Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developing the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. It s important to point out that, in spite of the loads being normally connected to the transformer s secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developping the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. Its important to point out that, in spite of the loads being normally connected to the transformers secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Estresse entre professoras do ensino fundamental de escolas públicas estaduais

O artigo relata pesquisa que visou, entre outros objetivos, identificar a presença do estresse, a sintomatologia e as fases apresentadas pelos professores de 1ª a 4ª série do Ensino Fundamental atuantes em escolas públicas estaduais de uma cidade do Interior de São Paulo. Participaram do estudo 175 professores, perfazendo, aproximadamente, 70% dos profissionais de Ensino Básico I (PEB-I) em atuação no município. Para obtenção dos objetivos foram utilizados dois instrumentos de coleta de dados: o ISSL (Inventário de Sintomas de Estresse) e um questionário para caracterizar a população pesquisada. A pesquisa revelou que 56,6% dos professores estão experimentando estresse, cujos principais sintomas presentes são: sensação de desgaste físico constante, cansaço constante, tensão muscular, problemas com a memória, irritabilidade excessiva, cansaço excessivo, angústia/ansiedade diária, pensar constantemente em um só assunto e irritabilidade sem causa aparente.

Avaliação do desempenho de corte de diferentes grãos adiamantados

Por meio de um trabalho multidisciplinar entre Engenheiros e Dentistas, foram estudados oito diferentes tipos de grãos abrasivos de diamantes para a fabricação de pontas adiamantadas e/ou rebolos de pequeno diâmetro. Verificou-se qual o grão mais adequado para ser empregado nas pontas, as quais são utilizadas em equipamentos que possuem um pequeno torque disponível. Uma metodologia de experimentação para avaliação da capacidade de corte destas ferramentas foi desenvolvida, utilizando-se o vidro como material a ser desgastado. Como resultados, observou-se que a estrutura e a friabilidade do grão de diamante afetam diretamente a capacidade de corte das pontas adiamantadas. Desta forma, o melhor tipo de diamante foi aquele que apresentou, ao mesmo tempo, as melhores condições de remoção de material e o menor preço.

800x600 Apoio de residentes ao processo de gestão de projetos turisticos ambientais: um estudo do vale dos dinossauros em sousa/PB

This study aimed to analyse the factors that can contribute to the support of residents in the process of management of environmental tourism projects. The importance of reflecting on the municipal planning, including the management of stakeholders, is justified by changes in economic and social values of local communities, the concern with their space and quality of life. Thus, the support of the dwellers to the management process of an attractive allows motivate and prioritize the opinion of this community, strengthening social groups and integrating them into projects and local actions. The study was described as descriptive, exploratory and quantitative. As the analysis model. They were used the research variables done by Nunkoo and Ramkissoon (2012), as a way to assess the support of local dwellers on the development of Revitalization project of Monumento Natural Vale dos Dinossauros, in the management of environmental tourist destination, in Sousa/PB. Results show the relationship among the dimensions, confidence in government agencies, benefits and costs occasioned by tourism development in the attractive as influencers support elements of the deweller. Thus, it is intended to corroborate to the inclusion of stakeholdersin the planning process in the development of tourism in this location in order to involve them in decision making about planning and management of tourism in the city, with a view to sustainable local development

Fatores capazes de influenciar o apoio dos residentes ao desenvolvimento do turismo religioso em Santa Cruz - RN

This study is about the primary stakeholder management - the resident community, given its participation and support for the development of tourism in touristic destinations. It has as a general aim to analyze the factors that are capable to influence the residents‟ support to the development of religious tourism in Santa Cruz, RN, and the existing interrelationships between factors. In order to achieve this objective, it was necessary to use exploratory and descriptive research, followed by a quantitative approach through questionnaires with 422 residents of Santa Cruz -RN. The study was based on the variables relationship model proposed by Nunkoo and Ramkissoon (2012), it was also used the technique of Structural Equation Modeling - SEM, aiming to explain the relationships between the constructs studied. The results found on the survey suggest that the more residents realize the benefits generated by tourism, as well as trust in government actors in charge of tourism development, the more there will be a propensity to support the development of religious tourism. This result is similar to the one found in the study of Nunkoo and Ramkissoon (2012). We conclude that the structural model that best represents the reality of Santa Cruz -RN is composed of the factors: benefits, costs, and confidence in governmental actors, which are able to influence the support of Santa Cruz‟s residents for the development of religious tourism. It is also noteworthy that it was found a highly significant connection between the factors benefits perceived from tourism and confidence in governmental actors and between both of them, the political support for tourism

Circuito espacial de produção de sal:o uso do território do município de Macau/RN pelas indústrias salineiras

The current work it is a research of the spatial circle of salt production and the uses implied by RN salt industry, specifically the city of Macau / RN. Part of the issue - how it gives the uses implied by the spatial distribution of salt in the current historical period, known by some geographers as technical-scientific-informational. The way taken to answer this research was through readings of researches already carried out, field research in government agencies, the use of photographs, questionnaires and interviews. The search for data on production salting, their handling and marketing was one of the methodology steps. The result of this research was the perception of the dynamic activity of salting and uses transmitted within the city of Macau / RN, and the state of Rio Grande do Norte.

SPT-T: test procedure and applications

Ranzini (1988) proposed the Standard Penetration Test with torque measurement (SPT-T) and some geotechnical engineers in Brazil have been using it since 1991. This paper presents the state of the art on SPT-T testing, emphasizing what is already established as common knowledge in Brazilian engineering practice, besides a suggestion for test procedure, including equipment and practical aspects. In addition, the study of the shape of the torque versus rotation-degree angle curve obtained by an electric torquemeter used in several SPT-T tests carried out on six experimental research sites in the southeast region of Brazil is discussed here. Four different methods to predict pile capacity based on SPT-T test results are briefly presented and a comparison with load tests carried out on different types of piles, on those six experimental research sites, is presented.

Fiscal decentralization: increasing social cohesion among widely disparate territorial units

Includes bibliography

Institucionalidad social en América Latina

Incluye Bibliografía

Búsqueda de cohesión social y sostenibilidad fiscal en los procesos de descentralización

Incluye Bibliografía

Búsqueda de cohesión social y sostenibilidad fiscal en los procesos de descentralización

Incluye Bibliografía

Antigua and Barbuda: the yachting sector

Includes bibliography

A política habitacional brasileira entre 2003 e 2010: rupturas e continuismos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Os desafios da regulação do setor de transporte aéreo de passageiros no Brasil

Pós-graduação em Economia - FCLAR