Photoluminescence studies on rare earth titanates prepared by self-propagating high temperature synthesis method

The laser-induced luminescence studies of the rare earth titanates (R2Ti2O7) (R = La, Nd and Gd) using 355 nm radiation from an Nd:YAG laser are presented. These samples with submicron or nanometer size are prepared by the self-propagating high temperature synthesis (SHS) method and there is no known fluorescence shown by these rare earths in the visible region. Hence, the luminescence transitions shown by the La2Ti2O7 near 610 nm and Gd2Ti2O7 near 767 nm are quite interesting. Though La3+ ions with no 4f electrons have no electronic energy levels that can induce excitation and luminescence processes in the visible region, the presence of the Ti3+ ions leads to luminescence in this region.

Measurements of Electromagnetic Shielding Effect Using Htsc Materials

A simple experimental set-up is described to measure the electromagnetic shielding property of high Tc superconducting samples. Measurements were performed using HTSC materials in the form of laser ablated thin films, powders and sintered pellets. Samples used were Gd-123 in pure and doped form as well as a few Bi-based superconducting ceramics. For comparison, similar measurements were carried out on metals like aluminium, copper and μ metal. Very effective shielding was observed for HTSC materials compared to the conventional materials mentioned above. However it also depended on the sample types and poor shielding was observed for powdered HTSC material in comparison to thin films prepared by laser ablation.

A new inexpensive method for the preparation of acicular precursors for magnetic recording media

Magnetic materials meant for audio/video recording applications necessitate that polycrystalline materials be in acicular shape. So preparation of acicular precursors for magnetic storage materials assumes significance. The employment of aqueous solutions do not produce needle shape crystallites. Glycerol is one of the complexing media used for the precipitation of ferrous oxalate dihydrate. An inexpensive method using starch for preparation of acicular particles is described. The influence of an additive namely Gd on acicularity is also investigated

Influence of dopants on the properties of maghemite

Preparatiun or aci cular maghemi te containing dopan ls li ke Mg. i and Gd and their characleris,llion us ing different analytica l techniques have been reported. These in vestigat ions reveal that the addition of dopants li ke Mg. Ni and Gd modifies the magnetic properties without cfrecting any structural changes. The opt ical bandgaps of these doped compositions have ,li S() hecn determ ined. Evidence is ,li so av,li lab le from spectroscopic investi gations suggest ing thalmaghcllli te prepared vi,l the ()xa l,ltc precursor route does nm exhi bit a hydrogen fe rrite structure

Behaviour of REEs in a tropical estuary and adjacent continental shelf of southwest coast of India: Evidence from anomalies

The distribution and accumulation of the rare earth elements (REE) in the sediments of the Cochin Estuary and adjacent continental shelf were investigated. The rare earth elements like La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu and the heavy metals like Mg, V, Cr, Mn, Fe, Cu, Zn, U, Th were analysed by using standard analytical methods. The Post-Archean Australian Shale composition was used to normalise the rare earth elements. It was found that the sediments were more enriched with the lighter rare earth elements than the heavier ones. The positive correlation between the concentrations of REE, Fe and Mn could explain the precipitation of oxyhydroxides in the study area. The factor analysis and correlation analysis suggest common sources of origin for the REEs. From the Ce-anomalies calculated, it was found that an oxic environment predominates in all stations except the station No. 2. The Eu-anomaly gave an idea that the origin of REEs may be from the feldspar. The parameters like total organic carbon, U/Th ratio, authigenic U, Cu/Zn, V/Cr ratios revealed the oxic environment and thus the depositional behaviour of REEs in the region

Synthesis, Characterization and Applications of Modified TiO2 Systems

This thesis is divided in to 9 chapters and deals with the modification of TiO2 for various applications include photocatalysis, thermal reaction, photovoltaics and non-linear optics. Chapter 1 involves a brief introduction of the topic of study. An introduction to the applications of modified titania systems in various fields are discussed concisely. Scope and objectives of the present work are also discussed in this chapter. Chapter 2 explains the strategy adopted for the synthesis of metal, nonmetal co-doped TiO2 systems. Hydrothermal technique was employed for the preparation of the co-doped TiO2 system, where Ti[OCH(CH3)2]4, urea and metal nitrates were used as the sources for TiO2, N and metals respectively. In all the co-doped systems, urea to Ti[OCH(CH3)2]4 was taken in a 1:1 molar ratio and varied the concentration of metals. Five different co-doped catalytic systems and for each catalysts, three versions were prepared by varying the concentration of metals. A brief explanation of physico-chemical techniques used for the characterization of the material was also presented in this chapter. This includes X-ray Diffraction (XRD), Raman Spectroscopy, FTIR analysis, Thermo Gravimetric Analysis, Energy Dispersive X-ray Analysis (EDX), Scanning Electron Microscopy(SEM), UV-Visible Diffuse Reflectance Spectroscopy (UV-Vis DRS), Transmission Electron Microscopy (TEM), BET Surface Area Measurements and X-ray Photoelectron Spectroscopy (XPS). Chapter 3 contains the results and discussion of characterization techniques used for analyzing the prepared systems. Characterization is an inevitable part of materials research. Determination of physico-chemical properties of the prepared materials using suitable characterization techniques is very crucial to find its exact field of application. It is clear from the XRD pattern that photocatalytically active anatase phase dominates in the calcined samples with peaks at 2θ values around 25.4°, 38°, 48.1°, 55.2° and 62.7° corresponding to (101), (004), (200), (211) and (204) crystal planes (JCPDS 21-1272) respectively. But in the case of Pr-N-Ti sample, a new peak was observed at 2θ = 30.8° corresponding to the (121) plane of the polymorph brookite. There are no visible peaks corresponding to dopants, which may be due to their low concentration or it is an indication of the better dispersion of impurities in the TiO2. Crystallite size of the sample was calculated from Scherrer equation byusing full width at half maximum (FWHM) of the (101) peak of the anatase phase. Crystallite size of all the co-doped TiO2 was found to be lower than that of bare TiO2 which indicates that the doping of metal ions having higher ionic radius into the lattice of TiO2 causes some lattice distortion which suppress the growth of TiO2 nanoparticles. The structural identity of the prepared system obtained from XRD pattern is further confirmed by Raman spectra measurements. Anatase has six Raman active modes. Band gap of the co-doped system was calculated using Kubelka-Munk equation and that was found to be lower than pure TiO2. Stability of the prepared systems was understood from thermo gravimetric analysis. FT-IR was performed to understand the functional groups as well as to study the surface changes occurred during modification. EDX was used to determine the impurities present in the system. The EDX spectra of all the co-doped samples show signals directly related to the dopants. Spectra of all the co-doped systems contain O and Ti as the main components with low concentrations of doped elements. Morphologies of the prepared systems were obtained from SEM and TEM analysis. Average particle size of the systems was drawn from histogram data. Electronic structures of the samples were identified perfectly from XPS measurements. Chapter 4 describes the photocatalytic degradation of herbicides Atrazine and Metolachlor using metal, non-metal co-doped titania systems. The percentage of degradation was analyzed by HPLC technique. Parameters such as effect of different catalysts, effect of time, effect of catalysts amount and reusability studies were discussed. Chapter 5 deals with the photo-oxidation of some anthracene derivatives by co-doped catalytic systems. These anthracene derivatives come underthe category of polycyclic aromatic hydrocarbons (PAH). Due to the presence of stable benzene rings, most of the PAH show strong inhibition towards biological degradation and the common methods employed for their removal. According to environmental protection agency, most of the PAH are highly toxic in nature. TiO2 photochemistry has been extensively investigated as a method for the catalytic conversion of such organic compounds, highlighting the potential of thereof in the green chemistry. There are actually two methods for the removal of pollutants from the ecosystem. Complete mineralization is the one way to remove pollutants. Conversion of toxic compounds to another compound having toxicity less than the initial starting compound is the second way. Here in this chapter, we are concentrating on the second aspect. The catalysts used were Gd(1wt%)-N-Ti, Pd(1wt%)-N-Ti and Ag(1wt%)-N-Ti. Here we were very successfully converted all the PAH to anthraquinone, a compound having diverse applications in industrial as well as medical fields. Substitution of 10th position of desired PAH by phenyl ring reduces the feasibility of photo reaction and produced 9-hydroxy 9-phenyl anthrone (9H9PA) as an intermediate species. The products were separated and purified by column chromatography using 70:30 hexane/DCM mixtures as the mobile phase and the resultant products were characterized thoroughly by 1H NMR, IR spectroscopy and GCMS analysis. Chapter 6 elucidates the heterogeneous Suzuki coupling reaction by Cu/Pd bimetallic supported on TiO2. Sol-Gel followed by impregnation method was adopted for the synthesis of Cu/Pd-TiO2. The prepared system was characterized by XRD, TG-DTG, SEM, EDX, BET Surface area and XPS. The product was separated and purified by column chromatography using hexane as the mobile phase. Maximum isolated yield of biphenyl of around72% was obtained in DMF using Cu(2wt%)-Pd(4wt%)-Ti as the catalyst. In this reaction, effective solvent, base and catalyst were found to be DMF, K2CO3 and Cu(2wt%)-Pd(4wt%)-Ti respectively. Chapter 7 gives an idea about the photovoltaic (PV) applications of TiO2 based thin films. Due to energy crisis, the whole world is looking for a new sustainable energy source. Harnessing solar energy is one of the most promising ways to tackle this issue. The present dominant photovoltaic (PV) technologies are based on inorganic materials. But the high material, low power conversion efficiency and manufacturing cost limits its popularization. A lot of research has been conducted towards the development of low-cost PV technologies, of which organic photovoltaic (OPV) devices are one of the promising. Here two TiO2 thin films having different thickness were prepared by spin coating technique. The prepared films were characterized by XRD, AFM and conductivity measurements. The thickness of the films was measured by Stylus Profiler. This chapter mainly concentrated on the fabrication of an inverted hetero junction solar cell using conducting polymer MEH-PPV as photo active layer. Here TiO2 was used as the electron transport layer. Thin films of MEH-PPV were also prepared using spin coating technique. Two fullerene derivatives such as PCBM and ICBA were introduced into the device in order to improve the power conversion efficiency. Effective charge transfer between the conducting polymer and ICBA were understood from fluorescence quenching studies. The fabricated Inverted hetero junction exhibited maximum power conversion efficiency of 0.22% with ICBA as the acceptor molecule. Chapter 8 narrates the third order order nonlinear optical properties of bare and noble metal modified TiO2 thin films. Thin films were fabricatedby spray pyrolysis technique. Sol-Gel derived Ti[OCH(CH3)2]4 in CH3CH2OH/CH3COOH was used as the precursor for TiO2. The precursors used for Au, Ag and Pd were the aqueous solutions of HAuCl4, AgNO3 and Pd(NO3)2 respectively. The prepared films were characterized by XRD, SEM and EDX. The nonlinear optical properties of the prepared materials were investigated by Z-Scan technique comprising of Nd-YAG laser (532 nm,7 ns and10 Hz). The non-linear coefficients were obtained by fitting the experimental Z-Scan plot with the theoretical plots. Nonlinear absorption is a phenomenon defined as a nonlinear change (increase or decrease) in absorption with increasing of intensity. This can be mainly divided into two types: saturable absorption (SA) and reverse saturable absorption (RSA). Depending on the pump intensity and on the absorption cross- section at the excitation wavelength, most molecules show non- linear absorption. With increasing intensity, if the excited states show saturation owing to their long lifetimes, the transmission will show SA characteristics. Here absorption decreases with increase of intensity. If, however, the excited state has strong absorption compared with that of the ground state, the transmission will show RSA characteristics. Here in our work most of the materials show SA behavior and some materials exhibited RSA behavior. Both these properties purely depend on the nature of the materials and alignment of energy states within them. Both these SA and RSA have got immense applications in electronic devices. The important results obtained from various studies are presented in chapter 9.

Synthesis and Photoluminescence Properties of Novel Red Phosphors for White Light Emitting Diode Applications

Several series of Eu3+ based red emitting phosphor materials were synthesized using solid state reaction route and their properties were characterized. The present studies primarily investigated the photoluminescence properties of Eu3+ in a family of closely related host structure with a general formula Ln3MO7. The results presented in the previous chapters throws light to a basic understanding of the structure, phase formation and the photoluminescence properties of these compounds and their co-relations. The variation in the Eu3+ luminescence properties with different M cations was studied in Gd3-xMO7 (M = Nb, Sb, Ta) system.More ordering in the host lattice and more uniform distribution of Eu3+ ions resulting in the increased emission properties were observed in tantalate system.Influence of various lanthanide ion (Lu, Y, Gd, La) substitutions on the Eu3+ photoluminescence properties in Ln3MO7 host structures was also studied. The difference in emission profiles with different Ln ions demonstrated the influence of long range ordering, coordination of cations and ligand polarizability in the emission probabilities, intensity and quantum efficiency of these phosphor materials. Better luminescence of almost equally competing intensities from all the 4f transitions of Eu3+ was noticed for La3TaO7 system. Photoluminescence properties were further improved in La3TaO7 : Eu3+ phosphors by the incorporation of Ba2+ ions in La3+ site. New red phosphor materials Gd2-xGaTaO7 : xEu3+ exhibiting intense red emissions under UV excitation were prepared. Optimum doping level of Eu3+ in these different host lattices were experimentally determined. Some of the prepared samples exhibited higher emission intensities than the standard Y2O3 : Eu3+ red phosphors. In the present studies, Eu3+ acts as a structural probe determining the coordination and symmetry of the atoms in the host lattice. Results from the photoluminescence studies combined with the powder XRD and Raman spectroscopy investigations helped in the determination of the correct crystal structures and phase formation of the prepared compounds. Thus the controversy regarding the space groups of these compounds could be solved to a great extent. The variation in the space groups with different cation substitutions were discussed. There was only limited understanding regarding the various influential parameters of the photoluminescence properties of phosphor materials. From the given studies, the dependence of photoluminescence properties on the crystal structure and ordering of the host lattice, site symmetries, polarizability of the ions, distortions around the activator ion, uniformity in the activator distribution, concentration of the activator ion etc. were explained. Although the presented work does not directly evidence any application, the materials developed in the studies can be used for lighting applications together with other components for LED lighting. All the prepared samples were well excitable under near UV radiation. La3TaO7 : 0.15Eu3+ phosphor with high efficiency and intense orange red emissions can be used as a potential red component for the realization of white light with better color rendering properties. Gd2GaTaO7 : Eu3+, Bi2+ red phosphors give good color purity matching to NTSC standards of red. Some of these compounds exhibited higher emission intensities than the standard Y2O3 : Eu3+ red phosphors. However thermal stability and electrical output using these compounds should be studied further before applications. Based on the studies in the closely related Ln3MO7 structures, some ideas on selecting better host lattice for improved luminescence properties could be drawn. Analyzing the CTB position and the number of emission splits, a general understanding on the doping sites can be obtained. These results could be helpful for phosphor designs in other host systems also, for enhanced emission intensity and efficiency.

INFO2009 Coursework 2 - TeamTT

Resources produced for INFO2009 coursework 2 for TeamTT.

Determinantes de la gestión clínica en atención médica domiciliaria de personas con secuelas de enfermedad cerebro-vascular

La atención domiciliaria constituye hoy una modalidad de atención que permite solventar las dificultades derivadas de la sobreocupación hospitalaria y la cronicidad, los cuales constituyen un problema de interés en salud pública en los países desarrollados y que pueden ser manejados en el domicilio del paciente como una opción costo-efectiva y segura. Para lo cual es necesario buscar estrategias que permitan su desarrollo, gestión de riesgos y modelos de atención, logrando mejorar las condiciones de salud de la población. Uno de los principales retos de la gestión de programas de atención en salud, se encuentra en definir los aspectos donde intervenir para potenciar la eficacia y la calidad en la prestación del servicio, por lo que dichos aspectos se constituyen como determinantes de la atención del paciente y su familia. En este documento se abordan los principales determinantes en la atención de personas con secuelas de Enfermedad cerebrovascular, que reciben manejo medico domiciliario, con el objetivo de identificar las áreas prioritarias de intervención, garantizando una mejor gestión clínica en tres áreas específicas: sobrecarga del cuidador, Polimedicación y ulceras por decúbito.

Diseño de una estrategia de desarrollo responsable y sostenible de productividad estructurada en los soportes categóricos y enfoques productivos

El presente documento, tiene como finalidad presentar una estrategia de desarrollo responsable y sostenible social y ambientalmente, estructurada en cinco ejes categóricos y tres enfoques de la productividad, los cuales son determinados en el recorrido de la investigación.

Resultados en reducción abierta de cadera por via interna: necrosis avascular y concordancia interobservador

Introducción: la luxación típica de la cadera es una patología con alta incidencia, de ahí la necesidad de métodos efectivos para lograr una reducción de esta. Han surgido varios métodos de reducción, uno de estos métodos es la reducción abierta por vía interna. Metodología Estudió descriptivo retrospectivo, incluyo los casos operados de reducción abierta por vía interna en el Instituto de Ortopedia Infantil Roosevelt y Clínica Jorge Piñeros Corpas por uno de los tutores, desde enero de 2006 hasta junio de 2011, valorando estas caderas según los criterios de Salter de necrosis avascular (NAV), con un seguimiento mínimo de 18 meses. Se evaluó la concordancia interobservador para la clasificación de Salter en tres ortopedistas infantiles. Resultados Se evaluaron 20 caderas en 16 pacientes a los que se realizo reducción abierta de luxación típica de cadera por vía interna. El 40 % de las caderas presentaron NAV, el 75% de estas caderas presentan NAV tipo I según la clasificación de Kalamchi. El índice Kappa para la clasificación de Salter en tres ortopedistas infantiles fue 0.6. Discusión El abordaje por vía interna para la reducción de luxación de cadera típica en niños menores de 18 meses es una alternativa más para el manejo de estos pacientes, que puede producir NAV en la cadera, pero esta NAV es tipo I de Kalamchi en la mayoría de casos. La reproducibilidad de la radiografía para la evaluación de NAV, realizada por personas expertas es buena, medida con índice kappa de 0.6.

Coloraciones histológicas vs microscopia electrónica de transmision para detección de Biopeliculas en pacientes con Rinosinusitis Crónica en el Hospital Universitario de la Samaritana en el año 2011

Objetivo: Determinar la concordancia entre microscopia de luz vs microscopia electrónica de transmisión para la detección de Biopeliculas en pacientes con Rinosinusitis Crónica Diseño: Estudio de concordancia. Materiales y Métodos: Analizamos 34 muestras de pacientes llevados a Cirugía Endoscópica Funcional por Rinosinusitis Crónica. Fueron procesadas para valoración mediante microscopia de luz usando Hematoxilina-Eosina, Gram, Acido Peryódico de Schiff, Giemsa y Microscopia Electrónica de Transmisión (MET). Resultados: No se identificaron Biopelícula en ninguna de las muestras analizadas bajo Microscopía Electrónica de Transmisión (MET), estos resultados son concordantes con los resultados obtenidos con las coloraciones histológicas Hematoxilina-Eosina (H-E), Gram, Giemsa y Acido Peryódico de Schiff (PAS), mostrando una concordancia absoluta con test de Kappa para resultados negativos del 100%. Conclusión: Existe una alta concordancia entre los hallazgos observados entre la MET y la Microscopia de luz para los resultados negativos

Propuesta académica para la Universidad del Rosario: Maestría en Administración Deportiva

Consiste en la propuesta de un programa de maestría para la Universidad Del Rosario en Administración Deportiva. Esto teniendo en cuenta el espacio para la profesionalización de este campo en el país

Morbilidad laboral en el sector agrícola en trabajadores afiliados a una administradora de riesgos laborales (ARL) de Colombia, durante el periodo 2011-2012.

Este estudio muestra la prevalencia por enfermedad laboral de un grupo de trabajadores afiliados a una ARL en Colombia. Compara la morbilidad laboral entre dos grupo de trabajadores expuestos y no expuestos al trabajo agrícola y al interior del grupo de trabajadores agrícolas agrupados en las actividades de corte de caña, cultivo de banano y flores. Se realizó un estudio descriptivo de tipo transversal durante el periodo 2011-2012, mediante la revisión de una base de datos de morbilidad laboral. Se realizó un análisis uni-variado y Bi-variado y se comparó la morbilidad con datos sociodemográficos, grupos de trabajadores agrícolas y no agrícolas, y actividad productiva del sector agrícola. Se revisaron 3129 diagnósticos de enfermedad profesional durante el periodo de estudio, 433 diagnósticos fueron trabajadores agrícolas y 2696 pertenecieron a otros grupos de trabajadores. Los desórdenes Osteomusculares fueron los diagnósticos más prevalentes en el grupo Agro 92% y No Agro 86% y en las actividades de corte de caña, cultivo de banano y flores. Entre el grupo Agrícola y no agrícola se encontraron diferencias significativas en los siguientes diagnósticos: Síndrome del túnel del carpo, Síndrome de manguito rotador, Otras sinovitis y tenosinovitis, Lumbago no Especificado, Hipoacusia Neurosensorial Bilateral y epicondilitis lateral; de igual manera se encontraron diferencias entre las actividades de corte de caña y cultivo de banano y flores en los diagnósticos de: Epicondilitis, Sinovitis, Síndrome del túnel del Carpo y Trastorno lumbar. El factor de riesgo más prevalente en el grupo agrícola fue el Ergonómico con el 92.8% de los casos

Factores relacionados con el manejo quirúrgico de estrechez de la unión pieloureteral en niños

Objetivo: Describir los factores relacionados con la toma de decisión de manejo quirúrgico en pacientes con hidronefrosis secundaria a estrechez de la unión pieloureteral en el servicio de Urología Pediátrica de una institución de IV nivel. Materiales y Métodos: Se realizó un estudio descriptivo retrospectivo. Se seleccionaron por conveniencia a 100 pacientes con diagnóstico antenatal de hidronefrosis, 37 fueron llevados a manejo quirúrgico por estrechez de la unión pieloureteral (EUPU) entre los años 2009 y 2012. Se evaluaron los factores que llevaron a la toma| de esta decisión. Resultados: Los pacientes con diagnóstico postnatal de EUPU representaron el 37% de la población, la indicación de manejo quirúrgico en 13 pacientes (35,1%) fue dilatación caliceal (SFU 3), en 21 pacientes (56,8%) de deterioro de la función renal y en los restantes (8,1%) infección urinaria recurrente. Se encontró una progresión de 30% en la severidad de la dilatación en el periodo postnatal, habían 9 pacientes (24% de la muestra) SFU de 3 y 4 en el periodo prenatal y 20 (54%) en el periodo postnatal que fueron llevados a manejo quirúrgico. De los pacientes que disponíamos de datos precisos de valores de variación porcentual de gammagrafía 16% de la muestra, se encontró que había una variación del 50% en deterioro de la función renal. Conclusión: En el grupo de pacientes colombianos de la consulta externa del servicio de urología pediátrica estudiado se encontró que la decisión de manejo quirúrgico en pacientes con EUPU, está en concordancia con lo encontrado en la literatura mundial, siendo estos la presencia de dilatación caliceal deterioro de la función renal en gammagrafía DMSA.