Pontes metálicas em ambiente marítimo

O principal objectivo deste trabalho é fornecer um panorama geral sobre a metodologia a adoptar na reabilitação de pontes metálicas, em particular no que toca à avaliação de danos e reparação, e focar a importância destas obras de arte enquanto legado histórico. Neste sentido, primeiro é apresentada a evolução histórica das pontes metálicas, no mundo e em Portugal, particularmente ao nível de materiais e soluções estruturais. Em seguida, é apresentada uma síntese sobre os principais processos de deterioração e as metodologias a aplicar na reabilitação de pontes metálicas, incluindo a avaliação do estado de conservação e a reparação e protecção dos elementos metálicos. O capítulo da avaliação contém uma abordagem geral à inspecção visual, assim como aos métodos de ensaio não destrutivos e destrutivos que podem ser aplicados na avaliação do estado de conservação. O capítulo da reparação descreve os vários métodos de reparação, aspectos críticos da sua aplicação e campo de aplicação. No último capítulo, sintetizam-se os aspectos mais relevantes na protecção de elementos metálicos, fornecendo informação sobre os sistemas mais utilizados e indicações a ter em conta na sua selecção.

Pontes antigas na Ilha da Madeira: caraterização e diagnóstico

Na Ilha da Madeira existem diversas pontes antigas essencialmente de alvenaria de pedra e algumas de betão, que constituem um valioso património histórico, que importa conhecer e conservar. As pontes supracitadas pertencem às diversas Estradas Regionais e desempenham um papel importante na deslocação diária de milhares de pessoas entre diversas povoações vizinhas. Estas pontes antigas encontram-se sujeitas a mecanismos de deterioração e a um tráfego mais exigente do que o projetado, evidenciando assim as mais variadas anomalias. Com o intuito de assegurar o seu bom funcionamento e as atuais condições de segurança, deve-se proceder a uma manutenção periódica, sendo para tal necessário recorrer a inspeções regulares. Nesta dissertação realizou-se um levantamento do maior número possível de obras de arte antigas da Ilha da Madeira. Este levantamento consistiu numa inspeção visual e no preenchimento de uma ficha de inspeção previamente realizada, por cada obra de arte. Após o levantamento procedeu-se a uma análise estatística de modo: a caraterizar estas obras de arte, identificar as principais anomalias e o seu estado de conservação e de manutenção globais. Identificou-se ainda algumas soluções típicas de reabilitação. Observou-se que a maioria das obras de arte antigas da Ilha da Madeira que pertencem à rede rodoviária regional são do tipo ponte, sendo constituídas por arcos simples e o material utilizado é essencialmente a alvenaria de pedra e o betão. As principais anomalias identificadas foram de caráter não estrutural, como a presença de vegetação e poluição biológica. Concluiu-se que estas apresentam-se na generalidade bem conservadas, no entanto os trabalhos de manutenção são importantes para manterem o bom funcionamento e segurança das pontes a longo prazo.

O impacto do conhecimento concreto na aprendizagem escolar: a inovação das práticas pedagógicas é o caminho possível?

Este estudo pleiteia a discussão acerca do conhecimento concreto da criança que aprende com mais autonômia, como ferramenta indispensável para construir práticas pedagógicas inovadoras, tendo o docente como seu mediador. No intuito de compreender a inovação pedagógica o locus pesquisado foi o Grupo Escolar Luís Viana Filho localizada no município de Ibirapitanga - Bahia - Brasil, na tentativa de compreender os saberes e as práxis utilizadas como valorização do saber científico. Trata-se de uma pesquisa etnográfica, na qual se compreende a criança e o docente como sujeitos protagonistas do processo de construção efetiva de saberes, percebendo a importância da escola como um dos ambientes propiciadores da construção de aprendizagens. Os resultados permitiram refletir acerca da postura tanto dos alunos quanto do professor no desenvolvimento do cotidiano da sala de aula, valorizando os diversos ambientes sociais como espaços de aprendizagens e priorizando a atuação da criança como desveladora de seus próprios saberes.

Estruturas cerâmicas a base de zircônia e alumina utilizadas na confecção de infra - estruturas para coroas e pontes fixas

The continuous advances in ceramic systems for crowns and bridges infrastructure getting researchers and manufacturers looking for a material that has good mechanical properties and aesthetic. The purpose of this study was to verify in which composition and sintering temperature the ceramic system for infrastructure composed of alumina and zirconia would have the best mechanical properties. With this objective we made in UFRN laboratories 45 test bodies in the form of rectangular bars with the following dimensions: 30mm x 8mm x 3mm, where we separated by the sintering temperature: 1200°C, 1300ºC and 1400ºC, and by comp osition: 33% Zirconia + 67% Alumina; 50% Zirconia + 50% Alumina and 25% Zirconia + 75% Alumina, these test bodies were not infiltrated with glass. Also, were made nine test bodies by a technical from a laboratory with a commercial ceramic system: in the Ceram Zircônia (Vita - Zahnfabrik) with the following dimensions: 20mm x 10mm x 0.5mm, these test bodies following all recommendations of the manufacturer and were infiltrated with glass. Were realized optical and electronic microscopy analyses, hardness testing, resistance to bending in three points, porosity and bulk density. After analysis of the results we verified that with the increasing of sintering temperature, increased the value of resistance to bending, but with the same temperature there was no significant difference between the different compositions, samples made with the commercial ceramic that were infiltrated, presented a resistance to bending six times greater than the samples sintered to 1400°C and which have not been infiltra ted. There was no significant difference between the values of apparent porosity for the samples made in UFRN laboratories, but the samples of commercial ceramic obtained 0% in porosity apparent value. In tests of Rockwell Hardness there is an increase in the value of Hardness, with the increase of sintering temperature for the samples not infiltrated. Samples infiltrated showed similar values as the samples sintered in 1400°C. There was no significant difference between the values of apparent density among samples manufactured in UFRN laboratories and samples made with a commercial ceramic

Estudo do comportamento plástico, mecânico, microestrutural e térmico do concreto produzido com resíduo de porcelanato

Population growth experienced in major cities, allied to society s need of infra-structure, especially ones related to habitational demands, increases the consumption of construction materials. As a consequence, consumption of natural resources itself. Thus, due to this process, concrete is one of the most produced materials in civil construction. This is also due to the great diversity of its application, easiness in its execution and adequate mechanical performance, as well as low production costs. Following the same tendencies in construction development, the ceramic industry has intensified the production of porcelain ceramic tiles and floors. These are achieved by a fine finishing and receive polishing at the end of the fabrication process. This work researched the use of porcelain residues in polishing for the production of concrete. All of which; due to economical and environmental issues. This process aims to prove adequate destiny for this type of residue, due to environmental issues, incorporating it to the concrete itself; all of which provides economy in consumption of the materials that constitute concrete. Thus, the main characteristics of concrete were investigated through the inclusion of different concentration of the porcelain residue as additional trait element. The residue rates incorporated to the trait varied from 10% to 50% in relation to the cement mass, in the traits with plastic additives and without plastic additives. It is observed that the inclusion of porcelain residue produced a meaningful alteration in the consistency of fresh concrete. This residue has a fine granulometry and it considerably absorbed the water used in the concrete spreading, influencing the way this material is dealt with. Thus, the value of cement striking decreases with the increase of residues present in trait. The maximal incorporation of the residue was of 50%, massively, for the same factor water/initial cement. The use of residues in concrete results in an 40% increase in the compression resistance. It is also proportional to residue concentration of porcelain in the trait. The microstructure was also favored once porosity and concrete absorption decreases with the use of this residue. The parameters demonstrate the quality and durability of the concrete produced with this residue. The use of porcelain residue in concrete composition has not produced meaningful thermal behavior changes. Thermal conductivity, heat capacity and thermal diffusivity have been maintained basically constant

Estudo de revestimentos inorgânicos com inibidor de corrosão aplicado na superfície do concreto

The corrosive phenomenon on reinforced concrete structures is one of the most founded pathologies on the coastal area. With the objective to prevent the process development, or even, retard its beginning, it was studied the application of inorganic covering over concrete surfaces, after its cure, as well as, evaluate the efficiency of the covering applied on the concrete in reducing its porosity of concrete preventing the entrance of aggressive agents to preserve the integrity of the existing armor inside it, comparing the result obtained with the body-of-proof reference, that didn´t receive covering protection. On the concrete production it was used Portland Cement CP II 32, coarse aggregate, fine aggregate and water from the local distributive. Two types of covering were used, one resin based of silicon and solvent and other white cement based, selected sands and acrylic resin. The concrete mixture adopted was 1:1,5:2,5 (cement, fine aggregate, coarse aggregate) and 0.50 water/cement ratio. With the concrete on fresh state was made the experiment test to determinate the workability. On the hardened state was made the concrete resistance experiment, absorption of water and electrochemical experiments, through polarization curves. Also was held optical microscopy and Scanning Electron Microscopy experiments to analyze the layer of the covering applied to the concrete surface and the interface between the concrete and the layer. The obtained results shows that the covering applied to the concrete surface didn´t affect the resistance towards compression. On the absorption of water occurred a diminution of the percentage absorbed, improving the concrete development by making it more impermeable towards the entrance of aggressive agents. The electrochemical experiment results confirmed the water absorption results; the body-of-proof covered presented larger protection towards the development of corrosives process and retarded the evolution of the corrosive phenomenon

Concreto celular polimérico: influência na adição de resíduo de poliéster insaturado termofixo

This work addresses the production of lightweight concrete building elements, such as plates, prefabricated slabs for pre-molded and panels of fencing, presenting a singular concrete: the Lightweight Concrete, with special properties such low density and good strength, by means of the joint use of industrial waste of thermosetting unsaturated polyesters and biodegradable foaming agent, named Polymeric Lightweight Concrete. This study covered various features of the materials used in the composition of the Polymeric Lightweight Concrete, using a planning of factorial design 23, aiming at studying of the strength, production, dosage processes, characterization of mechanical properties and microstructural analysis of the transition zone between the light artificial aggregate and the matrix of cement. The results of the mechanical strength tests were analyzed using a computational statistics tool (Statistica software) to understand the behavior and obtain the ideal quantity of each material used in the formula of the Polymeric Lightweight Concrete. The definition of the ideal formula has the purpose of obtaining a material with the lowest possible dry density and resistance to compression in accordance with NBR 12.646/92 (≥ 2.5 MPa after 28 days). In the microstructural characterization by scanning electron microscopy it was observed an influence of the materials in the process of cement hydration, showing good interaction between the wrinkled face of the residue of unsaturated polyesters thermosetting and putty and, consequently, the final strength. The attaining of an ideal formula, given the Brazilian standards, the experimental results obtained in the characterization and comparison of these results with conventional materials, confirmed that the developed Polymeric Lightweight Concrete is suitable for the production of building elements that are advantageous for construction

Estudo da substituição de agregados miúdos naturais por pó de pedra em concreto de cimento portland

The sharp consumption of natural resources by the construction industry has motivated numerous studies concerning the application of waste to replace partially or fully, some materials, such as aggregates, thereby reducing the environmental impact caused by the extraction of sand and crushing process. The application of stone dust from crushing process arising as an aggregate for the production of Portland cement concrete is a viable alternative in view of the high cost of natural sands, in addition to the environmental damage which causes its operation to the environment. The stone dust has reduced cost compared to natural sand because it is produced in the beds of their own quarries, which are usually located close to major urban centers. This study examined the feasibility of using stone dust from the crushing of rock gneisses in the state of Bahia, replacing natural quartz sand. In the development of scientific study was conducted to characterize physical and chemical raw materials applied and molded cylindrical specimens , using as reference values Fck 20, Fck 25 and Fck 30 MPa ( resistance characteristic of the concrete after 28 days) in following compositions stone powder: 10%, 30%, 50 %, 100% and 100% with additive. The specimens were cured and subjected to the tests of compressive strength and water absorption, then the samples were subjected to the tests of X-ray diffraction and scanning electron microscopy. The results obtained showed that the composition with 10% stone powder showed the best results regarding the physical and mechanical tests performed, confirming the reduction in compressive strength and increased water uptake increased as the content of the powder stone in the concrete composition

Efeitos do tratamento superficial da sílica ativa com soluções de ácidos nítrico e fosfórico em propriedades do concreto

The addition of active silica potentially improves the quality of concrete due to its high reactivity and pore refinement effect. The reactivity of silica is likely related to its charge density. Variations in surface charge alter the reactivity of the material consequently affecting the properties of concrete. The present study aimed at investigating variations in the charge density of silica as a function of acid treatments using nitric or phosphoric acid and different pH values (2.0, 4.0 and 6.0). Effects on concrete properties including slump, mechanical strength, permeability and chloride corrosion were evaluated. To that end, a statistical analysis was carried out and empirical models that correlate studied parameters (pH, acid and cement) with concrete properties were established. The quality of the models was tested by variance analysis. The results revealed that the addition of silica was efficiency in improving the properties of concrete, especially the electrochemical parameters. The addition of silica treated using nitric acid at pH = 4.0 displayed the best cement performance including highest strength, reduced permeability and lowest corrosion current

Estudo de inibidores de corrosão em concreto armado, visando a melhoria na sua durabilidade

This thesis has as objective presents a methodology to evaluate the behavior of the corrosion inhibitors sodium nitrite, sodium dichromate and sodium molybdate, as well as your mixture, the corrosion process for the built-in steel in the reinforced concrete, through different techniques electrochemical, as well as the mechanical properties of that concrete non conventional. The addition of the inhibitors was studied in the concrete in the proportions from 0.5 to 3.5 % regarding the cement mass, isolated or in the mixture, with concrete mixture proportions of 1.0:1.5:2.5 (cement, fine aggregate and coarse aggregate), superplasticizers 2.0 % and 0.40 water/cement ratio. In the modified concrete resistance rehearsals they were accomplished to the compression, consistence and the absorption of water, while to analyze the built-in steel in the concrete the rehearsals of polarization curves they were made. They were also execute, rehearsals of corrosion potential and polarization resistance with intention of diagnose the beginning of the corrosion of the armors inserted in body-of-proof submitted to an accelerated exhibition in immersion cycle and drying to the air. It was concluded, that among the studied inhibitors sodium nitrite , in the proportion of 2.0 % in relation to the mass of the cement, presented the best capacity of protection of the steel through all the studied techniques and that the methodology and the monitoring techniques used in this work, they were shown appropriate to evaluate the behavior and the efficiency of the inhibitors

A reestruturação produtiva e as novas formas de organização do trabalho: a experiência do transporte alternativo no município de Belém/PA

The study made in this thesis analyzes the new form of work organization at the urban collective transportation sector, so called Altemative Transportation which is a new form of public transportation that appears in the Brazilian urban context by the mid ninety' s, this work is made by independent or sub-contracted workers, usually organized in cooperatives . It reflects the investigation of new forms of precarious work, unformal which has been expanding in the urban transportation sector. Thus, discusses non regulation of the services sector problem the ways of survival of exc1uded workers from the formal work market mainly afier the capital productive restructure. It has as privileged area of investigation, the sector policy of urban transportation that make field of the main nets of political articulations that define the dynamic of the urban space. It is known that the urban collective transportation allows the access to the production, circulation and general consumption being necessary to the mobility of the resident population, mainly to those with low purchasing capacity. It becomes a field of empirical investigation at the Belem municipal, located at the Amazonic region - north Brazil. The main points dealed on this research start from concrete relations from the daily life of workers that deve1op their activity on the altemative transport mediated with theoretical references needed for understanding and interpretation of the studied reality. The investigation strategies were built from the abstract (theorical knowledge produced for the reality analyze) in concrete by the investigation quantitative-qualitative from this area of urban policy, making up possible the formation of a references chart to the analyses of the studied subject. Rescue his historicity, from characterization of the urban space of the metropolitan region of Belem passing true the forms of organization and urban services performances while essential production and reproduction element of the social relations. Identifies the main individuals that historically have been participating in the construction of the municipality transport policy and the ways of expression of the local political strength relations. Outstand the State paper on the net of established relations near the local power, as well as outstand the importance of social sciences in the understanding of urban policies in the transportation area, trying to bring input to the academicals -scientific debate .The above e1ected and mentioned points in this study are crucial for a critical reflection of the transportation policies. That relation is not given, but historically built at the power relation chart that makes up this unique area of the urban policies

Efetivação da garantia de defesa no estado constitucional de direito: colisão entre o poder punitivo e garantia de defesa

The domination of the violence for the Rule of law awakened a tension between the practice of the punitive power and the right to counsel. However, throughout the recent history of the Criminal law, this shock of forces has been determined for the punitive power. In this perspective, the present work intends to submit the guarantee of defense to a critical judgment, in search to conciliate its content to the Constitutional State of Right. For in such a way, it will be necessary to recognize the disequilibrium of the situation, but without considering the superiority of any of these elements. The State in such a way must fulfill the function to punish the culprits as to acquit the innocents. Despite the law is far from obtaining a harmonious speech, it is necessary that the defense guarantee coexists the punitive power as part of an only public interest, which is, to make criminal justice. In such a way, the existence of a sustainable balance between the punitive power and the guarantee of defense depend on the minimum interference of Criminal law and, also, of the judicial position in the concrete case. The present work faces, therefore, the moment of crisis of the Criminal law, consolidated with the advent of a new way of thinking according to the procedural guarantees, that will demand the overcoming of the old concepts. The Constitutional State of Right not only constitutes an efectiveness of the regime of the right to counsel, but in a similar way it searchs to accomplish the right of action and criminal justice as a whole. Knowing that the philosophy of the language raises doubts on the certainty, the truth and the judgement, it is imposed to understand that the defense guarantee is no more about a simple idea, but, in the crooked ways of the communication, we intend to find what the judge s function is when he faces this new reality

A objetivação do controle concreto de constitucionalidade nas decisões do Supremo Tribunal Federal

The independence of the United States and the revolutions that emerged in Europe in the eighteenth century led to the birth of the written constitution, with a mission to limit the power of the State and to ensure fundamental rights to citizens. Thus, the Constitution has become the norm and ultimate founding of the State. Because of this superiority felt the need to protect her, emerging from that constitutional jurisdiction, taking control of constitutionality of provisions his main instrument. In Brazil, the constitutionality control began with the Constitution of 1891, when "imported" the American model, which is named after incidental diffuse model of judicial review. Indeed, allowed that any judge or court could declare the unconstitutionality of the law or normative act in a concrete case. However, the Brazilian Constituent did not bring the U.S. Institute of stare decisis, by which the precedents of higher courts eventually link the below. Because of this lack, each tribunal Brazilian freely decide about the constitutionality of a rule, so that the decision took effect only between the parties to the dispute. This prompted the emergence of conflicting decisions between judicantes organs, which ultimately undermine legal certainty and the image of the judiciary. As a solution to the problem, was incorporated from the 1934 Constitution to rule that the Senate would suspend the law declared unconstitutional by the Supreme Court. With the introduction of abstract control of constitutionality, since 1965, the Supreme Court went on to also have the power to declare the invalidity of the provision unconstitutional, effectively against all without the need for the participation of the Senate. However, it remained the view that in case the Supreme Court declared the unconstitutionality of the fuzzy control law by the Senate would continue with the competence to suspend the law unconstitutional, thus the decision of the Praetorium Exalted restricted parties. The 1988 Constitution strengthened the abstract control expanding legitimized the Declaratory Action of Unconstitutionality and creating new mechanisms of abstract control. Adding to this, the Constitutional Amendment. No. 45/2004 brought the requirement of general repercussion and created the Office of Binding Precedent, both to be applied by the Supreme Court judgments in individual cases, thus causing an approximation between the control abstract and concrete constitutional. Saw themselves so that the Supreme Court, to be the guardian of the Constitution, its action should be directed to the trial of issues of public interest. In this new reality, it becomes more necessary the participation of the Senate to the law declared unconstitutional in fuzzy control by the Supreme Court can reach everyone, because such an interpretation has become obsolete. So, to adapt it to this reality, such a rule must be read in the sense that the Senate give publicity to the law declared unconstitutional by the Supreme Court, since mutated constitutional

O concreto e o simbólico no cotidiano da educação em saúde: práticas, representações e processo identitário dos agentes comunitários de saúde de João Pessoa PB

The present study is about an etnographic research based on the Theory of Social Representation and its complementary approach, the Theory of Central Core based on the bourdiesianos concepts of field and habitus , concerning that these concepts, articulated to the constructed social representation, may contribute to the study of social identities. Its aim is to acknowledge which identity references community health agents (CHA), agents from Community Health Agent Program (CHAP) and Family Health Program (FHP) from João Pessoa PB and which social representation is constructed by them towards health education. The study had the participation of 119 CHAs, from which 90,3 % were female and 9,7% were male. Since the identity is also built by the representation of others towards the group, 63 professionals of the FHP group (16 nurses, 16 nursing assistents, 12 doctors, 9 dentists, 6 dentistry office assistents, 4 coordinators, 1 psicologist and 1 receptionist) and 1 nurse from CHAP took part of the study, oficial documents from the Health Ministry were analyzed, verbal information from its representatives were also taken into consideration, as well as reports from the many benefitiaries of the CHA, CHAP and FHP. For data collecting, we used the combination of (a) Direct Observation and Participant Observation of the functioning micro-areas of the CHA at the Family Health Units, and the Union of the Agents; (b) Free-Association of words and expressions to stimulate the CHA , Health Education and Health ; (c) Questionnaire; (d) Interviews. The interviews were submitted to a thematic analysis of its topic. The free-association was analyzed taking in consideration the vèrgesiana proposal (a combination of the frequency and average order of evocation) which treatment enabled the identification of the central and peripheral systems of social representation towards health education and the community health agent. A test of central refutation, associated to the analysis of the indicated evocations as the most important, provided empirical evidence of social representation towards health education as orientation , prevention and hygiene , as well as the identity of CHA as supervisor , friend , help , important , and the link between the community and the Family Health Staff. Other professionals from CHAP, FHP and the Health Ministry share all of these representational contents, especially the concepts of friend and link , also shared by the community. A habitus towards the community health agents was identified, as a representation based on trust and friendship, which gives the professional a great importance towards the daily inconsistencies faced by the community

Um estudo sobre a apreciação do raciocínio matemático na formação inicial de professores

The present work focused on developing teaching activities that would provide to the student in initial teacher training, improving the ability of mathematical reasoning and hence a greater appreciation of the concepts related to the golden section, the irrational numbers, and the incommensurability the demonstration from the reduction to the nonsensical. This survey is classified itself as a field one which data collection were inserted within a quantitative and qualitative approach. Acted in this research, two classes in initial teacher training. These were teachers and employees of public schools and local governments, living in the capital, in Natal Metropolitan Region - and within the country. The empirical part of the research took place in Pedagogy and Mathematics courses, IFESP in Natal - RN. The theoretical and methodological way construction aimed to present a teaching situation, based on history, involving mathematics and architecture, derived from a concrete context - Andrea Palladio s Villa Emo. Focused discussions on current studies of Rachel Fletcher stating that the architect used the golden section in this village construction. As a result, it was observed that the proposal to conduct a study on the mathematical reasoning assessment provided, in teaching and activity sequences, several theoretical and practical reflections. These applications, together with four sessions of study in the classroom, turned on to a mathematical thinking organization capable to develop in academic students, the investigative and logical reasoning and mathematical proof. By bringing ancient Greece and Andrea Palladio s aspects of the mathematics, in teaching activities for teachers and future teachers of basic education, it was promoted on them, an improvement in mathematical reasoning ability. Therefore, this work came from concerns as opportunity to the surveyed students, thinking mathematically. In fact, one of the most famous irrational, the golden section, was defined by a certain geometric construction, which is reflected by the Greek phrase (the name "golden section" becomes quite later) used to describe the same: division of a segment - on average and extreme right. Later, the golden section was once considered a standard of beauty in the arts. This is reflected in how to treat the statement questioning by current Palladio s scholars, regarding the use of the golden section in their architectural designs, in our case, in Villa Emo