Edge-defined, film-fed growth (EFG) technique for the preparation of alpha-Al2O3 : C crystal with highly sensitive thermoluminescence response

In this work, alpha-Al2O3:C, a highly sensitive thermoluminescence dosimetry crystal, was grown by the EFG method in which a graphite heating unit and shield acted as the carbon source during the growth process. The optical, luminescent properties and dosimetric characteristics of the crystal were investigated. The as-grown crystal shows a single glow peak at 536 K, which is associated with Cr3+ ions. After annealing in H-2 at 1673 K for 80 h, the crystal shows a single glow peak at 460 K and a blue emission band at 415 nm. The thermoluminescent response of the annealed crystal shows linear-sublinear-saturation characteristics in the dose range from 5 x 10(-6) to 100 Gy.

Enhancement of near-band edge photoluminescence of ZnO thin films by employing MgF2 buffer layer

ZnO/MgF2/ZnO sandwich structure films were fabricated. The effects of a buffer layer on structure and optical properties of ZnO films were investigated by X-ray diffraction, photoluminescence, optical transmittance and absorption measurements. Measurement results showed that the buffer layer had the effects of improving the quality of ZnO films and releasing the residual stresses in the films. The near-band edge emissions of ZnO films deposited on the MgF2 buffer layer were significantly enhanced compared with those deposited on bare substrate due to the smaller lattice mismatch between MgF2 and ZnO than that between fused silica and ZnO. (c) 2006 Elsevier B.V. All rights reserved.

Enhancement of near-band-edge photoluminescence of ZnO thin films in sandwich configuration at room temperature

ZnO/ITO/ZnO sandwich structure films were fabricated. The effects of buffer layer on the structure and optical properties of ZnO films were investigated by x-ray diffraction (XRD), photoluminescence, optical transmittance, and absorption measurements. XRD spectra indicate that a buffer layer has the effects of lowering the grain orientation of ZnO films and increasing the residual stresses in the films. The near-band-edge emissions of ZnO films deposited on both single indium tin oxide (ITO) buffer and ITO/ZnO double buffers are significantly enhanced compared with that deposited on a bare substrate due to the quantum confinement effect. (C) 2006 American Institute of Physics.

The effects of oxygen partial pressure on the optical absorption edge and the UV emission energy of ZnO films

The optical absorption edge and ultraviolet (UV) emission energy of ZnO films deposited by direct current (DC) reactive magnetron sputtering at room temperature have been investigated. With the oxygen ratio increasing, the structure of films changes from zinc and zinc oxide coexisting phase to single-phase ZnO and finally to the highly (002) orientation. Both the grain size and the stress of ZnO film vary with the oxygen partial pressure. Upon increasing the oxygen partial pressure in the growing ambient, the visible emission in the room-temperature photoluminescence spectra was suppressed without sacrificing the band-edge emission intensity in the ultraviolet region. The peaks of photoluminescence spectra were located at 3.06---3.15 eV. From optical transmittance spectra of ZnO films, the optical band gap edge was observed to shift towards shorter wavelength with the increase of oxygen partial pressure.

Fe−TPP Coordination Network with Metalloporphyrinic Neutral Radicals and Face-to-Face and Edge-to-Face π−π Stacking

Artículo científico Inorg. Chem. 2013, 52, 8074−8081

Estudo da produção de multijatos em colisões próton-próton com √s= 7 TeV no detector CMS/LHC

O Compact Muon Solenoid (CMS) é um dos principais detectores instalados no LHC que possibilita o estudo de diferentes aspectos da Física, indo do Modelo Padrão à matéria escura. Esse detector de propósito geral, foi construído para ser capaz de medir múons com uma grande precisão e todos os seus subdetectores foram construídos com uma alta granularidade, tornando possível identificar e caracterizar as propriedades cinemáticas das partículas finais da colisão. O algoritmo de reconstrução de eventos inclui a identificação de jatos, ou seja, é possível identificar a assinatura da produção de pártons na colisão e a medida de seções de choque da produção de muitos jatos é um dos métodos para se explorar as contribuições da Cromodinâmica Quântica (Quantum Chromodynamics - QCD) perturbativa, permitindo avaliar as previsões implementadas nas simulações de eventos. Tendo em vista a caracterização de processos relacionados com a QCD em colisões de próton-próton a uma energia do centro de massa de 7 TeV, é apresentada a medida da seção de choque da produção inclusiva de multijatos no CMS. Para realizar essa medida foram utilizados dados reais coletados em 2010, onde não se apresentava muitas colisões por cruzamento de pacote, com uma luminosidade integrada de L = 2,869 pb-1 e utilizando jatos que estão em quase todo o espaço de fase acessível em pseudorapidez |n|≤ 4,8 e momentum transverso pT ≥ 30 GeV/ c2. Desse resultado foram removidos os efeitos de detecção comparado com predições simuladas.

System architecture and deployment scenarios for SESAME: Small cEllS coordinAtion for Multi-tenancy and Edge services

The surge of the Internet traffic with exabytes of data flowing over operators mobile networks has created the need to rethink the paradigms behind the design of the mobile network architecture. The inadequacy of the 4G UMTS Long term Evolution (LTE) and even of its advanced version LTE-A is evident, considering that the traffic will be extremely heterogeneous in the near future and ranging from 4K resolution TV to machine-type communications. To keep up with these changes, academia, industries and EU institutions have now engaged in the quest for new 5G technology. In this paper we present the innovative system design, concepts and visions developed by the 5G PPP H2020 project SESAME (Small cEllS coordinAtion for Multi-tenancy and Edge services). The innovation of SESAME is manifold: i) combine the key 5G small cells with cloud technology, ii) promote and develop the concept of Small Cellsas- a-Service (SCaaS), iii) bring computing and storage power at the mobile network edge through the development of nonx86 ARM technology enabled micro-servers, and iv) address a large number of scenarios and use cases applying mobile edge computing. Topics: