Efeito da adição de cargas minerais leves na resistência mecânica de grautes para cimentação de poços offshore

The preparation of cement slurries for offshore well cementing involves mixing all solid components to be added to the mixing water on the platform. The aim of this work was to study the formulation of pre-prepared dry mixtures, or grouts, for offshore oilwell cementing. The addition of mineral fillers in the strength of lightweight grouts applied for depths down to 400 m under water depths of 500 m was investigated. Lightweight materials and fine aggregates were selected. For the choice of starting materials, a study of the pozzolanic activity of low-cost fillers such as porcelain tile residue, microsilica and diatomaceous earth was carried out by X-ray diffraction and mechanical strength tests. Hardened grouts containing porcelain tile residue and microsilica depicted high strength at early ages. Based on such preliminary investigation, a study of the mechanical strength of grouts with density 1.74 g/cm3 (14.5 lb/gal) cured initially at 27 °C was performed using cement, microsilica, porcelain tile residue and an anti-foaming agent. The results showed that the mixture containing 7% of porcelain tile residue and 7% of microsilica was the one with the highest compressive strength after curing for 24 hours. This composition was chosen to be studied and adapted for offshore conditions based on testes performed at 4 °C. The grout containing cement, 7% of porcelain tile residue, 7% of active silica and admixtures (CaCl2), anti-foaming and dispersant resulted satisfactory rheology and mechanical strength after curing for 24 hours of curing

Changes in physical properties of extruded sour cassava starch and quinoa flour blend snacks

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos da aplicação de herbicidas sobre a eficiência fotoquímica em plantas de soja convencional e geneticamente modificada

Objetivou-se, neste trabalho, avaliar o efeito da aplicação de herbicidas em pós-emergência sobre a eficiência fotoquímica de duas cultivares de soja (M-SOY 7908 RR e M-SOY 8001). O delineamento experimental utilizado foi em blocos ao acaso, com quatro repetições. Os tratamentos constaram da aplicação de herbicidas isolados e em misturas: lactofen, glyphosate, lactofen + chlorimuron-ethyl, chlorimuron-ethyl + imazethapyr, chlorimuron-ethyl + bentazon, glyphosate + imazethapyr, lactofen + chlorimuron-ethyl + imazethapyr e lactofen + chlorimuron-ethyl + imazethapyr/haloxyfop-methyl. Além disso, foram mantidas duas testemunhas sem aplicação de herbicida. As avaliações foram realizadas aos 4; 11; 18; 25 e 32 dias após aplicação dos herbicidas (DAA) no primeiro ano, e aos 6, 14, 21, 28 e 35 DAA, no segundo. A cultivar M-SOY 8001 foi suscetível à aplicação dos herbicidas, principalmente às misturas contendo lactofen + chlorimuron-ethyl e lactofen + chlorimuron-ethyl + imazethapyr + haloxifop-methyl, os quais provocaram redução no rendimento quântico máximo do PSII (Fv/Fm). As duas cultivares apresentaram suscetibilidade aos herbicidas quando tratados com lactofen aplicado isolado e nas misturas lactofen + chlorimuron-ethyl, chlorimuron-ethyl + imazethapyr, lactofen + chlorimuron-ethyl + imazethapyr e lactofen + chlorimuron-ethyl + imazethapyr + haloxifop-methyl com redução nos teores de clorofila, estimados pelo Medidor Portátil de Clorofilas. Os danos foram reversíveis, desaparecendo gradativamente com a idade das plantas.

Resíduos e subprodutos agroindustriais e grãos como substratos para produção do fungo entomapatogênico Lecanicillium lecanii

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo de pré-formulação para dose fixa combinada dos tuberculostáticos rifampicina, isoniazida, pirazinamida e etambutol (4 em 1)

According to the global framework regarding new cases of tuberculosis, Brazil appears at the 18th place. Thus, the Ministry of Health has defined this disease as a priority in the governmental policies. As a consequence, studies concerning treatment and prevention have increased. Fixed-dose combination formulations (FDC) are recognized as beneficial and are recommended by WHO, but they present instability and loss on rifampicin bioavailability. The main purpose of this work was to carry out a pre-formulation study with the schedule 1 tuberculosis treatment drugs: rifampicin, isoniazid, pyrazinamide and ethambutol and pharmaceutical excipients (lactose, cellulose, magnesium stearate and talc), in order to develop an FDC product (150 mg of rifampicin + 75 mg of isoniazid + 400 mg of pyrazinamide + 250 mg of ethambutol). The studies consisted of the determination of particle size and distribution (Ferret s diameter) and shape through optical microscopy, as well as rheological and technological properties (bulk and tapped densities, Hausner Factor, Carr s Index, repose angle and flux rate) and interactions among drugs and drug excipient through thermal analysis (DSC, DTA, TG and your derivate). The results showed that, except isoniazid, the other drugs presented poor rheological properties, determined by the physical characteristics of the particles: small size and rod like particles shape for rifampicin; rectangular shape for pyrazinamide and ethambutol, beyond its low density. The 4 drug mixture also not presented flowability, particularly that one containing drug quantity indicated for the formulation of FDC products. In this mixture, isoniazid, that has the best flowability, was added in a lower concentration. The addition of microcrystalline cellulose, magnesium stearate and talc to the drug mixtures improved flowability properties. In DSC analysis probable interactions among drugs were found, supporting the hypothesis of ethambutol and pyrazinamide catalysis of the rifampicin-isoniazid reaction resulting in 3- formylrifamycin isonicotinyl hydrazone (HYD) as a degradation product. In the mixtures containing lactose Supertab® DSC curves evidenced incompatibility among drugs and excipient. In the DSC curves of mixtures containing cellulose MC101®, magnesium stearate and talc, no alterations were observed comparing to the drug profiles. The TG/DTG of the binary and ternary mixtures curves showed different thermogravimetrics profiles relating that observed to the drug isolated, with the thermal decomposition early supporting the evidences of incompatibilities showed in the DSC and DTA curves

Preparação e carcterização de complexos multicomponentes contendo ciclodextrinas e benznidazol

The benznidazole (BNZ) is the only alternative for Chagas disease treatment in Brazil. This drug has low solubility, which restricts its dissolution rate. Thus, the present work aimed to study the BNZ interactions in binary systems with beta cyclodextrin (β-CD) and hydroxypropyl-beta cyclodextrin (HP-β-CD), in order to increase the apparent aqueous solubility of drug. The influence of seven hydrophilic polymers, triethanolamine (TEA) and 1-methyl-2- pyrrolidone (NMP) in benznidazole apparent aqueous solubility, as well as the formation of inclusion complexes was also investigated. The interactions in solution were predicted and investigated using phase solubility diagram methodology, nuclear magnetic resonance of protons (RMN) and molecular modeling. Complexes were obtained in solid phase by spray drying and physicochemical characterization included the UV-Vis spectrophotometric spectroscopy in the infrared region, scanning electron microscopy, X-ray diffraction and dissolution drug test from the different systems. The increment on apparent aqueous solubility of drug was achieved with a linear type (AL) in presence of both cyclodextrins at different pH values. The hydrophilic polymers and 1-methyl-2-pyrrolidone contributes to the formation of inclusion complexes, while the triethanolamine decreased the complex stability constant (Kc). The log-linear model applied for solubility diagrams revealed that both triethanolamine and 1-methyl-2-pyrrolidone showed an action cosolvent (both solvents) and complexing (1-methyl-2-pyrrolidone). The best results were obtained with complexes involving 1-methyl-2-pyrrolidone and hydroxypropylbeta- cyclodextrin, with an increased of benznidazole solubility in 27.9 and 9.4 times, respectively. The complexes effectiveness was proven by dissolution tests, in which the ternary complexes and physical mixtures involving 1-methyl- 2-pyrrolidone and both cyclodextrins investigated showed better results, showing the potential use as novel pharmaceutical ingredient, that leads to increased benznidazole bioavailability

Avaliação da argila atapulgita para potencial uso como excipiente farmacêutico em formas sólidas

Clays are natural materials that have great potential for use as excipients for solid dosage forms. Palygorskite is a type of clay that has hydrophilic properties as well as a large surface area, which could contribute to the dissolution of drugs. Thus, the present study aims to evaluate the use of palygorskite clay, from Piaui (Northeast region of Brazil), as a pharmaceutical excipient for solid dosage forms, using rifampicin and isoniazid as the model drugs. The former is a poorly soluble drug often associated with isoniazid for tuberculosis treatment. Palygorskite was characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and specific surface area (BET). The rheological and technological properties of palygorskite were determined and compared to those of talc, magnesium stearate and Aersosil 200. Mixtures between drugs and palygorskite were analyzed by differential scanning calorimetry (DSC), thermogravimetric analysis (TG) combined with thermal analysis (DTA) and Fourier Transform Infrared Spectroscopy (FT-IR), where the results were compared with those of the individual compounds. In addition, dissolution studies of solid dispersions and capsules containing the drugs, mixed with either palygorskite or a mixture of talc and magnesium stearate, were performed. The results showed that palygorskite has small particles with a high surface area. Its rheological characteristics were better than those of others commonly used glidants and lubricants. There was no interaction between palygorskite and the drugs (rifampicin and isoniazid). Among the dispersions studied, the mixture with palygorskite (5%) showed the highest drug dissolution when compared to other excipients. The dissolution of the rifampicin capsules containing palygosrkite was faster in higher concentrations. However, these differences were statistically different only in the first minutes of the dissolution experiment. The dissolution profile of isoniazid was also statistically different on the initial part of the experiment. The formulations prepared with isoniazid and palygorskite showed higher drug dissolution, but it was in descending order of concentration. According to these results, the palygorskite clay used in this study has great potential for application as an excipient for solid dosage forms

Estudo de compatibilidade e estabilidade térmica do ácido retinóico e hidroquinona por termogravimetria

Retinoic acid (RA) and hydroquinone (HQ) assets are widely used in pharmaceutical and cosmetic formulations, for having depigmenting properties and are largely produced in drugstores. To assist in the development of formulations containing the active RA and HQ National Forms of Brazilian Pharmacopoeia (2005 and 2012 ) proposes formulations with different excipients such as cetyl alcohol (AC), cetostearyl alcohol (ACT), methylparaben (MTP), propyl paraben ( PPB), glycerin (GLY), dipropylene glycol (DPG), imidazolidinil urea ( IMD ), cyclomethicone (CCM ), butylated hydroxytoluene (BHT), octyl stearate (ETO), EDTA, decil oleate (ODC) and hydroxipropymethyl celullose (HPMC). One of the difficulties found in most cosmetic formulations is the large number of incompatibilities between the components of the formulations, so the aim this study was to evaluate thermal stability and interactions between these active pharmaceutical ingredients and excipients. The depigmenting agents were analyzed by DSC and TG and excipients were analyzed by TG. The dynamic thermogravimetric curves were obtained on a SHIMADZU thermobalance, model DTG-60, using an alumina crucible, at the heating rate of 10ºC min-1, in the temperature range of 25-900 ºC, under an atmosphere of nitrogen at 50 mL min-1. The DSC curves were obtained using Shimadzu calorimeter, model DSC-60, using aluminum crucible, at the heating rate of 10ºC min-1, in the temperature range of 25-400ºC. The thermogravimetric and calorimetric curves were analyzed using TASYS software SHIMADZU. In this study no were found interactions between AR and the following excipients: MTP, PPB, IMD, ODC, EDTA, CCM, ETO, HPMC. However, were found interactions with the following excipients: AC, ACT, BHT, GLI and DPG. For HQ were found interactions with IMD and DPG. Interactions remained even changing proportions of the mixtures and the ternary. Thus, the studies conducted with excipients of National Formulary from 2005 and 2012 showed that these new excipients do not interact by thermogravimetry with the active pharmaceutical ingredients of this study

Eficácia de herbicidas aplicados em pós-emergência na cultura da soja convencional e transgênica

Na cultura da soja é frequente o uso de herbicidas seletivos aplicados em pósemergência para o controle das plantas daninhas. Com o objetivo de avaliar a eficiência e a seletividade de herbicidas aplicados em pós-emergência, isolados e em misturas, para o controle de plantas daninhas e os efeitos sobre o crescimento e o desenvolvimento da soja convencional (M-SOY 8001) e transgênica (M-SOY 7908 RR), foram desenvolvidos dois experimentos em campo, nos anos agrícolas 2006/2007 e 2007/2008. Os tratamentos constaram dos herbicidas: lactofen (168 g ha-1), glyphosate (1.080 g ha-1), lactofen + chlorimuronethyl (96 + 10g ha-1), chlorimuron-ethyl + imazethapyr (10 + 70 g ha-1), chlorimuron-ethyl + bentazon (10 + 600 g ha-1), glyphosate + imazethapyr (900 + 70 g ha-1), lactofen + chlorimuronethyl + imazethapyr (96 + 10 + 70 g ha-1) e lactofen + chlorimuron-ethyl + imazethapyr/ haloxyfop-methyl (96 + 10 + 70 + 60 g ha-1). Além disso, mantiveram-se duas testemunhas sem aplicação de herbicida (capinada e sem capina). O delineamento experimental utilizado foi em blocos ao acaso, com quatro repetições. O herbicida lactofen aplicado isoladamente e em mistura com chlorimuron-etyl, imazethapyr e haloxyfop-methyl provocou intoxicação inicial às plantas de soja, porém aos 27 dias após aplicação a cultura apresentava-se recuperada. No primeiro ano agrícola, as plantas daninhas foram satisfatoriamente controladas pelos tratamentos químicos. No segundo ano, os tratamentos que resultaram em melhor controle das infestantes foram glyphosate e glyphosate + imazethapyr. Houve redução na altura final das plantas, no segundo ano, tratadas com chlorimuron-ethyl + imazethapyr, lactofen + chlorimuron-ethyl + imazethapyr e lactofen + chlorimuron-ethyl + imazethapyr/haloxyfopmethyl. Foi constatada redução na produtividade de grãos da variedade M-SOY 7908 RR tratada com lactofen e com a mistura chlorimuron ethyl + bentazon no primeiro ano. A aplicação de chlorimuron-ethyl + bentazon proporcionou redução na produtividade da variedade M-SOY 8001 no segundo ano.

Compostos orgânicos como substratos na formação de mudas de ipê-amarelo (Tabebuia Chrysotricha (Mart. Ex. Dc.) Standl) irrigadas com água residuária

A necessidade de estudar a utilização dos resíduos de podas de árvores é de grande importância ambiental para solucionar os problemas de resíduos sólidos existentes nas áreas urbanas junto com os resíduos de lixos domésticos. O estudo destes materiais foi avaliado com o desenvolvimento de mudas de ipê-amarelo (Tabebuia Chrysotricha (Mart. Ex. Dc.) sandl) em diferentes misturas de substratos e tipos de água para irrigação. O experimento foi instalado no Departamento de Engenharia Rural da Faculdade de Ciências Agrárias e Veterinárias - UNESP, Câmpus de Jaboticabal. Foram realizados dois experimentos, avaliados juntamente com delineamento experimental em blocos casualizados, de oito substratos, duas qualidades de águas e quatro repetições, totalizando 64 parcelas. Cada parcela foi composta por 30 plantas (cinco linhas de seis plantas), sendo consideradas como úteis as três linhas de quatro plantas centrais da parcela. Foram testados oito substratos, resultantes da combinação de substrato comercial, composto de lixo e composto de poda de árvores com dois tipos de água de irrigação (água potável e residuária) e quatro repetições. Para acompanhar o desenvolvimento das mudas de ipê-amarelo, foram avaliados a altura da parte aérea das plantas (H) e o diâmetro do colmo (D). As características foram avaliadas aos 21; 42; 63 e 84 dias após a emergência. da análise dos resultados, possibilitou-se concluir que os substratos estudados promoveram diferenças significativas para a altura média das plantas e o diâmetro de colmo, em todos os períodos de avaliação. Os substratos 4 e 5 e a água residuária apresentaram os melhores resultados no desenvolvimento das mudas de ipê-amarelo.

Efeitos individuais e interativos da diversidade de detritos, contexto e variabilidade ambiental sobre a magnitude e estabilidade do processo de decomposição

Studies on the effects of changes in biodiversity and ecosystem functioning have been a central theme in ecology over the past two decades. Several studies have showed that the diversity of plant debris differently affects the decomposition process in aquatic and terrestrial environments, but we know very about the effects of detritus diversity on decomposition under fluctuating environmental conditions. We tested whether and how the environmental contexts, as well as the dynamic of their alternation, influence the effects of detritus diversity on the decomposition process. We performed a field experiment where we manipulate the litter diversity of 8 species of terrestrial plants decomposing (litterbags) in single and in mixture containing the eight species together in three different environmental contexts: the terrestrial environment (T), aquatic (A) and interface (I) - experimental treatment that simulates variation in flooding regime. We measured the rate of decomposition through the loss of mass of the community and each individual detritus in monocultures and mixtures. Species richness and environmental variability had no effects on the magnitude and stability of the decomposition process. However, there were significant diversity effects on the decomposition of an individual alien species, F. benjamina. Environmental context had significant effects on the magnitude and variability of decomposition. Detritus decomposition was faster and more variable on aquatic, interface and terrestrial conditions, respectively. Our results demonstrate that the diversity of plant detritus has minor effects to the decomposition across disparate environmental conditions and suggest that it is necessary to consider the potential of other abiotic factors in affect the magnitude and variability of the decomposition processes

Production technology for entomopathogenic fungus using a biphasic culture system

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Formação de mudas de eucalipto com utilização de lixo orgânico e níveis de irrigação calculados por dois métodos

O estudo das características e das possibilidades de utilização de Resíduo Sólido Urbano (R.S.U.) e mais especificamente de Resíduo Sólido Orgânico Urbano (R.S.O.U.), no Brasil e no Mundo, ainda não produziu informações que possibilitem conhecimentos suficientes para tomadas de decisões que estão sendo exigidas, em razão do crescente volume de resíduos produzidos e os impactos ao meio ambiente. Este trabalho teve o objetivo de estudar o efeito da irrigação associada ao uso de R.S.O.U. para formação de mudas de eucalipto. A pesquisa foi desenvolvida na UNESP, Câmpus de Jaboticabal - SP, sendo adotado como delineamento estatístico o esquema fatorial inteiramente casualizado. Foram utilizados 11 substratos: dois tipos de solos (um Latossolo Vermelho eutrófico e um Latossolo Vermelho distrófico), com e sem adubação química, seis misturas de solo e R.S.O.U., e um utilizando somente R.S.O.U. Sementes de eucalipto var. Citriodora Hooker foram semeadas diretamente em topetes e irrigadas com base em dois métodos de quantificação da água evapotranspirada (tanque Classe A e determinação da massa), em quatro níveis (50; 70; 100 e 130% da evapotranspiração). Os dados coletados e analisados estatisticamente demonstraram que doses acima de 20% de R.S.O.U. na mistura, em solos destinados à produção de mudas de eucalipto, causam efeitos negativos na sobrevivência das plantas.

Eficácia de herbicidas no controle de plantas daninhas na cultura da cebola em semeadura direta

As plantas de cebola provenientes da semeadura direta no campo são mais danificadas pelo cultivo mecânico e são mais sensíveis aos herbicidas, principalmente os latifolicidas, do que quando transplantadas. Com o objetivo de avaliar a eficácia dos herbicidas oxyfluorfen, ioxynil-octanoato e fluazifop-p-butil, aplicados em pós-emergência, isoladamente ou em mistura no tanque, com ou sem aplicação de paraquat, antes da emergência das plantas de cebola, conduziu-se este trabalho no município de Monte Alto, SP. Nenhum dos herbicidas aplicados isoladamente foi eficiente no controle de todas as espécies daninhas presentes na área experimental. As misturas no tanque de fluazifop-p-butil com oxyfluorfen ou ioxynil-octanoato, independente da aplicação ou não de paraquat aos cinco dias após a semeadura, controlaram eficientemente Portulaca oleracea, Amaranthus lividus, Echinochloa crusgalli, Eragrostis pilosa, Digitaria horizontalis, Eleusine indica e Brachiaria plantaginea, com produção de bulbos semelhante à da testemunha capinada.

Comportamento de baixas doses de herbicidas na cultura da soja (Glycine max (L.) Merril). I I-Efeitos sobre o controle das plantas daninhas, desenvolvimento e absorção de nutrientes pela cultura

Foi estudada a possibilidade de redução nas doses recomendadas de herbicidas, isolados ou em misturas, sem afetar algumas características das plantas de soja (Santa Rosa), tais como o acúmulo total de matéria secada parte aérea (caule + ramos, folhas e vagens), índice de Area Foliar (IAF) e teores de macro e micronutrientes (Diagnose Foliar e nos grãos). O experimento foi ins talado em Solo Latos - sol Vermelho Escuro - fase arenosa, município de Jaboticabal, Estado de São Paulo, Brasil. O delineamento experimental foi o de blocos ao acaso, em vinte tratamentos e três repetições, te stando-se a dose total recomendad a e reduções de 25% e 50% de la , para o trifluralin, alachlor e metribuzin, isolados e em misturas. As doses recomendadas foram 0,86; 1,72 e 0,28 kg/ha de trifluralin, alachlor e metribuzin, respectivamente. As 'misturas com doses reduzidas, de tri - fluralin + metribuzin (0 ,6 5 + 0, 21 kg/h a) e alachlor + metribuzin (1 ,4 4 + 0, 21 kg /h a), apresentaram controle geral das plantas daninhas acima de 90% at é o 60 .° dia após a semeadura, sem apresentar fitotoxicida de ou efeitos deletérios nas plantas de soja. Além disso apresenta ram os melhores resultados relativos ao acúmulo de matéria seca na parte aérea, juntamente com as mesmas misturas nas doses padrões e testemunha capinada. A absorção de nutrientes também sempre foi maior nestes tratamentos , com maiores teores nas folhas, na matéria seca geral e nos grãos. O IAF alto e a sua manutenção por um período maior, nestes tratamentos, podem ter tido influência decisiva, com maior eficiência fotossintética das plantas.