Tratamento de borra de petróleo com sistemas microemulsionados

During the storage of oil, sludge is formed in the bottoms of tanks, due to decantation, since the sludge is composed of a large quantity of oil (heavy petroleum fractions), water and solids. The oil sludge is a complex viscous mixture which is considered as a hazardous waste. It is then necessary to develop methods and technologies that optimize the cleaning process, oil extraction and applications in industry. Therefore, this study aimed to determine the composition of the oil sludge, to obtain and characterize microemulsion systems (MES), and to study their applications in the treatment of sludge. In this context, the Soxhlet extraction of crude oil sludge and aged sludge was carried out, and allowing to quantify the oil (43.9 % and 84.7 % - 13 ºAPI), water (38.7 % and 9.15 %) and solid (17.3 % and 6.15 %) contents, respectively. The residues were characterized using the techniques of X-ray fluorescence (XRF), Xray diffraction (XRD) and transmission Infrared (FT-IR). The XRF technique determined the presence of iron and sulfur in higher proportions, confirming by XRD the presence of the following minerals: Pyrite (FeS2), Pyrrhotite (FeS) and Magnetite (Fe3O4). The FT-IR showed the presence of heavy oil fractions. In parallel, twelve MES were prepared, combining the following constituents: two nonionic surfactants (Unitol L90 and Renex 110 - S), three cosurfactants (butanol, sec-butanol and isoamyl alcohol - C), three aqueous phase (tap water - ADT, acidic solution 6 % HCl, and saline solution - 3.5 % NaCl - AP) and an oil phase (kerosene - OP). From the obtained systems, a common point was chosen belonging to the microemulsion region (25 % [C+S] 5 % OP and AP 70 %), which was characterized at room temperature (25°C) by viscosity (Haake Rheometer Mars), particle diameter (Zeta Plus) and thermal stability. Mixtures with this composition were applied to oil sludge solubilization under agitation at a ratio of 1:4, by varying time and temperature. The efficiencies of solubilization were obtained excluding the solids, which ranged between 73.5 % and 95 %. Thus, two particular systems were selected for use in storage tanks, with efficiencies of oil sludge solubilization over 90 %, which proved the effectiveness of the MES. The factorial design delimited within the domain showed how the MES constituents affect the solubilization of aged oil sludge, as predictive models. The MES A was chosen as the best system, which solubilized a high amount of aged crude oil sludge (~ 151.7 g / L per MES)

Síntese, caracterização, propriedades e aplicação dos sistemas Mg- Al, Zn-Al e Mg-Fe

The Layered Double Hydroxides has become extremely promising materials due to its range of applications, easily obtained in the laboratory and reusability after calcination, so the knowledge regarding their properties is of utmost importance. In this study were synthesized layered double hydroxides of two systems, Mg-Al and Zn-Al, and such materials were analyzed with X-ray diffraction and, from these data, we determined the volume density, planar atomic density, size crystallite, lattice parameters, interplanar spacing and interlayer space available. Such materials were also subjected to thermogravimetric analysis reasons for heating 5, 10, 20 and 25 ° C / min to determine kinetic parameters for the formation of metaphases HTD and HTB based on theoretical models Ozawa, Flynn-Wall Starink and Model Free Kinetics. In addition, the layered double hydroxides synthesized in this working ratios were calcined heating 2.5 ° C / min and 20 ° C / min, and tested for adsorption of nitrate anion in aqueous solution batch system at time intervals 5 min, 15 min, 30 min, 1h, 2h and 4h. Such calcined materials were also subjected to exposure to the atmosphere and at intervals of 1 week, 2 weeks and 1 month were analyzed by infrared spectroscopy to study the kinetics of regeneration determining structural called "memory effect"

Período de recuperação do investimento em bomba hidráulica de melhor rendimento em sistemas de bombeamento na tarifa horossazonal verde

Neste trabalho, ajustou-se um modelo matemático para quantificar o efeito da variação do rendimento da bomba hidráulica na variação dos custos de um sistema de bombeamento, na estrutura tarifária horossazonal verde (subgrupo A4) e o tempo de recuperação do capital investido no equipamento de maior rendimento. em seguida, o mesmo foi aplicado a um sistema de bombeamento para suprimento de um sistema de irrigação do tipo pivô central. As opções de rendimento da bomba hidráulica foram: 69,5% (bomba 1), 73% (bomba 2) e 78% (bomba 3), cujos custos de aquisição foram, respectivamente, R$ 6.176,00, R$ 8.479,00 e R$ 15.509,00. Os resultados da aplicação do modelo mostraram que: i) a substituição da bomba 1 pela bomba 2 foi viável, sendo o período de recuperação de capital 3,4 anos; ii) a substituição da bomba 1 pela bomba 3 foi viável, sendo o período de recuperação de capital 9,2 anos; iii) a substituição da bomba 2 pela bomba 3 foi inviável, sendo o período de recuperação de capital 21,1 anos superior ao período de amortização do investimento na avaliação econômica, considerado 15 anos.

Estudo da viabilidade do desenvolvimento de sistemas integrados baseados em redes em chip sem processadores: sistema IPNoSys

The increase of capacity to integrate transistors permitted to develop completed systems, with several components, in single chip, they are called SoC (System-on-Chip). However, the interconnection subsystem cans influence the scalability of SoCs, like buses, or can be an ad hoc solution, like bus hierarchy. Thus, the ideal interconnection subsystem to SoCs is the Network-on-Chip (NoC). The NoCs permit to use simultaneous point-to-point channels between components and they can be reused in other projects. However, the NoCs can raise the complexity of project, the area in chip and the dissipated power. Thus, it is necessary or to modify the way how to use them or to change the development paradigm. Thus, a system based on NoC is proposed, where the applications are described through packages and performed in each router between source and destination, without traditional processors. To perform applications, independent of number of instructions and of the NoC dimensions, it was developed the spiral complement algorithm, which finds other destination until all instructions has been performed. Therefore, the objective is to study the viability of development that system, denominated IPNoSys system. In this study, it was developed a tool in SystemC, using accurate cycle, to simulate the system that performs applications, which was implemented in a package description language, also developed to this study. Through the simulation tool, several result were obtained that could be used to evaluate the system performance. The methodology used to describe the application corresponds to transform the high level application in data-flow graph that become one or more packages. This methodology was used in three applications: a counter, DCT-2D and float add. The counter was used to evaluate a deadlock solution and to perform parallel application. The DCT was used to compare to STORM platform. Finally, the float add aimed to evaluate the efficiency of the software routine to perform a unimplemented hardware instruction. The results from simulation confirm the viability of development of IPNoSys system. They showed that is possible to perform application described in packages, sequentially or parallelly, without interruptions caused by deadlock, and also showed that the execution time of IPNoSys is more efficient than the STORM platform

Um framework baseado em modelos para desenvolvimento de sistemas multimídia distribuídos autoadaptativos

Distributed multimedia systems have highly variable characteristics, resulting in new requirements while new technologies become available or in the need for adequacy in accordance with the amount of available resources. So, these systems should provide support for dynamic adaptations in order to adjust their structures and behaviors at runtime. This paper presents an approach to adaptation model-based and proposes a reflective and component-based framework for construction and support of self-adaptive distributed multimedia systems, providing many facilities for the development and evolution of such systems, such as dynamic adaptation. The propose is to keep one or more models to represent the system at runtime, so some external entity can perform an analysis of these models by identifying problems and trying to solve them. These models integrate the reflective meta-level, acting as a system self-representation. The framework defines a meta-model for description of self-adaptive distributed multimedia applications, which can represent components and their relationships, policies for QoS specification and adaptation actions. Additionally, this paper proposes an ADL and architecture for model-based adaptation. As a case study, this paper presents some scenarios to demonstrate the application of the framework in practice, with and without the use of ADL, as well as check some characteristics related to dynamic adaptation

N2N framework: uma plataforma para desenvolvimento de sistemas calaborativos distribuídos

O domínio alvo deste trabalho são os sistemas colaborativos distribuídos onde o foco está na troca dê mensagens entre usuários remotamente distribuídos. Nestes sistemas, há a necessidade das mensagens possuírem conteúdo multimídia e poderem ser entregues tanto a um usuário específico quanto a um grupo ou grupos de usuários. O objetivo deste trabalho é desenvolver um framework que facilite: a construção desse tipo de sistymas e diminua o tempo gasto com desenvolvimento através da técnica de reuso. Este trabalho apresenta o N2N Framework - Uma plataforma para desenvolvimento de Sistemas Colaborativos Distribuídos. O Framework foi concebido através da análise do comportamento de aplicações com características de multimídias colaborativas, como ambientes virtuais multi-usuários, chats, enquetes, e torcidas virtuais. O Framework foi implementado usando-se a plataforma Java. O N2N Framework facilita o design e implementação de sistemas colaborativos distribuídos, implementando a entrega das mensagens, e direcionando o desenvolvedor de aplicações para a preocupação com implementação de suas mensagens específicas e o processamento que delas decorre

Aspectos metodológicos relacionados aos sistemas manométricos utilizados em estudos hemodinâmicos

Atualmente, diante das técnicas atuais, a manometria tem sido relegada a plano secundário durante a cateterização cardíaca. No entanto, ainda fornece importantes informações para identificação e avaliação das doenças cardiovasculares. Os dados coletados durante os exames possibilitam a obtenção de variáveis quantitativas e qualitativas, as quais podem ser comparadas aos padrões normais. Os sistemas manométricos são compostos por transdutor, amplificador e registrador, que, em conjunto, devem espelhar com fidelidade a morfologia e os valores das variáveis analisadas. Para atingir esse objetivo, é necessário desempenho adequado de todos os componentes. Se uma determinada informação é de extrema relevância, o operador deve gastar tempo suficiente para obtê-la de maneira inequívoca. Assim, o operador deve estar familiarizado com os sistemas manométricos e com as fontes de erro relacionadas com as técnicas de registro, cateteres, conectores e fluidos. Com os fundamentos analisados neste manuscrito, salientamos que deve ser dispensada atenção às ondas de pressão usadas nas interpretações da fisiopatologia das doenças cardiovasculares.

Controle adaptativo por modelo de referencia e estrutura variável discreto no tempo

With the technology progess, embedded systems using adaptive techniques are being used frequently. One of these techniques is the Variable Structure Model- Reference Adaptive Control (VS-MRAC). The implementation of this technique in embedded systems, requires consideration of a sampling period which if not taken into consideration, can adversely affect system performance and even takes the system to instability. This work proposes a stability analysis of a discrete-time VS-MRAC accomplished for SISO linear time-invariant plants with relative degree one. The aim is to analyse the in uence of the sampling period in the system performance and the relation of this period with the chattering and system instability

Estudo de Fractalidade e Evolução Dinâmica de Sistemas Complexos

In this work, the study of some complex systems is done with use of two distinct procedures. In the first part, we have studied the usage of Wavelet transform on analysis and characterization of (multi)fractal time series. We have test the reliability of Wavelet Transform Modulus Maxima method (WTMM) in respect to the multifractal formalism, trough the calculation of the singularity spectrum of time series whose fractality is well known a priori. Next, we have use the Wavelet Transform Modulus Maxima method to study the fractality of lungs crackles sounds, a biological time series. Since the crackles sounds are due to the opening of a pulmonary airway bronchi, bronchioles and alveoli which was initially closed, we can get information on the phenomenon of the airway opening cascade of the whole lung. Once this phenomenon is associated with the pulmonar tree architecture, which displays fractal geometry, the analysis and fractal characterization of this noise may provide us with important parameters for comparison between healthy lungs and those affected by disorders that affect the geometry of the tree lung, such as the obstructive and parenchymal degenerative diseases, which occurs, for example, in pulmonary emphysema. In the second part, we study a site percolation model for square lattices, where the percolating cluster grows governed by a control rule, corresponding to a method of automatic search. In this model of percolation, which have characteristics of self-organized criticality, the method does not use the automated search on Leaths algorithm. It uses the following control rule: pt+1 = pt + k(Rc − Rt), where p is the probability of percolation, k is a kinetic parameter where 0 < k < 1 and R is the fraction of percolating finite square lattices with side L, LxL. This rule provides a time series corresponding to the dynamical evolution of the system, in particular the likelihood of percolation p. We proceed an analysis of scaling of the signal obtained in this way. The model used here enables the study of the automatic search method used for site percolation in square lattices, evaluating the dynamics of their parameters when the system goes to the critical point. It shows that the scaling of , the time elapsed until the system reaches the critical point, and tcor, the time required for the system loses its correlations, are both inversely proportional to k, the kinetic parameter of the control rule. We verify yet that the system has two different time scales after: one in which the system shows noise of type 1 f , indicating to be strongly correlated. Another in which it shows white noise, indicating that the correlation is lost. For large intervals of time the dynamics of the system shows ergodicity

Universaidade em sistemas da mecâniaestatística de não equilíbrio com estados absorventes e percolação geográfica

Complex systems have stimulated much interest in the scientific community in the last twenty years. Examples this area are the Domany-Kinzel cellular automaton and Contact Process that are studied in the first chapter this tesis. We determine the critical behavior of these systems using the spontaneous-search method and short-time dynamics (STD). Ours results confirm that the DKCA e CP belong to universality class of Directed Percolation. In the second chapter, we study the particle difusion in two models of stochastic sandpiles. We characterize the difusion through diffusion constant D, definite through in the relation h(x)2i = 2Dt. The results of our simulations, using finite size scalling and STD, show that the diffusion constant can be used to study critical properties. Both models belong to universality class of Conserved Directed Percolation. We also study that the mean-square particle displacement in time, and characterize its dependence on the initial configuration and particle density. In the third chapter, we introduce a computacional model, called Geographic Percolation, to study watersheds, fractals with aplications in various areas of science. In this model, sites of a network are assigned values between 0 and 1 following a given probability distribution, we order this values, keeping always its localization, and search pk site that percolate network. Once we find this site, we remove it from the network, and search for the next that has the network to percole newly. We repeat these steps until the complete occupation of the network. We study the model in 2 and 3 dimension, and compare the bidimensional case with networks form at start real data (Alps e Himalayas)

PEWS-RT, um sistema de tempo de execução para a linguagem PEWS

Web services are loosely coupled applications that use XML documents as a way of integrating distinct systems on the internet. Such documents are used by in standards such as SOAP, WSDL and UDDI which establish, respectively, integrated patterns for the representation of messages, description, and publication of services, thus facilitating the interoperability between heterogeneous systems. Often one single service does not meet the users needs, therefore new systems can be designed from the composition of two or more services. This which is the design goal behind the of the Service Oriented Architecture. Parallel to this scenario, we have the PEWS (Predicate Path-Expressions for Web Services) language, which speci es behavioural speci cations of composite web service interfaces.. The development of the PEWS language is divided into two parts: front-end and back-end. From a PEWS program, the front-end performs the lexical analysis, syntactic and semantic compositions and nally generate XML code. The function of the back-end is to execute the composition PEWS. This master's dissertation work aims to: (i) reformulate the proposed architecture for the runtime system of the language, (ii) Implement the back-end for PEWS by using .NET Framework tools to execute PEWS programs using the Windows Work ow Foundation

Unidade e multiplicidade do tempo: uma abordagem transdisciplinar

Procurou-se, neste trabalho, pensar o tempo no contexto das ciências da saúde, no qual se entrelaçam aspectos físicos, biológicos, psicológicos e sociológicos. Enquanto em nossa percepção do mundo e de nós mesmos o tempo se apresenta sob muitas facetas, na física clássica, conforme o modelo newtoniano, assumia-se a existência de um tempo absoluto, unilinear, homogêneo e independente do observador. Com a teoria da relatividade e o estudo dos sistemas complexos, um novo conceito de tempo apresenta-se na física: o tempo fractal, o qual possibilita maior compatibilidade com as abordagens psicológicas e sociológicas. Nesta perspectiva, a experiência de vida de uma pessoa, e seus respectivos processos de construção da saúde, envolveria uma multiplicidade de tempos, que coexistem e se organizam segundo um padrão coerente de auto-similaridade. Uma quebra desse padrão estaria correlacionada com a ocorrência da doença. Sugere-se que uma abordagem mais adequada do adoecimento deveria levar em conta, como referência para o profissional de saúde, o conceito de tempo fractal, possibilitando maior sintonia do paciente com a complexidade da natureza e, por conseguinte, consigo mesmo.

Respostas fisiológicas durante o exercício contínuo e intermitente: implicações para a avaliação e a prescrição do treinamento aeróbio

The objective of this study was to review the acute responses to maximal and supramaximal intermittent exercise (intensities near or above maximal oxygen uptake - iVO(2)max), and also at submaximal intermittent exercise, with intensities near maximal lactate steady state (MLSS). At the conditions of interval training above 100% iVO(2)max with short repetitions (<60 s), the passive recovery between the repetitions allows higher intensity during sets. For longer repetitions, the active recovery can be more efficient, since promotes greater blood lactate removal and longer time near VO(2)max. At the conditions of submaximal interval training, the relationship between intensity and duration of the repetitions are still maintained, i.e., the longer durations (>300 s) allow lower intensities and the shorter (150-300 s) allow higher intensities, with similar metabolic conditions (i.e., MLSS). However, both recovery types can be utilized, since they proportionate similar intensities at these conditions.

Estudo espectro eletroquímico de sistemas estruturados argila-corante

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aspectos taxonômicos de Schizomeris Kützing (Chaetophorales, Chlorophyta)

Schizomeris Kützing é uma alga filamentosa sem ramificações e com sistema basal de fixação diferenciado. O gênero contém a espécie-tipo Schizomeris leibleinii Kützing e duas espécies pouco conhecidas, S. irregularis Fritsch & Rich e S. indicum (Ghose) Fritsch & Rich. As espécies são diferenciadas, principalmente, através do tipo de sistema basal de fixação. Contudo, a taxonomia específica do gênero é confusa. Estudos morfométricos e morfológicos foram realizados em populações identificadas como S. leibleinii de acordo com duas abordagens. Na primeira, foram analisadas 11 populações de diferentes localidades e na segunda, duas populações distintas através de coletas mensais durante 11 meses. O diâmetro de filamentos multisseriados, diâmetro e comprimento de células de filamentos multi e unisseriados, presença de constrição, ápice dos filamentos e tipo de sistema basal foram analisados em ambas abordagens. Além disso, estudos cariológicos foram efetuados para complementar as informações taxonômicas. Os resultados revelaram ampla variação morfológica, sendo mais acentuada entre as populações de localidades diferentes que nas mesmas populações ao longo do tempo, mas as características mostraram um gradiente contínuo. Os diferentes tipos de sistemas basais descritos para as espécies do gênero (claviforme, apressório, lobado e rizóides) foram encontrados nas populações estudadas. Esses resultados sugerem que a distinção entre as três espécies é muito frágil e não pode ser apoiada pela diferenciação do sistema basal ou por características métricas. Acredita-se que, por essas razões, o gênero Schizomeris seja composto por uma única espécie. A análise cariológica resultou em n = 12, diferindo de estudos anteriores e algumas possíveis explicações são apresentadas.