Photoemission optogalvanic effect studies in N2, NO2 and Ar discharges under pulsed laser excitation

A two-photon induced photoemission optogalvanic effect which brings about a change in the discharge voltage when a pulsed dye laser beam is focused on a tungsten electrode has been described. The experiment is performed with N2, NO2 and Ar discharges. The magnitude of the signal voltage is studied as a function of laser energy and discharge current. The effective quantum efficiency in the discharge is found to be larger than that in the vacuum condition.

Photoemission optogalvanic effect studies in N2, NO2 and Ar discharges under pulsed laser excitation

A two-photon induced photoemission optogalvanic effect which brings about a change in the discharge voltage when a pulsed dye laser beam is focused on a tungsten electrode has been described. The experiment is performed with N2, NO2 and Ar discharges. The magnitude of the signal voltage is studied as a function of laser energy and discharge current. The effective quantum efficiency in the discharge is found to be larger than that in the vacuum condition.

Photoemission optogalvanic studies with copper as target electrode

Photoemission optogalvanaic (POG) effect has been observed by irradiating copper target electrode, in a nitrogen discharge cell using 1.06 μm and frequency doubled 532 nm Nd:YAG laser pulse. Measurement of the nature of the variation of POG signal strength with 532 nm laser fluence confirms the two photon induced photoelectric emission from copper. However, using 1.06 μm laser pulses thermally assisted photoemission is observed.

Nonlinear optical characteristics of nanocomposites of ZnO–TiO2–SiO2

In this article we present the nonlinear optical properties of ZnO–TiO2–SiO2 nanocomposites prepared by colloidal chemical synthesis. Nonlinear optical response of these samples is studied using nanosecond laser pulses at an off-resonance wavelength. The nonlinearity of the silica colloid is low and its nonlinear response can be improved by making composites with ZnO and TiO2. These nanocomposites show self-defocusing nonlinearity and good nonlinear absorption behaviour. The nonlinear refractive index and the nonlinear absorption increases with increasing ZnO volume fraction. The observed nonlinear absorption is explained by two photon absorption followed by weak free carrier absorption and nonlinear scattering. ZnO–TiO2–SiO2 is a potential nanocomposite material for the development of nonlinear optical devices with a relatively small limiting threshold.

Spectral and nonlinear optical characteristics of nanocomposites of ZnO–Ag

In this Letter we present the spectral and nonlinear optical properties of ZnO–Ag nanocomposites prepared by colloidal chemical synthesis. Obvious enhancement of ultraviolet (UV) emission of the samples is observed and the strongest UV emission is over three times than that of pure ZnO. These nanocomposites show self-defocusing nonlinearity and good nonlinear absorption behaviour which increases with increasing Ag volume fraction. The observed nonlinear absorption is explained through two photon absorption followed by free carrier absorption. ZnO–Ag is a potential nanocomposite material for the UV light emission and for the development of nonlinear optical devices with a relatively small limiting threshold.

Effect of self assembly on the nonlinear optical characteristics of ZnO thin films

In the present work, we report the third order nonlinear optical properties of ZnO thin films deposited using self assembly, sol gel process as well as pulsed laser ablation by z scan technique. ZnO thin films clearly exhibit a negative nonlinear index of refraction at 532 nm and the observed nonlinear refraction is attributed to two photon absorption followed by free carrier absorption. Although the absolute nonlinear values for these films are comparable, there is a change in the sign of the absorptive nonlinearity of the films. The films developed by dip coating and pulsed laser ablation exhibit reverse saturable absorption whereas the self assembled film exhibits saturable absorption. These different nonlinear characteristics in the self assembled films can be mainly attributed to the saturation of linear absorption of the ZnO defect states.

Linear and nonlinear optical characteristics of ZnO-SiO2 nanocomposites.

We present the spectral and nonlinear optical properties of ZnO-SiO2 nanocomposites prepared by colloidal chemical synthesis. Obvious enhancement of ultraviolet (UV) emission of the samples is observed, and the strongest UV emission of a typical ZnO-SiO2 nanocomposite is over three times stronger than that of pure ZnO. The nonlinearity of the silica colloid is low, and its nonlinear response can be improved by making composites with ZnO. These nanocomposites show self-defocusing nonlinearity and good nonlinear absorption behavior. The observed nonlinear absorption is explained through two photon absorption followed by weak free carrier absorption and nonlinear scattering. The nonlinear refractive index and the nonlinear absorption increase with increasing ZnO volume fraction and can be attributed to the enhancement of exciton oscillator strength. ZnO-SiO2 is a potential nanocomposite material for the UV light emission and for the development of nonlinear optical devices with a relatively small limiting threshold.

Enhanced luminescence and nonlinear optical properties of nanocomposites of ZnO–Cu

In this article, we present the spectral and nonlinear optical properties of ZnOCu nanocomposites prepared by colloidal chemical synthesis. The emission consisted of two peaks. The 385-nm ultraviolet (UV) peak is attributed to ZnO and the 550-nm visible peak is attributed to Cu nanocolloids. Obvious enhancement of UV and visible emission of the samples is observed and the strongest UV emission of a typical ZnOCu nanocomposite is over three times stronger than that of pure ZnO. Cu acts as a sensitizer and the enhancement of UV emission are caused by excitons formed at the interface between Cu and ZnO. As the volume fraction of Cu increases beyond a particular value, the intensity of the UV peak decreases while the intensity of the visible peak increases, and the strongest visible emission of a typical ZnOCu nanocomposite is over ten times stronger than that of pure Cu. The emission mechanism is discussed. Nonlinear optical response of these samples is studied using nanosecond laser pulses from a tunable laser in the wavelength range of 450650 nm, which includes the surface plasmon absorption (SPA) band. The nonlinear response is wavelength dependent and switching from reverse saturable absorption (RSA) to saturable absorption (SA) has been observed for Cu nanocolloids as the excitation wavelength changes from the low absorption window region to higher absorption regime near the SPA band. However, ZnO colloids and ZnOCu nanocomposites exhibit induced absorption at this wavelength. Such a changeover in the sign of the nonlinearity of ZnOCu nanocomposites, with respect to Cu nanocolloids, is related to the interplay of plasmon band bleach and optical limiting mechanisms. The SA again changes back to RSA when we move over to the infrared region. The ZnOCu nanocomposites show self-defocusing nonlinearity and good nonlinear absorption behavior. The nonlinear refractive index and the nonlinear absorption increases with increasing Cu volume fraction at 532 nm. The observed nonlinear absorption is explained through two-photon absorption followed by weak free-carrier absorption and interband absorption mechanisms. This study is important in identifying the spectral range and composition over which the nonlinear material acts as a RSA-based optical limiter. ZnOCu is a potential nanocomposite material for the light emission and for the development of nonlinear optical devices with a relatively small limiting threshold.

Nonlinear and magneto-optical transmission studies on magnetic nanofluids of non-interacting metallic nickel nanoparticles

Oxide free stable metallic nanofluids have the potential for various applications such as in thermal management and inkjet printing apart from being a candidate system for fundamental studies. A stable suspension of nickel nanoparticles of ∼5 nm size has been realized by a modified two-step synthesis route. Structural characterization by x-ray diffraction and transmission electron microscopy shows that the nanoparticles are metallic and are phase pure. The nanoparticles exhibited superparamagnetic properties. The magneto-optical transmission properties of the nickel nanofluid (Ni-F) were investigated by linear optical dichroism measurements. The magnetic field dependent light transmission studies exhibited a polarization dependent optical absorption, known as optical dichroism, indicating that the nanoparticles suspended in the fluid are non-interacting and superparamagnetic in nature. The nonlinear optical limiting properties of Ni-F under high input optical fluence were then analyzed by an open aperture z-scan technique. The Ni-F exhibits a saturable absorption at moderate laser intensities while effective two-photon absorption is evident at higher intensities. The Ni-F appears to be a unique material for various optical devices such as field modulated gratings and optical switches which can be controlled by an external magnetic field

Design and Synthesis of Donor-Acceptor Low Band Gap Copolymers for Photoconductive and Non-linear Optical Applications

The main focus of the present study was to develop ideal low band gap D-A copolymers for photoconducting and non-linear optical applications. This chapter summarizes the overall research work done. Designed copolymers were synthesized via direct arylation or Suzuki coupling reactions. Copolymers were characterized by theoretical and experimental methods. The suitability of these copolymers in photoconducting and optical limiting devices has been investigated.The results suggest that the copolymers investigated in the present study have a good non-linear optical response and are comparable to or even better than the D-A copolymers reported in the literature and hence could be chosen as ideal candidates with potential applications for non-linear optics. The results also show that the structures of the polymers have great impact on NLO properties. Copolymers studied here exhibits good optical limiting property at 532 nm wavelength due to two-photon absorption (TPA) process. The results revealed that the two copolymers, (P(EDOT-BTSe) and P(PH-TZ)) exhibited strong two-photon absorption and superior optical power limiting properties, which are much better than that of others.

Volume isotope shifts in low lying transitions of Au I

Electronic factors in the volume isotope shift have been calculated in an ab initio way with the relativistic Dirac-Fock method for a number of different optical single/and two-photon transitions in Au I. The agreement with a semi-empirical method is within 10% for the resonance transition. For this one and a few other transitions the effect of core excitation has been analyzed with the Multi-configuration Dirac-Fock method as well, and it was found to reduce the electronic factor in the order of 5 %.

Aplicación de los modelos de mejoramiento de procesos y de tiempos y movimientos en las áreas de urgencias y hospitalización de la Clínica Belén de Fusagasugá para garantizar la prestación del servicio en salud con calidad

En este proyecto a través de la aplicación de modelos de mejoramiento como la gestión de procesos y tiempos y movimientos se solucionaron problemas internos relacionados con la oportunidad, eficacia y eficiencia en una institución prestadora de salud de nivel II de complejidad, siendo aplicables en cualquier organización del sector salud cuya razón de ser sea atender pacientes, dándole a la organización la capacidad de responder adecuadamente a las necesidades del cliente en términos de tiempo sin comprometer la calidad del servicio prestado. Esto se desarrolló en la clínica Belén de Fusagasugá en el periodo comprendido entre septiembre de 2010 y septiembre de 2011, se utilizo la metodología de tiempos y movimientos, determinando los desequilibrios entre la capacidad instalada y el volumen de pacientes que ingresaron , a través de tiempos de atención socialmente aceptados, la capacidad instalada requerida para evitar retrasos en los horarios de alto volumen de consulta los cuales producen insatisfacción del usuario. Lo anterior se aplicó en dos procesos institucionales: urgencias y hospitalización ya que son las unidades funcionales donde los tiempos de espera son mayores a los socialmente aceptados produciendo importantes fallas de calidad, se establecieron indicadores de alerta que permitieron detectar en tiempo real las demoras en la atención, para asi realizar ajustes inmediatos a través de acciones de contingencia que se implementan en la institución, a partir de la desviación de los indicadores de alerta para cada uno de los procedimientos, determinando la existencia de cuellos de botella, gracias a la aplicación de la metodología de gestión de procesos y la que permitieron que el factor volumen de pacientes no afecte los tiempos de prestación de los servicios garantizando la satisfacción de los clientes.

El poder electrónico para la gente: un desafío para la democracia contemporánea

Los adelantos tecnológicos han transformado prácticamente todos los aspectos de nuestras vidas. En la última década, la producción de conocimiento se ha dado casi de manera exponencial, y ello, sin lugar a dudas, también tiene implicaciones en la forma como nos relacionamos entre nosotros como ciudadanos y con el Estado. El presente artículo hace una reflexión acerca de los desafíos que el sistema democrático actual tiene para lograr una autodeterminación de los grupos e individuos y la inclusión efectiva en el sistema. Para tal fin, se deben encaminar dos grandes procesos: en el primero, el objetivo debe ser el empoderamiento de la gente con respecto al uso creativo de todas aquellas herramientas electrónicas que el mundo ofrece y el segundo tiene que ver con la construcción que el Estado debe realizar para comunicarse con los ciudadanos en un nuevo contexto de ubicuidad social. ---Electronic power to the people: a challenge to contemporary democracyTechnological advances have transformed virtually every aspect of our lives. In the last decade, knowledge production has grown almost exponentially, and this, undoubtedly has implications in how we relate to each of us as citizens and the state. This article makes a reflection on the challenges that the current democratic system is to achieve self-determination of groups and individuals and the effective inclusion into the system. To that end, must be directed at two major processes, the first aimed at empowering people in all those electronic tools that the world offers us to make it a creative use, and the second has to do with the ability of the State have to build to communicate with citizens in a new context of social ubiquity.Key words: electronic power, Internet, democracy, inclusion, self determination, State, government, education, rights.---O poder eletrônico para gente: Um desafio para a democracia contemporâneaOs avanços tecnológicos têm transformado praticamente todos os aspectos de nossas vidas. Na última década, a produção de conhecimento se tem dado quase de maneira exponencial, e isso, certamente, também tem implicações na forma como nos relacionamos entre nós como cidadãos e com o Estado. O presente artigo faz uma reflexão acerca dos desafios que o sistema democrático atual tem para lograr uma autodeterminação dos grupos e indivíduos e a inclusão efetiva no sistema. Para tal fim, se devem encaminhar dois grandes processos: no primeiro, o objetivo deve ser o empoderamento das pessoas em relação ao uso criativo de todas aquelas ferramentas eletrônicas que o mundo oferece e o segundo tem que ver com a construção que o Estado deve realizar para se comunicar com os cidadãos em um contexto de ubiqüidade social.Palavras chave: Poder eletrônico, democracia, inclusão, autodeterminação, Estado, governo, educação, direitos.

The effects of information and communication technologies on the banking sector and the payments system

This dissertation studies the effects of Information and Communication Technologies (ICT) on the banking sector and the payments system. It provides insight into how technology-induced changes occur, by exploring both the nature and scope of main technology innovations and evidencing their economic implications for banks and payment systems. Some parts in the dissertation are descriptive. They summarise the main technological developments in the field of finance and link them to economic policies. These parts are complemented with sections of the study that focus on assessing the extent of technology application to banking and payment activities. Finally, it includes also some work which borrows from the economic literature on banking. The need for an interdisciplinary approach arises from the complexity of the topic and the rapid path of change to which it is subject. The first chapter provides an overview of the influence of developments in ICT on the evolution of financial services and international capital flows. We include main indicators and discuss innovation in the financial sector, exchange rates and international capital flows. The chapter concludes with impact analysis and policy options regarding the international financial architecture, some monetary policy issues and the role of international institutions. The second chapter is a technology assessment study that focuses on the relationship between technology and money. The application of technology to payments systems is transforming the way we use money and, in some instances, is blurring the definition of what constitutes money. This chapter surveys the developments in electronic forms of payment and their relationship to the banking system. It also analyses the challenges posed by electronic money for regulators and policy makers, and in particular the opportunities created by two simultaneous processes: the Economic and Monetary Union and the increasing use of electronic payment instruments. The third chapter deals with the implications of developments in ICT on relationship banking. The financial intermediation literature explains relationship banking as a type of financial intermediation characterised by proprietary information and multiple interactions with customers. This form of banking is important for the financing of small and medium-sized enterprises. We discuss the effects of ICT on the banking sector as a whole and then apply these developments to the case of relationship banking. The fourth chapter is an empirical study of the effects of technology on the banking business, using a sample of data from the Spanish banking industry. The design of the study is based on some of the events described in the previous chapters, and also draws from the economic literature on banking. The study shows that developments in information management have differential effects on wholesale and retail banking activities. Finally, the last chapter is a technology assessment study on electronic payments systems in Spain and the European Union. It contains an analysis of existing payment systems and ongoing or planned initiatives in Spain. It forms part of a broader project comprising a series of country-specific analyses covering ten European countries. The main issues raised across the countries serve as the starting point to discuss implications of the development of electronic money for regulation and policies, and in particular, for monetary-policy making.

Modificaciones tecnológicas para mejorar la seguridad y calidad del jamón curado

Se introdujeron varias modificaciones tecnológicas en la elaboración habitual del jamón curado español de cerdo blanco para mejorar su seguridad y calidad, así como para investigar la contribución relativa de los diversos procesos implicados en la calidad sensorial. Las modificaciones introducidas en cada uno de 3 experimentos (a, b, c) fueron: a) inoculación de un cultivo iniciador (CI) en la superficie del producto y el envasado del jamón al vacío durante la etapa de reposo (EV); b) aplicación de una atmósfera modificada con un contenido reducido de oxígeno (AMCRO) (durante la totalidad o la última parte del procesado) en dos procesos que diferían en las humedades relativas aplicadas; c) realización de un estufaje de 4 días a 35ºC y la aplicación repetida de pequeñas cantidades de grasa dorsal líquida sobre la superficie del jamón. En cada experimento, se siguió un diseño experimental de bloques incompletos para bloquear y evaluar el efecto de la materia prima en cada parámetro. La aplicación del CI evitó el crecimiento superficial de hongos, pero modificó el flavor del producto, dando lugar a la aparición de flavores impropios del jamón tradicional, al aumento de la incidencia de la coquera y a la reducción de la intensidad de notas características del mismo como el flavor añejo. Estos efectos fueron debidos a la acción directa del CI pero probablemente también a los cambios que provocó en la superficie del jamón, como la atenuación del "sudado" del jamón. El EV trajo consigo una reducción del crecimiento superficial de mohos; un mayor gradiente de humedad entre el interior y el exterior del jamón; una disminución de la pérdida de peso; un aumento del nitrógeno no proteico y cambios negativos en la textura, aspecto y flavor, como el aumento de la intensidad del velo blanco y del flavor a pienso, el aumento de la incidencia de la coquera y la atenuación del flavor añejo. Estos efectos fueron consecuencia del mayor contenido de humedad a que dio lugar dicha modificación tecnológica, de la potenciación de los efectos negativos del uso del CI, así como a los cambios que provocó en la superficie del jamón. El uso de una ACRO durante todo el proceso provocó un aumento del nitrógeno no proteico, una disminución de la concentración de óxidos de colesterol, un aumento de la intensidad del velo blanco y, en combinación con el uso de humedades relativas bajas, causó una disminución del crecimiento bacteriano y evitó el crecimiento de hongos, levaduras y ácaros en el interior y exterior del jamón y el desarrollo de la coquera. Asímismo, dio lugar a una drástica reducción de la intensidad del flavor del jamón debido a la disminución de la intensidad de la oxidación lipídica. Cuando esta ACRO se aplicó únicamente al final del proceso, se consiguió la eliminación de las formas móviles de los ácaros y la disminución de la intensidad de la coquera y el producto resultante poseía un flavor algo más intenso que aquél sometido a una ACRO durante todo el proceso. El aumento de la temperatura de 25-27 ºC a 35 ºC durante 4 días no tuvo ningún efecto sobre los parámetros estudiados. La aplicación de la grasa líquida en la superficie del jamón evitó el secado excesivo en superficie, previno el desarrollo de la coquera y causó un aumento de la intensidad del flavor añejo y una reducción de la incidencia de notas negativas como el tostado, hechos que indican que la liberación de grasa líquida en el jamón ("sudado") constituye un fenómeno determinante en su calidad sensorial. La materia prima fue el factor que afectó a un mayor número de parámetros.