Effect of AB(5) alloy on Ti0.10Zr0.15V0.35Cr0.10Ni0.30 hydrogen storage alloy

The structure and electrochemical characteristics of melted composite Ti0.10Zr0.15V0.35Cr0.10Ni0.30 + x% LaNi4Al0.4Mn0.3Co0.3 (x = 0, 1, 5) hydrogen storage alloys have been investigated systematically. XRD shows that though the main phase of the matrix alloy remains unchanged after LaNi4Al0.4Mn0.3Co0.3 alloy is added, a new specimen is formed. The amount of the new specimen increases with increasing x. SEM-EDS analysis indicates that the V-based solid solution phase is mainly composed of V, Cr and Ni; C14 Laves phase is mainly composed of Ni, Zr and V; the new specimen containing La is mainly composed of Zr, V and Ni. The electrochemical measurements suggest that the activation performance, the low temperature discharge ability, the high rate discharge ability and the cyclic stability of composite alloy electrodes increase greatly with the growth of x.

Synthesis of REF3 (RE = Nd, Tb) nanoparticles via a solvent extraction route

NdF3 and TbF3 nanoparticles were successfully synthesized via a solvent extraction route using Cynex923 (R3P=O). X-ray diffraction (XRD) study showed that pure hexagonal phase NdF3 and pure orthorhombic phase TbF3 could be obtained under the current synthetic conditions. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) observations indicated that as-obtained NdF3 nanoplates have a diameter of 50-80 nm and thickness of 10-20 nm and TbF3 products have sphere morphologies with diameter from 70 to 170 nm. The driving force for the growth of NdF3 nanoplates could be attributed to the hexagonal crystal structure. The luminescence properties of NdF3 and TbF3 nanoparticles were investigated, which indicated that NdF3 nanoparticles showed typical emission at 888,1064, and 1328 nm and TbF3 nanoparticles showed characteristic emission of Tb3+ (f-f).

Nanocrystalline La2Mo2O9 and its characterization

In this work, both the thermal expansion and electrical conductivity of nanocrystalline La2Mo2O9 were studied. The nanocrystalline powder of La2Mo2O9 was obtained by sol-gel method, and with the help of SHP (superhigh pressure) up to 4.5 x 10(4) atm at 700 degrees C for a short time, and the nanocrystalline powder was densified without obvious particle size growth. The electrical conductivity of nanocrystalline La2Mo2O9 was one order of magnitude lower than that of the microcrystalline sample at the same temperature. Owing to the phase transition, the microcrystalline La2MO2O9 has an abrupt increase of thermal expansion with a peak value of 48 x 10(-6) K-1 at 556 degrees C. For the nanocrystalline material, the peak value increases to 112 x 10(-6) K-1 at 520 degrees C. On the other hand, above 600 degrees C the significant growth of particle size of the nanocrystalline La2Mo2O9 was observed, accompanying by a tremendous increase of thermal expansion with a peak value of 1565 x 10(-6) K-1 at 620 degrees C. The electrical conductivity of La1.6Nd0.4Mo2O9 at 800 degrees C is 0.14 S center dot cm(-1) which is about one third higher than that of La2Mo2O9.

Luminescent properties of Gd2Ti2O7 : Eu3+ phosphor films prepared by sol-gel process

Gd2Ti2O7: Eu3+ thin film phosphors were fabricated by a sol-gel process. X-ray diffraction (XRD), atomic force microscopy (AFM) and photoluminescence (PL) spectra as well as lifetimes were used to characterize the resulting films. The results of XRD indicated that the films began to crystallize at 800 degreesC and the crystallinity increased with the elevation of annealing temperatures. Uniform and crack free phosphor films were obtained, which mainly consisted of grains with an average size of 70 nm. The doped Eu3+ showed orange-red emission in crystalline Gd2Ti2O7 phosphor films due to an energy transfer from Gd2Ti2O7 host to them. Both the lifetimes and PL intensity of the Eu3+ increased with increasing the annealing temperature from 800 to 1000 degreesC, and the optimum concentrations for Eu3+ were determined to be 9 at.%. of Gd3+ in Gd2Ti2O7 film host.

Isothermal crystallization of PP-g-GMA copolymer

The overall isothermal crystallization kinetics for neat polypropylene and grafted polypropylene systems were investigated. The rate constants were corrected assuming the heterogeneous nucleation and three dimensional growth of polypropylene spherulites. A semiempirical equation for the radial growth rate of polypropylene spherulites was developed as a function of temperature, and was used to determine the number of effective nuclei of different temperatures. The number of nuclei in grafted samples was estimated to be 10(2)-10(3) times larger than that of neat polypropylene. (C) 1997 John Wiley & Sons, Inc.

TETRAKIS(MU-DL-ALANINE-O-O')OCTA-AGUADIERBIUM(III) HEXAPERCHLORATE

The structure of the title compound, [Er-2(C3H7NO2)(4)- (H2O)(8)](ClO4)(6), consists of dimeric [Er-2(DL-alanine)(4)-(H2O)(8)](6+) cations and perchlorate anions. The four alanine molecules act as bridging ligands linking two Er3+ ions through their carboxyl O atoms. Each Er3+ ion is also coordinated by four water molecules to complete eightfold coordination in a square antiprism fashion. The perchlorate anions and the methyl groups of the alanine ligands are disordered.

Electrochemical, SEM/EDS and quantum chemical study of phthalocyanines as corrosion inhibitors for mild steel in 1 mol/l HCl

The inhibition effect of metal-free phthalocyanine (H2Pc), copper phthalocyanine (CuPc) and copper phthalocyanine tetrasulfuric tetrasodium salt (CuPc center dot S(4)center dot Na-4) on mild steel in I mol/l HCl in the concentration range of 1.0 X 10(-5) to 1.0 X 10(-3) mol/l was investigated by electrochemical test, scanning electron microscope with energy dispersive spectrometer (SEM/EDS) and quantum chemical method. The potentiodynamic polarization curves of mild steel in hydrochloric acid containing these compounds showed both cathodic and anodic processes of steel corrosion were suppressed, and the Nyquist plots of impedance expressed mainly as a capacitive loop with different compounds and concentrations. For all these phthalocyanines, the inhibition efficiency increased with the increase in inhibitor concentration, while the inhibition efficiencies for these three phthalocyanines with the same concentration decreased in the order Of CuPc center dot S(4)center dot Na-4 > CuPc > H2Pc according to the electrochemical measurement results. The SEM/EDS analysis indicated that there are more lightly corroded and oxidative steel surface for the specimens after immersion in acid solution containing 1.0 x 10(-3) mol/l phthalocyanines than that in blank. The quantum chemical calculation results showed that the inhibition efficiency of these phthalocyanines increased with decrease in molecule's LUMO energy, which was different from the micro-cyclic compounds. (c) 2005 Elsevier B.V. All rights reserved.

远程数据库访问系统客户／服务器体系结构模型的设计与实现

远程数据库访问（ＲＤＡ）是ＯＳＩ应用层一个特别应用服务元素（ＳＡＳＥ），是数据库基础标准，是构造分布数据库开放式体系结构的基础．本文遵照国际标准ＲＤＡ模型、服务、协议，研究并给出实现ＲＤＡ客户／服务器体系结构模型、方法与系统原型。

具有冗余自由度的异结构主从操作手的运动学控制

具有冗余自由度的异结构主从操作手的运动学控制邱继红（中科院沈阳自动化所９０届硕士生）具有冗余自由度的异结构主从操作手是一种新型结构型式的遥控操作手。本文对由一只通用型主手（６－ＤＯＦ）和一只具有冗余自由度（７－ＤＯＦ）的从手组成的异结构操作手系统的运..。

北天山新生代构造演化与古环境演变

The Tianshan Mountains is located about 1000-2000 km north of the India-Asia suture and is the most outstanding topography in central Asia, with transmeridional length of nearly 2500 km, north-southern wideness of ~ 300-500 km, peaks exceeding 7000 m above sea level (asl.), and average altitude of over 4000 m asl. Much of the modern relief of the Tianshan Range is a result of contraction driven by the collision of the India subcontinent with the southern margin of Asia, which began in early Tertiary and continues today. Understanding where, when and how the deformation of the Tianshan Mountains occurred is essential to decipher the mechanism of intracontinental tectonics, the process of foreland basin evolution and mountain building, and the history of climate change in central Asia. In order to better constrain the Cenozoic building history of the Tianshan Mountains and the climate change in the southern margin of the Junggar Basin, we carried out multiple studies of magnetostratigraphy, sedimentology, and stable isotopes of paleosol carbonate at the Jingou River section, which is located at the Huoerguosi anticline, the westernest one of the second folds and thrust faults zone in the northern piedmont of the Tianshan Mountains. The Jingou River section with a thickness of about 4160 m is continuous in deposits according to the observed gradual change in sedimentary environments and can be divided into five formations: Anjihaihe, Shawan, Taxihe, Dushanzi and Xiyu in upward sequence. Characteristic remamences were isolated by progressive thermal demagnetization, generally between 300 and 680℃. A total of 1133 out of 1607 samples yielded well-defined ChRMs and were used to establish the magnetostratigraphic column of a 3270-m-thick section from the exposed base of the Anjihaihe Formation to the middle of the Xiyu Formation. Two vertebrate fossil sites and a good correlation with the CK95 geomagnetic polarity time scale suggest that the section was deposited from ~30.5 to ~4.6 Ma and the age of the top of the Xiyu formation is ~2.6 Ma based on an extrapolation of the sedimentation rates. A plot of magnetostratigraphic age vs. height at the Jingou River section shows that significant increases in sedimentation rates as well as notable changes in depositional environments occurred at ~26-22.5 Ma, ~13-11 Ma and ~7 Ma, which represent the initial uplift of the Tianshan Mountains and two subsequent rapid uplift events. In addition, changes in sedimentation rates display characteristic alternations between increases and decreases, which probably indicate that the uplift of the Tianshan Mountains was episodic. We discussed the history of C4 biomass and climatic conditions in the southern margin of the Junggur Basin using the stable carbon and oxygen isotope composition of paleosol carbonates from the Jingou River section during ~17.5-6.5 Ma. The δ13C values indicate that the proportion of C4 biomass was uniform and moderate (15-20 %) during the interval of ~17.5-6.5 Ma. We proposed three hypotheses for this pattern of C4 biomass: (1) counteraction of two opposed factors (global cooling since ~15 Ma and thereafter increased dry and seasonality in central Asia) controlling the growth of C4 grasses, (2) variability in abundance of C3 grasses relative to C3 trees and shrubs if vegetation had ever changed in ecosystems, and (3) the higher latitude of the studied region. The δ18O values show a stepwise negative trend since ~13 Ma which may be attributed to three factors: (1) the temperature decreasing gradually after the middle Miocene (~15 Ma), (2) the increasing contribution of the moistures carried by the polar air masses from the Arctic Ocean to precipitation, and (3) the gradual retreat westward and disappearance of the Paratethys Ocean. Among them, which one played a more important role will need further study of the paleoclimate in central Asia.

喀斯特森林雨水的地球化学特征——以贵州茂兰国家级自然保护区为例

贵州茂兰喀斯特原始森林地区25个雨水样品的化学组成研究表明，该区雨水的pH值为4．4～7．2，平均为5．1。雨水样品富NH4^＋、Ca^2＋和SO4^2-、C1^-。NH4^＋是最主要的阳离子，平均值为56．8／μmol／L，占阳离子组成的26％～74％，Ca^2＋次之，平均值为14．8μmol／L，NHg和Ca^2＋之和占了阳离子组成的71％～94％，SO4^2-是最主要的阴离子，平均值为39．2μmol／L，占了阴离子组成的69％～91％，CI一次之，平均值为9．5μmol／L。SO4^2-和C1-占了阴离子组成的71％～96％。与中国其他地区的雨水样品相比，茂兰地区雨水离子含量要低1～2个数量级；物质来源分析表明茂兰地区雨水中溶质主要来源于自然过程的输入，人为活动输入可以忽略不计.

基于RS和GIS的喀斯特石漠化驱动机制分析——以广西都安瑶族自治县为例

喀斯特石漠化( Karst Rocky Desertification , KRD) 是指喀斯特区地表出现类似荒漠景观的土地退化过程。采用RS 和GIS 技术,对都安喀斯特石漠化程度分级状况与驱动因素进行全面调查,建立全县1∶1 0 万喀斯特石漠化数据库。利用相关分析、因子分析和回归分析等方法,分析导致石漠化的影响因子,即喀斯特石漠化的重要驱动力,建立了喀斯特石漠化动力指数模型,算出了各因子对石漠化的贡献值,指出石漠化产生的主导原因是不合理的人为活动。所建的动力指数模型输出结果与遥感调查有相对一致性,表明石漠化动力指数能较好地反映该地区石漠化过程,可为喀斯特石漠化治理提供理论依据。

Modification of nitrogen remobilisation, grain fill and leaf senescence in maize (Zea mays L.) by transposon insertional mutagenensis in a protease gene

Donnison, I. S., Gay, A. P., Thomas, Howard, Edwards, K. J., Edwards, D., James, C. L., Thomas, A. M., Ougham, H. J. (2007). Modification of nitrogen remobilization, grain fill and leaf senescence in maize (Zea mays) by transposon insertional mutagenensis in a protease gene. New Phytologist, 173 (3), 481-494. Sponsorship: BBSRC RAE2008

Equational Axiomization of Bicoercibility for Polymorphic Types

Two polymorphic types σ and τ are said to be bicoercible if there is a coercion from σ to τ and conversely. We give a complete equational axiomatization of bicoercible types and prove that the relation of bicoercibility is decidable.

Generating Representative Web Workloads for Network and Server Performance Evaluation

One role for workload generation is as a means for understanding how servers and networks respond to variation in load. This enables management and capacity planning based on current and projected usage. This paper applies a number of observations of Web server usage to create a realistic Web workload generation tool which mimics a set of real users accessing a server. The tool, called Surge (Scalable URL Reference Generator) generates references matching empirical measurements of 1) server file size distribution; 2) request size distribution; 3) relative file popularity; 4) embedded file references; 5) temporal locality of reference; and 6) idle periods of individual users. This paper reviews the essential elements required in the generation of a representative Web workload. It also addresses the technical challenges to satisfying this large set of simultaneous constraints on the properties of the reference stream, the solutions we adopted, and their associated accuracy. Finally, we present evidence that Surge exercises servers in a manner significantly different from other Web server benchmarks.