Role of Neutralizing Antibodies in Adults With Community-Acquired Pneumonia by Respiratory Syncytial Virus

Background. Respiratory syncytial virus (RSV) has been implicated in the etiology of adult community-acquired pneumonia (CAP). We investigated RSV infection in Chilean adults with CAP using direct viral detection, real-time reverse-transcription polymerase chain reaction (rtRT-PCR), and serology (microneutralization assay). Methods. RSV, other respiratory viruses, and bacteria were studied by conventional and molecular techniques in adults aged >= 18 years presenting with CAP to the healthcare facilities in Santiago, Chile from February 2005 through December 2007. Results. All 356 adults with CAP enrolled had an acute blood sample collected at enrollment, and 184 had a convalescent blood sample. RSV was detected in 48 cases (13.4%). Immunofluorescence assay and viral isolation each detected only 1 infection (0.2%), whereas rtRT-PCR was positive in 32 (8.9%) cases and serology was positive in 20 (10.8%) cases. CAP clinical characteristics were similar in RSV-infected and non-RSV-infected cases. RSV-specific geometric mean serum-neutralizing antibody titer (GMST) was significantly lower at admission in the 48 RSV-infected cases compared with 308 non-RSV-infected adults (GMST in log(2): RSV/A 8.1 vs 8.9, and RSV/B 9.3 vs 10.4; P < .02). Conclusions. RSV infection is frequent in Chilean adults with CAP. Microneutralization assay was as sensitive as rtRT-PCR in detecting RSV infection and is a good adjunct assay for diagnostic research. High RSV-specific serum-neutralizing antibody levels were associated with protection against common and severe infection. The development of a vaccine could prevent RSV-related CAP in adults.

Algumas concepções de alunos do ensino médio a respeito das proteínas

O conceito de proteína e sua síntese são importantes para a compreensão de processos em biotecnologia, por exemplo, a produção de novos fármacos, área em avanço nas últimas décadas. Assim, o objetivo desse trabalho foi verificar, dentre alunos do Ensino Médio, quais tipos de concepções eles têm ou trazem sobre proteína e síntese proteica, e que tipo de influência pode ter contribuído para a formulação de tais concepções, através de um questionário diagnóstico, composto por questões abertas, aplicado a 133 alunos de uma escola pública e de uma particular. Os resultados analisados basearam-se em categorização de respostas. Concluímos que, mesmo os alunos já tendo estudado assuntos relativos a proteínas, ainda carregavam traços de concepções alternativas, o que forneceu informações valiosas sobre possíveis falhas no processo de aprendizagem. Assim, para que haja uma "ressignificação" desses conceitos, é necessário que as discussões desse tema sejam ampliadas, vinculando-os aos conteúdos correlatos previamente trabalhados.

Sensing the "LUV" with HST+COS in Cycle 20 and beyond

New Cosmic Origins Spectrograph (COS) observing modes have extended the Hubble Space Telescope's spectral range to wavelengths between 900-1150 Å. However, the G140L/1280 and the Cycle 19 available G130M central wavelengths (1055 and 1096) that sample below 1150 Å were only available at focus positions which provided low-resolution (R<3,000). For HST Cycle 20, we introduced a new G130M/1222 central wavelength that covers 1065-1365 Å with R>10,000 everywhere, but optimized for 15000 from 1080-1200 Å. This mode places geo-coronal Lyα between the COS FUV detector segments to minimize detector gain sag. Also for Cycle 20, the resolution of the G130M/1055 and 1096 modes will be increased by a factor of 3-4 by optimizing the focus positions for these modes. This will give HST approximately the effective area of FUSE over the FUSE bandpass at 10,000. Here we present the current calibration status of the COS G130M/1055, 1096, and 1222 central wavelength settings at the original and second FUV lifetime positions with an emphasis on observing over the "Lyman UV", or "LUV", 912-1216 Å.

Type Ia Supernovae : Homogeneity and Diversity

The use of type Ia supernovae as distance estimators has shown that about 75% of the energy content of the universe has a negative equation of state parameter and thus, drives the acceleration of the universe. Constraining the exact nature of this energy is one of the main goals in cosmology. As the statistics of observed high-redshift supernovae increases, systematic effects become the limiting factor to pursue such investigations, thus deeper understanding of the physical properties of SNe is of great importance. In this thesis we investigate spectral homogeneity and diversity of local and high redshift supernovae. Special emphasis has been given to the analysis of optical spectra of local peculiar supernovae 1999aa and 1999ac. The study of the spectra of SN 1999aa pointed out that this SN could be a link between the extreme peculiar SN 1991T and normal SNe. Moreover, the identification of a high velocity component of Ca II and possibly of a low velocity component of C III suggests some degree of asphericity in the ejecta of this supernova. Evidence for a deflagration of a C+O white dwarf was found in the early spectra of SN 1999ac. The spectral proprieties of a vast sample of local SNe are also studied by means of newly introduced spectral indicators. These were used to possibly improve the intrinsic spread of SN peak magnitudes to 0.15 mag, independently of light curve parameters. The first quantitative comparison between local and high redshift supernova is carried out. No evidence for extreme peculiar sub-luminous SNe was found in our data set including 13 SNe with redshift range z=0.279-0.912. Furthermore, SN2002fd (z=0.279) was found to show spectral characteristics similar to SN 1991T/SN 1999aa-like supernovae. We also present a feasibility study of the Hubble diagram in rest frame I-band up to z~0.5, and show the possibility to probe the presence of intergalactic dust, which could possibly mimic the effect of dark energy in the Hubble diagram.

Constraint handling rules. Compositional semantics and program transformation

This thesis intends to investigate two aspects of Constraint Handling Rules (CHR). It proposes a compositional semantics and a technique for program transformation. CHR is a concurrent committed-choice constraint logic programming language consisting of guarded rules, which transform multi-sets of atomic formulas (constraints) into simpler ones until exhaustion [Frü06] and it belongs to the declarative languages family. It was initially designed for writing constraint solvers but it has recently also proven to be a general purpose language, being as it is Turing equivalent [SSD05a]. Compositionality is the first CHR aspect to be considered. A trace based compositional semantics for CHR was previously defined in [DGM05]. The reference operational semantics for such a compositional model was the original operational semantics for CHR which, due to the propagation rule, admits trivial non-termination. In this thesis we extend the work of [DGM05] by introducing a more refined trace based compositional semantics which also includes the history. The use of history is a well-known technique in CHR which permits us to trace the application of propagation rules and consequently it permits trivial non-termination avoidance [Abd97, DSGdlBH04]. Naturally, the reference operational semantics, of our new compositional one, uses history to avoid trivial non-termination too. Program transformation is the second CHR aspect to be considered, with particular regard to the unfolding technique. Said technique is an appealing approach which allows us to optimize a given program and in more detail to improve run-time efficiency or spaceconsumption. Essentially it consists of a sequence of syntactic program manipulations which preserve a kind of semantic equivalence called qualified answer [Frü98], between the original program and the transformed ones. The unfolding technique is one of the basic operations which is used by most program transformation systems. It consists in the replacement of a procedure-call by its definition. In CHR every conjunction of constraints can be considered as a procedure-call, every CHR rule can be considered as a procedure and the body of said rule represents the definition of the call. While there is a large body of literature on transformation and unfolding of sequential programs, very few papers have addressed this issue for concurrent languages. We define an unfolding rule, show its correctness and discuss some conditions in which it can be used to delete an unfolded rule while preserving the meaning of the original program. Finally, confluence and termination maintenance between the original and transformed programs are shown. This thesis is organized in the following manner. Chapter 1 gives some general notion about CHR. Section 1.1 outlines the history of programming languages with particular attention to CHR and related languages. Then, Section 1.2 introduces CHR using examples. Section 1.3 gives some preliminaries which will be used during the thesis. Subsequentely, Section 1.4 introduces the syntax and the operational and declarative semantics for the first CHR language proposed. Finally, the methodologies to solve the problem of trivial non-termination related to propagation rules are discussed in Section 1.5. Chapter 2 introduces a compositional semantics for CHR where the propagation rules are considered. In particular, Section 2.1 contains the definition of the semantics. Hence, Section 2.2 presents the compositionality results. Afterwards Section 2.3 expounds upon the correctness results. Chapter 3 presents a particular program transformation known as unfolding. This transformation needs a particular syntax called annotated which is introduced in Section 3.1 and its related modified operational semantics !0t is presented in Section 3.2. Subsequently, Section 3.3 defines the unfolding rule and prove its correctness. Then, in Section 3.4 the problems related to the replacement of a rule by its unfolded version are discussed and this in turn gives a correctness condition which holds for a specific class of rules. Section 3.5 proves that confluence and termination are preserved by the program modifications introduced. Finally, Chapter 4 concludes by discussing related works and directions for future work.

Lingue meno diffuse e corpora: studio empirico sulla terminologia amministrativa ladina

This study aims to the elaboration of juridical and administrative terminology in Ladin language, actually on the Ladin idiom spoken in Val Badia. The necessity of this study is strictly connected to the fact that in South Tyrol the Ladin language is not just safeguarded, but the editing of administrative and normative text is guaranteed by law. This means that there is a need for a unique terminology in order to support translators and editors of specialised texts. The starting point of this study are, on one side the need of a unique terminology, and on the other side the translation work done till now from the employees of the public administration in Ladin language. In order to document their efforts a corpus made up of digitalized administrative and normative documents was build. The first two chapters focuses on the state of the art of projects on terminology and corpus linguistics for lesser used languages. The information were collected thanks to the help of institutes, universities and researchers dealing with lesser used languages. The third chapter focuses on the development of administrative language in Ladin language and the fourth chapter focuses on the creation of the trilingual Italian – German – Ladin corpus made up of administrative and normative documents. The last chapter deals with the methodologies applied in order to elaborate the terminology entries in Ladin language though the use of the trilingual corpus. Starting from the terminology entry all steps are described, from term extraction, to the extraction of equivalents, contexts and definitions and of course also of the elaboration of translation proposals for not found equivalences. Finally the problems referring to the elaboration of terminology in Ladin language are illustrated.

Präzisionsmessung des magnetischen Moments des Elektrons in wasserstoffähnlichem Kohlenstoff

In dieser Arbeit wird eine Messung des magnetischen Moments des Elektronsin wasserstoffähnlichem Kohlenstoff vorgestellt. Das Ergebnis derMessungen an einem einzelnen gespeicherten¹²C⁵⁺-Ionist: g = 2,001 041 596 4 (8)(6)(44). Der erste Fehler bezeichnet die statistischeUnsicherheit, der zweite Fehler die systematische Unsicherheit. Der letzteFehler resultiert aus der Unsicherheit des Verhältnisses der Massedes ¹²C⁵⁺-Ions und der des Elektrons. Die hohe Genauigkeitder Messung wurde durch die räumliche Trennung des Nachweises derAusrichtung des Spins und des Induzierens der spin-flips erreicht. DieMessung stellt die bisher genaueste Bestimmung eines atomaren g-Faktorsdar und bestätigt den theoretischen Wert der Göteborger Theoriegruppeauf 7*10^-9. Zusammen mit diesen Rechnungen verifiziert sie dieBound-State-QED-Korrekturen genauer als 1%. Somit ist der g-Faktor desin¹²C⁵⁺ gebunden Elektrons neben Messungen der Lambshiftin schweren hochgeladenen Ionen der genaueste Test der Bound-State-QED.
Wird auf die Richtigkeit der Berechnung des g-Faktors des gebundenenElektrons vertraut, kann folgender Wert für die atomare Masse desElektrons gewonnen werden: m_e= 0,000 548 579 912 8 (15) u.

Strukturbildung in dünnen Filmen aus Mischungen statistischer Copolymere

Dünne Polymerfilme besitzen einen weiten Anwendungsbereich in vielen High-Tech Applikationen. All diese Anwendungen erfordern ein bestimmtes Anwendungsprofil des dünnen Films. Diese Anforderungen umschließen sowohl die physikalischen Eigenschaften des Films als auch seine Struktur. Um sie zu realisieren, werden oftmals Mischungsfilme aus verschiedenen Polymeren verwendet. Diese neigen jedoch in vielen Fällen zur bereits während der Präparation zu Phasenseparation.Vor diesem Hintergrund wurde untersucht welchen Einfluss die Verträglichkeit der gemischten Polymere auf die Strukturbildung des dünnen Films ausüben. Als Modellsystem hierfür dienten Mischungen statistischer Poly-styrol-stat-para brom-styrol Copolymere.Die Oberflächenstrukturen, die sich währen der Präparation der Mischungsfilme einstellten, wurden mit Rasterkraftmikroskopie untersucht. wobei die Topologie einer statistischen Analyse unterzogen wurde. Zum einen wurde hierzu die spektrale Leistungsdichte der Oberflächenkontour zum anderen die zugehörigen Minkowski-Funktionale berechnet.Neben Oberflächenstrukturen bilden sich während der Präparation auch Entmischungsstrukturen im inneren des Filmes. Zur Charakterisierung dieser Strukturen wurden die Filme durch Streuung unter streifendem Einfall untersucht. Durch eine modellfreie Interpretation der Streuexperimente gelang der Nachweis der inneren StrukturenFür nur schwach unverträglich Filme konnte auf Basis der Streuexperimente eine Replikation der Oberflächenstruktur des Substrates auf die Filmoberflächen nachgewiesen werden. Diese Replikation wurde für verschieden raue Substrate und bezueglich der Kinetik ihrer Abnahme beim Quellen der Filme untersucht.

Verifiche numeriche dello stato di sollecitazione di una struttura alare di un velivolo ultraleggero

Lo scopo del progetto è di calcolare, tramite un modello agli elementi finiti, lo stato di sollecitazione delle parti costituenti l’ala di un velivolo ultraleggero, e di visualizzare i risultati della soluzione del calcolo in maniera grafica. L’aeromobile oggetto di studio è lo Yuma 912 S commercializzato da Alisport, un velivolo di categoria ULM (UltraLeggero Motorizzato) con capacità STOL (Short TakeOff and Landing – decollo ed atterraggio corti). Tutto il lavoro di progettazione, modellazione e calcolo è stato eseguito con un’unica tipologia di programma, CATIA V5, disponibile commercialmente, al fine di evitare conflitti tra diversi programmi CAD (per disegno assistito dal calcolatore) e CAE/FEA (per analisi ingegneristica del prodotto). Il lavoro si è articolato nelle seguenti fasi: progettazione assistita dal calcolatore, sviluppo del modello, valutazione della soluzione. I carichi introdotti nell’analisi sono stati scelti considerando le caratteristiche del velivolo ed il proprio diagramma di manovra, quindi calcolati in maniera teorica e successivamente applicati al modello in esame. La soluzione è stata poi visualizzata tramite simulazione della struttura deformata ed applicazione di una scala di colori sulle zone sottoposte ai diversi stati di sollecitazione.

Micro-FEM models based on micro-CT reconstructions for the in vitro characterization of the elastic properties of trabecular bone tissue.

This master’s thesis describes the research done at the Medical Technology Laboratory (LTM) of the Rizzoli Orthopedic Institute (IOR, Bologna, Italy), which focused on the characterization of the elastic properties of the trabecular bone tissue, starting from october 2012 to present. The approach uses computed microtomography to characterize the architecture of trabecular bone specimens. With the information obtained from the scanner, specimen-specific models of trabecular bone are generated for the solution with the Finite Element Method (FEM). Along with the FEM modelling, mechanical tests are performed over the same reconstructed bone portions. From the linear-elastic stage of mechanical tests presented by experimental results, it is possible to estimate the mechanical properties of the trabecular bone tissue. After a brief introduction on the biomechanics of the trabecular bone (chapter 1) and on the characterization of the mechanics of its tissue using FEM models (chapter 2), the reliability analysis of an experimental procedure is explained (chapter 3), based on the high-scalable numerical solver ParFE. In chapter 4, the sensitivity analyses on two different parameters for micro-FEM model’s reconstruction are presented. Once the reliability of the modeling strategy has been shown, a recent layout for experimental test, developed in LTM, is presented (chapter 5). Moreover, the results of the application of the new layout are discussed, with a stress on the difficulties connected to it and observed during the tests. Finally, a prototype experimental layout for the measure of deformations in trabecular bone specimens is presented (chapter 6). This procedure is based on the Digital Image Correlation method and is currently under development in LTM.