Actividad insecticida sobre Spodoptera frugiperda (Lepidóptera: Noctuidae) de los compuestos aislados de la parte aérea de Piper septuplinervium (Miq.) c. dc. y las inflorescencias de Piper subtomentosum Trel. & Yunck. (Piperaceae)

The bioassay-guided purification of ethanolic extracts from inflorescences of Piper subtomentosum Trel. & Yunck and aerial part of Piper septuplinervium (Miq. ) C. DC. led to isolation of five flavonoids, uvangoletin (1), galangin (2), chrysin (5), 5-hydroxy-4',7-dimethoxy-flavone (6), pinostrobin (7); one amide, N-p-coumaroil-tyramine (4); one acylglycerol, monopalmitin (3); one derivative of acid, protocatechuic acid (8); and glycosydated sterol, daucosterol (9). Their structures were elucidated on the basis of spectroscopy and spectrometry data and by comparison with data reported in the literature. The isolated compounds were tested against Spodoptera frugiperda. The results showed galangin and protocatechuic acid to be the most active (LC 50 13.63 and 17.16 ppm, respectively).

Alterações metabólicas em plantas de feijão originadas de sementes microbiolizadas por Pseudomonas sp. e inoculadas com Xanthomonas axonopodis pv. phaseoli

Muitas enzimas estão envolvidas em reações de defesa de plantas contra patógenos. O objetivo deste trabalho foi verificar alterações na atividade de algumas destas enzimas em plantas de feijão originadas de sementes microbiolizadas com um isolado de Pseudomonas do grupo das fluorescentes (isolado DFs842). Sementes de feijão cultivar BRS Valente foram imersas em suspensão salina preparada a partir de crescimento bacteriano com 24 h do isolado de Pseudomonas (OD540=0,5) sabidamente biocontroladora de Xanthomonas axonopodis pv. phaseoli. Como testemunhas, as sementes foram imersas em solução salina (NaCl 0,85%). Após a microbiolização por 5 h a 10ºC, as sementes foram plantadas em vasos contendo uma mistura de solo não esterilizado, areia e esterco bovino (proporção 3:1:1), mantidos em casa de vegetação. A inoculação do patógeno foi realizada na terceira folha verdadeira de todas as plantas, fazendo-se cortes com tesoura imersa em suspensão salina do patógeno (X. axonopodis pv. phaseoli) preparada a partir de crescimento de 24 h (OD540=0,4). Câmaras úmidas foram mantidas 24 h antes e após a inoculação. Para o preparo do extrato protéico, as três primeiras folhas verdadeiras foram coletadas individualmente em 5 épocas de coleta distintas: uma, momentos antes da inoculação e as demais nos tempos seis, 24, 72 h e 15 dias após a inoculação. Este extrato protéico serviu de fonte para as determinações do teor de proteínas solúveis totais (PST), atividade da polifenol oxidase (PPO) e da peroxidase (PO), as quais foram realizadas por leituras espectrofotométricas. Os resultados demonstraram aumento significativo no teor de PST e na atividade de PPO nas plantas submetidas ao tratamento com isolado DFs842, sendo que, o teor de PST foi o dobro, em relação às plantas não tratadas. Também foi observado que, mesmo antes da inoculação do patógeno o teor de PST e a atividade de PPO nas plantas tratadas estavam bem maiores. Em relação à atividade de PO houve redução da mesma nas plantas tratadas com o isolado de Pseudomonas (DFs842). Esses resultados evidenciaram que a microbiolização das sementes provocou alterações metabólicas nas plantas delas originadas, pelo aumento do teor de PST e atividade de PPO, indicando uma provável participação destas enzimas na indução de resistência ativada pela microbiolização com o isolado de Pseudomonas (DFs842).

Readout Electronics for Gas Electron Multiplier Detectors

The European Organization for Nuclear Research (CERN) operates the largest particle collider in the world. This particle collider is called the Large Hadron Collider (LHC) and it will undergo a maintenance break sometime in 2017 or 2018. During the break, the particle detectors, which operate around the particle collider, will be serviced and upgraded. Following the improvement in performance of the particle collider, the requirements for the detector electronics will be more demanding. In particular, the high amount of radiation during the operation of the particle collider sets requirements for the electronics that are uncommon in commercial electronics. Electronics that are built to function in the challenging environment of the collider have been designed at CERN. In order to meet the future challenges of data transmission, a GigaBit Transceiver data transmission module and an E-Link data bus have been developed. The next generation of readout electronics is designed to benefit from these technologies. However, the current readout electronics chips are not compatible with these technologies. As a result, in addition to new Gas Electron Multiplier (GEM) detectors and other technology, a new compatible chip is developed to function within the GEMs for the Compact Muon Solenoid (CMS) project. In this thesis, the objective was to study a data transmission interface that will be located on the readout chip between the E-Link bus and the control logic of the chip. The function of the module is to handle data transmission between the chip and the E-Link. In the study, a model of the interface was implemented with the Verilog hardware description language. This process was simulated by using chip design software by Cadence. State machines and operating principles with alternative possibilities for implementation are introduced in the E-Link interface design procedure. The functionality of the designed logic is demonstrated in simulation results, in which the implemented model is proven to be suitable for its task. Finally, suggestions that should be considered for improving the design have been presented.

SCOAP3-projekti ja FinELib-konsortio

Arja Tuuliniemen esitys Asiantuntijaseminaarissa Helsingissä 13.2.2014.

Simulation of new p-type pixel strip detector with enhanced multiplication effect

This Master’s Thesis is dedicated to the simulation of new p-type pixel strip detector with enhanced multiplication effect. It is done for high-energy physics experiments upgrade such as Super Large Hadron Collider especially for Compact Muon Solenoid particle track silicon detectors. These detectors are used in very harsh radiation environment and should have good radiation hardness. The device engineering technology for developing more radiation hard particle detectors is used for minimizing the radiation degradation. New detector structure with enhanced multiplication effect is proposed in this work. There are studies of electric field and electric charge distribution of conventional and new p-type detector under reverse voltage bias and irradiation. Finally, the dependence of the anode current from the applied cathode reverse voltage bias under irradiation is obtained in this Thesis. For simulation Silvaco Technology Computer Aided Design software was used. Athena was used for creation of doping profiles and device structures and Atlas was used for getting electrical characteristics of the studied devices. The program codes for this software are represented in Appendixes.

OpenAIRE Guidelines for Literature Repositories, Data Archives and CRIS managers

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Towards multi bibliographic format support in Invenio

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Invenio as a Blog Archiving platform

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Multi-source ingestion of publisher articles - The SCOAP3 repository experience

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Targeted Annotation of Scientific Literature and Data Resources in Invenio Digital Libraries

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Integration of JINR Information Resources

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Invenio v2.0: A Pythonic Framework for Large-Scale Digital Libraries

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Invenio v2.0: A Pythonic Framework for Large-Scale Digital Libraries

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Recommendations for Preservation Data Policies

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014