Modulation of the perception of temporal order by attentional and pre-attentional factors

When two stimuli are presented simultaneously to an observer, the perceived temporal order does not always correspond to the actual one. In three experiments we examined how the location and spatial predictability of visual stimuli modulate the perception of temporal order. Thirty-two participants had to report the temporal order of appearance of two visual stimuli. In Experiment 1, both stimuli were presented at the same eccentricity and no perceptual asynchrony between them was found. In Experiment 2, one stimulus was presented close to the fixation point and the other, peripheral, stimulus was presented in separate blocks in two eccentricities (4.8º and 9.6º). We found that the peripheral stimulus was perceived to be delayed in relation to the central one, with no significant difference between the delays obtained in the two eccentricities. In Experiment 3, using three eccentricities (2.5º, 7.3º and 12.1º) for the presentation of the peripheral stimulus, we compared a condition in which its location was highly predictable with two other conditions in which its location was progressively less predictable. Here, the perception of the peripheral stimulus was also delayed in relation to the central one, with this delay depending on both the eccentricity and predictability of the stimulus. We argue that attentional deployment, manipulated by the spatial predictability of the stimulus, seems to play an important role in the temporal order perception of visual stimuli. Yet, under whichever condition of spatial predictability, basic sensory and attentional processes are unavoidably entangled and both factors must concur to the perception of temporal order.

c-Fos expression induced by electroacupuncture at the Zusanli point in rats submitted to repeated immobilization

In laboratory animals, acupuncture needs to be performed on either anesthetized or, if unanesthetized, restrained subjects. Both procedures up-regulate c-Fos expression in several areas of the central nervous system, representing therefore a major pitfall for the assessment of c-Fos expression induced by electroacupuncture. Thus, in order to reduce the effect of acute restraint we used a protocol of repeated restraint for the assessment of the brain areas activated by electroacupuncture in adult male Wistar rats weighing 180-230 g. Repeated immobilization protocols (6 days, 1 h/day and 13 days, 2 h/day) were used to reduce the effect of acute immobilization stress on the c-Fos expression induced by electroacupuncture at the Zusanli point (EA36S). Animals submitted to immobilization alone or to electroacupuncture (100 Hz, 2-4 V, faradic wave) in a non-point region were compared to animals submitted to electroacupuncture at EA36S (4 animals/subgroup). c-Fos expression was measured in 41 brain areas by simple counting of cells and the results are reported as number of c-Fos-immunoreactive cells/10,000 µm². The protocols of repeated immobilization significantly reduced the immobilization-induced c-Fos expression in most of the brain areas analyzed (P < 0.05). Animals of the EA36S groups had significantly higher levels of c-Fos expression in the dorsal raphe nucleus, locus coeruleus, posterior hypothalamus and central medial nucleus of the thalamus. Furthermore, the repeated immobilization protocols intensified the differences between the effects of 36S and non-point stimulation in the dorsal raphe nucleus (P < 0.05). These data suggest that high levels of stress can interact with and mask the evaluation of specific effects of acupuncture in unanesthetized animals.

Effects of life cycle profits on the profitability of industrial heavy duty cranes

The goal of the thesis was to investigate how much after-sales profits a crane sale generates over the life cycle of the crane and the effects of these after-sales profits on the overall profitability of the crane. The thesis utilizes theories about life cycle costing from an equipment and service supplier’s point of view. However, instead of costs, the thesis is focused on the life cycle after-sales profits from maintenance services and spare parts provided for the sold crane. The case study approach was chosen and a total of five cranes from three different segments were investigated. An eight-step life cycle profit calculation model was developed in order to analyze the chosen cases’ life cycle profits systematically. The results of the investigation suggest that the life cycle after-sales profits are significant in value. In the case analyses they accounted for between 20% and 44% of the overall life cycle profits of the case cranes. The after-sales profits should be taken into account already in the pricing when offering a crane to a customer.

Defining Sales and Operations Planning Process in an Environmental Management Company

Sales and operations research publications have increased significantly in the last decades. The concept of sales and operations planning (S&OP) has gained increased recognition and has been put forward as the area within Supply Chain Management (SCM). Development of S&OP is based on the need for determining future actions, both for sales and operations, since off-shoring, outsourcing, complex supply chains and extended lead times make challenges for responding to changes in the marketplace when they occur. Order intake of the case company has grown rapidly during the last years. Along with the growth, new challenges considering data management and information flow have arisen due to increasing customer orders. To manage these challenges, case company has implemented S&OP process, though initial process is in early stage and due to this, the process is not managing the increased customer orders adequately. Thesis objective is to explore extensively the S&OP process content of the case company and give further recommendations. Objectives are categorized into six different groups, to clarify the purpose of this thesis. Qualitative research methods used are active participant observation, qualitative interviews, enquiry, education, and a workshop. It is notable that demand planning was felt as cumbersome, so it is typically the biggest challenge in S&OP process. More proactive the sales forecasting can be, more expanded the time horizon of operational planning will turn out. S&OP process is 60 percent change management, 30 percent process development and 10 percent technology. The change management and continuous improvement can sometimes be arduous and set as secondary. It is important that different people are required to improve the process and the process is constantly evaluated. As well as, process governance is substantially in a central role and it has to be managed consciously. Generally, S&OP process was seen important and all the stakeholders were committed to the process. Particular sections were experienced more important than others, depending on the stakeholders’ point of views. Recommendations to objective groups are evaluated by the achievable benefit and resource requirement. The urgent and easily implemented improvement recommendations should be executed firstly. Next steps are to develop more coherent process structure and refine cost awareness. Afterwards demand planning, supply planning, and reporting should be developed more profoundly. For last, information technology system should be implemented to support the process phases.

The interconnections between customer loyalty, employee engagement and business performance

The interconnections of customer loyalty, employee engagement and business performance have been separately examined in several previous studies but actually a coherent study combining all of these components together has been lacking. This thesis aims to study all of these components and their interrelations at the same time in order to understand the organization as a one whole. The thesis includes an encompassing review of the previous studies related to customer loyalty and employee engagement. The theory presents both the theoretical approaches and the empirical findings from the earlier literature and builds therefore a strong fundament for the empirical part of this thesis. The empirical data in this thesis was provided by three case companies of a Nordic group operating in a business-to-business professional services branch and it used the Net Promoter Score method for measuring both customer loyalty and employee engagement. The thesis left interesting research questions open and provides therefore an intriguing study field for the future researches.

Creating better customer experiences: Service Design effects on customer experience

Pro gradu –tutkielman tavoitteena oli tutkia, kuinka palvelumuotoilua voidaan käyttää parempien asiakaskokemusten luomisessa. Tutkimuksen teoreettisessa osuudessa keskityttiin tutkimaan palvelumuotoilun ja asiakaskokemuksen käsitteitä. Tutkielman empiirinen osuus tehtiin laadullisena tutkimuksena, jossa vertailtiin asiakaskokemuksia kahdessa Espoon kaupungin yhteispalvelupisteessä: Leppävaarassa sijaitseva yhteispalvelupiste oli hiljattain suunniteltu uudelleen käyttäen palvelumuotoilun periaatteita; Matinkylän palvelupiste oli alkuperäisessä muodossaan tutkimuksen aikana. Tutkimuksen yhtenä tavoitteena oli myös selvittää, oliko palvelumuotoilun menetelmin tehty muotoiluprojekti Leppävaaran yhteispalvelupisteessä onnistunut, kun sitä arvioitiin asiakaskokemuksen näkökulmasta. Tutkielman aineisto kerättiin suoran havainnoinnin ja haastattelun keinoin. Yhteensä 33 yksittäistä asiakasta havannoitiin ja haastateltiin tutkimusta varten toukokuussa 2015. Vastaajat valikoituivat satunnaisesti havannointipäivien asiakkaista. Heitä havainnoitiin koko asiakaspolun ajan minkä jälkeen heitä haastateltiin. Tutkimuksen tulokset ovat kaksiosaiset. 1) Arvioitaessa asiakkaiden kokemuksia liittyen palvelutilan toimivuuteen ja aineelliseen ympäristöön todettiin, että palvelumuotoilulla saavuttettiin parempi asiakaskokemus, ja täten Leppävaaran muotoiluprojekti oli onnistunut tavoitteissaan. 2) Kun taas tuloksia tarkasteltiin asiakaspalvelutilanteiden näkökulmasta, projekti ei ollut päässyt tavoitteisiin ja palvelumuotoilun menetelmillä ei pystytty parantamaan asiakaskokemuksta. Espoon kaupungin muotoiluprojekti on vielä kesken, tulosten perusteella tutkija ehdotti jatkotoimenpiteenä muun muassa lisäkoulutusta palveluhenkilökunnalle.

The transforming network of a foreign company operating in Mongolia. Case: A Finnish firm in Mongolia

In the globalising business environment ever fewer market areas remain unknown. Mongolia is yet only considered as an isolated strip between two power states. The purpose of this study is to put Mongolia on the map of academic business research. This is done by describing the transforming network of a foreign company operating in Mongolia. The objective of the study is approached through a case study, which presents the transformation of a Finnish company operating in Mongolia. This study aims at providing understanding on how the foreign case company observes the transformations of its network. The transformation within the case company is reflected to the transformations that occur in the Mongolian business environment. This study was conducted through a qualitative, intrinsic case study approach. The empirical data was gathered by using the method of network pictures. The network pictures were completed with the assistance of themed interviews. In order to be able to analyse the transformation within a network, three different time periods were observed: the past period around 2000, the present around 2014, and the estimated future around 2020. The data was collected from four executives positioned either in Finland, Russia or Mongolia. The respondents have a long experience within the case company, they hold managerial position, and therefore were able to offer valuable data for this study. The analytical framework used to analyse the collected data was built on the industrial network model, the ARA (actors-resources-activities)-model. The study shows that the changing business environment of Mongolia was utilised by the case company. In order to better meet the transforming customer wishes, the case company transformed from being a retailer to being a manufacturer. The case company was able to become a pioneer in the market. Thus, the case company has undergone similar kind of rapid transformation as the economy of Mongolia in entirety. This study shows that the general nature of the ARA-model makes it usable for new research contexts. The initial ARA-model offers a way to identify the dimensions of a network and a mean to understand these dimensions. The ARA-model can be applied to different contexts and to all time dimensions, past, present and future. The managerial recommendations offered in this study are directed towards the managers that plan to start operations in Mongolia. While this study is the first of its kind, it offers a good starting point for the future research on the change of Mongolian business networks. Valuable information could, for example, be obtained from a comparative study between the case company of this study and a multinational mining company operating in Mongolia.

Customer Experience Management – How to Improve the Customer Experience Management and its Measurement

The main goal of this master’s thesis was to find out, how to improve customer experience management and measurement. This study is a qualitative case study, in which the data collection method has been interviews. In addition, some of the company’s customer experience measurement methods have been analyzed. The theoretical background is applied in practice by interviewing 5 representatives from the case company. In the case company, the management has launched a customer experience focused program, and given guidelines for customer experience improvement. In the case company, customer experience is measured with different methods, one example is asking the recommendation readiness from a customer. In order to improve the customer experience management, the case company should define, what the company means with customer experience and what kind of customer experience the company is aiming to create. After the encounter, the customer should be left with feelings of satisfaction, positivity and trust. The company should focus on easiness in its processes, on top of which the processes should work fluently. The customer experience management should be improved through systematic planning, and by combining and standardizing different measures. In addition, some channel-based measures should be used. The measurement conducted should be more customer focused, and the case company should form an understanding, which touch points are the most relevant to measure.

The role of import intermediary companies in the Russian imports from the EU A case study of a Russian industrial company’s point of view on import intermediaries

The literature on agency suggests different implications for the use of export intermediaries. However, only few studies provide a view on import intermediaries. This thesis tries for its part to fill this research gap by studying the import intermediaries in the EU–Russia trade from a Russian industrial company’s point of view. The aim is to describe import intermediation and explain the need for import intermediary companies in the EU–Russia trade. The theoretical framework of this thesis originates from an article by Peng and York (2001), in which they study the performance of export intermediaries. This thesis applies resource-based theory, transaction cost theory and agency cost theory, following the idea of Peng and York. The resource-based theory approach is utilised for describing an ideal import intermediary company, and transaction cost theory provides a basis for understanding the benefits of using the services of import intermediary companies, while agency cost theory is applied in order to understand the risks the Russian industrial company faces when it decides to use the services of import intermediaries. The study is performed in the form of a case interview with a representative of a major Russian metallurgy company. The results of the study suggest that an ideal intermediary has the skills required specifically for the imports process, in order to save time and money of the principal company. The intermediary company helps reducing the amount of time the managers and the staff of the principal company use to make imports possible, thus reducing the salary costs and providing the possibility to concentrate on the company’s core competencies. The benefits of using the services of import intermediary companies are the reduced transaction costs, especially salary costs that are minimised because of the effectiveness and specialisation of import intermediaries. Intermediaries are specialised in the imports process and thus need less time and resources to organise the imports. They also help to reduce the fixed salary costs, because their services can be used only when needed. The risks of being misled by intermediaries are minimised by the competition on the import intermediary market. In case an intermediary attempts fraud, it gets replaced by its rival.

Content marketing performance measurement system in the context of customer acquisition

This thesis examines how content marketing is used in B2B customer acquisition and how content marketing performance measurement system is built and utilized in this context. Literature related to performance measurement, branding and buyer behavior is examined in the theoretical part in order to identify the elements influence on content marketing performance measurement design and usage. Qualitative case study is chosen in order to gain deep understanding of the phenomenon studied. The case company is a Finnish software vendor, which operates in B2B markets and has practiced content marketing for approximately two years. The in-depth interviews were conducted with three employees from marketing department. According to findings content marketing performance measurement system’s infrastructure is based on target market’s decision making processes, company’s own customer acquisition process, marketing automation tool and analytics solutions. The main roles of content marketing performance measurement system are measuring performance, strategy management and learning and improvement. Content marketing objectives in the context of customer acquisition are enhancing brand awareness, influencing brand attitude and lead generation. Both non-financial and financial outcomes are assessed by single phase specific metrics, phase specific overall KPIs and ratings related to lead’s involvement.

Utilizing analytic modelling process in industrial retail context

Nykypäivän monimutkaisessa ja epävakaassa liiketoimintaympäristössä yritykset, jotka kykenevät muuttamaan tuottamansa operatiivisen datan tietovarastoiksi, voivat saavuttaa merkittävää kilpailuetua. Ennustavan analytiikan hyödyntäminen tulevien trendien ennakointiin mahdollistaa yritysten tunnistavan avaintekijöitä, joiden avulla he pystyvät erottumaan kilpailijoistaan. Ennustavan analytiikan hyödyntäminen osana päätöksentekoprosessia mahdollistaa ketterämmän, reaaliaikaisen päätöksenteon. Tämän diplomityön tarkoituksena on koota teoreettinen viitekehys analytiikan mallintamisesta liike-elämän loppukäyttäjän näkökulmasta ja hyödyntää tätä mallinnusprosessia diplomityön tapaustutkimuksen yritykseen. Teoreettista mallia hyödynnettiin asiakkuuksien mallintamisessa sekä tunnistamalla ennakoivia tekijöitä myynnin ennustamiseen. Työ suoritettiin suomalaiseen teollisten suodattimien tukkukauppaan, jolla on liiketoimintaa Suomessa, Venäjällä ja Balteissa. Tämä tutkimus on määrällinen tapaustutkimus, jossa tärkeimpänä tiedonkeruumenetelmänä käytettiin tapausyrityksen transaktiodataa. Data työhön saatiin yrityksen toiminnanohjausjärjestelmästä.

Myyjien tietämyksen jakaminen organisaatiolle osana myyntiprosessia

Diplomityön tavoitteena on tutkia myyjien tietämyksen jakamista ja sen yhteyttä myyntiprosessiin. Tutkimus on toteutettu systemaattisena kirjallisuuskatsauksena. Työssä pyritään löytämään kirjallisuuden pohjalta yhteydet myyntiprosessin vaiheiden ja vaatimusten sekä myyjien tietämyksen jakamisen väliltä. Teoreettisena taustana esitellään myyntiprosessin kuvauksia, vaiheita ja haasteita yleisellä tasolla, jotta löydetään tehokkaan prosessin edellyttämät tekijät. Lisäksi tutkitaan tietämyksen vaikutusta myyntitehokkuuteen ja etsitään tietämyksen jakamiseen ja hyödyntämiseen vaikuttavia tekijöitä yleisesti ja myyntityöhön liittyen. Työn soveltavassa osuudessa tarkasteltiin tietämyksen kannalta tärkeitä myyntiprosessin vaiheita: asiakasvalinta, esivalmistelu, presentaatio ja neuvottelu sekä kaupan päättäminen. Jokaisessa vaiheessa todettiin olevan hyötyä myyjien tietämyksen jakamisesta. Läpikäydyn aineiston pohjalta tehtiin kaksi keskeistä huomiota. Ensinnäkin myyjien tietämyksen jakaminen on johdettavissa suoraan osaksi myyntiprosessia ja tietämyksellä on merkittävä rooli myyntityössä. Toiseksi myyntiprosessi ja myyjien tietämyksen jakaminen edellyttävät monia samoja asioita. Asiakas ja asiakkaan tarpeet ovat molemmissa keskiössä ja molempiin linkittyy henkilökuntaa yli osastorajojen. Tietoa on olemassa paljon joten on tärkeää suunnata resurssit oleelliseen. Tietotekniikan kehitys auttaa myyntitoiminnan jäsentämisessä ja tietämyksen jakamisessa, mutta on syytä pitää mielessä, että tietotekniikan rooli on tukitoiminto. Molemmat ovat turhia jos sovittuja pelisääntöjä ei noudateta. Lisäksi onnistunut implementointi edellyttää johdon sitoutumista ja riittävän laajaa henkilökunnan osallistamista.

Customer Knowledge Transfer in MNCs

The purpose of this Master’s thesis was to study customer knowledge transfer processes in multinational corporations (MNCs). The main objective was to examine how customer knowledge is transferred in MNCs and what kind of factors enhance or inhibit the knowledge transfer process, and to create a framework on the basis of the existing literature and the empirical findings. In this thesis the factors were organized according to whether they are properties of the unit involved in knowledge management, properties of relationships between the units or properties of the knowledge itself. There are various properties that influence knowledge transfer but in this thesis the focus was on examining the relevant findings from the customer knowledge viewpoint. Empirical results show that internal fragmentation in the MNC seems to be inherent in this type of organization, and may cause many problems in customer knowledge transfer and utilization. These knowledge transfer inhibitors rise from the organization’s properties: it’s absorptive capacity, motivation, organizational culture, and the two dimensions of knowledge. However, in spite of the inherent forces causing internal fragmentation and inhibiting knowledge transfer, moderate customer knowledge and expertise codification, cooperative working practices among the experts, and socialization mechanisms posed by the headquarters seem to help maintain customer knowledge transfer, and value creation in the long-term relationship. This value creation can be seen to be based on accessing and integrating a wide variety of knowledge resources in order to create a coherent product and service offering.

Organisational purchasing of service design – Agency and client perspectives

There has been an increase in the interest in service design, as companies have become more customer-centric and their focus has shifted to customer experiences. The actual organisational purchasing of service design has been given little attention, until recent years. The purpose of this study is to explore the purchasing of service design from the perspectives of sellers (service design agencies) and buying clients (business organisations). In order to understand the phenomenon, also agencies and clients’ approaches to service design discipline, purchasing processes, challenges related to purchasing and ways of facilitating the purchasing are explored. The research follows qualitative research method and utilises abductive reasoning. A proposition framework was formed by combining services marketing, design and organisational buying behaviour literatures, and was tested against real-life business cases. Empirical data was gathered by interviewing eight service design agency representatives and five client representatives in Finland. The results of semi-structural interviews were analysed by finding repetitive themes. The proposition framework was updated according to interview findings. There were both similarities and differences in service design agencies and clients’ approaches to service design. Service design represents a strategic activity to both parties, and it helps in clients’ business development and in discovering opportunities. It is an ideology; a way of thinking and working. The driving force for purchasing service design seemed to be something else than service design itself. Projects have been bought for 1) change and innovation related development, 2) channel related development or for 3) customer experience related development. Seven purchasing challenge themes were recognised: 1) poor or differing service design understanding, 2) selling of service design, 3) varying expectations, 4) difficulty of pre-evaluation, 5) buyers and buying companies, 6) project process and nature and 7) unclear project results. These all can be considered to cause challenges in organisational service design purchasing. Challenges can be caused by either participant, the agency or the client, and take place at any point of the purchasing process. Some of the challenges could be considered as barriers to purchasing or they play a role in an unsuccessful service project – and therefore, result in an unsuccessful organisational purchase. Purchasing could be facilitated in various ways by either participant; some ways are more attitude based, others actionable improvements. Thesis’s theoretical and managerial findings can be utilised to both improve the selling and purchasing of service design services.

Life-related negative customer emotions in real estate agent encounters

The goal of this study was to explore how do customers’ life-related negative emotions affect real estate business. This was divided into two research questions: 1. What life-related negative emotions can be recognised in real estate customer encounters? 2. How do the recognised emotions affect customer encounters and the realtor’s work? 3. How can the realtor take the emotions into account in customer service? The theoretical background consists of two main lines of study: emotions and customer encounters. A wide literary review on emotions research was conducted from a cognitive psychology point of view, focusing on negative emotions. Emotions research was then combined into the field of customer encounters. Qualitative study was chosen as the methodological basis of the study. Empirical material of this study was collected through in-depth interviews with 13 successful Finnish real estate agents. Narrative research was used as a method for the study. Four life-related emotion categories were recognized in real estate customer encounters: sadness, anger, anxiety and shame. These emotions rose from issues varying from death of a close one to divorce and from major changes in life stages to deep emotional attachment to an old home. The study also found that these incidental negative emotions do affect customer encounters and realtors’ work. The emotions affected the decision making of customers and sometimes overshadowed reason. Some emotions made the customer passive and slow to make any decisions, while others made their decision making fast and hasty. Even though the incidental emotions might not have had anything to do with the real estate deal, they could affect the outcome of the customer encounter and the whole real estate deal. Interestingly enough, the study found that not all successful real estate agents knowingly serve customers in an emotional level. The study does, however, suggest that in fact it may be an ethical decision of the customer server to take into account the emotional state of the customer. Attending to the emotional side of customers does not only increase pleasantness of the customer encounter, but may improve and balance customer decision making and prevent hasty decisions possibly leading to improved customer satisfaction. This study also gave practical managerial implications to customer service providers on how negative incidental emotions can be attended to in a customer encounter. This study could be useful not only to real estate agents, but also in other types of customer service, especially with vulnerable populations or other types of home-related business.