Hopping conduction and persistent photoconductivity in Cu2ZnSnS4 thin films

The temperature dependence of electrical conductivity and the photoconductivity of polycrystalline Cu2ZnSnS4 were investigated. It was found that at high temperatures the electrical conductivity was dominated by band conduction and nearest-neighbour hopping. However, at lower temperatures, both Mott variable-range hopping (VRH) and Efros–Shklovskii VRH were observed. The analysis of electrical transport showed high doping levels and a large compensation ratio, demonstrating large degree of disorder in Cu2ZnSnS4. Photoconductivity studies showed the presence of a persistent photoconductivity effect with decay time increasing with temperature, due to the presence of random local potential fluctuations in the Cu2ZnSnS4 thin film. These random local potential fluctuations cannot be attributed to grain boundaries but to the large disorder in Cu2ZnSnS4.

Le Crétacé inférieur de la marge atlantique portugaise: biostratigraphie, organization séquentielle, evolution paléogéographique

This paper gives a short description of main stratigraphic unities from the early Cretaceous in Estremadura and Algarve, with their lithological, sedimentological and paleontological characteristics. The distribution of facies enable to propose a paleogeographic frame including eroded high areas and sedimentary low areas roughly parallel to the present coast. The early Cretaceous from Estremadura is splited up into three megasequences each one with regressive then transgressive tendencies: this fact must be connected with the leading action of distensive, slow or sudden, movements. Beyond the hercynian fault of Messejana, Algarve presents a different sedimentary evolution during the early Cretaceous.

BITalino: a novel hardware framework for physiological computing

Physical computing has spun a true global revolution in the way in which the digital interfaces with the real world. From bicycle jackets with turn signal lights to twitter-controlled christmas trees, the Do-it-Yourself (DiY) hardware movement has been driving endless innovations and stimulating an age of creative engineering. This ongoing (r)evolution has been led by popular electronics platforms such as the Arduino, the Lilypad, or the Raspberry Pi, however, these are not designed taking into account the specific requirements of biosignal acquisition. To date, the physiological computing community has been severely lacking a parallel to that found in the DiY electronics realm, especially in what concerns suitable hardware frameworks. In this paper, we build on previous work developed within our group, focusing on an all-in-one, low-cost, and modular biosignal acquisition hardware platform, that makes it quicker and easier to build biomedical devices. We describe the main design considerations, experimental evaluation and circuit characterization results, together with the results from a usability study performed with volunteers from multiple target user groups, namely health sciences and electrical, biomedical, and computer engineering. Copyright © 2014 SCITEPRESS - Science and Technology Publications. All rights reserved.

Modular high-current generator for electromagnetic forming with energy recovery

A 10 kJ electromagnetic forming (EMF) modulator with energy recovery based on two resonant power modules, each containing a 4.5 kV/30-kA silicon controlled rectifier, a 1.11-mF capacitor bank and an energy recovery circuit, working in parallel to allow a maximum actuator discharge current amplitude and rate of 50 kA and 2 kA/mu s was successfully developed and tested. It can be plugged in standard single phase 230 V/16 A mains socket and the circuit is able to recover up to 32% of its initial energy, reducing the charging time of conventional EMF systems by up to 68%.

Multilevel high-voltage pulse generation based on a new modular solid-state switch

This paper describes a modular solid-state switching cell derived from the Marx generator concept to be used in topologies for generating multilevel unipolar and bipolar high-voltage (HV) pulses into resistive loads. The switching modular cell comprises two ON/OFF semiconductors, a diode, and a capacitor. This cell can be stacked, being the capacitors charged in series and their voltages balanced in parallel. To balance each capacitor voltage without needing any parameter measurement, a vector decision diode algorithm is used in each cell to drive the two switches. Simulation and experimental results, for generating multilevel unipolar and bipolar HV pulses into resistive loads are presented.

Internal structure of the nanogratings generated inside bulk fused sílica by ultrafast laser direct writing

The aim of the present work was to characterize the internal structure of nanogratings generated inside bulk fused silica by ultrafast laser processing and to study the influence of diluted hydrofluoric acid etching on their structure. The nanogratings were inscribed at a depth of 100 mu m within fused silica wafers by a direct writing method, using 1030 nm radiation wavelength and the following processing parameters: E = 5 mu J, tau = 560 fs, f = 10 kHz, and v = 100 mu m/s. The results achieved show that the laser-affected regions are elongated ellipsoids with a typical major diameter of about 30 mu m and a minor diameter of about 6 mu m. The nanogratings within these regions are composed of alternating nanoplanes of damaged and undamaged material, with an average periodicity of 351 +/- 21 nm. The damaged nanoplanes contain nanopores randomly dispersed in a material containing a large density of defects. These nanopores present a roughly bimodal size distribution with average dimensions for each class of pores 65 +/- 20 x 16 +/- 8 x 69 +/- 16 nm(3) and 367 +/- 239 x 16 +/- 8 x 360 +/- 194 nm(3), respectively. The number and size of the nanopores increases drastically when an hydrofluoric acid treatment is performed, leading to the coalescence of these voids into large planar discontinuities parallel to the nanoplanes. The preferential etching of the damaged material by the hydrofluoric acid solution, which is responsible for the pores growth and coalescence, confirms its high defect density. (C) 2014 AIP Publishing LLC.

Surface morphology and phase transformations of femtosecond laser-processed saphire

The morphological and structural modifications induced in sapphire by surface treatment with femtosecond laser radiation were studied. Single-crystal sapphire wafers cut parallel to the (0 1 2) planes were treated with 560 fs, 1030 nm wavelength laser radiation using wide ranges of pulse energy and repetition rate. Self-ordered periodic structures with an average spatial periodicity of similar to 300 nm were observed for fluences slightly higher than the ablation threshold. For higher fluences the interaction was more disruptive and extensive fracture, exfoliation, and ejection of ablation debris occurred. Four types of particles were found in the ablation debris: (a) spherical nanoparticles about 50 nm in diameter; (b) composite particles between 150 and 400 nm in size; (c) rounded resolidified particles about 100-500 nm in size; and (d) angular particles presenting a lamellar structure and deformation twins. The study of those particles by selected area electron diffraction showed that the spherical nanoparticles and the composite particles are amorphous, while the resolidified droplets and the angular particles, present a crystalline a-alumina structure, the same of the original material. Taking into consideration the existing ablation theories, it is proposed that the spherical nanoparticles are directly emitted from the surface in the ablation plume, while resolidified droplets are emitted as a result of the ablation process, in the liquid phase, in the low intensity regime, and by exfoliation, in the high intensity regime. Nanoparticle clusters are formed by nanoparticle coalescence in the cooling ablation plume. (C) 2013 Elsevier B.V. All rights reserved.

The 1998 Faial earthquake, Azores: Evidence for a transform fault associated with the Nubia-Eurasia plate boundary?

With very few exceptions, M > 4 tectonic earthquakes in the Azores show normal fault solution and occur away from the islands. Exceptionally, the 1998 shock was pure strike-slip and occurred within the northern edge of the Pico-Faial Ridge. Fault plane solutions show two possible planes of rupture striking ENE-WSW (dextral) and NNW-SSE (sinistral). The former has not been recognised in the Azores, but is parallel to the transform direction related to the relative motion between the Eurasia and Nubia plates. Therefore, the main question we address in the present study is: do transform faults related to the Eurasia/Nubia plate boundary exist in the Azores? Knowing that the main source of strain is related to plate kinematics, we conclude that the sinistral strike-slip NNW-SSE fault plane solution is not consistent with either the fault dip (ca. 65, which is typical of a normal fault) or the ca. ENE-WSW direction of maximum extension; both are consistent with a normal fault, as observed in most major earthquakes on faults striking around NNW-SSE in the Azores. In contrast, the dextral strike-slip ENE-WSW fault plane solution is consistent with the transform direction related to the anticlockwise rotation of Nubia relative to Eurasia. Altogether, tectonic data, measured ground motion, observed destruction, and modelling are consistent with a dextral strike-slip source fault striking ENE-WSW. Furthermore, the bulk clockwise rotation measured by GPS is typical of bookshelf block rotations observed at the termination of such master strike-slip faults. Therefore, we suggest that the 1998 earthquake can be related to the WSW termination of a transform (ENE-WSW fault plane solution) associated with the Nubia-Eurasia diffuse plate boundary. (C) 2014 Elsevier B.V. All rights reserved.

Preliminary study on the production of functionally graded materials by friction stir processing

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Mecânica

Ambient noise tomography of the East African Rift in Mozambique

Seismic ambient noise tomography is applied to central and southern Mozambique, located in the tip of the East African Rift (EAR). The deployment of MOZART seismic network, with a total of 30 broad-band stations continuously recording for 26 months, allowed us to carry out the first tomographic study of the crust under this region, which until now remained largely unexplored at this scale. From cross-correlations extracted from coherent noise we obtained Rayleigh wave group velocity dispersion curves for the period range 5–40 s. These dispersion relations were inverted to produce group velocity maps, and 1-D shear wave velocity profiles at selected points. High group velocities are observed at all periods on the eastern edge of the Kaapvaal and Zimbabwe cratons, in agreement with the findings of previous studies. Further east, a pronounced slow anomaly is observed in central and southern Mozambique, where the rifting between southern Africa and Antarctica created a passive margin in the Mesozoic, and further rifting is currently happening as a result of the southward propagation of the EAR. In this study, we also addressed the question concerning the nature of the crust (continental versus oceanic) in the Mozambique Coastal Plains (MCP), still in debate. Our data do not support previous suggestions that the MCP are floored by oceanic crust since a shallow Moho could not be detected, and we discuss an alternative explanation for its ocean-like magnetic signature. Our velocity maps suggest that the crystalline basement of the Zimbabwe craton may extend further east well into Mozambique underneath the sediment cover, contrary to what is usually assumed, while further south the Kaapval craton passes into slow rifted crust at the Lebombo monocline as expected. The sharp passage from fast crust to slow crust on the northern part of the study area coincides with the seismically active NNE-SSW Urema rift, while further south the Mazenga graben adopts an N-S direction parallel to the eastern limit of the Kaapvaal craton. We conclude that these two extensional structures herald the southward continuation of the EAR, and infer a structural control of the transition between the two types of crust on the ongoing deformation.

Tectónica da região de Sintra

Photo-interpretation of aerial stereopairs of the Sintra region on the approx. 1/32 000 scale together with field work allowed the production of the present Tectonic Map of the Sintra region. It is now possible to separate structures which resulted from two different tectonic events: one, corresponding to the intrusion of the Late Cretaceous Sintra igneous diapir, and the other the Miocene compressive event, the most important tectonic inversion phase of the Lusitanian Basin. The former are present to the south, southeast and east of the intrusion and within the intrusion itself, affecting the peripheral granites and their contacts with the gabbro-syenite core. These structures comprehend: i) faults and conical fractures striking parallel to the massif boundary, which were intruded by dykes, ii) vertical faults and fractures of two conjugate sets, dextral NNW-SSE and sinistral NNE-SSW. These faults are certainly associated with the E-W striking massif's northwards directed thrust and indicate a N-S oriented horizontal maximum compressive stress. The Miocene compressive event reactivated most of the inherited structures as follows. The NNWSSE faults located on the Sintra southern platform were reactivated as dextral strike slip faults and the E-W thrust along the northern boundary of the massif was also reactivated. This thrust propagated to the east. It also enhanced the asymmetry of the rim-syncline, uplifted the massif and reactivated the NNE-SSW faults as sinistral lateral ramps, which also accommodated vertical throw. The present Tectonic Map of Sintra together with the available geophysical data (MOREIRA, 1984, KULLBERG et al., 1991, SILVA & MIRANDA, 1994) allowed reassessment of the models proposed for the emplacement of the Sintra, Sines and Monchique igneous massifs, which intruded during Late Cretaceous times along the deep dextral NNW-SSE oriented strike slip fault (RIBEIRO et al., 1979; TERRINHA, 1998; TERRINHA & KULLBERG, 1998).

Transporte internacional rodoviário de mercadorias: projecto de optimização operacional

No âmbito do estágio curricular realizado na DSV Transitários, surgiu a oportunidade de estar inserida em duas das áreas funcionais da empresa: durante o primeiro mês, no departamento comercial e nos restantes meses no departamento ROAD (rodoviário Internacional) no qual me foi proporcionado a oportunidade de desempenhar funções de Operacional de Tráfego Rodoviário Internacional. Desta forma, surge o desafio de integrar na equipa de operacionais ROAD da DSV, por forma a contribuir ativamente para a rotina da empresa e paralelamente analisar os processos operacionais do departamento, bem como, identificar todos os pontos que necessitem de melhoria. Após estar inserida neste sector, compreendi que a grupagem de mercadorias desempenha um papel fundamental neste departamento, na medida em que, quando desenvolvida de uma forma eficiente, pode traduzir-se numa atividade de extremo valor. A dinâmica diária desta atividade exige que os operadores de tráfego respondam de uma forma rápida e flexível aos problemas, apresentando soluções eficazes às solicitações do mercado. Para isso, é importante encontrar mecanismos capazes de os auxiliar na tomada decisões operacionais.

The need for information literacy skills among users of European Union information

The aim of this paper is the assessment of information literacy skills related to European topics, among a group of 234 users of 55 European Documentation Centres (EDCs), from 21 European Union Member- States. We will present the results of a survey European information. So we will analyse the answers given by the users of the EDCs relating to aspects like the best sources to access trustworthy and impartial Europe information. The factors determining access to information on the EU and the frequency of this access will equally be analysed. The reasons the users gave for the ease or difficulty in accessing European information are also included and pondered on. Parallel to this, we will evaluate the aspects most valued by the users of this kind of information. Our findings on the use of European information available on the Internet, especially the knowledge and making use of databases will be presented. Based on this analysis the paper will demonstrate the need to develop information literacy competencies to identify, use and access European information. Doing so, some potential components of information literacy skills adapted to European information will be introduced.

Smart Plastic Antibody Material for Hemoglobin Tailored by Silica Surface Imprinting and with Charged Binding Sites: Its use as Ionophore in Potentiometric Transduction

JORNADAS DE ELECTROQUÍMICA E INOVAÇÃO 2013

Sistema de Controlo Remoto de Luzes de Aeródromo

Este relatório apresenta o trabalho realizado no âmbito da unidade curricular de Dissertação do Mestrado em Engenharia Electrotécnica e de Computadores – área de especialização de Automação e Sistemas. O trabalho realizado consiste no desenvolvimento de um Sistema de Controlo Remoto de Luzes de Aeródromo (SCRLA) que pode ser aplicado em paralelo aos comandos locais de controlo das luzes de aproximação, pista ou circulação, entre outras, de uma infra-estrutura aeroportuária. O objectivo fundamental deste sistema consiste em permitir ao piloto de uma aeronave o acendimento das luzes do aeródromo desde a própria aeronave, recorrendo apenas ao equipamento de rádio VHF existente a bordo da mesma e que é normalmente usado para comunicações com os serviços de controlo de tráfego aéreo. Este sistema, em aeródromos com possível operação nocturna (e.g., heliportos de hospitais), permite uma redução dos custos associados a despesas com eventual pessoal técnico ou a redução da carga de trabalho neste, e uma diminuição do consumo de energia eléctrica, uma vez que as luzes apenas são acendidas quando necessário. Este sistema permite também reduzir a poluição luminosa no ambiente e contribui positivamente para a longevidade dos equipamentos luminosos. No desenvolvimento do sistema, foram adquiridos e/ou aplicados conhecimentos nas áreas de navegação aérea, infra-estruturas aeroportuárias, telecomunicações, normalização e estandardização, electrónicas analógica e digital, programação de baixo nível em microcontroladores, desenho e construção de circuitos impressos, desenho e construção mecânica.