the eluent composition and theresin characteristics. The carbohydrate sorption was experimentally examined and modeled. In all cases, sorption and moreover the separation of carbohydrates are dominated by three phenomena: partition, ligand exchange and size exclusion. The sorption of hydrophilic carbohydrates increases when alcohol is added into the eluent or when carbohydrate is able to form coordination complexes with the counterions, especially with multivalent counterions. Decreasing polarity of the eluent enhances the complex stability. Size exclusion effect is more prominent when the resin becomes tighter or carbohydrate size increases. On the other hand,the elution volumes between different sized carbohydrates decreases with the decreasing polarity of the eluent. The chromatographic separation of carbohydrateswas modeled, using rhamnose and xylose as target molecules. The thermodynamic sorption model was successfully implemented in the rate-based column model. The experimental chromatographic data were fitted by using only one adjustable parameter. In addition to the fitted data also simulated data were generated and utilized in explaining the effect of the eluent composition and of the resin characteristics on the carbohydrate separation.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study investigated fingermark residues using Fourier transform infrared microscopy (μ- FTIR) in order to obtain fundamental information about the marks' initial composition and aging kinetics. This knowledge would be an asset for fundamental research on fingermarks, such as for dating purposes. Attenuated Total Reflection (ATR) and single-point reflection modes were tested on fresh fingermarks. ATR proved to be better suited and this mode was subsequently selected for further aging studies. Eccrine and sebaceous material was found in fresh and aged fingermarks and the spectral regions 1000-1850 cm-1 and 2700-3600 cm-1 were identified as the most informative. The impact of substrates (aluminium and glass slides) and storage conditions (storage in the light and in the dark) on fingermark aging was also studied. Chemometric analyses showed that fingermarks could be grouped according to their age regardless of the substrate when they were stored in an open box kept in an air-conditioned laboratory at around 20°C next to a window. On the contrary, when fingermarks were stored in the dark, only specimens deposited on the same substrate could be grouped by age. Thus, the substrate appeared to influence aging of fingermarks in the dark. Furthermore, PLS regression analyses were conducted in order to study the possibility of modelling fingermark aging for potential fingermark dating applications. The resulting models showed an overall precision of ±3 days and clearly demonstrated their capability to differentiate older fingermarks (20 and 34-days old) from newer ones (1, 3, 7 and 9-days old) regardless of the substrate and lighting conditions. These results are promising from a fingermark dating perspective. Further research is required to fully validate such models and assess their robustness and limitations in uncontrolled casework conditions.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

We investigated the decayed historical church window glasses of two Catalonian churches, both under Mediterranean climate. Glass surfaces were studied by scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), and X-ray diffraction (XRD). Their chemical composition was determined by avelength-dispersive spectrometry (WDS) microprobe analysis. The biodiversity was investigated by molecular methods: DNA extraction from glass, amplification by PCR targeting the16S rRNA and ITS regions, and fingerprint analyses by denaturing gradient gel electrophoresis (DGGE). Clone libraries containing either PCR fragments of the bacterial 16S rDNA or the fungal ITS regions were screened by DGGE. Clone inserts were sequenced and compared with the EMBL database.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Tutkielman tavoitteena oli analysoida ja kehittää Lumon-yhtiöiden sisäisiä rahoitustoimintoja. Kehitettäviksi toiminnoiksi nousivat Lumon-yhtiöiden pääomarakenne, likviditeetin hallinta ja tilaus-toimitusketjun vertailu vanhan ja uuden toimintatavan välillä. Tarkastelutavaksi valittiin case-tutkimus. Tutkielman kohdeyritys Lumon-yhtiöt on teollisuusyritys, joka on erikoistunut lasi- ja alumiinirakentamiseen. Yrityksen pääomarakennetta tutkittiin haastattelemalla yrityksen johtohenkilöitä. Haastatteluiden perusteella laskettiin pääomarakenteen teorioiden mukaisia merkitseviä tekijöitä. Tuloksista havaittiin, että Lumon-yhtiöt hyötyisivät vieraan pääoman korkojen veroedusta ilman omavaraisuuden vaarantamista. Tätä ei kuitenkaan nähty tarpeelliseksi, koska rahoituksellisen joustavuuden säilyttäminen on merkitsevin pääomarakenteen tekijä. Tutkielmassa muodostettiin likviditeettiä ennustava malli, jonka avulla likviditeettiä voidaan seurata. Mallin pohjaaminen liikevaihtoennusteeseen ei täysin onnistunut, koska ennusteen tarkkuus ei ollut riittävä. Likviditeetin hallinnan osalta tutkittiin myös Lumon-yhtiöiden ulkomaisten tytäryhtiöiden kassavirtojen hallintaan liittyviä haasteita ja esitettiin niihin ratkaisuja. Tutkielmassa analysoitiin likviditeetin näkökulmasta vanhaa toimintatavan ja sitä verrattiin uuteen Lumon Express -toimintatapaan. Mittarina käytettiin käyttöpääomaa. Vertailu osoitti uuden toimintatavan pienentävän käyttöpääoman määrää 30 %.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The article discusses the development of WEBDATANET established in 2011 which aims to create a multidisciplinary network of web-based data collection experts in Europe. Topics include the presence of 190 experts in 30 European countries and abroad, the establishment of web-based teaching and discussion platforms and working groups and task forces. Also discussed is the scope of the research carried by WEBDATANET. In light of the growing importance of web-based data in the social and behavioral sciences, WEBDATANET was established in 2011 as a COST Action (IS 1004) to create a multidisciplinary network of web-based data collection experts: (web) survey methodologists, psychologists, sociologists, linguists, economists, Internet scientists, media and public opinion researchers. The aim was to accumulate and synthesize knowledge regarding methodological issues of web-based data collection (surveys, experiments, tests, non-reactive data, and mobile Internet research), and foster its scientific usage in a broader community.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

OBJECTIVE: To assess whether exposure to high altitude induces cognitive dysfunction in young healthy European children and adolescents during acute, short-term exposure to an altitude of 3450 m and in an age-matched European population permanently living at this altitude. STUDY DESIGN: We tested executive function (inhibition, shifting, and working memory), memory (verbal, short-term visuospatial, and verbal episodic memory), and speed processing ability in: (1) 48 healthy nonacclimatized European children and adolescents, 24 hours after arrival at high altitude and 3 months after return to low altitude; (2) 21 matched European subjects permanently living at high altitude; and (3) a matched control group tested twice at low altitude. RESULTS: Short-term hypoxia significantly impaired all but 2 (visuospatial memory and processing speed) of the neuropsychological abilities that were tested. These impairments were even more severe in the children permanently living at high altitude. Three months after return to low altitude, the neuropsychological performances significantly improved and were comparable with those observed in the control group tested only at low altitude. CONCLUSIONS: Acute short-term exposure to an altitude at which major tourist destinations are located induces marked executive and memory deficits in healthy children. These deficits are equally marked or more severe in children permanently living at high altitude and are expected to impair their learning abilities.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

La transición a la edad adulta y vida activa es un proceso extremadamente complejo para los jóvenes con discapacidad. Para plantear propuestas de actuación que mejoren sus oportunidades de conseguir objetivos relacionados con la inclusión laboral y social en la vida adulta es imprescindible el diagnóstico en profundidad del contexto en que se construyen y desarrollan los procesos de transición. En este artículo se presenta un estudio en el que se ha aplicado el método Delphi con el propósito de obtener datos sobre la adecuación de los servicios o dispositivos que trabajan con jóvenes con discapacidad a lo largo de su proceso de transición a la edad adulta y vida activa, tanto en el escenario escolar como en el postescolar. Se han constituido dos paneles de expertos, uno con profesionales del ámbito educativo y otro con profesionales que trabajan en servicios postescolares. En ambos casos, los ejes temáticos son: visión del proceso de transición, aspectos curriculares y organizativos de los servicios, existencia de itinerarios de apoyo sistematizados, trabajo colaborativo entre profesionales, acciones de orientación con familias, adecuación de las alternativas postescolares, la formación de los profesionales, y coordinación de servicios. El análisis de los cuestionarios permite constatar las principales dificultades percibidas por los expertos en cada uno de los ámbitos y establece líneas básicas de actuación para mejorar los procesos de tránsito, entre las cuales destaca la necesidad de reforzar el papel de los equipos multiprofesionales en la articulación de redes de trabajo interprofesional

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Abstract Hypersensitivity pneumonitis is a diffuse interstitial and granulomatous lung disease caused by the inhalation of any one of a number of antigens. The objective of this study was to illustrate the spectrum of abnormalities in high-resolution computed tomography and histopathological findings related to hypersensitivity pneumonitis. We retrospectively evaluated patients who had been diagnosed with hypersensitivity pneumonitis (on the basis of clinical-radiological or clinical-radiological-pathological correlations) and had undergone lung biopsy. Hypersensitivity pneumonitis is clinically divided into acute, subacute, and chronic forms; high-resolution computed tomography findings correlate with the time of exposure; and the two occasionally overlap. In the subacute form, centrilobular micronodules, ground-glass opacities, and air trapping are characteristic high-resolution computed tomography findings, whereas histopathology shows lymphocytic inflammatory infiltrates, bronchiolitis, variable degrees of organizing pneumonia, and giant cells. In the chronic form, high-resolution computed tomography shows traction bronchiectasis, honeycombing, and lung fibrosis, the last also being seen in the biopsy sample. A definitive diagnosis of hypersensitivity pneumonitis can be made only through a multidisciplinary approach, by correlating clinical findings, exposure history, high-resolution computed tomography findings, and lung biopsy findings.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Bioactive glasses are excellent candidates for implant materials, because they can form a chemical bond to bone or guide bone growth, depending on the glass composition. Some compositions have even shown soft tissue attachment and antimicrobial effects. So far, most clinical applications are based on monoliths, plates and particulates of different grain sizes. There is a growing interest in special products such as porous implants sintered from microspheres and fibers drawn from preforms or glass melts. The viscosity range at which these are formed coincides with the crystallization temperature range for most bioactive glasses, thus complicating the manufacturing process. In this work, the crystallization tendency and its kinetics for a series of glasses with their compositions within the range of bioactivity were investigated. The factors affecting crystallization and how it is related to composition were studied by means of thermal analysis and hot stage microscopy. The crystal compositions formed during isothermal and non-isothermal heat treatments were analyzed with SEM-EDXA and X-ray diffraction analysis. The temperatures at which sintering and fiber drawing can take place without interfering with crystallization were determined and glass compositions which are suitable for these purposes were established. The bioactivity of glass fibers and partly crystallized glass plates was studied by soaking them in simulated body fluid (SBF). The thickness of silica, calcium and phosphate rich reaction layers on the glass surface after soaking was used as an indication of the bioactivity. The results indicated that the crystallization tendencies of the experimental glasses are strongly dependent on composition. The main factor affecting the crystallization was found to be the alkali oxide content: the higher the alkali oxide content the lower the crystallization temperature. The primary crystalline phase formed at low temperatures in these glasses was sodium calcium silicate. The crystals were found to form through internal nucleation, leading to bulk crystallization. These glasses had high bioactivity in vitro. Even when partially crystalline, they formed typical reaction layers, indicating bioactivity. In fact, sodium calcium silicate crystals were shown to transform in vitro into hydroxyapatite during soaking. However, crystallization should be avoided because it was shown to retard dissolution, bioactivity reactions and complicate fiber drawing process. Glass compositions having low alkali oxide content showed formation of wollastonite crystals on the surface, at about 300°C above the glass transition temperature. The wide range between glass transition and crystallization allowed viscous flow sintering of these compositions. These glasses also withstood the thermal treatments required for fiber drawing processing. Precipitation of calcium and phosphate on fibers of these glasses in SBF suggested that they were osteoconductive. Glasses showing bioactivity crystallize easily, making their hot working challenging. Undesired crystallization can be avoided by choosing suitable compositions and heat treatment parameters, allowing desired product forms to be attained. Small changes in the oxide composition of the glass can have large effects and therefore a thorough understanding of glass crystallization behavior is a necessity for a successful outcome, when designing and manufacturing implants containing bioactive glasses.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Incident and near miss reporting is one of the proactive tools of safety management. By analyzing incidents and near misses and by corrective actions, severe accidents can potentially be avoided. Near miss and incident reporting is widely used in many riskprone industries such as aviation or chemical industry. In shipping incident and near miss reporting is required by the mandatory safety management system International Safety Management Code (ISM Code). However, in several studies the conclusion has been that incidents are reported poorly in the shipping industry. The aim of this report is to highlight the best practices for incident reporting in shipping and to support the shipping industry in the better utilization of incident reporting information. The study consists of three parts: 1) voluntary, shared reporting systems in shipping (international experiences), 2) interview study at four shipping companies in Sweden and in Finland (best practices), 3) expert workshop on incident reporting (problems and solutions). Preconditions for a functional reporting system are an existing no blame culture, commitment of the top management, feedback, good communication, training and an easy-to-use system. Although preconditions are met, problems can still appear, for example due to psychological, interpersonal or nationality-related reasons. In order to keep the reporting system functioning, the shipping company must be committed to maintain and develop the system and to tackle the problems. The whole reporting process from compiling, handling and analyzing a report, creating corrective actions and implementing them has to be handled properly in order to gain benefits from the reporting system. In addition to avoiding accidents, the functional reporting system can also offer other benefits by increasing safety awareness, by improving the overall safety and working conditions onboard, by enhancing team work and communication onboard and between ships and the land-based organization of shipping companies. Voluntary shared reporting systems are supported in the shipping industry in principle, but their development in the Baltic Sea is still in its infancy and the potential benefits of sharing the reports have not been realized. On the basis of this study we recommend that a common reporting system be developed for the Baltic Sea area which all the ships operating in the area could use regardless of their flag. Such a wider system could prevent some of the problems related to the current national systems. There would be more incident cases available in the database and this would support anonymity and thus encourage shipping companies to report to a shared database more frequently. A shared reporting system would contribute to the sharing of experiences and to the wider use of incident information in the shipping industry.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Glass is a unique material with a long history. Several glass products are used daily in our everyday life, often unnoticed. Glass can be found not only in obvious applications such as tableware, windows, and light bulbs, but also in tennis rackets, windmill turbine blades, optical devices, and medical implants. The glasses used at present as implants are inorganic silica-based melt-derived compositions mainly for hard-tissue repair as bone graft substitute in dentistry and orthopedics. The degree of glass reactivity desired varies according to implantation situation and it is vital that the ion release from any glasses used in medical applications is controlled. Understanding the in vitro dissolution rate of glasses provides a first approximation of their behavior in vivo. Specific studies concerning dissolution properties of bioactive glasses have been relatively scarce and mostly concentrated to static condition studies. The motivation behind this work was to develop a simple and accurate method for quantifying the in vitro dissolution rate of highly different types of glass compositions with interest for future clinical applications. By combining information from various experimental conditions, a better knowledge of glass dissolution and the suitability of different glasses for different medical applications can be obtained. Thus, two traditional and one novel approach were utilized in this thesis to study glass dissolution. The chemical durability of silicate glasses was tested in water and TRIS-buffered solution at static and dynamic conditions. The traditional in vitro testing with a TRISbuffered solution under static conditions works well with bioactive or with readily dissolving glasses, and it is easy to follow the ion dissolution reactions. However, in the buffered solution no marked differences between the more durable glasses were observed. The hydrolytic resistance of the glasses was studied using the standard procedure ISO 719. The relative scale given by the standard failed to provide any relevant information when bioactive glasses were studied. However, the clear differences in the hydrolytic resistance values imply that the method could be used as a rapid test to get an overall idea of the biodegradability of glasses. The standard method combined with the ion concentration and pH measurements gives a better estimate of the hydrolytic resistance because of the high silicon amount released from a glass. A sensitive on-line analysis method utilizing inductively coupled plasma optical emission spectrometer and a flow-through micro-volume pH electrode was developed to study the initial dissolution of biocompatible glasses. This approach was found suitable for compositions within a large range of chemical durability. With this approach, the initial dissolution of all ions could be measured simultaneously and quantitatively, which gave a good overall idea of the initial dissolution rates for the individual ions and the dissolution mechanism. These types of results with glass dissolution were presented for the first time during the course of writing this thesis. Based on the initial dissolution patterns obtained with the novel approach using TRIS, the experimental glasses could be divided into four distinct categories. The initial dissolution patterns of glasses correlated well with the anticipated bioactivity. Moreover, the normalized surface-specific mass loss rates and the different in vivo models and the actual in vivo data correlated well. The results suggest that this type of approach can be used for prescreening the suitability of novel glass compositions for future clinical applications. Furthermore, the results shed light on the possible bioactivity of glasses. An additional goal in this thesis was to gain insight into the phase changes occurring during various heat treatments of glasses with three selected compositions. Engineering-type T-T-T curves for glasses 1-98 and 13-93 were stablished. The information gained is essential in manufacturing amorphous porous implants or for drawing of continuous fibers of the glasses. Although both glasses can be hot worked to amorphous products at carefully controlled conditions, 1-98 showed one magnitude greater nucleation and crystal growth rate than 13-93. Thus, 13-93 is better suited than 1-98 for working processes which require long residence times at high temperatures. It was also shown that amorphous and partially crystalline porous implants can be sintered from bioactive glass S53P4. Surface crystallization of S53P4, forming Na2O∙CaO∙2SiO2, was observed to start at 650°C. The secondary crystals of Na2Ca4(PO4)2SiO4, reported for the first time in this thesis, were detected at higher temperatures, from 850°C to 1000°C. The crystal phases formed affected the dissolution behavior of the implants in simulated body fluid. This study opens up new possibilities for using S53P4 to manufacture various structures, while tailoring their bioactivity by controlling the proportions of the different phases. The results obtained in this thesis give valuable additional information and tools to the state of the art for designing glasses with respect to future clinical applications. With the knowledge gained we can identify different dissolution patters and use this information to improve the tuning of glass compositions. In addition, the novel online analysis approach provides an excellent opportunity to further enhance our knowledge of glass behavior in simulated body conditions.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Service provider selection has been said to be a critical factor in the formation of supply chains. Through successful selection companies can attain competitive advantage, cost savings and more flexible operations. Service provider management is the next crucial step in outsourcing process after the selection has been made. Without proper management companies cannot be sure about the level of service they have bought and they may suffer from service provider's opportunistic behavior. In worst case scenario the buyer company may end up in locked-in situation in which it is totally dependent of the service provider. This thesis studies how the case company conducts its carrier selection process along with the criteria related to it. A model for the final selection is also provided. In addition, case company's carrier management procedures are reflected against recommendations from previous researches. The research was conducted as a qualitative case study on the principal company, Neste Oil Retail. A literature review was made on outsourcing, service provider selection and service provider management. On the basis of the literature review, this thesis ended up recommending Analytic hierarchy process as the preferred model for the carrier selection. Furthermore, Agency theory was seen to be a functional framework for carrier management in this study. Empirical part of this thesis was conducted in the case company by interviewing the key persons in the selection process, making observations and going through documentations related to the subject. According to the results from the study, both carrier selection process as well as carrier management were closely in line with suggestions from literature review. Analytic hierarchy process results revealed that the case company considers service quality as the most important criteria with financial situation and price of service following behind with almost identical weights with each other. Equipment and personnel was seen as the least important selection criterion. Regarding carrier management, the study resulted in the conclusion that the company should consider engaging more in carrier development and working towards beneficial and effective relationships. Otherwise, no major changes were recommended for the case company processes.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study looks at negotiation of belonging and understandings of home among a generation of young Kurdish adults who were born in Iraq, Iran, and Turkey and who reached adulthood in Finland. The young Kurds taking part in the study belong to the generation of migrants who moved to Finland in their childhood and early teenage years from the region of Kurdistan and elsewhere in the Middle East, then grew to adulthood in Finland. In theoretical terms, the study draws broadly from three approaches: transnationalism, intersectionality, and narrativity. Transnationalism refers to individuals’ cross-border ties and interaction extending beyond nationstates’ borders. Young people of migrant background, it has been suggested, are raised in a transnational space that entails cross-border contacts, ties, and visits to the societies of departure. How identities and feelings of belonging become formed in relation to the transnational space is approached with an intersectional frame, for examination of individuals’ positionings in terms of their intersecting attributes of gender, age/generation, and ethnicity, among others. Focus on the narrative approach allows untangling how individuals make sense of their place in the social world and how they narrate their belonging in terms of various mechanisms of inclusion and exclusion, including institutional arrangements and discursive categorisation schemes. The empirical data for this qualitative study come from 25 semi-structured thematic interviews that were conducted with 23 young Kurdish adults living in Turku and Helsinki between 2009 and 2011. The interviewees were aged between 19 and 28 years at the time of interviewing. Interview themes involved topics such as school and working life, family relations and language-learning, political activism and citizenship, transnational ties and attachments, belonging and identification, and plans for the future and aspirations. Furthermore, data were collected from observations during political demonstrations and meetings, along with cultural get-togethers. The data were analysed via thematic analysis. The findings from the study suggest that young Kurds express a strong sense of ‘Kurdishness’ that is based partially on knowing the Kurdish language and is informed by a sense of cultural continuity in the diaspora setting. Collective Kurdish identity narratives, particularly related to the consciousness of being a marginalised ‘other’ in the context of the Middle East, are resonant in young interviewees’ narrations of ‘Kurdishness’. Thus, a sense of ‘Kurdishness’ is drawn from lived experiences indexed to a particular politico-historical context of the Kurdish diaspora movements but also from the current situation of Kurdish minorities in the Middle East. On the other hand, young Kurds construct a sense of belonging in terms of the discursive constructions of ‘Finnishness’ and ‘otherness’ in the Finnish context. The racialised boundaries of ‘Finnishness’ are echoed in young Kurds’ narrations and position them as the ‘other’ – namely, the ‘immigrant’, ‘refugee’, or ‘foreigner’ – on the basis of embodied signifiers (specifically, their darker complexions). This study also indicates that young Kurds navigate between gendered expectations and norms at home and outside the home environment. They negotiate their positionings through linguistic repertoires – for instance, through mastery of the Finnish language – and by adjusting their behaviour in light of the context. This suggests that young Kurds adopt various forms of agency to display and enact their belonging in a transnational diaspora space. Young Kurds’ narrations display both territorially-bounded and non-territorially-bounded elements with regard to the relationship between identity and locality. ‘Home’ is located in Finland, and the future and aspirations are planned in relation to it. In contrast, the region of Kurdistan is viewed as ‘homelandand as the place of origins and roots, where temporary stays and visits are a possibility. The emotional attachments are forged in relation to the country (Finland) and not so much relative to ‘Finnishness’, which the interviewees considered an exclusionary identity category. Furthermore, identification with one’s immediate place of residence (city) or, in some cases, with a religious identity as ‘Muslim’ provides a more flexible venue for identification than does identifying oneself with the (Finnish) nation.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

People who suffer from traumatic brain injury (TBI) often experience cognitive deficits in spatial reference and working memory. The possible roles of cyclooxygenase-1 (COX-1) in learning and memory impairment in mice with TBI are far from well known. Adult mice subjected to TBI were treated with the COX-1 selective inhibitor SC560. Performance in the open field and on the beam walk was then used to assess motor and behavioral function 1, 3, 7, 14, and 21 days following injury. Acquisition of spatial learning and memory retention was assessed using the Morris water maze on day 15 post-TBI. The expressions of COX-1, prostaglandin E2 (PGE2), interleukin (IL)-6, brain-derived neurotrophic factor (BDNF), platelet-derived growth factor BB (PDGF-BB), synapsin-I, and synaptophysin were detected in TBI mice. Administration of SC560 improved performance of beam walk tasks as well as spatial learning and memory after TBI. SC560 also reduced expressions of inflammatory markers IL-6 and PGE2, and reversed the expressions of COX-1, BDNF, PDGF-BB, synapsin-I, and synaptophysin in TBI mice. The present findings demonstrated that COX-1 might play an important role in cognitive deficits after TBI and that selective COX-1 inhibition should be further investigated as a potential therapeutic approach for TBI.