Comparative study of the performance of the M-cycle counter-flow and cross-flow heat exchangers for indirect evaporative cooling - paving the path towards sustainable cooling of buildings

This paper provides a comparative study of the performance of cross-flow and counter-flow M-cycle heat exchangers for dew point cooling. It is recognised that evaporative cooling systems offer a low energy alternative to conventional air conditioning units. Recently emerged dew point cooling, as the renovated evaporative cooling configuration, is claimed to have much higher cooling output over the conventional evaporative modes owing to use of the M-cycle heat exchangers. Cross-flow and counter-flow heat exchangers, as the available structures for M-cycle dew point cooling processing, were theoretically and experimentally investigated to identify the difference in cooling effectiveness of both under the parallel structural/operational conditions, optimise the geometrical sizes of the exchangers and suggest their favourite operational conditions. Through development of a dedicated computer model and case-by-case experimental testing and validation, a parametric study of the cooling performance of the counter-flow and cross-flow heat exchangers was carried out. The results showed the counter-flow exchanger offered greater (around 20% higher) cooling capacity, as well as greater (15%–23% higher) dew-point and wet-bulb effectiveness when equal in physical size and under the same operating conditions. The cross-flow system, however, had a greater (10% higher) Energy Efficiency (COP). As the increased cooling effectiveness will lead to reduced air volume flow rate, smaller system size and lower cost, whilst the size and cost are the inherent barriers for use of dew point cooling as the alternation of the conventional cooling systems, the counter-flow system is considered to offer practical advantages over the cross-flow system that would aid the uptake of this low energy cooling alternative. In line with increased global demand for energy in cooling of building, largely by economic booming of emerging developing nations and recognised global warming, the research results will be of significant importance in terms of promoting deployment of the low energy dew point cooling system, helping reduction of energy use in cooling of buildings and cut of the associated carbon emission.

Prediction of visibility and aerosol within the operational Met Office unified model. I: Model formulation and variational assimilation

The formulation and performance of the Met Office visibility analysis and prediction system are described. The visibility diagnostic within the limited-area Unified Model is a function of humidity and a prognostic aerosol content. The aerosol model includes advection, industrial and general urban sources, plus boundary-layer mixing and removal by rain. The assimilation is a 3-dimensional variational scheme in which the visibility observation operator is a very nonlinear function of humidity, aerosol and temperature. A quality control scheme for visibility data is included. Visibility observations can give rise to humidity increments of significant magnitude compared with the direct impact of humidity observations. We present the results of sensitivity studies which show the contribution of different components of the system to improved skill in visibility forecasts. Visibility assimilation is most important within the first 6-12 hours of the forecast and for visibilities below 1 km, while modelling of aerosol sources and advection is important for slightly higher visibilities (1-5 km) and is still significant at longer forecast times

Sea surface temperature estimation from the Geostationary Operational Environmental Satellite 12 (GOES-12)

This paper describes the techniques used to obtain sea surface temperature (SST) retrievals from the Geostationary Operational Environmental Satellite 12 (GOES-12) at the National Oceanic and Atmospheric Administration’s Office of Satellite Data Processing and Distribution. Previous SST retrieval techniques relying on channels at 11 and 12 μm are not applicable because GOES-12 lacks the latter channel. Cloud detection is performed using a Bayesian method exploiting fast-forward modeling of prior clear-sky radiances using numerical weather predictions. The basic retrieval algorithm used at nighttime is based on a linear combination of brightness temperatures at 3.9 and 11 μm. In comparison with traditional split window SSTs (using 11- and 12-μm channels), simulations show that this combination has maximum scatter when observing drier colder scenes, with a comparable overall performance. For daytime retrieval, the same algorithm is applied after estimating and removing the contribution to brightness temperature in the 3.9-μm channel from solar irradiance. The correction is based on radiative transfer simulations and comprises a parameterization for atmospheric scattering and a calculation of ocean surface reflected radiance. Potential use of the 13-μm channel for SST is shown in a simulation study: in conjunction with the 3.9-μm channel, it can reduce the retrieval error by 30%. Some validation results are shown while a companion paper by Maturi et al. shows a detailed analysis of the validation results for the operational algorithms described in this present article.

The economics of enhanced landfill mining: private and societal performance drivers

This paper addresses the economics of Enhanced Landfill Mining (ELFM) both from a private point of view as well as from a society perspective. The private potential is assessed using a case study for which an investment model is developed to identify the impact of a broad range of parameters on the profitability of ELFM. We found that especially variations in Waste-to-Energy (WtE efficiency, electricity price, CO2-price, WtE investment and operational costs) and ELFM support explain the variation in economic profitability measured by the Internal Rate of Return. To overcome site-specific parameters we also evaluated the regional ELFM potential for the densely populated and industrial region of Flanders (north of Belgium). The total number of potential ELFM sites was estimated using a 5-step procedure and a simulation tool was developed to trade-off private costs and benefits. The analysis shows that there is a substantial economic potential for ELFM projects on the wider regional level. Furthermore, this paper also reviews the costs and benefits from a broader perspective. The carbon footprint of the case study was mapped in order to assess the project’s net impact in terms of greenhouse gas emissions. Also the impacts of nature restoration, soil remediation, resource scarcity and reduced import dependence were valued so that they can be used in future social cost-benefit analysis. Given the complex trade-off between economic, social and environmental issues of ELFM projects, we conclude that further refinement of the methodological framework and the development of the integrated decision tools supporting private and public actors, are necessary.

PERFORMANCE EVOLUTION OF PEER TO PEER NETWORKS

This thesis work concerns about the Performance evolution of peer to peer networks, where we used different distribution technique’s of peer distribution like Weibull, Lognormal and Pareto distribution process. Then we used a network simulator to evaluate the performance of these three distribution techniques.During the last decade the Internet has expanded into a world-wide network connecting millions of hosts and users and providing services for everyone. Many emerging applications are bandwidth-intensive in their nature; the size of downloaded files including music and videos can be huge, from ten megabits to many gigabits. The efficient use of network resources is thus crucial for the survivability of the Internet. Traffic engineering (TE) covers a range of mechanisms for optimizing operational networks from the traffic perspective. The time scale in traffic engineering varies from the short-term network control to network planning over a longer time period.Here in this thesis work we considered the peer distribution technique in-order to minimise the peer arrival and service process with three different techniques, where we calculated the congestion parameters like blocking time for each peer before entering into the service process, waiting time for a peers while the other peer has been served in the service block and the delay time for each peer. Then calculated the average of each process and graphs have been plotted using Matlab to analyse the results

Construção de base organizacional e suas implicações para performance corporativa: evidências da área abastecimento do Petróleo brasileiro S.A.

Esta dissertação examina algumas implicações do processo de implementação de estratégias para a performance corporativa. Este relacionamento é examinado na Área de negócios Abastecimento, da empresa Petróleo Brasileiro S.A, durante o período de 1996 e 2003. A despeito da profusão de estudos sobre estratégia empresarial, ainda há escassez de trabalhos que examinem o processo de implementação de mudanças organizacionais e suas implicações para o aprimoramento de certos indicadores de performance corporativa. Adicionalmente, tendem a prevalecer na literatura gerencial, abordagens pontuais de caráter imediatista e prescritivo, que não captam o processo de mudança organizacional e suas implicações para performance ao longo do tempo. o exame da implementação de estratégias é realizado com base em seis variáveis organizacionais extraídas da literatura existente: "comportamento da liderança"; "interação e influência"; "inovação e aprendizado"; "gestão de pessoas"; "comunicação e fluxos de conhecimento" e "estrutura organizacional". As implicações das mudanças na base organizacional para performance corporativa são examinadas a partir de dezenove indicadores, agrupados em três categorias: (i) operacionais, (ii) econômico-financeiro e (iii) segurança, meio ambiente e saúde. Esta dissertação consiste num estudo de caso individual, o qual é baseado em evidências empíricas qualitativas e quantitativas, coletadas em trabalhos de campo. A coleta dos dados baseou-se em fontes e técnicas múltiplas. Os efeitos das variáveis organizacionais que comporiam o Abastecimento, antes da criação da Área de negócio, em 1996, foram pequenos. Esses efeitos foram moderados no período entre 1996 a 2000, só apresentando impactos relevantes sobre indicadores operacionais entre 2000 e 2003, com reflexos positivos sobre o desempenho econômico, pois muitos custos foram reduzidos. Isso sugere que estratégias tecnológicas de longo prazo são um rumo robusto e consistente. As evidências sugerem que a empresa optou pela construção de uma base organizacional visando melhoria de performance no longo prazo, alinhando-se com autores que defendem essa construção como forma de fortalecer a competitividade no longo prazo. Esta dissertação contribui para o entendimento de fatores organizacionais que favorecem a implementação de estratégias e dos mecanismos que alavancam aprendizado e inovação numa empresa nacional. Este estudo conclui que a utilização de estruturas organizacionais, com o suporte da liderança e prática de baixas barreiras interfuncionais, alavancaram o aprendizado e a inovação, favorecendo resultados econômicos. Isto contradiz a proposição de autores que afirmam que reestruturação organizacional possui baixo potencial de geração de resultados, ou que enfatizam soluções de curto prazo para obtenção imediata de resultados, em detrimento da competitividade da empresa nos médio e longo prazos.

Implicações das competências técnico-organizacionais para a performance competitiva em empresas seguidoras de mercado: evidências do segmento de turismo de aventura no Rio de Janeiro

This work focuses on the implications of technological-organizational competences for improvement of performance indicators. This relationship is examined during 1984 to 2005 in three small companies that operate in Rio de Janeiro within adventure tourism, more specifically, within tandem flights on hang-gliding. Based on a comparative case study grounded in both qualitative and quantitative empirical evidences collected in a detailed field search, this study is supported by an existing metric available in literature and adapted to adventure tourism segment. The metric to measure competences is based on four techno-organizational function: (i) product; (ii) sales & marketing; (iii) infra-structure & operational process; (iv) managing systems. The examination of performance improvement is based on a set of typical indicators used by this segment to evaluate results. This dissertation contributes to deepening the understanding of how techno-organizational competences affect the competitive performance of companies in this sector of adventure tourism.

Acumulação de Competências Tecnológicas e suas Implicações para a Performance Corporativa: Um Estudo Comparativo entre Duas Empresas da Indústria Moveleira em Bento Gonçalves - RS

This dissertation focus the implication of differences in accumulation of technological competences among companies and its reflex on the improvement of indexes of operational, economical and financial performance. This connection has been investigated at D'Itália Móveis Industrial Ltda. and Pozza S.A Industrial Moveleira, both companies of the furniture market located in Bento Gonçalves - RS. Based on a comparative case study of these two companies, this dissertation is based on empiric evidences about how the company has accumulated its technological competences. Such evidences are qualitative and quantitative, and were collected from several sources in the studied companies. The examination of technological competences accumulation is done based on an analytical structure that exists in the literature, that has been adapted to the analysis of the furniture market. The examination of performance improvement is based on a set of indexes used in the furniture industry. Studies about this subject are found in the literature, but the application of these analytic structures in the furniture market is scarce, mainly in brazilian companies. It has been noticed that the company D'Itália has accumulated technological competences on all the three functions analysed, what suggests implications for the improvement of its performance. On the other side, the company Pozza has shown a paralysation on technological competences accumulation during a long time, what brought implications for the reduction of its corporative performance. In this way, the conclusion of this dissertation suggests that the accumulation of technological competences has contributed to explain the differences of performance between both companies. Besides, it explains how both companies have managed (or not) to accumulate their indexes of performance in the long run. Even though this conclusion is not different from other studies formerly done, this conclusion is derivated from a study applied to a kind of industry that still wasn¿t examined in the available literature.

Acumulação tecnológica e aprimoramento de performance competitiva: evidências de diferenças e similaridades e médias empresas do setor metal-mecânico no estado do rio de janeiro

The main objective of this dissertation is to examine the implications of technological capacities in the improvement of technical performance indexes, specifically at the company level. These relationships were examined in a small sample of metal-working enterprises in the state of Rio de Janeiro (1960 to 2006). Although diverse studies on technological competences have been carried out in the last twenty years, a gap in empirical studies still exist that correlate the performance of companies in the context of developing countries, especially in Brazil. Aiming to contribute to a reduction of these gaps, this dissertation examines the questions by the light of available models in literature, which opting themselves to using operational indexes of companies. For drawing the accumulation of technological competences in this study, the metric proposal by Figueiredo (2000) shall be used indicating the levels of technological qualification in process, product, and equipment functions. The empirical evidence examined in this dissertation is both qualitative and quantitative in nature and were collected, first hand, through extensive field research involving informal interviews, meetings, direct-site observation and document analysis. In relation to the results, the evidence suggests that: - In terms of technological accumulation, a company reached Level 5 of technological capacity in process and organization of production as well as product and equipment. Three companies obtained Level 4 in the function process function while two others had reached the same technological level in the functions of product and equipment. Two companies had reached Level 3 in the product and equipment functions and one remained this level in the function of process; - In terms of the rate of accumulation of technological capacities, the observed companies had reached Level 4 needs 29 years in process function, 32 years in product function and 29 years in equipment function; - In terms of improvement performance pointers, a company which reached Level 5 of technological capacity improved in 70% of its indicators of performance, while the company that had achieved Level 4 had raised its pointers 60% and the other companies had gotten improved in the order of 40%. It was evidenced that the majority of the pointers of the companies with higher levels of technological capacities had obtained better performance. This dissertation contributes to advancing the strategic management of companies in metal-working segment to understanding internal accumulation of technological capacity and indicators of performance especially in the field of empirical context studied. This information offers management examples of how to improve competitive performance through the accumulation of technological capacities in the process, product and equipment functions.

Acumulação de competências tecnológicas e suas implicações para o aprimoramento da performance técnico-econômica em operadoras e telecomunicações fixas: a experiência da Telemar Norte Leste S.A.

Esta dissertação examina as implicações do processo de acumulação de competências tecnológicas para a melhoria da performance técnico-econômica. Este relacionamento foi examinado na Telemar Norte Leste, empresa prestadora de serviços de telefonia fixa, durante o período de 1998 a 2002. O exame da acumulação de competências é feito tendo como base uma estrutura descritiva existente na literatura e adaptada especificamente para o setor de telefonia fixa. A aplicação de estruturas descritivas para examinar as implicações da acumulação de competências tecnológicas sobre o aprimoramento da performance técnico-econômica, em empresas do setor de telecomunicações no Brasil, ainda é escassa. Esta dissertação realiza essa análise, baseada num estudo de caso individual e fundamenta-se em evidências empíricas qualitativas e quantitativas, obtidas através de entrevistas, observação direta e documentação interna. A acumulação de competências tecnológicas foi estudada em duas funções: "desenvolvimento de processos comerciais, produtos e serviços" e "desenvolvimento de sistemas de telecomunicações e processos operacionais". O exame do aprimoramento de performance está baseado num conjunto de indicadores técnico-econômicos, típicos desse setor. A análise realizada na Telemar identificou que esta desenvolveu esforços que lhe possibilitaram acumular competências inovadoras nestas funções, considerando a estrutura analítica adaptada nesta dissertação, alcançando o Nível 5 ou Intermediário, numa escala de sete níveis. Foram ainda encontradas evidências de influencias positivas para o aprimoramento da performance de vinte e nove indicadores de desempenho analisados, representativos das funções analisadas. Alinhando-se a outros estudos recentes na literatura de empresas localizadas em países em desenvolvimento, as evidências encontradas nesta dissertação sugerem que a acumulação de competências para adaptar, modificar ou criar novas tecnologias é essencial para a sobrevivência e o desempenho competitivo das firmas, exercendo papel fundamental no aprimoramento de seus indicadores de performance. Outros fatores, internos e externos, podem também influenciar a evolução das empresas. Esta dissertação comenta somente a crise mundial do setor de telecomunicações. Provocada pela drástica reversão dos investimentos vinculados à nova economia, desde 2001 tem provocado uma revisão no processo de gestão dos prestadores de serviços de telecomunicações, afetando o desempenho organizacional. Este contexto, no entanto, dada a complexidade de suas implicações, não foram aqui examinados.

Lean management and innovation in operational efficiency: the EGR project implemented by Pirelli Tyre Brazil in Santo André plant

O trabalho tem como objetivo avaliar e descrever analiticamente a implementação de práticas de manufatura enxuta pela Pirelli Pneus no seu complexo industrial da América Latina. Além de uma descrição estruturada e ampla dos princípios de produção de Toyota e fundamentos teóricos do Lean thinking, uma ênfase especial será dedicada ao projeto EGR (Especialistas em Gestão da Rotina), como uma ferramenta estratégica para ser usada pela empresa multinacional italiana no futuro próximo, de modo a alcançar um resultado mais eficaz e eficiente na gestão da rotina diária. Este projeto, que representa um componente significativo do Pirelli Manufacturing System (PMS) e, principalmente, voltado para supervisores e gestores de plantas, consiste principalmente em ajudar a empresa a desenvolver a capacidade empresarial para avaliar corretamente o gap potencial existente entre os resultados atuais e os esperados, para tanto entender os desvios, bem como as causas subjacentes, e melhorar continuamente o desempenho da empresa por meio da padronização de processos e redução de desperdicios. Esses objetivos podem ser perseguidos, atuando em dois meios essenciais: habilidades técnicas e comportamentais de liderança para apoiar cada equipe de projeto; uma maior eficácia na gestão de indicadores de desempenho nas diferentes unidades de fábrica, de acordo com KPIs estabelecidos no nível central pelo Head Quarter. Além disso, a investigação será focada na experiência peculiar da planta de Santo André, onde o EGR começou como piloto, com o objetivo de captar as alterações relevantes (no lado organizacional e econômico) que este projeto trouxe para a empresa, através da realização de pesquisa de campo e entrevistas, que são orientados a recolher provas, considerações e opiniões de todos os principais atores envolvidos.

Performance comparativa entre R290/R600a (50:50) e R134a para drop-in em refrigerador doméstico

This research this based on the seminar on Use of Natural Fluids in Refrigeration and Air-Conditioning Systems conducted in 2007 in Sao Paulo. The event was inserted in the National Plan for Elimination of CFCs, coordinated by the Ministry of Environment and implemented by the United Nations Development Programme (UNDP). The objective of this research is analyze the performance of the hydrocarbons application as zeotropic mixtures in domestic refrigerator and validate the application of technical standards for pull down and cycling (on-off) tests to the mixture R290/R600a (50:50) in domestic refrigerator. It was first developed an computational analysis of R290/R600a (50:50) compared to R134a and other mass fractions of the hydrocarbons mixtures in the standard ASHRAE refrigeration cycle in order to compare the operational characteristics and thermodynamic properties of fluids based on the software REFPROP 6.0. The characteristics of the Lorenz cycle is presented as an application directed to zeotropic mixtures. Standardized pull down and cycling (on-off) tests were conducted to evaluate the performance of the hydrocarbons mixture R290/R600a (50:50) as a drop-in alternative to R134a in domestic refrigerator of 219 L. The results showed that the use of R290/R600a (50:50) with a charge of refrigerant reduced at 53% compared to R134a presents reduced energy performance than R134a. The COP obtained with hydrocarbon mixture was about 13% lower compared to R134a. Pull down times in the refrigerator compartments for fluids analyzed were quite close, having been found a 4,7% reduction in pull down time for the R290/R600a compared to R134a, in the freezer compartment. The data indicated a higher consumption of electric current from the refrigerator when operating with the R290/R600a. The values were higher than about 3% compared to R134a. The charge of 40 g of R290/R600a proved very low for the equipment analyzed

PERFORMANCE OF THE SLD BARREL CRID DURING THE 1992 PHYSICS DATA RUN

The SLD Barrel Cherenkov Ring Imaging Detector was fully operational in the 1992 physics data run. The electron drift velocity and magnetic field deflection of electron trajectories have been measured. Cherenkov rings have been observed from both the liquid and gas radiators. The number and the resolution of the angle of Cherenkov photons have been measured to be approximately equal to design specifications.

Sensor for hydrogen peroxide based on Prussian Blue modified electrode: Improvement of the operational stability

Improvement of the operational stability of amperometric sensors based on Prussian Blue (PB) modified glassy carbon electrodes is presented. The long term performance of the sensors was evaluated by injection of hydrogen peroxide (5 μM in potassium buffer) solutions in a flow-injection system during a period of 5-10 h. The following parameters were investigated and correlated with the performance of the sensor: the times for electrodeposition and electrochemical activation, temperature, storage time, pH, composition of the buffer solution and of volume sample injected. These analytical characteristics of the modified electrode can be emphasized: initial sensitivity of 0.3 A cm-2 M-1, detection limit of ca. 0.5 μM, precise results (r.s.d.< 1.5%) and possibility to carry out around 50 samples (50 μL) per hour.

Performance and operation of the CMS electromagnetic calorimeter

The operation and general performance of the CMS electromagnetic calorimeter using cosmic-ray muons are described. These muons were recorded after the closure of the CMS detector in late 2008. The calorimeter is made of lead tungstate crystals and the overall status of the 75 848 channels corresponding to the barrel and endcap detectors is reported. The stability of crucial operational parameters, such as high voltage, temperature and electronic noise, is summarised and the performance of the light monitoring system is presented. © 2010 IOP Publishing Ltd and SISSA.