Densidade mineral óssea de adolescentes do sexo feminino e suas relaçoes com biomarcadores ósseos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Digestible lysine levels for laying hens and their effects on egg quality

Egg quality of semi-heavy laying hens fed on low protein diets (14.0% CP) and on different lysine levels is evaluated, while maintaining the same ratio of digestible amino acids / digestible lysine. Four hundred and twenty commercial strain Isa Brown laying hens, 28 weeks old, were divided into 42 experimental plots. A completely randomized design with six treatments and seven replicates was employed in four production cycles of 28 days each. Treatments comprised Control - 16.92% CP; 0.750% digestible lysine. Treatments 1 to 5, with CP levels 14% and digestible lysine levels 0.600, 0.675, 0.750, 0.825 and 0.900% respectively. Levels of Treatments 1 and 2 (0.546 and 0.640% digestible Met + Cys / 0.600 and 0.675% digestible lysine) provided smaller egg size. On the other hand, eggs had higher shell percentage when compared to control diet. When compared to other digestible amino acids, digestible lysine requirement may be estimated at 0.750% in a diet with 14% CP, which corresponds to the average daily intake of 876 mg dig. lysine hen-1 day-1 and 798 mg dig. Met + Cys hen-1 day-1, without jeopardizing performance and eggs' internal and external quality.

Cana-de-açúcar com irrigação por gotejamento em dois espaçamentos entrelinhas de plantio

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relationship between chronological and bone ages and pubertal stage of breasts with bone biomarkers and bone mineral density in adolescents

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ingestão Oral e Grau de Comprometimento da Disfagia Orofaríngea Neurogênica Pré e Pós-Fonoterapia

Objective. To compare, pre- and post-swallowing therapy, the level of oral intake scale, and the degree of severity of neurogenic oropharyngeal dysphagia. Method. 19 patients with oropharyngeal dysphagia: 10 Post-Stroke adults, aged from 44 years to 76 years (group 1 – G1), and nine children with Cerebral Palsy, aged from two years and five months to 15 years (group 2 – G2). We excluded individuals in the process of spontaneous recovery. We held retrospective analysis of clinical protocols for clinical speech therapy evaluation with classification of the degree of dysphagia severity, applied before and after swallowing therapy. We used the Functional Oral Intake Scale - FOIS to assess the level of oral ingestion, pre and post-swallowing therapy. Results. The degree of commitment of dysphagia was favorable change only in adults, and in FOIS these changes occurred in both groups. Conclusion. There were favorable changes in the degree of impairment of oropharyngeal dysphagia and levels of FOIS, pre and post - speech therapy in stroke, but in ECINP markers used showed no favorable changes should even be reviewed for application in this population. Future studies are needed to investigate the variables in this sample.

Análise histopatológica de biópsia prostática guiada pelo ultrassom transretal com 10 e 12 fragmentos: ensaio clínico prospectivo controlado

Pós-graduação em Bases Gerais da Cirurgia - FMB

Physical, Thermal and Water-Sorption Properties of Passion Fruit Seeds

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of the iron doping on the thermal decomposition of the polymeric precursor for the titanium dioxide powder synthesis

The Polymeric Precursor Method has proved suitable for synthesizing reactive powders using low temperatures of calcination, especially when compared with conventional methods. However, during the thermal decomposition of the polymeric precursor the combustion event can be releases an additional heat that raises the temperature of the sample in several tens of degrees Celsius above the set temperature of the oven. This event may be detrimental to some material types, such as the titanium dioxide semiconductor. This ceramic material has a phase transition at around 600 ° C, which involves the irreversible structural rearrangement, characterized by the phase transition from anatase to rutile TiO2 phase. The control of the calcination step then becomes very important because the efficiency of the photocatalyst is dependent on the amount of anatase phase in the material. Furthermore, use of dopant in the material aims to improve various properties, such as increasing the absorption of radiation and in the time of the excited state, shifting of the absorption edge to the visible region, and increasing of the thermal stability of anatase. In this work, samples of titanium dioxide were synthesized by the Polymeric Precursor Method in order to investigate the effect of Fe (III) doping on the calcination stages. Thermal analysis has demonstrated that the Fe (III) insertion at 1 mol% anticipates the organic decomposition, reducing the combustion event in the final calcination. Furthermore, FTIR-PAS, XRD and SEM results showed that organic matter amount was reduced in the Fe (III)-doped TiO2 sample, which reduced the rutile phase amount and increased the reactivity and crystallinity of the powder samples.

Effects of the addition of ions barium on the structural and electrical properties of PZT ceramic

Lead zirconate titanate, with Zr/Ti ratio of 53/47 was prepared by the polymeric precursor method. It was investigated the barium (II) modification at 0.0, 0.2, 0.4 and 0.6 mol% in substitution to the lead (II) cation in A site of perovskite structure. The powder samples were characterized by XRD and the diffraction patterns were used to Rietveld refinement. The percentages of tetragonal and rhombohedral phases and a systematic study of the effect of barium (II) on the morphology and the dielectric properties of PZT were carried out. The results showed that the tetragonal phase is favored and the ceramic density is improved with the barium (II) insertion. The Curie temperature (Tc) is increased besides the slight reduction of dielectric constant (Kc).

Vigilância do vpirus da dengue e circulação dos sorotipos presentes em São José do Rio Preto entre 2011 e 2014

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Raloxifene enhances peri-implant bone healing in osteoporotic rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Impact of the temperament of Nellore cows on the quality of handling and pregnancy rates in fixed-time artificial insemination

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Morphological characterization by SEM, TEM and AFM of nanoparticles and functional nanocomposites based on natural rubber filled with oxide nanopowders

Nanocomposites were prepared from mixture of different concentrations of ferroelectric nanoparticles in an elastomeric matrix based on the vulcanized natural rubber. The morphological characterization of nanocomposites was carried out using Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) and Atomic force microscopy (AFM). The nanocrystalline ferroelectric oxide is potassium strontium niobate (KSN) with stoichiometry KSr2Nb5O15, and was synthesized by the chemical route using a modified polyol method, obtaining particle size and microstrain equal to 20 nm and 0.32, respectively. These ferroelectric nanoparticles were added into the natural rubber in concentrations equal to 1, 3, 5, 10, 20 and 50 phr (parts per hundred of rubber) forming ferroelectric nanocomposites (NR/KSN). Using morphological characterization, we identified the maximum value of surface roughness at low concentrations, in particular, sample with 3 phr of nanoparticles and factors such as encapsulation and uniformity in the distribution of nanoparticles into the natural rubber matrix are investigated and discussed.

Study of ceramic block manufacture with the addition of waste from iron ore extraction

This work is intended to study the possibility of adding an amount of waste from iron mining in the ceramic mass. Clay and coal, from Vale do Paraiba, Sao Paulo, Brazil, were used in this research. These raw materials are used in the ceramic block manufacture. Clay and waste were analyzed by X-ray fluorescence and X-ray diffraction, particle size, differential thermal and thermogravimetric analysis. Liquid limit and plasticity index tests were performed in order to determine the amount of waste that which should be used in the ceramic mass. After determining the amount of waste, all samples were uniaxially pressed and sintered at 900 degrees C. Surface roughness measurements, apparent porosity and bulk density technique and three-point flexural tests were also performed to characterize the samples. The results showed that by adding the exact amount of waste, which was determined by the essays, it is possible to manufacture solid bricks.