Influence of Indenter Tip Roundness on Hardness Behavior in Nanoindentation

In this paper. the effect of indenter tip roundness on hardness behavior for two typical elastic perfectly plastic materials is studied by means of finite element simulation. A rigid conical indenter of semi apex angle 70.3 degrees fitted smoothly with a spherical tip is employed. It is shown that as the indentation depth increases hardness first rises from zero, reaches a maximum and then decreases slowly approaching asymptotically the limiting value equal to that due to a conical indenter of ideally sharp tip. The range within which hardness varies appreciably is comparable to the radius of the indenter tip. The difference between the maximum value and the limiting value depends on the yield stress over the Young's modulus ratio. The smaller this ratio the greater the difference is. Numerical simulation also provides an opportunity for checking the accuracy and limitations of the widely used Oliver-Pharr method.

Integrated Sensor Systems for Vessels of Opportunity, National Oceanographic Centre, Southampton, UK, October 10-12,2006 : workshop proceedings

The use of self-contained, low-maintenance sensor systems installed on commercial vessels is becoming an important monitoring and scientific tool in many regions around the world. These systems integrate data from meteorological and water quality sensors with GPS data into a data stream that is automatically transferred from ship to shore. To begin linking some of this developing expertise, the Alliance for Coastal Technologies (ACT) and the European Coastal and Ocean Observing Technology (ECOOT) organized a workshop on this topic in Southampton, United Kingdom, October 10-12, 2006. The participants included technology users, technology developers, and shipping representatives. They collaborated to identify sensors currently employed on integrated systems, users of this data, limitations associated with these systems, and ways to overcome these limitations. The group also identified additional technologies that could be employed on future systems and examined whether standard architectures and data protocols for integrated systems should be established. Participants at the workshop defined 17 different parameters currently being measured by integrated systems. They identified that diverse user groups utilize information from these systems from resource management agencies, such as the Environmental Protection Agency (EPA), to local tourism groups and educational organizations. Among the limitations identified were instrument compatibility and interoperability, data quality control and quality assurance, and sensor calibration andlor maintenance frequency. Standardization of these integrated systems was viewed to be both advantageous and disadvantageous; while participants believed that standardization could be beneficial on many levels, they also felt that users may be hesitant to purchase a suite of instruments from a single manufacturer; and that a "plug and play" system including sensors from multiple manufactures may be difficult to achieve. A priority recommendation and conclusion for the general integrated sensor system community was to provide vessel operators with real-time access to relevant data (e.g., ambient temperature and salinity to increase efficiency of water treatment systems and meteorological data for increased vessel safety and operating efficiency) for broader system value. Simplified data displays are also required for education and public outreach/awareness. Other key recommendations were to encourage the use of integrated sensor packages within observing systems such as 100s and EuroGOOS, identify additional customers of sensor system data, and publish results of previous work in peer-reviewed journals to increase agency and scientific awareness and confidence in the technology. Priority recommendations and conclusions for ACT entailed highlighting the value of integrated sensor systems for vessels of opportunity through articles in the popular press, and marine science. [PDF contains 28 pages]

Complex Transition of Double-Diffusive Convection in a Rectangular Enclosure with Height-to-Length Ratio Equal to 4: Part I

This is the first part of direct numerical simulation (DNS) of double-diffusive convection in a slim rectangular enclosure with horizontal temperature and concentration gradients. We consider the case with the thermal Rayleigh number of 10^5, the Pradtle number of 1, the Lewis number of 2, the buoyancy ratio of composition to temperature being in the range of [0,1], and height-to-width aspect ration of 4. A new 7th order upwind compact scheme was developed for approximation of convective terms, and a three-stage third-order Runge-Kutta method was employed for time advancement. Our DNS suggests that with the buoyancy ratio increasing form 0 to 1, the flow of transition is a complex series changing fromthe steady to periodic, chaotic, periodic, quasi-periodic, and finally back to periodic. There are two types of periodic flow, one is simple periodic flow with single fundamental frequency (FF), and another is complex periodic flow with multiple FFs. This process is illustrated by using time-velocity histories, Fourier frequency spectrum analysis and the phase-space rajectories.

Investment opportunity in aquarium technology. Export marketing of tropical aquarium fishes

A brief account is given of the demand for ornamental fish, providing also estimates of world trade volume. The major importing countries are the USA, Japan, Germany, the UK and the Netherlands. Present supply patterns are outlined; although Nigeria has vast natural resources of tropical aquatic life and the right climate for breeding, current exports are estimated at only 5% of the total potential. Recommendations for the promotion of exports of tropical aquarium fish in Nigeria are included

Aquaculture potentials and investment opportunity in shrimps and prawns farming in Nigeria

Some aspects of the aquaculture potentials and investment opportunity in shrimps and prawn farming in Nigeria were overviewed. This paper presents the breeding pattern, spawner availability, culture water-type and properties, feeds and feeding regimes and other factors needed in practical shrimps and prawns culture. The culture systems, water management, larval management, stocking density, feeding strategies and diseases were fully discussed. The investment opportunity available as government plans to boost production of these resources from both artisanal and aquaculture sector was documented. Management strategies needed in practical practices of shrimps and prawns culture were enlisted. Effected efforts from the government were listed in this paper

Investment opportunity in improved fish smoker (IFS) as food security for artisanal women fish processors (AWOFPS) in Nigeria: a case study of Kainji Lake area

The Improved Fish Smoker (IFS) was designed and constructed by NIFFR in collaboration with GTZ in 1997. After the on-station trials, five fishing villages with pronounced fishing activities were selected for the demonstration. The IFS and the traditional Smoking Kiln were compared in one of the fishing villages using Gross Margin analysis (GM) and productivity index to determine the profitability and productivity of the two kilns. It was found that the average income of IFS users at fully capacity was N5, 555.50 per day in a year N1.3 million would be realized. Conversely, the average income of the users of Traditional Smoking Kiln (TSK) was N649.00 per day and about N152, 150.50 would be realized in a year. From this estimate, it is evident that the IFS are more profitable than the TSK. Productivity index of the two kilns also revealed that the productivity of IFS is higher than the TSK. Thus, using the IFS would enhance the income of artisanal women Fish Processors (AWOFPS) and ensure food security for the household

Autismoa literaturan

[EUS]Lan hau nik asmaturiko ipuin baten egokitzapenean oinarritzen da, eta horretarako erabili ditudan materialen ezberdinen deskribapena egiten dut. Lan hau egin dut autismoa daukaten haurrek besteak bezalakoak direlako eta eskubide berdinak dituztelako. Beraz, irakasleak jakitea zein izan behar den autismoa daukaten haurrei eman behar dien erantzun egokia garrantzitsua da, batez ere, haurren ulermena eta komunikazioa hobetzeko. Ondorioz, gainontzeko haurrekin erlazionatzeko eta autonomoagoak izateko aukera izango dute. Oso garrantzitsua da gogoratzea haur bakoitza ezberdina dela, eta edozein egokitzapena egiterako orduan, bakoitzaren ezaugarriak, beharrak eta gaitasunak hartu behar dira kontutan.

Economía de la salud, modalidades de evaluación económica

La salud es un aspecto muy importante en la vida de cualquier persona, de forma que, al ocurrir cualquier contingencia que merma el estado de salud de un individuo o grupo de personas, se debe valorar estrictamente y en detalle las distintas alternativas destinadas a combatir la enfermedad. Esto se debe a que, la calidad de vida de los pacientes variará dependiendo de la alternativa elegida. La calidad de vida relacionada con la salud (CVRS) se entiende como el valor asignado a la duración de la vida, modificado por la oportunidad social, la percepción, el estado funcional y la disminución provocadas por una enfermedad, accidente, tratamiento o política (Sacristán et al, 1995). Para determinar el valor numérico asignado a la CVRS, ante una intervención, debemos beber de la teoría económica aplicada a las evaluaciones sanitarias para nuevas intervenciones. Entre los métodos de evaluación económica sanitaria, el método coste-utilidad emplea como utilidad, los años de vida ajustado por calidad (AVAC), que consiste, por un lado, tener en cuenta la calidad de vida ante una intervención médica, y por otro lado, los años estimados a vivir tras la intervención. Para determinar la calidad de vida, se emplea técnicas como el Juego Estándar, la Equivalencia Temporal y la Escala de Categoría. Estas técnicas nos proporcionan un valor numérico entre 0 y 1, siendo 0 el peor estado y 1 el estado perfecto de salud. Al entrevistar a un paciente a cerca de la utilidad en términos de salud, puede haber riesgo o incertidumbre en la pregunta planteada. En tal caso, se aplica el Juego Estándar con el fin de determinar el valor numérico de la utilidad o calidad de vida del paciente ante un tratamiento dado. Para obtener este valor, al paciente se le plantean dos escenarios: en primer lugar, un estado de salud con probabilidad de morir y de sobrevivir, y en segundo lugar, un estado de certeza. La utilidad se determina modificando la probabilidad de morir hasta llegar a la probabilidad que muestra la indiferencia del individuo entre el estado de riesgo y el estado de certeza. De forma similar, tenemos la equivalencia temporal, cuya aplicación resulta más fácil que el juego estándar ya que valora en un eje de ordenadas y abscisas, el valor de la salud y el tiempo a cumplir en esa situación ante un tratamiento sanitario, de forma que, se llega al valor correspondiente a la calidad de vida variando el tiempo hasta que el individuo se muestre indiferente entre las dos alternativas. En último lugar, si lo que se espera del paciente es una lista de estados de salud preferidos ante un tratamiento, empleamos la Escala de Categoría, que consiste en una línea horizontal de 10 centímetros con puntuaciones desde 0 a 100. La persona entrevistada coloca la lista de estados de salud según el orden de preferencia en la escala que después es normalizado a un intervalo entre 0 y 1. Los años de vida ajustado por calidad se obtienen multiplicando el valor de la calidad de vida por los años de vida estimados que vivirá el paciente. Sin embargo, ninguno de estas metodologías mencionadas consideran el factor edad, siendo necesario la inclusión de esta variable. Además, los pacientes pueden responder de manera subjetiva, situación en la que se requiere la opinión de un experto que determine el nivel de discapacidad del aquejado. De esta forma, se introduce el concepto de años de vida ajustado por discapacidad (AVAD) tal que el parámetro de utilidad de los AVAC será el complementario del parámetro de discapacidad de los AVAD Q^i=1-D^i. A pesar de que este último incorpora parámetros de ponderación de edad que no se contemplan en los AVAC. Además, bajo la suposición Q=1-D, podemos determinar la calidad de vida del individuo antes del tratamiento. Una vez obtenido los AVAC ganados, procedemos a la valoración monetaria de éstos. Para ello, partimos de la suposición de que la intervención sanitaria permite al individuo volver a realizar las labores que venía realizando. De modo que valoramos los salarios probables con una temporalidad igual a los AVAC ganados, teniendo en cuenta la limitación que supone la aplicación de este enfoque. Finalmente, analizamos los beneficios derivados del tratamiento (masa salarial probable) si empleamos la tabla GRF-95 (población femenina) y GRM-95 (población masculina).