Tukkilajittelun röntgenmittauksen hyödyntäminen, tapaus Korkeakosken saha

Diplomityön tavoitteena oli selvittää työn toimeksiantajan UPM, Korkeakosken sahan röntgenmittauslaitteen oksaindeksilajitteluparametrille lukuarvo, jolla päästään A-tukkien osalta tavoiteltuun sydänsahatavaralaatujakaumaan eli saadaan siirrettyä VI- sydänsahatavaralaatu B-tukkien joukkoon. Lisäksi työssä tutkittiin sahan tukkilajittelun röntgenmittauslaitteen mittauksen toimivuutta ja sen tehokkaampaa hyödyntämistä. Korkeakosken sahan käyttämä röntgenmittauslaite on Bintec Oy:n kehittämä ja on tyypiltään Wood-X-4D. Laitteen mittaus perustuu tukin kuvaamiseen viipaleinaeli tomografiamittaukseen. Laite mittaa tukista useita ominaisuuksia ja antaa niiden perusteella lajitteluparametreille lukuarvoja. Lajitteluparametriarvojen muuttaminen vaikuttaa syntyvään sydänsahatavaralaatujakaumaan. Työ suoritettiin röntgenmittauslaitteella tekemällä tukeille toistomittauksia ja lajittelukokeita. Kokeissa käytettävät tukit olivat halkaisijaltaan 230 mm - tukkiluokasta. Tukkeja lajiteltiin eri tukkilaatulajitteluasetuksilla, jolloin seurattiin niistä sahattavia sahatavaralaatuja. Sahatavaralaatujen määrityksessä käytettiin sahaosastolla olevaa Finscan Oy:n kehittämää BoardMaster-NT-lajittelumittalaitetta. Tutkimus osoitti, että oksaindeksin pudottamisella, ei päästy työnantajan asettamaan sydänsahatavaran laatulajittelutavoitteeseen sallituissa oksaindeksirajoissa. Tavoitteen saavuttaminen olisi edellyttänyt oksaindeksin arvon pudottamista selkeästi alle asetetun 28 rajan. Tutkimustulokset osoittivat, että röntgenmittalaitteen lajitteluparametrien toiminnan varmuus vaihteli merkittävästi riippuen käytettävästä parametrista ja että laitteen mittaustarkkuus kärsi laitteen yleiseksi viaksi todetun detektorivian myötä. Täten tarkka laatulajittelu edellyttää röntgenmittalaitteen kaikkia neljää toimivaa detektoria. Tämä pystytään varmistamaanvaradetektorilla.

Mouse hepatic oval cells require Met-dependent PI3K to impair TGF-β-Induced oxidative stress and apoptosis.

We have previously shown that oval cells harboring a genetically inactivated Met tyrosine kinase (Met−/− oval cells) are more sensitive to TGF-β-induced apoptosis than cells expressing a functional Met (Metflx/flx), demonstrating that the HGF/Met axis plays a pivotal role in oval cell survival. Here, we have examined the mechanism behind this effect and have found that TGF-β induced a mitochondria-dependent apoptotic cell death in Metflx/flx and Met−/− oval cells, associated with a marked increase in levels of the BH3-only proteins Bim and Bmf. Bmf plays a key role during TGF-β-mediated apoptosis since knocking down of BMF significantly diminished the apoptotic response in Met-/- oval cells. TGF-β also induced oxidative stress accompanied by NADPH oxidase 4 (Nox4) mRNA up-regulation and decreased protein levels of antioxidant enzymes. Antioxidants inhibit both TGF-β-induced caspase 3 activity and Bmf up-regulation, revealing an oxidative stress-dependent Bmf regulation by TGF-β. Notably, oxidative stress-related events were strongly amplified in Met−/− oval cells, emphasizing the critical role of Met in promoting survival. Pharmacological inhibition of PI3K did impair HGF-driven protection from TGF-β-induced apoptosis and increased sensitivity of Metflx/flx oval cells to TGF-ß by enhancing oxidative stress, reaching apoptotic indices similar to those obtained in Met−/− oval cells. Interestingly, both PI3K inhibition and/or knockdown itself resulted in caspase-3 activation and loss of viability in Metflx/flx oval cells, whereas no effect was observed in Met−/− oval cells. Altogether, results presented here provide solid evidences that both paracrine and autocrine HGF/Met signaling requires PI3K to promote mouse hepatic oval cell survival against TGF-β-induced oxidative stress and apoptosis.

Cardiovascular magnetic resonance imaging techniques for motion-suppressed multi-dimensional coronary artery imaging with high spatial and temporal resolution

L'imagerie par résonance magnétique (IRM) peut fournir aux cardiologues des informations diagnostiques importantes sur l'état de la maladie de l'artère coronarienne dans les patients. Le défi majeur pour l'IRM cardiaque est de gérer toutes les sources de mouvement qui peuvent affecter la qualité des images en réduisant l'information diagnostique. Cette thèse a donc comme but de développer des nouvelles techniques d'acquisitions des images IRM, en changeant les techniques de compensation du mouvement, pour en augmenter l'efficacité, la flexibilité, la robustesse et pour obtenir plus d'information sur le tissu et plus d'information temporelle. Les techniques proposées favorisent donc l'avancement de l'imagerie des coronaires dans une direction plus maniable et multi-usage qui peut facilement être transférée dans l'environnement clinique. La première partie de la thèse s'est concentrée sur l'étude du mouvement des artères coronariennes sur des patients en utilisant la techniques d'imagerie standard (rayons x), pour mesurer la précision avec laquelle les artères coronariennes retournent dans la même position battement après battement (repositionnement des coronaires). Nous avons découvert qu'il y a des intervalles dans le cycle cardiaque, tôt dans la systole et à moitié de la diastole, où le repositionnement des coronaires est au minimum. En réponse nous avons développé une nouvelle séquence d'acquisition (T2-post) capable d'acquérir les données aussi tôt dans la systole. Cette séquence a été testée sur des volontaires sains et on a pu constater que la qualité de visualisation des artère coronariennes est égale à celle obtenue avec les techniques standard. De plus, le rapport signal sur bruit fourni par la séquence d'acquisition proposée est supérieur à celui obtenu avec les techniques d'imagerie standard. La deuxième partie de la thèse a exploré un paradigme d'acquisition des images cardiaques complètement nouveau pour l'imagerie du coeur entier. La technique proposée dans ce travail acquiert les données sans arrêt (free-running) au lieu d'être synchronisée avec le mouvement cardiaque. De cette façon, l'efficacité de la séquence d'acquisition est augmentée de manière significative et les images produites représentent le coeur entier dans toutes les phases cardiaques (quatre dimensions, 4D). Par ailleurs, l'auto-navigation de la respiration permet d'effectuer cette acquisition en respiration libre. Cette technologie rend possible de visualiser et évaluer l'anatomie du coeur et de ses vaisseaux ainsi que la fonction cardiaque en quatre dimensions et avec une très haute résolution spatiale et temporelle, sans la nécessité d'injecter un moyen de contraste. Le pas essentiel qui a permis le développement de cette technique est l'utilisation d'une trajectoire d'acquisition radiale 3D basée sur l'angle d'or. Avec cette trajectoire, il est possible d'acquérir continûment les données d'espace k, puis de réordonner les données et choisir les paramètres temporel des images 4D a posteriori. L'acquisition 4D a été aussi couplée avec un algorithme de reconstructions itératif (compressed sensing) qui permet d'augmenter la résolution temporelle tout en augmentant la qualité des images. Grâce aux images 4D, il est possible maintenant de visualiser les artères coronariennes entières dans chaque phase du cycle cardiaque et, avec les mêmes données, de visualiser et mesurer la fonction cardiaque. La qualité des artères coronariennes dans les images 4D est la même que dans les images obtenues avec une acquisition 3D standard, acquise en diastole Par ailleurs, les valeurs de fonction cardiaque mesurées au moyen des images 4D concorde avec les valeurs obtenues avec les images 2D standard. Finalement, dans la dernière partie de la thèse une technique d'acquisition a temps d'écho ultra-court (UTE) a été développée pour la visualisation in vivo des calcifications des artères coronariennes. Des études récentes ont démontré que les acquisitions UTE permettent de visualiser les calcifications dans des plaques athérosclérotiques ex vivo. Cepandent le mouvement du coeur a entravé jusqu'à maintenant l'utilisation des techniques UTE in vivo. Pour résoudre ce problème nous avons développé une séquence d'acquisition UTE avec trajectoire radiale 3D et l'avons testée sur des volontaires. La technique proposée utilise une auto-navigation 3D pour corriger le mouvement respiratoire et est synchronisée avec l'ECG. Trois échos sont acquis pour extraire le signal de la calcification avec des composants au T2 très court tout en permettant de séparer le signal de la graisse depuis le signal de l'eau. Les résultats sont encore préliminaires mais on peut affirmer que la technique développé peut potentiellement montrer les calcifications des artères coronariennes in vivo. En conclusion, ce travail de thèse présente trois nouvelles techniques pour l'IRM du coeur entier capables d'améliorer la visualisation et la caractérisation de la maladie athérosclérotique des coronaires. Ces techniques fournissent des informations anatomiques et fonctionnelles en quatre dimensions et des informations sur la composition du tissu auparavant indisponibles. CORONARY artery magnetic resonance imaging (MRI) has the potential to provide the cardiologist with relevant diagnostic information relative to coronary artery disease of patients. The major challenge of cardiac MRI, though, is dealing with all sources of motions that can corrupt the images affecting the diagnostic information provided. The current thesis, thus, focused on the development of new MRI techniques that change the standard approach to cardiac motion compensation in order to increase the efficiency of cardioavscular MRI, to provide more flexibility and robustness, new temporal information and new tissue information. The proposed approaches help in advancing coronary magnetic resonance angiography (MRA) in the direction of an easy-to-use and multipurpose tool that can be translated to the clinical environment. The first part of the thesis focused on the study of coronary artery motion through gold standard imaging techniques (x-ray angiography) in patients, in order to measure the precision with which the coronary arteries assume the same position beat after beat (coronary artery repositioning). We learned that intervals with minimal coronary artery repositioning occur in peak systole and in mid diastole and we responded with a new pulse sequence (T2~post) that is able to provide peak-systolic imaging. Such a sequence was tested in healthy volunteers and, from the image quality comparison, we learned that the proposed approach provides coronary artery visualization and contrast-to-noise ratio (CNR) comparable with the standard acquisition approach, but with increased signal-to-noise ratio (SNR). The second part of the thesis explored a completely new paradigm for whole- heart cardiovascular MRI. The proposed techniques acquires the data continuously (free-running), instead of being triggered, thus increasing the efficiency of the acquisition and providing four dimensional images of the whole heart, while respiratory self navigation allows for the scan to be performed in free breathing. This enabling technology allows for anatomical and functional evaluation in four dimensions, with high spatial and temporal resolution and without the need for contrast agent injection. The enabling step is the use of a golden-angle based 3D radial trajectory, which allows for a continuous sampling of the k-space and a retrospective selection of the timing parameters of the reconstructed dataset. The free-running 4D acquisition was then combined with a compressed sensing reconstruction algorithm that further increases the temporal resolution of the 4D dataset, while at the same time increasing the overall image quality by removing undersampling artifacts. The obtained 4D images provide visualization of the whole coronary artery tree in each phases of the cardiac cycle and, at the same time, allow for the assessment of the cardiac function with a single free- breathing scan. The quality of the coronary arteries provided by the frames of the free-running 4D acquisition is in line with the one obtained with the standard ECG-triggered one, and the cardiac function evaluation matched the one measured with gold-standard stack of 2D cine approaches. Finally, the last part of the thesis focused on the development of ultrashort echo time (UTE) acquisition scheme for in vivo detection of calcification in the coronary arteries. Recent studies showed that UTE imaging allows for the coronary artery plaque calcification ex vivo, since it is able to detect the short T2 components of the calcification. The heart motion, though, prevented this technique from being applied in vivo. An ECG-triggered self-navigated 3D radial triple- echo UTE acquisition has then been developed and tested in healthy volunteers. The proposed sequence combines a 3D self-navigation approach with a 3D radial UTE acquisition enabling data collection during free breathing. Three echoes are simultaneously acquired to extract the short T2 components of the calcification while a water and fat separation technique allows for proper visualization of the coronary arteries. Even though the results are still preliminary, the proposed sequence showed great potential for the in vivo visualization of coronary artery calcification. In conclusion, the thesis presents three novel MRI approaches aimed at improved characterization and assessment of atherosclerotic coronary artery disease. These approaches provide new anatomical and functional information in four dimensions, and support tissue characterization for coronary artery plaques.

Skanskan tuotantomallin käyttö tuotannossa

Tämä insinöörityö tehtiin Skanska Talonrakennus Oy:n asuntorakentamisen Etelä-Suomen yksikölle. Skanska Talonrakennus rakentaa 08/2007-12/2008 Kirkkonummelle kolmen kerrostalon kohdetta nimeltä As. Oy Kirkkonummen Lukkarinhovi, jonka tuotantomallintamista tämä insinöörityö käsittelee. Skanskassa käytetään rakennustyömaiden toteutus- ja toteumamalleista termiä tuotantomalli. Tuotantomallit on kehitetty tietomallien pohjalta tuotannon suunnittelun apuvälineeksi . Tuotantomallin avulla voidaan seurata ja ohjata rakentamista projektin edetessä sekä suunnitella tarkasti työmaan toiminnot. Tuotantomallin visuaalinen ominaisuus helpottaa työmaan henkilöstöä suunnittelemaan resursseja, elementtiasennusjärjestyksiä sekä materiaalinostoja. Tuotantomalleilla pyritään tehostamaan tuotantoa ja sitä kautta alentaa kustannuksia. Tuotannon tehostaminen toteutuu määrälaskennan parantumisen sekä hankintojen, aikataulujen ja logistiikan tarkentumisen kautta. Lukkarinhovin tuotantomallin tehtiin Enterprixe Oy:n kehittämällä tuotantomallisovelluksella. Tuotantomallia varten oli kohteen piirustuksista laadittu 3D-malli, johon linkitettiin Control 2007:llä tehty aikataulu. Tuotantomallilla oli tarkoitus tutkia Enterprixen soveltuvuutta tuotannon käyttöön kohteen anturoiden sekä kahden kerrostalon osalta. Insinöörityö tehtiin tuotannonnäkökulmasta. 4D-suunnitelmista tehtiin kaksi eri versiota, toinen alkuperäisen aikataulusuunnitelman mukaisesti ja toinen toteutuneiden työsaavutusten mukaisesti. Insinöörityön teonaikana Enterprixe oli vielä vahvasti kehitysvaiheessa ja uusia versioita ohjelmasta ilmestyi kuu-kausittain.

Malformações do sistema nervoso central e malformações associadas diagnosticadas pela ultrassonografia obstétrica

OBJETIVO: Identificar a prevalência de malformações congênitas do sistema nervoso central (SNC) e malformações associadas diagnosticadas pela ultrassonografia obstétrica. MATERIAIS E MÉTODOS: Estudo observacional, transversal, descritivo, em instituição de referência para gestações de alto risco. RESULTADOS: Malformações congênitas do SNC estiveram presentes sem outras malformações associadas em 65,78%, com a distribuição: hidrocefalia (37,5%), mielomeningocele (15%), encefalocele (12,5%), agenesia de corpo caloso (12,5%), anencefalia (12,5%), holoprosencefalia (7,5%), Dandy-Walker (7,5%), Arnold-Chiari (5,0%), hidranencefalia (5,0%), meningocele (5,0%), cisto aracnoideo (2,5%). Malformações congênitas de outros sistemas estiveram associadas às do SNC: craniofacial (73,9%), ortopédica (65,2%), cardiovascular (34,8%), geniturinária (30,4%), gastrintestinal (30,4%), respiratória (8,7%), sindrômica (8,7), oftalmológica (4,3%). A sensibilidade ultrassonográfica no estudo de malformações fetais do SNC foi 79,4%. A taxa de falso-negativos foi 20,5%. Dentre as limitações quantificáveis destaca-se o oligodrâmnio, presente em 25% dos falso-negativos. CONCLUSÃO: A ultrassonografia obstétrica possui boa sensibilidade no rastreio de malformações fetais do SNC, em especial com o aperfeiçoamento constante e domínio na utilização de métodos especializados, como o Doppler e a ultrassonografia volumétrica (3D/4D), contribuindo para firmar-se como modalidade de escolha nesta rotina. Complementar ao método, a ressonância magnética pode vir a fornecer subsídios para uma ainda melhor assistência perinatal.

On Variational Ensemble Kalman Filtering

The Extended Kalman Filter (EKF) and four dimensional assimilation variational method (4D-VAR) are both advanced data assimilation methods. The EKF is impractical in large scale problems and 4D-VAR needs much effort in building the adjoint model. In this work we have formulated a data assimilation method that will tackle the above difficulties. The method will be later called the Variational Ensemble Kalman Filter (VEnKF). The method has been tested with the Lorenz95 model. Data has been simulated from the solution of the Lorenz95 equation with normally distributed noise. Two experiments have been conducted, first with full observations and the other one with partial observations. In each experiment we assimilate data with three-hour and six-hour time windows. Different ensemble sizes have been tested to examine the method. There is no strong difference between the results shown by the two time windows in either experiment. Experiment I gave similar results for all ensemble sizes tested while in experiment II, higher ensembles produce better results. In experiment I, a small ensemble size was enough to produce nice results while in experiment II the size had to be larger. Computational speed is not as good as we would want. The use of the Limited memory BFGS method instead of the current BFGS method might improve this. The method has proven succesful. Even if, it is unable to match the quality of analyses of EKF, it attains significant skill in forecasts ensuing from the analysis it has produced. It has two advantages over EKF; VEnKF does not require an adjoint model and it can be easily parallelized.

Tietomallintamisen aiheuttamat muutokset ja hyödyt LVI-suunnitteluprosessissa sekä määrälaskennassa

Tässä diplomityössä tarkastellaan tietomallintamista eng. BIM (Building Information Modeling) LVI-suunnittelun näkökulmasta sekä esitellään tietomallintamisen vaikutuksia ja hyötyjä suunnitteluprosessiin. Tietomallintaminen mahdollistaa esimerkiksi LVI-suunnittelijan tuottaman määräluettelon 3D-mallista, jonka seurauksena eri toimijoiden väliset rajapinnat tulevat luultavasti kokemaan muutoksia. Työssä vertaillaan käsin laskettuja ja 3D-mallista tuotettuja määräluetteloita toisiinsa. Työhön sisällytetään myös urakoitsijoiden haastatteluja, joissa pyritään selvittämään heidän näkemyksiään suunnittelijan tuottamiin määrätietoihin.

Mobiiliavusteisen rakennusprojektin seurantajärjestelmän suunnittelu ja toteutus

In the construction industry, the role of project management and monitoring is emphasized, because the responsibilities have been carefully planned and divided. A concrete element factory manufactures the units based on construction drawings, while a transport company is responsible of transporting the elements to the worksite. At the worksite, an installation team assembles the elements according to plans. Usually, there are several manufacturers and transport companies involved in the construction process and the distances between different parties can be rather long. Therefore, the role of information exchange is critical in order to control, for example, schedules and exceptions. From the viewpoint of project management, the whole process should be controlled and monitored in realtime - in such a way that the managers are able to analyze and report the data afterwards. In this master’s thesis, a mobile-aided construction project monitoring system is designed and implemented. The monitoring system consists of three main components: mobile phone application, server software and an interface application to Tekla Structures BIM-software. Precast construction components, projects and users are identified by using 2D-barcodes that are read with the camera of a mobile phone. An option would be to use RFID tags and readers. After successful identification, the precast component can be tagged with monitoring data, including state acknowledgments and error reports that are sent and saved to the server. Collected data can be viewed through the www-pages of the monitoring system. In addition, the data can be synchronized to the Tekla Structures-software that is running the 3D-model of the whole building. Synchronization maintains and enhances the traceability of monitoring data, as well as, helps to visualize the progression of the project.

Construction Plan Image Service for Mobile Devices

The forthcoming media revolution of exchanging paper documents to digital media in construction engineering requires new tools to be developed. The basis of this bachelor’s thesis was to explore the preliminary possibilities of exporting imagery from a Building Information Modelling –software to a mobile phone on a construction yard. This was done by producing a Web Service which uses the design software’s Application Programming Interface to interact with a structures model in order to produce the requested imagery. While mobile phones were found lacking as client devices, because of limited processing power and small displays, the implementation showed that the Tekla Structures API can be used to automatically produce various types of imagery. Web Services can be used to transfer this data to the client. Before further development the needs of the contractor, benefits for the building master and inspector and the full potential of the BIM-software need to be mapped out with surveys.

LVI-suunnittelun ohjaus IPD-projekteissa

Tässä diplomityössä on tutkittu LVI-suunnittelun ohjaamista ja sen kehittämistä integroiduissa rakennushankkeissa. Tutkimuksen tavoitteena on löytää kehitysehdotuksia LVI-suunnittelun eteenpäinviemiseksi integroiduissa hankkeissa. Tutkimus on tehty hyödyntäen kirjallisia lähteitä ja haastattelemalla integroiduissa projekteissa mukana ollutta henkilöstöä. Perinteisessä rakennushankkeessa eri suunnittelualat toimitetaan useasta yrityksestä. Tässä työssä lähtökohtana on, että merkittävimmät suunnittelualat kuten arkkitehti-, rakenne- ja talotekninensuunnittelu tulevat samalta toimittajalta. Toimituslaajuuteen voidaan lisätä myös mm. rakennuttajakonsultointi- ja kiinteistönkehitysprosessi. Tutkimuksen tuloksena saatiin määritettyä kehitysehdotukset integroituihin hankkeisiin yleiseltä ja LVI-suunnittelun kannalta. Kehitystyössä tulee panostaa tietomallintamiseen, aikataulutukseen ja yhteistyöhön. Tietomallintamista voidaan parantaa koulutuksen, Yleisten tietomallivaatimusten 2012 ja tietomallien tarkasteluohjelmistojen avulla. Aikataulutus paranee, kun suunnittelijat saadaan hankkeeseen mukaan riittävän aikaisessa vaiheessa ja kun suunnittelijat pyrkivät aktiivisesti vaikuttamaan hankkeen tarjouksen- ja sopimuksentekoon. Yhteistyötä voidaan parantaa avoimen ilmapiirin korostamisella ja projektiorganisaation tiivistämisellä.

Potential benefits of building information modeling for building material supplier

This thesis investigated building information modeling (BIM) from a material supplier’s point of view. The objective was to gain understanding about how a building material supplier could benefit from the growing use of BIM in the AEC (architectural, engineering and construction) industry. Increasing amount of inquiries related to BIM from customers and other interest groups had awoken target company’s interest towards BIM. This thesis acts as a pre-study for the target company related to potential of BIM. First of all BIM and its meaning from a material supplier’s point of view was defined based on a literature review. To reveal the potential benefits of BIM for a material supplier a questionnaire survey and in total of 11 interviews were conducted. Based on the literature review and analyzed results it came clear that BIM offers benefits also for material suppliers. Product libraries and material databases for BIM tools can act as an important marketing channel for material suppliers. Material suppliers could also utilize the information from the BIM models to schedule their deliveries more precisely and potentially even to schedule their own production. All this needs deeper cooperation between material suppliers, contractors and other stakeholders in the AEC industry. Based on the results also first steps for the target company to utilize the growing use of BIM were defined.

Utilização de acetochlor e atrazine aplicados em mistura de tanque com dessecantes no sistema de plantio direto

A mistura em tanque de herbicidas dessecantes com residuais tem sido utilizada com frequencia pelos agricultores no sistema de plantio direto. Sabe-se, no entanto, que alguns herbicidas residuais têm problemas de retenção na palha quando utilizados isoladamente em préemergência nesse sistema. O objetivo do presente trabalho, foi estudar o comportamento dos herbicidas residuais atrazine e acetochlor em mistura com dessecantes no manejo em plantio direto. Para tal, foi instalado um experimento em blocos ao acaso com parcelas subdivididas e quatro repetições. Os tratamentos, alocados na parcela, em número de nove, foram constituidos pelas seguintes misturas de herbicidas: 1) acetochlor + glyphosate; 2) acetochlor + glyphosate + 2,4D; 3) acetochlor + paraquat; 4) acetochlor + paraquat + 2,4D; 5) atrazine + glyphosate; 6) atrazine + glyphosate + 2,4D; 7) atrazine + paraquat; 8) atrazine + óleo vegetal; 9) testemunha não tratada. Os tratamentos da sub parcela, em número de dois, foram constituidos pelas modalidades de aplicação dos herbicidas na cobertura vegetal: 1) aplicação com a cobertura "em pé"; 2) aplicação com a cobertura "rolada". A cobertura vegetal de inverno era formada pela consorciação de aveia-preta + ervilhaca comum. Os resultados mostraram que o controle de Brachiaria plantaginea, Euphorbia heterophylla e Bidens pilosa foi melhor efetuado com os tratamentos onde entrou o atrazine. De maneira geral, o controle obtido na modalidade "em pé," foi melhor do que na modalidade "rolada," principalmente nos tratamentos com acetochlor. A análise cromatográfica de resíduos feita em amostras de solo retiradas do experimento antes e após uma chuva de 41mm ocorrida 24 horas após a aplicação dos tratamentos, mostrou que menos de 6 % do acetochlor aplicado foi detectado no solo, em ambas as modalidades de aplicação. Quanto ao atrazine, no entanto, mais de 78 % do total aplicado foi detectado no solo após a chuva na modalidade "rolada", em qualquer tratamento; neste caso, os maiores valores foram 91% para atrazine+óleo vegetal e 90% para atrazine+glyphosate+2,4D. Na modalidade "em pé'', os maiores valores foram obtidos com atrazine+óleo vegetal (77 %) e com atrazine+glyphosate+2,4D (70 %).

Eficiência do triclopyr no controle de plantas daninhas em gramado (Paspalum notatum)

As plantas daninhas interferem nos gramados, prejudicando a sua formação, qualidade e estética. O carrapicho-beiço-de-boi (Desmodium incanum) e a zórnia (Zornia latifolia), quando não controlados, podem atingir níveis de infestação que chegam a dizimar o gramado. Dentre as diversas técnicas de manejo de plantas daninhas em gramados, destaca-se o emprego de herbicidas; todavia, as informações sobre a utilização desses produtos em gramados são escassas. O objetivo deste trabalho foi avaliar a eficiência do herbicida triclopyr no controle de Desmodium incanum e Zornia latifolia, infestantes da grama-batatais (Paspalum notatum). O trabalho foi desenvolvido em gramado estabelecido no campus da Universidade Federal de Viçosa, em Viçosa-MG, entre os meses de abril e maio de 2000. Os tratamentos avaliados foram seis doses do triclopyr (0,00; 0,24; 0,48; 0,72; 0,96; e 1,20 kg ha-1) e uma dose do 2,4-D + picloram (0,48 + 0,128 kg ha-1), dispostos em delineamento experimental com blocos ao acaso e quatro repetições. O tamanho de cada parcela foi de 12 m² (4,0 x 3,0 m), sendo os tratamentos aplicados em uma faixa de 2,0 m de largura, ficando 1,0 m como testemunha lateral, para auxiliar nas avaliações visuais. Foram realizadas avaliações de fitotoxicidade aos 10 e 20 DAT (Dias Após o Tratamento) e nível de controle aos 15 e 30 DAT, ambos com base na testemunha lateral. Em nenhum dos tratamentos avaliados verificaram-se danos na qualidade do gramado. A partir das doses de 0,48 e 0,66 kg ha-1 de triclopyr foram obtidos controles iguais ou superiores a 90% de Desmodium incanum e Zornia latifolia, respectivamente. Esses resultados foram semelhantes ao do tratamento-padrão (2,4D + picloram a 0,48 + 0,128 kg ha-1). Concluiu-se que o triclopyr mostrou-se seletivo para grama-batatais, proporcionando excelente controle das plantas daninhas acima mencionadas.

Curvas de dose-resposta para avaliação do controle de fluxos de emergência de plantas daninhas pelo herbicida imazapic

O objetivo deste trabalho foi avaliar o controle de dois fluxos de emergência das plantas daninhas capim-marmelada (Brachiaria plantaginea) e capim-colchão (Digitaria horizontalis) pelo herbicida imazapic, aplicado em condição de pré-emergência, por meio de curvas de dose-resposta. O delineamento experimental foi o de blocos ao acaso, com quatro repetições; cada parcela constou de um vaso de 3 L de capacidade, preenchido com solo argiloso, acrescido de sementes de capim-marmelada e capim-colchão. Sendo D a dose recomendada do imazapic (140 g ha-1), os tratamentos foram: 4D, 2D, D, 1/2D, 1/4D, 1/8D, 1/16D e ausência do herbicida. Foram realizadas avaliações visuais de controle aos 30 e 60 dias após a infestação (DAI) e de massa seca aos 60 DAI. Após a colheita da biomassa resultante do primeiro fluxo de emergência presente nas parcelas, os vasos foram novamente semeados com as plantas daninhas e foram realizadas novas avaliações de controle aos 30 e 60 dias após reinfestação (DAR) e de massa seca aos 60 DAR. A partir dos resultados obtidos, pode-se afirmar que: o imazapic inibiu o desenvolvimento de ambas as plantas daninhas, alcançando resultados superiores a 80% de controle em todas as avaliações, para a dose recomendada, nos dois fluxos de emergência; a eficácia no controle de capim-colchão foi ligeiramente superior à do controle do capim-marmelada; e o herbicida imazapic apresentou-se como uma opção interessante para manejo dessas plantas daninhas.

Carfentrazone-ethyl aplicado em pós-emergência para o controle de Ipomea spp. e Commelina benghalensis na cultura da cana-de-açúcar

Este trabalho teve como objetivos determinar a eficácia e seletividade do carfentrazone-ethyl no controle de plantas daninhas na cultura da cana-de-açúcar e avaliar curvas de dose-resposta desse herbicida em Ipomoea spp. e Commelina benghalensis. Desenvolveu-se um ensaio de campo, em pós-emergência das plantas daninhas e da cultura (cv. RB72-454). O delineamento experimental utilizado foi do tipo blocos ao acaso, com os seguintes tratamentos: carfentrazone a 5, 10, 20, 30 e 50 g ha-1 e metribuzin a 2.400 g ha-1. As plantas daninhas que infestavam a área eram Ipomoea nil, I. grandifolia, I. quamoclit, Momordica charantia e C. benghalensis. As avaliações de controle visual e fitotoxicidade foram realizadas aos 15, 30 e 45 dias após a aplicação dos herbicidas. Para elaboração das curvas de dose-resposta, um experimento foi instalado em casa de vegetação, com as plantas daninhas I. nil, I. hederifolia, I. grandifolia, I. quamoclit e C. benghalensis. As doses do herbicida carfentrazone foram: 10D, 4D, 2D, D, 0,5D, 0,25D, 0,125D, 0,1D e 0,01D, em que D = 20 g ha¹. Os dados foram analisados a partir de curvas de dose-resposta de controle visual e massa fresca. No experimento de campo, observou-se excelente controle das plantas daninhas, sendo a dose de 50 g ha-1 de carfentrazone a mais eficiente. Nenhum tratamento causou danos à cana-de-açúcar. O experimento de casa de vegetação permitiu concluir que a ordem decrescente de sensibilidade das espécies de corda-de-viola ao carfentrazone-ethyl é: I. hederifolia > I. quamoclit > I. nil > I. grandifolia; e que C. benghalensis é controlada pelo carfentrazone a partir da dose de 5 g ha-1.