Evaluation of High-Slump Concrete for Bridge Deck Overlays, TR-427, 2005

The Iowa Method for bridge deck overlays has been very successful in Iowa since its adoption in the 1970s. This method involves removal of deteriorated portions of a bridge deck followed by placement of a layer of dense (Type O) Portland Cement Concrete (PCC). The challenge encountered with this type of bridge deck overlay is that the PCC must be mixed on-site, brought to the placement area and placed with specialized equipment. This adds considerably to the cost and limits contractor selection, because not all contractors have the capability or equipment required. If it is possible for a ready-mix supplier to manufacture and deliver a dense PCC to the grade, then any competent bridge deck contractor would be able to complete the job. However, Type O concrete mixes are very stiff and generally cannot be transported and placed with ready-mix type trucks. This is where a “super-plasticizer” comes in to use. Addition of this admixture provides a substantial increase in the workability of the concrete – to the extent that it can be delivered to the site and placed on the deck directly out of a ready-mix truck. The objective of this research was to determine the feasibility of placing a deck overly of this type on county bridges within the limits of county budgets and workforce/contractor availability.

Developing an Effective Construction Training Program for Hispanic and American Supervisors and Craft Workers, 2007

Hispanics are a large and growing part of the United States workforce. Projections of the U.S. Census Bureau (2001) state that, by the year 2050, Hispanics will account for 25% of the population. For the Midwest in particular, the Hispanic population is expected to increase 35% by the year 2025. The construction industry is expected to experience a greater percentage increase of its Hispanic population, due to the labor-intensive nature of the industry. This study addresses the expected increase of Hispanic workers in the construction industry by testing the best approaches for delivering training to construction crews with Hispanic workers as well as American supervisors and laborers in the state of Iowa. The research methodology consisted of assessing the effects on communication, safety, work environment, and productivity as a result of the integration training. Results show that integration on-site training decreases workers’ desire to move and increases quality of work and productivity. Most importantly, experimental design was used to show the increasing levels of direct construction communication due to the Toolbox Integration Course for Hispanic Workers and American Supervisors (TICHA) designed as part of this project. This study recommends the creation of a quasi-governmental or association program that can offer continuous research and training that can benefit the construction industry as well as society as a whole. The industry involvement in this process is crucial for contractors. Not only do contractors benefit from reduced insurance premiums when workers act safely, but workers with better communication skills are more productive.

07011-003 Keg Creek Watershed Final Report

Mills County proposes to reduce the identified impairment of the watershed, Keg Creek, by eliminating one of the main reasons for the impairment - non-conforming, on-site septic tanks that allow effluent to drain into the creek from the unincorporated community of Mineola. This has been identified by the county as a major priority. Therefore, the county proposes to construct a collection system and lagoon treatment facility, which would eliminate effluent from draining into Keg Creek. Regional Water will own, operate, and manage the collection and treatment systems in Mineola for Mills County.

Health consultation : Buchanan Bulk Oil -- Ma & Pa Stores West 6th Avenue and South F Street, Oskaloosa, Mahaska County, Iowa (2006)

The Iowa Department of Natural Resources (IDNR) has requested the Iowa Department of Public Health (IDPH) Hazardous Waste Site Health Assessment Program to evaluate the potential health impacts of the future development at the Buchanan Bulk Oil – Ma & Pa Stores site. A Targeted Brownfields Assessment was completed by the IDNR at this site to measure existing on-site contaminants. Assistance was sought from the IDPH to determine potential health risks if the site was developed for residential use. This health consultation addresses potential health risks to people from exposure to the contaminants found in the soil and groundwater within the property boundary. The information in this health consultation was current at the time of writing. Data that emerges later could alter this document’s conclusions and recommendations.

Patient doses in CT examinations in Switzerland: implementation of national diagnostic reference levels.

Diagnostic reference levels (DRLs) were established for 21 indication-based CT examinations for adults in Switzerland. One hundred and seventy-nine of 225 computed tomography (CT) scanners operated in hospitals and private radiology institutes were audited on-site and patient doses were collected. For each CT scanner, a correction factor was calculated expressing the deviation of the measured weighted computed tomography dose index (CTDI) to the nominal weighted CTDI as displayed on the workstation. Patient doses were corrected by this factor providing a realistic basis for establishing national DRLs. Results showed large variations in doses between different radiology departments in Switzerland, especially for examinations of the petrous bone, pelvis, lower limbs and heart. This indicates that the concept of DRLs has not yet been correctly applied for CT examinations in clinical routine. A close collaboration of all stakeholders is mandatory to assure an effective radiation protection of patients. On-site audits will be intensified to further establish the concept of DRLs in Switzerland.

Exploratory survey about dietary supplement use: a hazardous and erratic way to improve one's health?

INTRODUCTION: Dietary supplement (DS) use increased rapidly in recent years. However, evidence of benefits of many DSs for healthy users is scarce and may not equate with known risks of overdose, drug interaction and recently discovered negative long-term effects. This exploratory study aimed to investigate the perceptions and motivations of DS users in Lausanne, Switzerland. METHOD: A convenience sample (n = 147) was recruited at the entrances of local sales points. Data were collected in on-site semistructured interviews that assessed dietary supplementation habits. RESULTS: The majority of DSs were all-in-one products, containing a mixture of minerals and vitamins, or products containing only minerals. Among the 147 users, 72 (49%) used one all-in-one product and 3 (2%) used two all-in-one products. Thirty-one (21%) consumers did not know for at least one product what the purpose of their DS use was. Seventy-five percent of participants thought that DS use presents no risk or nearly no risk. Only 49% of participants stated that their physicians were informed about their consumption. Although men searched more often for potential risks (p <0.001), they turned less frequently to health professionals to get this information (p = 0.007). DISCUSSION: As in other surveys performed elsewhere, our study shows that, in Lausanne (Switzerland), DSs are commonly used as mixed products. Risk perception seems generally low among DS users. Physicians should be trained to evaluate patients' perceived needs and DS consumption in order to provide good evidence-based information or to propose alternatives to DS use.

Assessing catchment-scale erosion and yields of suspended solids from improved temperate grassland.

This paper quantifies the yields of suspended solids (SS) from a headwater catchment managed as improved temperate grassland, providing the first direct, catchment-scale evidence of the rates of erosion from this land-use in the UK and assessing the threat posed to aquatic ecosystems. High-resolution monitoring of catchment hydrology and the concentrations of SS and volatile organic matter (VOM) were carried out in the first-order channel of the Den Brook headwater catchment in Devon (UK) during the 2006-2007 hydrological season. The widely used 'rating curve' (discharge-concentration) approach was employed to estimate yields of SS, but as demonstrated by previous researchers, this study showed that discharge is a poor predictor of SS concentrations and therefore any yields estimated from this technique are likely to be highly uncertain. Nevertheless, for the purpose of providing estimates of yields that are comparable to previous studies on other land uses/sources, this technique was adopted albeit in an uncertainty-based framework. The findings suggest that contrary to the common perception, grasslands can be erosive landscapes with SS yields from this catchment estimated to be between 0.54 and 1.21 t ha(-1) y(-1). In terms of on-site erosion problems, this rate of erosion does not significantly exceed the commonly used 'tolerable' threshold in the UK ( approximately 1 t ha(-1) y(-1)). In terms of off-site erosion problems, it is argued here that the conventional expression of SS yield as a bulk annual figure has little relevance to the water quality and ecological status of surface waters and therefore an alternative technique (the concentration-frequency curve) is developed within this paper for the specific purpose of assessing the ecological threat posed by the delivery of SS into surface waters. This technique illustrates that concentrations of SS recorded at the catchment outlet frequently exceed the water quality guidelines, such as those of the EU Freshwater Fisheries Directive (78/659/EC), and pose a serious threat to aquatic organisms. It is suggested that failure to recognise improved temperate grasslands as a potential source of particulate material could result in the non-compliance of surface waters to water quality guidelines, deterioration of ecological status and failure of water quality remediation measures.

Logging residues from regeneration fellings for biofuel production - a GIS-based availability and supply cost analysis

Finland has large forest fuel resources. However, the use of forest fuels for energy production has been low, except for small-scale use in heating. According to national action plans and programs related to wood energy promotion, the utilization of such resources will be multiplied over the next few years. The most significant part of this growth will be based on the utilization of forest fuels, produced from logging residues of regeneration fellings, in industrial and municipal power and heating plants. Availability of logging residues was analyzed by means of resource and demand approaches in order to identify the most suitable regions with focus on increasing the forest fuel usage. The analysis included availability and supply cost comparisons between power plant sites and resource allocation in a least cost manner, and between a predefined power plant structure under demand and supply constraints. Spatial analysis of worksite factors and regional geographies were carried out using the GIS-model environment via geoprocessing and cartographic modeling tools. According to the results of analyses, the cost competitiveness of forest fuel supply should be improved in order to achieve the designed objectives in the near future. Availability and supply costs of forest fuels varied spatially and were very sensitive to worksite factors and transport distances. According to the site-specific analysis the supply potential between differentlocations can be multifold. However, due to technical and economical reasons ofthe fuel supply and dense power plant infrastructure, the supply potential is limited at plant level. Therefore, the potential and supply cost calculations aredepending on site-specific matters, where regional characteristics of resourcesand infrastructure should be taken into consideration, for example by using a GIS-modeling approach constructed in this study.

Evaluation et prise en charge des risques de blessure des ischio-jambiers chez le sprinteur

La déchirure des ischio-jambiers est la blessure non-traumatique la plus fréquemment rencontrée dans les sports demandant une course à haute vitesse. Les ischio-jambiers sont particulièrement vulnérables lors de la fin de phase d'oscillation du sprint étant donné qu'ils se contractent excentriquement alors qu'ils sont en position d'allongement. Le renforcement excentrique a été montré comme étant une méthode efficace pour diminuer le risque de blessure. Cependant, les exercices classiquement utilisés comme le Nordic hamstring ne soumettent pas les ischio-jambiers à un niveau d'allongement spécifique au sprint. Dès lors, l'objectif de cette thèse était d'évaluer le fonctionnement des ischio-jambiers à différents niveaux d'allongement musculo- tendineux puis de transposer dans la pratique les résultats obtenus afin de concevoir des exercices plus spécifiques aux besoins des athlètes. Avant cela, une première partie avait pour but de proposer de nouvelles méthodes d'évaluation de terrain des ischio-jambiers. Les différents travaux réalisés pour cette thèse ont permis : 1) de proposer deux nouveaux outils de terrain pour l'évaluation de la flexibilité et de la force des ischio-jambiers ; 2) de montrer que le niveau d'allongement influence directement la force produite par les ischio-jambiers et de suggérer que ce niveau d'allongement semble être un stimulus au moins aussi déterminant que le mode de contraction musculaire pour générer des adaptations de l'architecture musculaire propices à la diminution du risque de blessure ; 3) de proposer des modalités spécifiques de renforcement des ischio-jambiers destinées aux sprinteurs dans une perspective de prévention des blessures et de montrer l'efficacité de ces recommandations sur l'amélioration d'un certain nombre de facteurs de risque de blessure. Finalement, ce travail a ouvert de nouvelles perspectives allant de la proposition d'exercices de renforcement de terrain au développement d'un système motorisé spécifique au sprint permettant le renforcement et l'évaluation de la force des ischio-jambiers en passant par différents projets de recherche. -- High-speed running sports accounts for the majority of hamstring strains. The terminal swing phase of the running cycle is believed to be the most hazardous as the hamstrings are undergoing an active lengthening contraction in a long muscle length position. Prevention-based strength training relies mainly on eccentric exercises. However, most hamstrings exercises like the Nordic hamstring are performed at an inadequately low hip-flexion angle. Thus, the objective of this thesis was to assess the hamstring function at different muscle lengths and depending on the obtained results to design strength exercises more specific to the athlete's need. Before that, a first part of this thesis aimed to develop new assessment methods of the hamstring on site. The different studies included in the present thesis allowed: 1) to propose two new methods to test the hamstring flexibility and strength on the field; 2) to show that the hamstring muscle length directly influences its level of strength, and to suggest that the training range of motion could be a dominant stimulus (as important than contraction type) for modifying the muscle architecture, which leads to a decrease in hamstring injury risk; 3) to define sprint specific parameters for prevention-based strength training, and to show the efficiency of these recommendations on the improvement of several injury risk factors for the hamstring. Finally, this thesis proposed new perspectives: 1) new strength exercises on site; 2) the development of a motorised device specific for the sprint which could be used to strength and to assess the hamstring; 3) several future research projects.

Teollisuuskylmälaitoksen tekniikka ja kustannukset

Työssä on tarkasteltu kompressori- ja absorptiokylmälaitoksien teknisiä ratkaisuja ja laitoksien investointi- ja käyttökustannuksia. Työssä on keskitytty laitoksiin, jotka tuottavat alle nolla Celsiusasteen lämpötiloja. Esimerkkitapauksessa on selvitetty panimon ja meijerin kylmälaitoksen tekniikka ja kustannukset. Tutkimus perustuu kirjallisuuteen, haastatteluihin ja mittaustuloksiin. Kirjallisuuden avulla on selvitetty kylmälaitoksien tekniikkaa ja kustannusten muodostumista. Haastattelujen avulla on kerätty tietoa esimerkkikohteen nykyisistä laitteista, tulevaisuuden kylmätarpeesta ja kohteeseen sopivista laiteratkaisuista. Mittaustietojen avulla on arvioitu kylmäenergian tarve. Työn avulla on saatu näkemys esimerkkikohteeseen sopivasta kylmälaitoksesta ja sen aiheuttamista kustannuksista. Näiden tietojen avulla voidaan selvittää mahdollisten kylmäasiakkaiden kiinnostus kylmäenergian ostamiseen. Hankkeen toteutuessa työtä voidaan käyttää pohjana laitoksen ja kylmätoiminnan suunnittelussa.

Sahalaitosten häiriömittauskäytännön yhtenäistäminen

Työn tavoitteena oli selvittää kahdeksan sahalaitoksen häiriöseurannan nykytila sekä selvittämisen jälkeen ehdottaa sahalaitoksille otettavaksi käyttöön yhtenäinen samoihin häiriön luokitus- ja kirjaamisperiaatteisiin perustuva mittauskäytäntö. Yhtenäisen käytännön myötä sahalaitoksilta saatavat häiriötiedot ovat sahalaitosten kesken vertailukelpoisia. Mittauskäytännön yhtenäistämisellä pyritään nostamaan tuotantolinjojen käytettävyyttä. Sahalaitosten häiriömittauskäytännöissä oletettiin olevan merkittäviä eroja. Työ suoritettiin lähettämällä kysymykset sähköpostilla etukäteen sahalaitoksille, jonka jälkeen käytiin sahalaitoksissa haastattelemassa häiriöasioiden kanssa tekemisissä olevia henkilöitä. Haastattelujen jälkeen sahalaitoksilta saatuja tietoja täydennettiin sähköpostin välityksellä. Näiden toimintatapojen lisäksi tutkittiin sahalaitoksilta saatuja häiriöraportteja ja syykoodilistoja sekä verrattiin tutkimuksessa satuja tuloksia aihetta käsittelevään kirjallisuuteen. Tutkimustulokset vahvistavat työn aloitusvaiheessa tehdyn oletuksen, jonka mukaan sahalaitosten häiriömittauskäytännöissä on merkittäviä eroja. Tutkimusta hyödyntäen asiantuntijatyöryhmä yhtenäisti sahalinjojen ja tasaamoiden pien-häiriöiden ja varsinaisten häiriöiden laukaisurajat sekä häiriöiden mittauspaikat. Myös syykoodilistat yhtenäistettiin. Tämän lisäksi muodostettiin yhtenäinen vertailuraportti, jotta sahalaitosten häiriötietojen vertaileminen on mahdollista.

Biologisen jätevedenpuhdistuksen ilmastuksen tehostaminen

Työssä tutkittiin, mikä on kustannustehokkain tapa lisätä ilmastuskapasiteettia ja selvitettiin, saostaako vesilaitokselta flotaatioaltaasta poistettava ferrisulfaattisakka jäteveden fosforia esiselkeyttimessä. Työssä määritettiin teoreettinen hapentarve ilmastusaltaassa maksimikuormituksen aikana ja hapensiirtonopeus jäteveteen olemassa olevalla laitteistolla. Hapensiirtonopeuden funktion korjauskertoimet  ja  sekä kokonaishapensiirtokerroin määritettiin laboratorio-olosuhteissa. Lisäksi laskettiin kuinka paljon nykyisten ilmastimien kautta saadaan happea jäteveteen liukenemaan ja verrattiin tätä lukua teoreettiseen hapentarpeeseen. Jälkimmäistä menettelytapaa käyttäen arvioitiin lisähapen tarve. Tulokseksi saatiin, että maksimi BOD-kuormituksen aikana happea tarvitsee saada jäteveteen liuotettua 5200 m³/d lisää. Ilmastuskapasiteetin lisäyksen kustannuslaskelmassa verrattiin neljää vaihtoehtoa: puhdasta happea liuotettuna happimattojen kautta tai OKI-ilmastimen kautta, onsite-happilaitoksen puhdasta happea liuotettuna OKI-ilmastimen kautta tai ilman happea liuotettuna jäteveteen EDI-ilmastimien kautta. Laskelmat osoittivat uusien EDI-ilmastimien hankinnan olevan edullisin vaihtoehto pitkällä aikavälillä. Vaikka EDI-ilmastimien investointikustannukset ovat korkeat, tulevat ne käyttökustannuksiltaan kaikkein edullisimmaksi. Vesilaitokselta tulevan rautasuolasakan fosforia saostavaa vaikutusta tutkittiin laboratoriossa astiakokein. Näytteet otettiin vesilaitokselta jätevesilaitokselle menevästä rautasuolasakasta sekä esiselkeyttimen kirkasteesta. Näitä eri suhteissa keskenään sekoittamalla saatiin selville, että rautasuolasakka ja sakan mukana tuleva reagoimaton rautasuola saostavat liukoista ja kokonaisfosforia esiselkeytyksessä.

Haja-asutusalueiden jätevesien käsittelyn tulevaisuus

Tässä työssä tarkastellaan haja-asutusalueilla käytössä olevia kiinteistökohtaisia jäteveden käsittelymenetelmiä. Koelaitteistona oli biologinen pienpuhdistamo, jonka toimintaa tutkittiin tavanomaisessa kotitalouskäytössä. Tarkoituksena oli selvittää jäteveden biologisen suodatuksen soveltuvuutta haja-asutuksen jätevesien käsittelyyn. Kirjallisuusosiossa käsitellään haja-asutuksen jätevesien aiheuttamia ympäristövaikutuksia, ympäristölainsäädäntöä ja yleisesti käytössä olevia erilaisia jäteveden käsittelymenetelmiä, sekä vaihtoehtoisia käymäläratkaisuja. Ennen kokeellisen osuuden alkua asennettiin pienpuhdistamo oheislaitteineen omakotitalon viemärijärjestelmään. Tämän jälkeen päästiin tutkimaan puhdistamon puhdistustehokkuutta ja ympäristökuormitusta lähtevästä jätevedestä keräilynäyttein. Puhdistamolta lähtevän jäteveden kuormitusarvoja verrattiin Ympäristöministeriössä suunnitteilla oleviin enimmäisrajoihin: BOD7 5 g/(d,as), kokonaisfosfori 0,33 g/(d,as) ja kokonaistyppi 8,4 g/(d,as). Mitatut BOD7- ja kokonaistyppikuormitukset alittivat raja-arvot kerran. Muilla mittauskerroilla kuormitus oli enimmäisrajoja suurempi. Kokonaisfosforikuormitus oli kaikilla mittauskerroilla moninkertainen enimmäisrajaan verrattuna. Puhdistamon todellinen BOD7-reduktio oli noin 60 %. Kokonaisfosforin ja kokonaistypen reduktiot vaihtelivat paljon ollen kokonaisfosforilla korkeimmillaan 12 % ja kokonaistypellä 29 %.

Veneer Properties Determination for Plywood Manufacturing

The objective in this Master's Thesis was to determine and verify quality criteria for veneer in plywood manufacturing. In plywood manufacturing the veneer quality has a decisive part how well it can be produced to a final product. Modern equipment run at high speed and capacity. These machines require a good quality veneer to be able to maintain them. The quality criteria determination was done after the dominant veneer properties were determined. This research focuses to the birch veneer quality determination. The machines involved in the veneer manufacturing are introduced in the materials and methods section. The different veneer properties are determined and the measuring devices to measure these properties are examined. There are many parts in veneer manufacturing and these have different requirements to the veneer quality. To determine and verify these properties for every machine was the most demanding part of this Master's Thesis. During the research some new ideas and ways to measure veneer properties were also tested. Veneer properties and quality was followed in a factory environment and in a test runs at the Raute. Different machines were followed carefully in the production environment while for example test pieces were taken from veneers that broke on the line. Sample pieces were tested on site or delivered to Nastola for more extensive testing. Based on the tests and research the criteria for veneer to every machine involved in the veneer production were created. These veneer quality tolerances are recommendations to ensure that the machine operation will not be affected by the veneer quality.