Medição da densidade óssea através de ondas eletromagnéticas e classificação por MVS

This work holds the purpose of presenting an auxiliary way of bone density measurement through the attenuation of electromagnetic waves. In order to do so, an arrangement of two microstrip antennas with rectangular configuration has been used, operating in a frequency of 2,49 GHz, and fed by a microstrip line on a substrate of fiberglass with permissiveness of 4.4 and height of 0,9 cm. Simulations were done with silica, bone meal, silica and gypsum blocks samples to prove the variation on the attenuation level of different combinations. Because of their good reproduction of the human beings anomaly aspects, samples of bovine bone were used. They were subjected to weighing, measurement and microwave radiation. The samples had their masses altered after mischaracterization and the process was repeated. The obtained data were inserted in a neural network and its training was proceeded with the best results gathered by correct classification on 100% of the samples. It comes to the conclusion that through only one non-ionizing wave in the 2,49 GHz zone it is possible to evaluate the attenuation level in the bone tissue, and that with the appliance of neural network fed with obtained characteristics in the experiment it is possible to classify a sample as having low or high bone density

Projeto e Implementação em Ambiente Foundation Fieldbus de Filtragem Estocástica Baseada em Análise de Componentes Independentes (M175)

This work considers the development of a filtering system composed of an intelligent algorithm, that separates information and noise coming from sensors interconnected by Foundation Fieldbus (FF) network. The algorithm implementation will be made through FF standard function blocks, with on-line training through OPC (OLE for Process Control), and embedded technology in a DSP (Digital Signal Processor) that interacts with the fieldbus devices. The technique ICA (Independent Component Analysis), that explores the possibility of separating mixed signals based on the fact that they are statistically independent, was chosen to this Blind Source Separation (BSS) process. The algorithm and its implementations will be Presented, as well as the results

Eletrofiação e caracterização de membranas biopoliméricas a base de quitosana extraídas dos exoesqueletos de crustáceos

Chitin and chitosan are nontoxic, biodegradable and biocompatible polymers produced by renewable natural sources with applications in diverse areas such as: agriculture, textile, pharmaceutical, cosmetics and biomaterials, such as gels, films and other polymeric membranes. Both have attracted greater interest of scientists and researchers as functional polymeric materials. In this context, the objective of this study was to take advantage of the waste of shrimp (Litopenaeus vannamei and Aristeus antennatus) and crabs (Ucides cordatus) from fairs, beach huts and restaurant in Natal/RN for the extraction of chitin and chitosan for the production of membranes by electrospinning process. The extraction was made through demineralization, deproteinization, deodorization and deacetylation. Morphological analyzes (SEM and XRD), Thermal analysis (TG and DTG), Spectroscopy in the Region of the Infrared with Transformed of Fourier (FTIR) analysis Calorimetry Differential Scanning (DSC) and mechanical tests for traction were performed. In (XRD) the semicrystalline structure of chitosan can be verified while the chitin had higher crystallinity. In the thermal analysis showed a dehydration process followed by decomposition, with similar behavior of carbonized material. Chitosan showed temperature of maximum degradation lower than chitin. In the analysis by Differential Scanning Calorimetry (DSC) the curves were coherent to the thermal events of the chitosan membranes. The results obtained with (DD) for chitosan extracted from Litopenaeus vannamei and Aristeus antennatus shrimp were (80.36 and 71.00%) and Ucides cordatus crabs was 74.65%. It can be observed that, with 70:30 solutions (v/v) (TFA/DCM), 60 and 90% CH3COOH, occurred better facilitate the formation of membranes, while 100:00 (v/v) (TFA/DCM) had formation of agglomerates. In relation to the monofilaments diameters of the chitosan membranes, it was noted that the capillary-collector distance of 10 cm and tensions of 25 and 30 kV contributed to the reduction of the diameters of membranes. It was found that the Young s modulus decreases with increasing concentration of chitosan in the membranes. 90% CH3COOH contributed to the increase in the deformation resulting in more flexible material. The membranes with 5% chitosan 70:30 (v/v) (TFA/DCM) had higher tensile strength

Simulação computacional do escoamento em bombas de cavidades progressivas

The use of Progressing Cavity Pumps (PCPs) in artificial lift applications in low deep wells is becoming more common in the oil industry, mainly, due to its ability to pump heavy oils, produce oil with large concentrations of sand, besides present high efficiency when compared to other artificial lift methods. Although this system has been widely used as an oil lift method, few investigations about its hydrodynamic behavior are presented, either experimental or numeric. Therefore, in order to increase the knowledge about the BCP operational behavior, this work presents a novel computational model for the 3-D transient flow in progressing cavity pumps, which includes the relative motion between rotor and stator, using an element based finite volume method. The model developed is able to accurately predict the volumetric efficiency and viscous looses as well as to provide detailed information of pressure and velocity fields inside the pump. In order to predict PCP performance for low viscosity fluids, advanced turbulence models were used to treat, accurately, the turbulent effects on the flow, which allowed for obtaining results consistent with experimental values encountered in literature. In addition to the 3D computational model, a simplified model was developed, based on mass balance within cavities and on simplification on the momentum equations for fully developed flow along the seal region between cavities. This simplified model, based on previous approaches encountered in literature, has the ability to predict flow rate for a given differential pressure, presenting exactness and low CPU requirements, becoming an engineering tool for quick calculations and providing adequate results, almost real-time time. The results presented in this work consider a rigid stator PCP and the models developed were validated against experimental results from open literature. The results for the 3-D model showed to be sensitive to the mesh size, such that a numerical mesh refinement study is also presented. Regarding to the simplified model, some improvements were introduced in the calculation of the friction factor, allowing the application fo the model for low viscosity fluids, which was unsuccessful in models using similar approaches, presented in previous works

Avaliação dos impactos ambientais gerados por uma industria cerâmica típica da Região do Seridó/RN

The present work deals with an evaluation of the environmental impacts arised from a typical ceramics industry located in the Seridó region of Rio Grande do Norte State. That region contains the largest State s producing basin of red ceramics. The district of Parelhas stands out as the largest producing nucleus. The studied company is located in the rural zone of Parelhas, it was selected as study object because it possesses a great part of the representative characteristics of the Region s ceramics park as a whole. Impacts produced at the implantation and operation phases of the Company had been evaluated, being this last phase subdivided in stages of the productive process. Among found adverse impacts, they are distinguished: losses in air quality, undesirable noises, microclimatic alterations, impoverishment of the ground, elimination of the vegetal covering, agricultural exodus, crisis in cattle agriculture and, superficial and underground water contamination, beyond risks ocupational diseases and industrial accidents. The Leopold s interactive matrix, that summarizes results of the work, was presented in form of 15 (fifteen) tables that display impacts classified in qualitative and quantitative way. Totally, 175 (one hundred and seventy-five) significant impacts produced by this Company had been identified, being 114 (one hundred and fourteen) negative, 38 (thirty-eight) positive and 23 (twenty-three) among mixed, indefinite and inert ones. In the work, before the evaluation of impacts properly said, it was constructed a diagnostic table of the ambient situation at a previous moment to implantation of the Company, elaborated on basis of inferences and historical researches. It was proposed still, mitigative steps for adverse impacts identified, as also elaborated a program to accompaniment and observing that the fulfilment of indicated mitigative steps guarantees. The final part of the work contemplates conclusions and suggestions that aim to influence positively the presented sight in terms of environmental management

Modelagem e simulação da deposição de parafinas em escoamento turbulento

The flow assurance has become one of the topics of greatest interest in the oil industry, mainly due to production and transportation of oil in regions with extreme temperature and pressure. In these operations the wax deposition is a commonly problem in flow of paraffinic oils, causing the rising costs of the process, due to increased energy cost of pumping, decreased production, increased pressure on the line and risk of blockage of the pipeline. In order to describe the behavior of the wax deposition phenomena in turbulent flow of paraffinic oils, under different operations conditions, in this work we developed a simulator with easy interface. For that we divided de work in four steps: (i) properties estimation (physical, thermals, of transport and thermodynamics) of n-alkanes and paraffinic mixtures by using correlations; (ii) obtainment of the solubility curve and determination the wax appearance temperature, by calculating the solid-liquid equilibrium of parafinnic systems; (iii) modelling wax deposition process, comprising momentum, mass and heat transfer; (iv) development of graphic interface in MATLAB® environment for to allow the understanding of simulation in different flow conditions as well as understand the matter of the variables (inlet temperature, external temperature, wax appearance temperature, oil composition, and time) on the behavior of the deposition process. The results showed that the simulator developed, called DepoSim, is able to calculate the profile of temperature, thickness of the deposit, and the amount of wax deposited in a simple and fast way, and also with consistent results and applicable to the operation

Monitoramento em tempo real de processos fermentativos por espectroscopia no infravermelho próximo (NIRS)

A chemical process optimization and control is strongly correlated with the quantity of information can be obtained from the system. In biotechnological processes, where the transforming agent is a cell, many variables can interfere in the process, leading to changes in the microorganism metabolism and affecting the quantity and quality of final product. Therefore, the continuously monitoring of the variables that interfere in the bioprocess, is crucial to be able to act on certain variables of the system, keeping it under desirable operational conditions and control. In general, during a fermentation process, the analysis of important parameters such as substrate, product and cells concentration, is done off-line, requiring sampling, pretreatment and analytical procedures. Therefore, this steps require a significant run time and the use of high purity chemical reagents to be done. In order to implement a real time monitoring system for a benchtop bioreactor, these study was conducted in two steps: (i) The development of a software that presents a communication interface between bioreactor and computer based on data acquisition and process variables data recording, that are pH, temperature, dissolved oxygen, level, foam level, agitation frequency and the input setpoints of the operational parameters of the bioreactor control unit; (ii) The development of an analytical method using near-infrared spectroscopy (NIRS) in order to enable substrate, products and cells concentration monitoring during a fermentation process for ethanol production using the yeast Saccharomyces cerevisiae. Three fermentation runs were conducted (F1, F2 and F3) that were monitored by NIRS and subsequent sampling for analytical characterization. The data obtained were used for calibration and validation, where pre-treatments combined or not with smoothing filters were applied to spectrum data. The most satisfactory results were obtained when the calibration models were constructed from real samples of culture medium removed from the fermentation assays F1, F2 and F3, showing that the analytical method based on NIRS can be used as a fast and effective method to quantify cells, substrate and products concentration what enables the implementation of insitu real time monitoring of fermentation processes

Estudo dos parâmetros de extração de fenol de efluentes aquosos por um tensoativo não iônico

Environmental sustainability has become one of the topics of greatest interest in industry, mainly due to effluent generation. Phenols are found in many industries effluents, these industries might be refineries, coal processing, pharmaceutical, plastics, paints and paper and pulp industries. Because phenolic compounds are toxic to humans and aquatic organisms, Federal Resolution CONAMA No. 430 of 13.05.2011 limits the maximum content of phenols, in 0.5 mg.L-1, for release in freshwater bodies. In the effluents treatment, the liquid-liquid extraction process is the most economical for the phenol recovery, because consumes little energy, but in most cases implements an organic solvent, and the use of it can cause some environmental problems due to the high toxicity of this compound. Because of this, exists a need for new methodologies, which aims to replace these solvents for biodegradable ones. Some literature studies demonstrate the feasibility of phenolic compounds removing from aqueous effluents, by biodegradable solvents. In this extraction kind called "Cloud Point Extraction" is used a nonionic surfactant as extracting agent of phenolic compounds. In order to optimize the phenol extraction process, this paper studies the mathematical modeling and optimization of extraction parameters and investigates the effect of the independent variables in the process. A 32 full factorial design has been done with operating temperature and surfactant concentration as independent variables and, parameters extraction: Volumetric fraction of coacervate phase, surfactant and residual concentration of phenol in dilute phase after separation phase and phenol extraction efficiency, as dependent variables. To achieve the objectives presented before, the work was carried out in five steps: (i) selection of some literature data, (ii) use of Box-Behnken model to find out mathematical models that describes the process of phenol extraction, (iii) Data analysis were performed using STATISTICA 7.0 and the analysis of variance was used to assess the model significance and prediction (iv) models optimization using the response surface method (v) Mathematical models validation using additional measures, from samples different from the ones used to construct the model. The results showed that the mathematical models found are able to calculate the effect of the surfactant concentration and the operating temperature in each extraction parameter studied, respecting the boundaries used. The models optimization allowed the achievement of consistent and applicable results in a simple and quick way leading to high efficiency in process operation.

Relações radiométricas no terço superior da copa de cafeeiro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A gestão da qualidade nos cursos de graduação a distância da UFRN/SEDIS : a percepção dos discentes

The management of water resources in the river basin level, as it defines the Law nº 9433/97, requires the effective knowledge of the processes of hydrological basin, resulting from studies based on consistent series of hydrological data that reflect the characteristics of the basin. In this context, the objective of this work was to develop the modeling of catchment basin of the river Jundiaí - RN and carry out the study of attenuation of a flood of the dam Tabatinga, by means of a monitoring project of hydrological data and climatology of the basin, with a view to promoting the development of research activities by applying methodologies unified and appropriate for the assessment of hydrological studies in the transition region of the semiarid and the forest zone on the coast of Rio Grande do Norte. For the study of the hydrological characteristics of the basin was conducted the automatic design of the basin of the river Jundiaí, with the aid of programs of geoprocessing, was adopted a hydrological model daily, the NRCS, which is a model determined and concentrated. For the use of this model was necessary to determine some parameters that are used in this model, as the Curve Number. Having in mind that this is the first study that is being conducted in the basin with the employment of this model, it was made sensitivity analysis of the results of this model from the adoption of different values of CN, situated within a range appropriate to the conditions of use, occupation and the nature of the soil of this basin. As the objective of this study was also developing a simulation model of the operation of the Tabatinga dam and with this flood control caused in the city of Macaíba, it was developed a mathematical model of fluid balance, developed to be used in Microsoft Excel. The simulation was conducted in two phases: the first step was promoted the water balance daily that allowed the analysis of the sensitivity of the model in relation to the volume of waiting, as well as the determination of the period of greatest discharges daily averages. From this point, it was assumed for the second stage, which was in the determination of the hydrograph of discharges effluent slots, that was determined by means of the fluid balance time, on the basis of the discharges effluents generated by a mathematical equation whose parameters were adjusted according to the hydrograph daily. Through the analyzes it was realized that the dam Tabatinga only has how to carry out the attenuation of floods through the regularization of the volume of waiting, with this there is a loss of approximately 56.5% on storage capacity of this dam, because for causing the attenuation effect of filled the shell of this dam has to remain more than 5m below the level of the sill, representing at least 50.582.927m3. The results obtained with the modeling represents a first step in the direction of improving the level of hydrological information about the behavior of the basins of the semiarid. In order to monitor quantitatively the hydrographic basin of the river Jundiaí will be necessary to install a rain gauge register, next to the Tabatinga dam and a pressure transducer, for regular measurements of flow in the reservoir of the dam. The climatological data will be collected in full automatic weather station installed in Agricultural School Jundiaí

A leitura e o leitor presumido nas avaliações oficiais

Este estudio se refiere a una investigación a cerca de la concepción de la lectura que subyace en la Matriz de Referencia de la Prueba Brasil, y, mediante las análisis del modelo 2009, entender lo que el lector se supone que responder en las preguntas de esta prueba. El estudio tiene como objetivo satisfacer se presume lector general para responder a las preguntas de prueba de Brasil y el mapa de la concepción de la lectura que subyace en la matriz de referencia tal prueba. Los objetivos específicos apuntan a examinar los temas de Prueba Brasil, identificando qué descriptores se materializan en el mismo, que son los más recurrentes. El estudio tiene como fundamentos los estudios bakhtinianos a cerca de los diálogos del linguaje (Bakhtin, 2003, 2008; Volochínov/Bakhtin, 1993) y la concepción de la lectura defendida por Geraldi (2007), Larossa (2001) y DeCerteau (1994). La investigación és caracterizada como cualitativo-interpretativo, con enfoque socio-histórico, y se encuentra dentro del campo de la Lingüística Aplicada, que en las últimas décadas ha demostrado contribuciones para la enseñanza de lenguas y formación docente. Para hacer el análisis de las pruebas, inicialmente construido una tabla (Tabla 1), que contiene los seis macrotópicos Matrix lengua portuguesa en la que estábamos repartiendo los descriptores presentes en las cuestiones de prueba referenciada relacionándolos con sus temas. Tras analizar la cuestión, con el fin de identificar al presunto lector a responder a estas preguntas. Mediante análisis de la Matriz de Referencia de la Prueba Brasil, entendemos que ella está de acuerdo con los Parámetros Curriculares de la Lengua Portuguesa. Así, la concepción que subyace en la lectura es que la lectura es una actividad que depende del proceso individual, pero que és parte de un contexto social e involucra a habilidades relacionadas con la comprensión y producción de sentido. Mediante la observación de la prueba, afirmamos qué el lector con la capacidad de responder a las preguntas es lo que desarrolla actitudes favorables a cerda de la lectura. A saber: (i) reconocen ampliamente las palabras, (ii) identifican los objetivos y funciones de la lectura, en reconocimiento de la función de apoyo de género y el contexto del texto, (iii) predice el contenido de los textos a se lee a la luz de su apoyo, su género y su contexto; (iv) plantea hipótesis sobre el contenido del texto que se lee, (v) es capaz de buscar ideas textual e intertextual. Es decir, hace inferencias, aumentando la comprensión, la asociación de diversos elementos presentes en el texto y que son parte de sus propias experiências personales, (vi) construye la comprensión global del texto leído por la unificación de la información explícita e implícita, (vii) tiene la capacidad de evaluar la lectura de forma ética y afectiva, o de hacer extrapolaciones coerentes sin escapar de la temática del texto. Por último, podemos decir que las implicaciones pedagógicas de este trabajo para mi actividad profesional es de gran importancia, ya que desde la detección de lo que se requiere de los estudiantes y, en consecuencia, un nuevo enfoque para la enseñanza de la lengua materna como podemos reflexionar sobre eso y encontrar maneras de mejorar nuestro desempeño. Tanto nuestro entrenador como nuestros compañeros. Dejando a un nivel puramente descriptivo de los problemas de acción conjunta más eficaz, entendiendo que la enseñanza de lectura tiene un carácter complejo. En este sentido, tenemos que ser menos intuitivo y más reflexiva. Nos gustaría hacer hincapié en que tenemos la intención de socializar esta investigación con nuestros compañeros, ya que entendemos que es un material que puede contribuir a un nuevo aprendizaje para la práctica de los profesores que se inclinan. Además indicó que la principal contribución de este trabajo es nuestra mirada en el proceso de la lectura en el aula, la comprensión de que el estudiante de ofertas diarias con textos localizados, derechos de autor, histórico y representativo de las diferentes interacciones en el mundo. Por lo tanto, es el momento de ser gestado las prácticas de lectura hacia una educación más significativa

O jogo das identidades como fator de mobilização político-eleitoral nas campanhas de Dilma Rousseff e Rosalba Ciarlini em 2010

Starting from the premise that we live in the society of spectacle, as proclaimed by Guy Debbord, and, in this context, the media feeds itself off of this spectacularization and constructs a culture of images and production of goods, providing templates from which the subject can identify himself/herself as being male or female, successful or unsuccessful, powerful or powerless. In other words, the culture conveyed by the media produces material for the creation of identities through which individuals insert and recognize themselves in contemporary society. Observing the election campaigns, we can see clearly that this profusion of identities is fairly explored in the advertising propaganda used by the candidates, particularly in the propaganda broadcasted on the Free Electoral Time on TV. Instigated by the explicit relation between the media and politics within the society of the spectacle, this study aims to investigate the main identities that emerge in the discursive practices of the media in the election campaigns of 2010 for president of the Republic and governor of the State of Rio Grande do Norte that had as protagonists the candidates at that moment Dilma Rousseff (PT) for president and Rosalba Ciarline (DEM) for governor. To do so, we based ourselves on the theory of Bakhtin Circle, which considers the statement as a unit of verbal communication and conceives language as a dialogical phenomena and a discursive practice and also in the conceptions of dialogical relationships, social voices and chronotope formulated by the previous mentioned theory. Still in the theoretical field, we have established an interconnection with the theories coming from the Cultural Studies (Hall, Woodward) about the identity, which conceives it as multiple, fragmented, non-fixed, so that, the subject assumes different identities, not always coherent, at different times, depending on the context in which they are approached. The research is situated in the frames of Applied Linguistics, which considers language as the center of its studies and settles on the border of an open number of areas of knowledge expanding its possibilities of investigation by means of the interdisciplinary. Our corpus consists in 20 electoral propaganda videos aired on TV during the Free Election Time in 2010 campaign; among these, 14 videos are Dilma Rousseff s propaganda and 06 videos are Rosalba Ciarline s propaganda. We seek for the purpose of the analysis to identify the identities which emerge from the discourses about the candidates in propaganda videos broadcasted in the referred campaign, as well as realize the dialogical relations established in these discourses and even if the identity construction of these subjects is located in the same axiological axis. The corpus analysis revealed that the multiple cultural identities of the candidates campaigning emerge in the discourses circulating in the electoral propaganda aired on TV such as: the identities of pioneer woman, competent, sensitive, mother, grandmother, religious. And, yet, those are changeable as the electoral demands, in other words, the need to obtain support and votes, outline a fluid identity construction about the candidate to the position in question

Representações espectrais de sistemas complexos: aplicações à síntese de superfícies brownianas fracionárias anisotrópicas, filtragem de sinais e identificação de correlações

In this thesis, we study the application of spectral representations to the solution of problems in seismic exploration, the synthesis of fractal surfaces and the identification of correlations between one-dimensional signals. We apply a new approach, called Wavelet Coherency, to the study of stratigraphic correlation in well log signals, as an attempt to identify layers from the same geological formation, showing that the representation in wavelet space, with introduction of scale domain, can facilitate the process of comparing patterns in geophysical signals. We have introduced a new model for the generation of anisotropic fractional brownian surfaces based on curvelet transform, a new multiscale tool which can be seen as a generalization of the wavelet transform to include the direction component in multidimensional spaces. We have tested our model with a modified version of the Directional Average Method (DAM) to evaluate the anisotropy of fractional brownian surfaces. We also used the directional behavior of the curvelets to attack an important problem in seismic exploration: the atenuation of the ground roll, present in seismograms as a result of surface Rayleigh waves. The techniques employed are effective, leading to sparse representation of the signals, and, consequently, to good resolutions

Fisioterapia respiratória em crianças com pneumonia: revisão sistemática

Introduction: Pneumonia is an inflammatory lung disease and it is the greatest cause of deaths in children younger than five years of age worldwide. Chest physiotherapy is widely used in the treatment of pneumonia because it can help to eliminate inflammatory exudates and tracheobronchial secretions, remove airway obstructions, reduce airway resistance, enhance gas exchange and reduce the work of breathing. Thus, chest physiotherapy may contribute to patient recovery as an adjuvant treatment even though its indication remains controversial. Objectives: To assess the effectiveness of chest physiotherapy in relation to time until clinical resolution in children (from birth up to 18 years old) of either gender with any type of pneumonia. Methods: We searched CENTRAL 2013, Issue 4; MEDLINE (1946 to May week 4, 2013); EMBASE (1974 to May 2013); CINAHL (1981 to May 2013); LILACS (1982 to May 2013); Web of Science (1950 to May 2013); and PEDro (1950 to May 2013). We consulted the ClinicalTrials.gov and the WHO ICTRP registers to identify planned, ongoing and unpublished trials. We consulted the reference lists of relevant articles found by the electronic searches for additional studies. We included randomised controlled trials (RCTs) that compared chest physiotherapy of any type with no chest physiotherapy in children with pneumonia. Two review authors independently selected the studies to be included in the review, assessed trial quality and extracted data. Results: Three RCTs involving 255 inpatient children are included in the review. They addressed conventional chest physiotherapy, positive expiratory pressure and continuous positive airway pressure. The following outcomes were measured: duration of hospital stay, time to clinical resolution (observing the following parameters: fever, chest indrawing, nasal flaring, tachypnoea and peripheral oxygen saturation levels), change in adventitious sounds, change in chest X-ray and duration of cough in days. Two of the included studies found a significant improvement in respiratory rate and oxygen saturation whereas the other included study failed to show that standardised respiratory physiotherapy and positive expiratory pressure decrease the time to clinical resolution and the duration of hospital stay. No adverse effects related to the interventions were xvi described. Due to the different characteristics of the trials, such as the duration of treatment, levels of severity, types of pneumonia and the techniques used in children with pneumonia, as well as differences in their statistical presentation, we were not able to pool data. Two included studies had an overall low risk of bias whereas one included study had an overall unclear risk of bias. Conclusion: Our review does not provide conclusive evidence to justify the use of chest physiotherapy in children with pneumonia due to a lack of data. The number of included studies is small and they differed in their statistical presentation

Avaliação de implementação da Educação Superior a Distância: o caso da Secretaria de Educação a Distância da Universidade Federal do Rio Grande do Norte SEDIS/UFRN

The considerable expansion of Distance Education registered in recent years in Brazil raises the importance of debate about how the implementation of this policy has been happening so that formulators and implementers make better informed decisions, maximizing results, identifying successes and overcoming bottlenecks. This study aims to evaluate the implementation process of Distance Education policy by Secretary of Distance Education of the Federal University of Rio Grande do Norte. For this, we sought to use an evaluation proposal consistent with this policy, and came to the one developed by Sonia Draibe (2001), which suggests an analysis called anatomy of evaluation general process. To achieve the objectives, we made a qualitative research, case study type, using documentary research and semi-structured interviews with three groups of subjects who belong to the policy: managers, technicians and beneficiaries. It was concluded that: the implementation process needs a open contact channel between the management and technicians and beneficiaries; the lack of clarity in the dissemination of information between technicians produces noises that affects the outcomes; the absence of dissemination of internal and external actions contributes to the perpetuation of prejudice in relation to Distance Education; using selection criteria based on competence and merit contributes to form a team of skilled technicians to perform their function within the policy; an institution that do not enable technicians generates gaps that possibly will turn into policy implementation failures; all subjects involved in politics need internal evaluations to contribute to improvements in the implementation process, however, a gap is opened between the subjects if there is no socialization of results; the existence of an internal structure that manipulates financial resources and balances the budget from different maintainer programs is essencial; the consortium between IES and municipalities in presential support poles are bottlenecks in the process, since beneficiaries are exposed to inconsistency and lack of commitment of these local municipalities