On the hydrogeology of the Lower Tagus Basin and its Cenozoic geologic evolution

The chemical features of the ground water in the Lower Tagus Cenozoic deposits are strongly influenced by lithology, by the velocity and direction of the water movement as well as by the localization of the recharge and discharge zones. The mineralization varies between 80 and 900 mg/l. It is minimal in the recharge zones and in the Pliocene sand and maximum in the Miocene carbonated and along the alluvial valley. Mineralization always reflects the time of permanence, the temperature and the pressure. The natural process of water mineralization is disturbed in agricultural areas because the saline concentration of the infiltration water exceeds that of the infiltrated rainwater. In the discharge zones, the rise of the more mineralized, some times thermal deep waters related to tectonic accidents give rise to anomalies in the distribution of the aquiferous system mineralization model. The diversity of the hydrochemical facies of the ground water may be related to several factors whose identification is some times difficult.

Thermodynamic and kinetic modelling of the redox properties of tetrahaem cytochromes C3

Dissertação apresentada para obtenção do grau de Doutor em Bioquímica,especialidade Bioquímica-Física, pela Universidade Nova de Lisboa, Faculdade de Cincias e Tecnologia

Fly by data link: feasibility of a relative navigation solution for aviation relying on a future L-band data link

Trabalho final de Mestrado para obtenção do grau de Mestre em Engenharia de Electrónica e Telecomunicações

Penicillin at the late stage of leptospirosis: a randomized controlled trial

There is evidence that an early start of penicillin reduces the case-fatality rate of leptospirosis and that chemoprophylaxis is efficacious in persons exposed to the sources of leptospira. The existent data, however, are inconsistent regarding the benefit of introducing penicillin at a late stage of leptospirosis. The present study was developed to assess whether the introduction of penicillin after more than four days of symptoms reduces the in-hospital case-fatality rate of leptospirosis. A total of 253 patients aged 15 to 76 years with advanced leptospirosis, i.e., more than four days of symptoms, admitted to an infectious disease hospital located in Salvador, Brazil, were selected for the study. The patients were randomized to one of two treatment groups: with intravenous penicillin, 6 million units day (one million unit every four hours) for seven days (n = 125) and without (n = 128) penicillin. The main outcome was death during hospitalization. The case-fatality rate was approximately twice as high in the group treated with penicillin (12%; 15/125) than in the comparison group (6.3%; 8/128). This difference pointed in the opposite direction of the study hypothesis, but was not statistically significant (p = 0.112). Length of hospital stay was similar between the treatment groups. According to the results of the present randomized clinical trial initiation of penicillin in patients with severe forms of leptospirosis after at least four days of symptomatic leptospirosis is not beneficial. Therefore, more attention should be directed to prevention and earlier initiation of the treatment of leptospirosis.

Bridging present and future of brain-computer interfaces: an assessment of impacts

Based on the report for the “Project III” unit of the PhD programme on Technology Assessment under the supervision of Prof. António B. Moniz. This report was discussed also at the 2nd Winter School on Technology Assessment held at Universidade Nova de Lisboa, Caparica Campus, Portugal on December 2011.

Integration of the project team in the classic maintenance cycle

A manutenção é uma área extremamente importante, principalmente na indústria. Devidamente organizada, permitirá um fluxo produtivo devidamente planeado e executado, que permitirá a qualquer empresa manter o nível de facturação desejado e o prazo de entrega acordado com os clientes. De outra forma, poderá originar o caos. No entanto, os desafios de gestão da produção mais correntes, nomeadamente através do Lean Manufacturing, passam a exigir um pouco mais do que uma simples manutenção. Torna-se obrigatório fazer análises económicas que permitam averiguar quando cada equipamento passa a exigir custos de manutenção excessivos, os quais poderão obrigar a um recondicionamento mais acentuado do equipamento, o qual pode passar inclusivamente por uma melhoria da sua performance. Nestes casos, terá que existir uma “cumplicidade” entre a Direcção de Produção e a Manutenção, no sentido de averiguar o melhor momento para proceder a uma melhoria do equipamento, numa perspectiva de funcionamento global em linha de produção, adaptando-o à performance que será exigida ao conjunto. Neste domínio, o Projecto passa a prestar um serviço valiosíssimo à empresa, integrando-se no conjunto Produção + Manutenção, criando valor na intervenção, através do desenvolvimento de um trabalho que permite não só repor o estado natural da produção, mas sim promover uma melhoria sustentada da mesma. Este trabalho pretende reflectir e avaliar a relevância do Projecto neste tipo de operações, contribuindo de uma forma sistemática e sustentada para a melhoria contínua dos processos de fabrico. É apresentado um caso de estudo que pretende validar todo o desenvolvimento anteriormente realizado na matéria.

Study on the development of an autonomous mobile robot

Dissertação para obtenção do Grau de Mestre em Engenharia Eletrotécnica e de Computadores

The influence of price changes on consumers' purchase decisions

The development of an effective pricing strategy requires the acquaintance of consumers’ price perception as well as the range of elements that influence the price sensitivity. This paper analyses the relationships between product features, individual characteristics and the level of price increase/decrease that induces the consumers to change their purchase decisions. The results of a dedicated survey show, that price sensitivity, individual preferences, type of product and direction of price change and individual characteristics of consumers (gender, age, professional situation) have a significant impact on a threshold at which people are willing to choose the less attractive, but cheaper alternative to their favorite product or give up the variety in consumption. From a consumer behavior perspective, these findings play a fundamental role in pricing.

Time-dependent flexural behaviour of cracked steel fibre reinforced self-compacting concrete panels

In the present work are described and discussed the results of an extensive experimental program that aims to study the long-term behaviour of cracked steel fibre reinforced self-compacting concrete, SFRSCC, applied in laminar structures. In a first stage, the influence of the initial crack opening level (wcr = 0.3 and 0.5 mm), applied stress level, fibre orientation/dispersion and distance from the casting point, on the flexural creep behaviour of SFRSCC was investigated. Moreover, in order to evaluate the effects of the creep phenomenon on the residual flexural strength, a series of monotonic tests were also executed. It was found that wcr = 0.5 mm series showed a higher creep coefficient comparing to the series with a lower initial crack opening. Furthermore, the creep performance of the SFRSCC was influenced by the orientation of the extracted prismatic specimens regarding the direction of the concrete flow within the cast panel.

Survey and dynamic behaviour of the Our Lady of Conception Church, Portugal

The Our Lady of Conception church is located in village of Monforte (Portugal) and is not in use nowadays. The church presents structural damage and, consequently, a study was carried out. The study involved the survey of the damage, dynamic identification tests under ambient vibration and the numerical analysis. The church is constituted by the central nave, the chancel, the sacristy and the corridor to access the pulpit. The masonry walls present different thickness, namely 0.65 m in the chancel, 0.70 m in the sacristy, 0.92 in the central nave and 0.65 m in the corridor. The masonry walls present 8 buttresses with different dimensions. The total longitudinal and transversal dimensions of the church are equal to 21.10 m and 14.26 m, respectively. The survey of the damage showed that, in general, the masonry walls are in good conditions, with exception of the transversal walls of the nave, which present severe cracks. The arches of the vault presents also severe cracks along the central nave. As consequence, the infiltrations have increased the degradation of the vault and paintings. Furthermore, the foundations present settlements in the Southwest direction. The dynamic identification test were carried out under the action of ambient excitation of the wind and using 12 piezoelectric accelerometers of high sensitivity. The dynamic identification tests allowed to estimate the dynamic properties of the church, namely frequencies, mode shapes and damping ratios. A FEM numerical model was prepared and calibrated, based on the first four experimental modes estimated in the dynamic identification tests. The average error between the experimental and numerical frequencies of the first four modes is equal to 5%. After calibration of the numerical model, pushover analyses with a load pattern proportional to the mass, in the transversal and longitudinal direction of the church, were performed. The results of the analysis numerical allow to conclude that the most vulnerable direction of the church is in the transversal one and the maximum load factor is equal to 0.35.

Centrality and rapidity dependence of inclusive jet production in sNN=5.02 TeV proton-lead collisions with the ATLAS detector

Measurements of the centrality and rapidity dependence of inclusive jet production in sNN−−−√=5.02 TeV proton--lead (p+Pb) collisions and the jet cross-section in s√=2.76 TeV proton--proton collisions are presented. These quantities are measured in datasets corresponding to an integrated luminosity of 27.8 nb−1 and 4.0 pb−1, respectively, recorded with the ATLAS detector at the Large Hadron Collider in 2013. The p+Pb collision centrality was characterised using the total transverse energy measured in the pseudorapidity interval −4.9<η<−3.2 in the direction of the lead beam. Results are presented for the double-differential per-collision yields as a function of jet rapidity and transverse momentum (pT) for minimum-bias and centrality-selected p+Pb collisions, and are compared to the jet rate from the geometric expectation. The total jet yield in minimum-bias events is slightly enhanced above the expectation in a pT-dependent manner but is consistent with the expectation within uncertainties. The ratios of jet spectra from different centrality selections show a strong modification of jet production at all pT at forward rapidities and for large pT at mid-rapidity, which manifests as a suppression of the jet yield in central events and an enhancement in peripheral events. These effects imply that the factorisation between hard and soft processes is violated at an unexpected level in proton--nucleus collisions. Furthermore, the modifications at forward rapidities are found to be a function of the total jet energy only, implying that the violations may have a simple dependence on the hard parton--parton kinematics.

Topography of aligned PNIPAm nanogels determines cell motility and cytoskeleton architecture

Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Engenharia Clínica)

Breastfeeding and postpartum depression: state of the art review

Objective: To review the literature on the association between breastfeeding and postpartum depression. Sources: A review of literature found on MEDLINE/ PubMed database. Summary of findings: The literature consistently shows that breastfeeding provides a wide range of benefits for both the child and the mother. The psychological benefits for the mother are still in need of further research. Some studies point out that pregnancy depression is one of the factors that may contribute to breastfeeding failure. Others studies also suggest an association between breastfeeding and postpartum depression; the direction of this association is still unclear. Breastfeeding can promote hormonal processes that protect mothers against postpartum depression by attenuating cortisol response to stress. It can also reduce the risk of postpartum depression, by helping the regulation of sleep and wake patterns for mother and child, improving mother’s self efficacy and her emotional involvement with the child, reducing the child’s temperamental difficulties, and promoting a better interaction between mother and child. Conclusions: Studies demonstrate that breastfeeding can protect mothers from postpartum depression, and are starting to clarify which biological and psychological processes may explain this protection. However, there are still equivocal results in the literature that may be explained by the methodological limitations presented by some studies.

Fisheries : Zoological results of the fishing experiments carried out by F.I.S. "Endeavor" 1909-10 under H.C. Dannevig, / Commonwealth Director of Fisheries.

3

Fisheries : Zoological results of the fishing experiments carried out by F.I.S. "Endeavor" 1909-10 under H.C. Dannevig, / Commonwealth Director of Fisheries.

5