Multiresidue determination of pesticides in honey samples by gas chromatography-mass spectrometry and application in environmental contamination

A simple and fast multiresidue method has been developed to determine 48 pesticides within the major groups of pesticides (organohalogen, organophosphorous, pyrethroids and organonitrogen) in representative samples of locally produced honey, in Bauru (State of São Paulo, Brazil) during 2003-2004. The recovery results found ranged from 76% to 95% and the limits of detection were lower than 0.01 mg/kg for gas chromatography with electron impact mass spectrometric detection in the selected ion monitoring mode (GC-MS-SIM). The results indicated that most pesticides found in the samples belonged to the organohalogen and organophosphorous groups and lower levels of residues of some organonitrogen and pyretroids were also detected. Malathion residues were detected in all the samples, in a high concentration, owing to its applications to control dengue mosquitoes in the area studied. (c) 2005 Elsevier Ltd. All rights reserved.

Determination of fluoroacetate and fluoride in blood serum by capillary zone electrophoresis using capacitively coupled contactless conductivity detection

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A New Approach for Real Time Fault Diagnosis in Induction Motors Based on Vibration Measurement

Condition monitoring is used to increase machinery availability and machinery performance, reducing consequential damage, increasing machine life, reducing spare parts inventories, and reducing breakdown maintenance. An efficient real time vibration measurement and analysis instruments is capable of providing warning and predicting faults at early stages. In this paper, a new methodology for the implementation of vibration measurement and analysis instruments in real time based on circuit architecture mapped from a MATLAB/Simulink model is presented. In this study, signal processing applications such as FIR filters and fast Fourier transform are treated as systems, which are implemented in hardware using a system generator toolbox, which translates a Simulink model in a hardware description language - HDL for FPGA implementations.

Parameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part I. Mathematical modeling

The conventional Newton and fast decoupled power flow (FDPF) methods have been considered inadequate to obtain the maximum loading point of power systems due to ill-conditioning problems at and near this critical point. It is well known that the PV and Q-theta decoupling assumptions of the fast decoupled power flow formulation no longer hold in the vicinity of the critical point. Moreover, the Jacobian matrix of the Newton method becomes singular at this point. However, the maximum loading point can be efficiently computed through parameterization techniques of continuation methods. In this paper it is shown that by using either theta or V as a parameter, the new fast decoupled power flow versions (XB and BX) become adequate for the computation of the maximum loading point only with a few small modifications. The possible use of reactive power injection in a selected PV bus (Q(PV)) as continuation parameter (mu) for the computation of the maximum loading point is also shown. A trivial secant predictor, the modified zero-order polynomial which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used in predictor step. These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approach for the IEEE test systems (14, 30, 57 and 118 buses) are presented and discussed in the companion paper. The results show that the characteristics of the conventional method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that parameters can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. (C) 2003 Elsevier B.V. All rights reserved.

Continuation fast decoupled power flow with secant predictor

The conventional Newton and fast decoupled power flow methods are considered inadequate for obtaining the maximum loading point of power systems due to ill-conditioning problems at and near this critical point. At this point, the Jacobian matrix of the Newton method becomes singular. In addition, it is widely accepted that the P-V and Q-theta decoupling assumptions made for the fast decoupled power flow formulation no longer hold. However, in this paper, it is presented a new fast decoupled power flow that becomes adequate for the computation of the maximum loading point by simply using the reactive power injection of a selected PV bus as a continuation parameter. Besides, fast decoupled methods using V and 0 as parameters and a secant predictor are also presented. These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained for the IEEE systems (14 and 118 buses) show that the characteristics of the conventional method are enhanced and the region of convergence around the singular solution is enlarged.

Plasma hormones, muscle mass and strength in resistance-trained postmenopausal women

Objective: To associate changes of body composition, muscle strength (MS) and plasma hormones (PH) in resistance-training protocol in sedentary postmenopausal women (PMW).Design: This randomized controlled trial, Brazilian 43 PMW (45-70-year-old) able for physical exercises were selected after they have accomplished medical and ethical criteria. They were assigned in two groups: RT, resistance training (n = 22); and CT, not trained control (n = 2 1); with supervision sessions of two to three exercise for large and one exercise for smaller groups in three series of 8-12 rep. (60-80% 1RM) for each exercise. The training period lasted 16 weeks and was preceded by low-load exercise (40-50% 1RM) adaptation period of 4 weeks (3/(times week)). Body weight, height, body mass index (BMI), and composition (BIA) along with fast-PH (FSH, LH, estrachol, cortisol, IGF-1 and testosterone) were assessed before (MO) and after (M 16) the 4 weeks period with the MS (1RM) determined also at 8 weeks (W). The values were correlated by Person's test and the means compared by Student's t-test and ANOVA.Results: At baseline both groups were similar in age, time of PMW, body composition, MS and fast-PH. However after 16 weeks, RT presented higher BMI (2. 1 %), IGF- 1 (37.8%) and MM gain (1.8 +/- 0.8 kg) than CT. MM correlated positively with IGF-1 (r = 0.45, p < 0.05) and MS progressively increased in all exercise greater in pectoral than legs and upper arms.Conclusion: Former sedentary postmenopausal women submitted to resistance training gained MM and MS irrespectively of fat mass changes but significantly associated with IGF-1 increase. (C) 2008 Elsevier B.V. All rights reserved.

Effect of intravenous propofol and remifentanil on heart rate, blood pressure and nociceptive response in acepromazine premedicated dogs

ObjectiveTo investigate the cardiorespiratory, nociceptive and endocrine effects of the combination of propofol and remifentanil, in dogs sedated with acepromazine.Study designProspective randomized, blinded, cross-over experimental trial.AnimalsTwelve healthy adult female cross-breed dogs, mean weight 18.4 +/- 2.3 kg.MethodsDogs were sedated with intravenous (IV) acepromazine (0.05 mg kg-1) followed by induction of anesthesia with IV propofol (5 mg kg-1). Anesthesia was maintained with IV propofol (0.2 mg kg-1 minute-1) and remifentanil, infused as follows: R1, 0.125 mu g kg-1 minute-1; R2, 0.25 mu g kg-1 minute-1; and R3, 0.5 mu g kg-1 minute-1. The same dogs were administered each dose of remifentanil at 1-week intervals. Heart rate (HR), mean arterial pressure (MAP), respiratory rate (f(R)), end tidal CO(2) (Pe'CO(2)), arterial hemoglobin O(2) saturation, blood gases, and rectal temperature were measured before induction, and 5, 15, 30, 45, 60, 75, 90, and 120 minutes after beginning the infusion. Nociceptive response was investigated by electrical stimulus (50 V, 5 Hz and 10 ms). Blood samples were collected for plasma cortisol measurements. Statistical analysis was performed by anova (p < 0.05).ResultsIn all treatments, HR decreased during anesthesia with increasing doses of remifentanil, and increased significantly immediately after the end of infusion. MAP remained stable during anesthesia (72-98 mmHg). Antinociception was proportional to the remifentanil infusion dose, and was considered satisfactory only with R2 and R3. Plasma cortisol concentration decreased during anesthesia in all treatments. Recovery was smooth and fast in all dogs.Conclusions and clinical relevanceInfusion of 0.25-0.5 mu g kg-1 minute-1 remifentanil combined with 0.2 mg kg-1 minute-1 propofol produced little effect on arterial blood pressure and led to a good recovery. The analgesia produced was sufficient to control the nociceptive response applied by electrical stimulation, suggesting that it may be appropriate for performing surgery.

Influence of feeding regime and finishing system on lamb muscle fiber and meat quality

Avaliou-se a influência dos níveis nutricionais da ovelha antes do parto, da idade à desmama e do sistema de terminação sobre as fibras musculares e a qualidade da carne dos cordeiros. Utilizaram-se matrizes mestiças Ile de France × Bergamacia criadas a pasto. As ovelhas foram divididas em dois grupos: um com suplementação alimentar 30 dias antes do parto e outro sem suplementação. Os animais (ovelha e cordeiros) foram subdivididos de acordo com a idade à desmama (45 ou 60 dias de idade) e os cordeiros desmamados foram submetidos a três sistemas de terminação: confinamento com dieta completa; confinamento somente com feno; e confinamento somente no pasto. O abate dos cordeiros foi realizado aos 30 kg de peso vivo ou aos 150 dias de idade. As características de carcaça analisadas foram morfofisiologia da fibra do músculo longissimus dorsi, fragmentação miofibrilar pós-morte (maturados nos dias 0, 3 e 7 pos mortem) e redução do pH e da temperatura da carne pós-abate. Não houve efeito da suplementação às ovelhas ou da idade à desmama sobre nenhuma das características avaliadas. A composição em fibras de contração lenta e oxidativa, contração rápida e oxidativa ou contração rápida e glicolítica não foi alterada pelos fatores em estudo, mas a área transversal das fibras foi menor nos cordeiros terminados com feno, assim como os valores de pH, temperatura e as medidas dos fragmentos de miofibrila. Com o aumento do tempo de maturação de 0 para 3 e 7 dias post mortem, houve redução do comprimento dos fragmentos de miofibrilas. O sistema de terminação de cordeiros em confinamento somente com feno interfere mais intensamente na qualidade da carne que o sistema de terminação a pasto ou em confinamento com dieta completa.

Morphological and histochemical study of the myotomal muscle in pacu (Piaractus mesopotamicus Holmberg, 1887) during the initial growth phases

Morphological and histochemical methods were used to evaluate the myotomal muscle characteristics of pacu (Piaractus mesopotamicus) from hatching to 40 days old. During the larval period, the musculature consisted predominantly of white muscle. White and red muscle mass increased at 10, 20, 30 and 40 days after hatching. The larvae had round muscle fibers with a moderate degree of maturation and central nuclei. In subsequent phases, small and immature fibers were visible near larger and more differentiated fibers. Undifferentiated cells or presumptive myoblasts located in embryogenic zones were visible in the dorsal and ventral regions, and were more evident at 30 and 40 days. The red muscle fibers located in the subdermal region, had oxidative metabolism and slow contraction, whereas the more predominant white muscle fibers had glycolytic metabolism and fast contraction. Our findings indicate that during the initial phases, myotomal muscle growth in pacu occurs by both, muscle fiber hypertrophy and hyperplasia. The analysis of frequency of red and white muscle fibers shows that hyperplastic growth is intense in this period. As the growth rate in adult fish is related to the number of muscle fibers in young fish, extrinsic factors could change the muscle fiber phenotype and influence their ultimate size.

The pulvinus endodermal cells and their relation to leaf movement in legumes of the Brazilian cerrado

Legume pulvini have a clearly delimited endodermis, whose variable content has been associated with the velocity and type of leaf movement: pulvini in leaves with fast nastic movement contain starch grains; pulvini in leaves with slow nastic movements have calcium oxalate crystals as well as starch grains in the endodermis. However, the studies carried out to date have involved few legume species. This study therefore purported to examine the consistency of this hypothesis in other legumes. Thus, the structure and content of the pulvinus endodermal cells of nine legumes of the Brazilian cerrado, with different types and velocities of leaf movement, were investigated: slow nyctinastic and heliotropic movements (Bauhinia rufa, Copaifera langsdorffii, Senna rugosa - Caesalpinioideae; Andira humilis and Dalbergia miscolobium - Faboideae; Stryphnodendron polyphyllum - Mimosoideae), slow heliotropic movement (Zornia diphylla - Faboideae), and fast seismonastic and slow nyctinastic and heliotropic movements (Mimosa rixosa and Mimosa flexuosa - Mimosoideae). Samples were prepared following standard plant anatomy and ultrastructure techniques. The endodermis of all the species contains starch grains. In the species displaying only slow movements, calcium oxalate prismatic crystals were observed in addition to starch grains, except in Zornia diphylla. in conclusion, oxalate crystals occur only in endodermal cells of pulvini that display slow movements, while starch grains are always present in pulvinus endodermal cells of plants with any kind of movement.

Maternal protein restriction induce skeletal muscle changes without altering the MRFs MyoD and myogenin expression in offspring

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

V2O5/TiO2 catalyst xerogels: Method of preparation and characterization

This work describes a modified sol-gel method for the preparation of V2O5/TiO2 catalysts. The samples have been characterized by N-2 adsorption at 77 K, X-ray Diffractometry (XRD), Scanning Electronic Microscopy (SEM/EDX) and Fourier Transform Infrared Spectroscopy (FT-IR). The surface area increases with the vanadia loading from 24 m(2) g(-1) for pure TiO2 to 87 m(2) g(-1) for 9 wt% of V2O5. The rutile form is predominant for pure TiO2 but becomes enriched with anatase phase when vanadia loading is increased. No crystalline V2O5 phase was observed in the diffractograms of the catalysts. Analysis by SEM showed heterogeneous granulation of particles with high vanadium dispersion. Two species of surface vanadium were observed by FT-IR spectroscopy: a monomeric vanadyl and polymeric vanadates. The vanadyl/vanadate ratio remains practically constant. Ethanol oxidation was used as a catalytic test in a temperature range from 350 to 560 K. The catalytic activity starts around 380 K. For the sample with 9 wt% of vanadia, the conversion of ethanol into acetaldehyde as the main product was approximately 90% at 473 K.

V(2)O(5)/TiO(2) catalytic xerogels raman and EPR studies

Raman spectroscopy and Electron Paramagnetic Resonance (EPR) studies were performed on a series of V(2)O(5)/TiO(2) catalysts prepared by a modified sol-gel method in order to identify the vanadium species. Two species of surface vanadium were identified by Raman measurements, monomeric vanadyls and polymeric vanadates. Monomeric vanadyls are characterized by a narrow Raman band at 1030 cm(-1) and polymeric vanadates by two broad bands in the region from 900 to 960 cm(-1) and 770 to 850 cm(-1). The Raman spectra do not exhibit characteristic peaks of crystalline V(2)O(5). These results are in agreement with those of X-ray Diffractometry (XRD) and Fourier Transform Infrared (FT-IR) previously reported (C.B. Rodella et al., J. Sol-Gel Sci. Techn., submitted). At least three families of V(4+) ions were identified by EPR investigations. The analysis of the EPR spectra suggests that isolated V(4+) ions are located in sites with octahedral symmetry substituting for Ti(4+) ions in the rutile structure. Magnetically interacting V(4+) ions are also present as pairs or clusters giving rise to a broad and structureless EPR line. At higher concentration of V(2)O(5), a partial oxidation of V(4+) to V(5+) is apparent from the EPR results.

The megalopa and juvenile development of Pachygrapsus transversus (Gibbes, 1850) (Decapoda, Brahyura) compared with other grapsid crabs

Megalopae were reared in the laboratory to the 7(th) crab stage. The megalopa and 1(st) crab stage are described and juvenile development was studied with emphasis on pleopodal differentiation. The megalopal phase, is easily identified, and shares with those of other Grapsinae and Plagusiinae big size, the presence of many natatory setae, and a series of conspicuous teeth on the inner margin of the dactyli from the 2(nd) to 4(th) walking leg. These features are regarded as adaptive for settlement in a wave-swept environment, such as the rocky marine intertidal where most of those species live. Fast development of juvenile pleopods is another characteristic of these subfamilies. In Pachygrapsus transversus, the sexes can be distinguished from the 2(nd) crab stage. Gonopod differentiation in males and the basic segmentation of all four pleopod pairs in females are already concluded at the 5(th) instar. A review of the available information indicated that settlement of large megalopae and fast juvenile development, preceding a precocious sexual maturity, are trends in Grapsinae and Plagusiinae. on the other hand, the Sesarminae pass through a more extensive juvenile instar sequence and presumably a delayed maturity.

The influence of UV-C irradiation on the properties of thermoplastic starch and polycaprolactone biocomposite with sisal bleached fibers

The effect of UV-C irradiation of the TPS and PCL biocomposites with sisal bleached fibers was investigated. The biocomposite was UV-C irradiated at room temperature under air atmosphere. The structural and morphological changes produced when the films were exposed to UV irradiation for 142 h, were monitored using Scanning Electron Microscopy (SEM), Mechanical Tensile Tests, Differential Scanning Calorimetry (DSC), X-ray diffraction, Thermogravimetric analysis (TGA), and Fourier transform infra-red analysis (FTIR). Addition of 5-10% fibers in composites exhibited improved mechanical and thermal properties attributed to more efficient dispersibility of fiber in the matrix and good compatibility between fibers and the matrix polymer, however, after irradiated, the tensile properties decreased due to chain scission. The samples of irradiated PCL and IFS showed crystallinity increase, whereas the blend and composites showed a decrease in crystallinity. The DSC and X-ray diffraction studies suggested interaction between polymers in the blend via carboxyl groups in thermoplastic starch-PCL and hydroxyl groups in fibers. (C) 2011 Elsevier Ltd. All rights reserved.