Desarrollo de una bebida probiótica de Aloe perfoliata var. vera (Sabila) utilizando Lactobacillus casei shirota

Se desarrolló una bebida probiótica utilizando Aloe perfoliata var. vera (Sábila) y una cepa liofilizada de Lactobacillus casei shirota. a partir de la obtención del jugo de las hojas de la planta Aloe perfoliata var. vera (sábila); el cual se utilizó en proporciones 10% (50 mL), 15% (75 mL), 20% (100 mL); se le agregó Goma Xantan como estabilizante, Ácido Cítrico como regulador de la acidez, azúcar de caña sin refinar como edulcorante y agua purificada. Se procedió a pasteurizar la bebida, para la posterior incorporación del microrganismo estandarizado Lactobacillus casei shirota a la concentración de 107 UFC/mL. Se realizó la medición de los parámetros de pH y Grados Brix, y además la determinación de Escherichia coli al jugo de Aloe perfoliata var. vera (sábila) sin pasteurizar y pasteurizado; Así mismo se evaluó la estabilidad del microorganismo estandarizado Lactobacillus casei shirota a la concentración de 107 UFC/mL en el jugo de Aloe perfoliata var. vera, mediante recuento en placa en agar MRS, durante los periodos de 1, 2, 5, 8 y 15 días. Finalmente, se realizó la prueba sensorial de Análisis Descriptivo Cualitativo que se llevó a cabo con dos grupos de catadores, un grupo conformado 25 docentes y el otro por 25 estudiantes, a los cuales se les dió una muestra de 30 mL de la bebida para valorar las características sensoriales y la aceptabilidad de la bebida con relación al aspecto, color, olor, sabor (dulce, acido, residual), fluidez, grumosidad y calidad general. Tomando en cuenta del estudio estabilidad de Lactobacillus casei shirora en el jugo de Aloe perfoliata var. vera pasteurizado, se concluyó que la muestra que brinda mejor estabilidad al componente probiótico es la muestra 2. (15% de jugo de sábila) cuya de una concentración inicial de 7.00E+07 UFC/mL que se mantiene por espacio de 2 días con una concentración superior a 1.00E+06 UFC/mL, finalizando a los 15 días con 6.00E+07UFC/mL, alcanzando el requerimiento mínimo 106 necesario para que la bebida sea considerada como probiótica; además en la prueba sensorial del análisis descriptivo cuantitativo la muestra 2 (15% de jugo de sábila), presento una buena aceptabilidad, tanto en estudiantes como en docentes, ambos géneros; logrando obtener un resultado de calidad general aceptable; el tiempo de vida útil de la bebida preparada fue de 8 días, considerando tanto los valores de pH y Grados Brix que presentaron una disminución luego de transcurrido el octavo día de análisis.

Degradação do PMMA através da reação despolimerização uitlizando catalisadores de óxidos mistos

In this work, mixed oxides were synthesized by two methods: polymeric precursor and gel-combustion. The oxides, Niquelate of Lanthanum, Cobaltate of Lanthanum and Cuprate of Lanthanum were synthesized by the polymeric precursor method, and treated at 300 º C for 2 hours, calcined at 800 º C for 6h in air atmosphere. In gel-combustion method were produced and oxides using urea and citric acid as fuel, forming for each fuel the following oxides Ferrate of Lanthanum, Cobaltato of Lanthanum and Ferrato of Cobalt and Lanthanum, which were submitted to the combustion process assisted by microwave power maximum of 10min. The samples were characterized by: thermogravimetric analysis, X-ray diffraction; fisisorção of N2 (BET method) and scanning electron microscopy. The reactions catalytic of depolymerization of poly (methyl methacrylate), were performed in a reactor of silica, with catalytic and heating system equipped with a data acquisition system and the gas chromatograph. For the catalysts synthesized using the polymeric precursor method, the cuprate of lanthanum was best for the depolymerization of the recycled polymer, obtaining 100% conversion in less time 554 (min), and the pure polymer, was the Niquelate of Lanthanum, with 100% conversion in less time 314 (min). By gel-combustion method using urea as fuel which was the best result obtained Ferrate of Lanthanum for the pure polymer with 100% conversion in less time 657 (min), and the recycled polymer was Cobaltate of Lanthanum with 100 % conversion in less time 779 (min). And using citric acid to obtain the best result for the pure polymer, was Ferrate of Lanthanum with 100% conversion in less time 821 (min and) for the recycled polymer, was Ferrate of Lanthanum with 98.28% conversion in less time 635 (min)

Síntese de pigmentos cerâmicos inorgânicos nanométricos e encapsulados com estrutura core-shell pela rota dos precursores poliméricos

The present work has as objective the development of ceramic pigments based in iron oxides and cobalt through the polymeric precursor method, as well as study their characteristics and properties using methods of physical, chemical, morphological and optical characterizations.In this work was used iron nitrate, and cobalt citrate as precursor and nanometer silica as a matrix. The synthesis was based on dissolving the citric acid as complexing agent, addition of metal oxides, such as chromophores ions and polymerization with ethylene glycol. The powder obtained has undergone pre-ignition, breakdown and thermal treatments at different calcination temperatures (700 °C, 800 °C, 900 °C, 1000 °C and 1100 °C). Thermogravimetric analyzes were performed (BT) and Differential Thermal Analysis (DTA), in order to evaluate the term decomposition of samples, beyond characterization by techniques such as BET, which classified as microporous materials samples calcined at 700 ° C, 800 º C and 900 º C and non-porous when annealed at 1000 ° C and 1100 º C, X-ray diffraction (XRD), which identified the formation of two crystalline phases, the Cobalt Ferrite (CoFe2O4) and Cristobalite (SiO2), Scanning Electron Microscopy (SEM) revealed the formation of agglomerates of particles slightly rounded;and Analysis of Colorimetry, temperature of 700 °C, 800 °C and 900 °C showed a brown color and 1000 °C and 1100 °C violet

Otimização do processo de síntese do aluminato de cobalto via método de polimerização de complexos (MPC) através do planejamento fatorial fracionado

In the ceramics industry are becoming more predominantly inorganic nature pigments. Studies in this area allow you to develop pigments with more advanced properties and qualities to be used in the industrial context. Studies on synthesis and characterization of cobalt aluminate has been widely researched, cobalt aluminate behavior at different temperatures of calcinations, highlighting especially the temperatures of 700, 800 and 900° C that served as a basis in the development of this study, using the method of polymerization of complex (CPM), economic, and this method applied in ceramic pigment synthesis. The procedure was developed from a fractional factorial design 2 (5-2) in order to optimize the process of realization of the cobalt aluminate (CoAl2O4), having as response surfaces the batch analysis data of Uv-vis spectroscopy conducted from the statistic software 7.0, for this were chosen five factors as input variables: citric acid (stoichiometric manner), puff or pyrolysis time (h), temperature (° C), and calcinations (° C/min), at levels determined for this study. By applying statistics in the process of obtaining the CoAl2O4 is possible the study of these factors and which may have greater influence in getting the synthesis. The pigments characterized TG/DSC analyses, and x-ray diffraction (XRD) and scanning electron microscope (SEM/EDS) in order to establish the structural and morphological aspects of pigment CoAl2O4, among the factors studied it were found to statically with increasing calcinations temperature 700°< 800 <900 °C, the bands of Uv-vis decrease with increasing intensity of absorbance and that with increasing time of puff or pyrolysis (h) there is an increase in bands of Uv-vis proportionally, the generated model set for the conditions proposed in this study because the coefficient of determination can explain about 99.9% of the variance (R²), response surfaces generated were satisfactory, so it s possible applicability in the ceramics industry of pigments

Caracterização microestrutural e elétrica de La(FexNi1-x)O3 sintetizado pelo método da gelatina

The present work deals with the synthesis of materials with perovskite structure with the intention of using them as cathodes in fuel cells SOFC type. The perovskite type materials were obtained by chemical synthesis method, using gelatin as the substituent of citric acid and ethylene glycol, and polymerizing acting as chelating agent. The materials were characterized by X-ray diffraction, thermal analysis, spectroscopy Fourier transform infrared, scanning electron microscopy with EDS, surface area determination by the BET method and Term Reduction Program, TPR. The compounds were also characterized by electrical conductivity for the purpose of observing the possible application of this material as a cathode for fuel cells, solid oxide SOFC. The method using gelatin and polymerizing chelating agent for the preparation of materials with the perovskite structure allows the synthesis of crystalline materials and homogeneous. The results demonstrate that the route adopted to obtain materials were effective. The distorted perovskite structure have obtained the type orthorhombic and rhombohedral; important for fuel cell cathodes. The presentation material properties required of a candidate cathode materials for fuel cells. XRD analysis contacted by the distortion of the structures of the synthesized materials. The analyzes show that the electrical conductivity obtained materials have the potential to act as a cell to the cathode of solid oxide fuel, allowing to infer an order of values for the electrical conductivities of perovskites where LaFeO3 < LaNiO3 < LaNi0,5Fe0,5O3. It can be concluded that the activity of these perovskites is due to the presence of structural defects generated that depend on the method of synthesis and the subsequent heat treatment

Síntese de pigmento cerâmico ferrita de cobalto utilizando planejamento experimental

Synthetic inorganic pigments are the most widely used in ceramic applications because they have excellent chemical and thermal stability and also, in general, a lower toxicity to man and to the environment. In the present work, the ceramic black pigment CoFe2O4 was synthesized by the polymerization Complex method (MPC) in order to form a material with good chemical homogeneity. Aiming to optimize the process of getting the pigment through the MPC was used a fractional factorial design 2(5-2), with resolution III. The factors studied in mathematical models were: citric acid concentration, the pyrolysis time, temperature, time and rate of calcination. The response surfaces using the software statistica 7.0. The powders were characterized by thermal analysis (TG/DSC), x-ray diffraction (XRD), scanning electron microscopy (SEM) and spectroscopy in the UV-visible. Based on the results, there was the formation of phase cobalt ferrite (CoFe2O4) with spinel structure. The color of the pigments obtained showed dark shades, from black to gray. The model chosen was appropriate since proved to be adjusted and predictive. Planning also showed that all factors were significant, with a confidence level of 95%

Dinâmica de íons em solo ácido lixiviado com extratos de resíduos de adubos verdes e soluções puras de ácidos orgânicos

A influência da aplicação de resíduos vegetais na dinâmica de íons em solos ácidos é pouco conhecida. Neste estudo, a mobilidade de íons em amostra do horizonte Bw de um Latossolo Vermelho-Escuro álico lixiviado com soluções puras de ácidos cítrico e succínico e extratos aquosos de resíduos de nabo forrageiro (Raphanus sativus) e aveia-preta (Avena strigosa) foi avaliada em colunas de solo (5, 10, 20 e 40 cm de altura por 4 cm de diâmetro). Após a percolação das soluções e extratos pelas colunas de solo determinaram-se, nas soluções efluentes, os teores de Ca (Ca s), Mg (Mg s), K (Ks), Al total (Al st), orgânico (Al so), monomérico (Al sm) e carbono orgânico dissolvido. No solo, foram determinados os teores trocáveis de Ca (Ca tr), Mg (Mg tr), K (Ktr) e Al (Al tr) e o pH (CaCl2). Os ácidos cítrico e succínico aumentaram os teores de Al st e Ca s, respectivamente, causando reduções nas frações trocáveis desses elementos no solo. O extrato de aveia-preta foi mais efetivo na remoção do Ca tr e o de nabo forrageiro na do Al tr. O decréscimo de Ca tr e Al tr foi seguido do aumento do Ktr. A formação de complexos entre Ca s e Al tr com compostos orgânicos de baixo peso molecular foi sugerida como o provável mecanismo responsável pela mobilidade dos íons polivalentes no subsolo de solos ácidos após a aplicação dos extratos de resíduos vegetais e das soluções puras de ácidos orgânicos.

Caracterização física e química dos frutos nos diferentes quadrantes da planta e germinação de sementes do portaenxerto cítrico tangerineira ‘sunki’

The tangerine 'Sunki' are highly relevant for the Brazilian citrus industry by presenting important traits for genetic improvement and to be considered a great portaenxento. In this context, the objective of the present work to study the characterization of the fruits of citrus rootstock 'Sunki', depending on the position on the plan and also the germination of their seeds. The physical characteristics evaluated were fruit weight, longitudinal and equatorial diameters of the fruit longitudinal diameter / equatorial diameter, number of buds per fruit, weight of buds and bark and number of viable seeds per fruit. As for the chemical characterization was evaluated titratable, acidity, soluble solid, "Ratio", pH and vitamin C. For the evaluation of these variables, the fruits were obtained from the northeast, southwest, northwest and southeast quadrants. Regarding the evaluation of seed germination, different doses of gibberellic acid and Stimulate were used. The seeds extracted from ripe fruit, washed, dried in the shade and stored in BOD. Immediately after, they were treated for 24 hours with plant growth regulators. After soaking, the seeds were placed in a germinator in germitest paper. After initiation of the germination process, the evaluations were performed daily until the thirty- fourth day. Fruits of 'Sunki'mandarin with uneven as the fruit position within the canopy, the use of gibberellic acid and growth promoter is promising for commercial use on seed germination of this rootstock.

Composição química e qualidade microbiológica de silagens ácidas de vísceras de surubim (Pseudoplatystoma spp.) preparadas com diferentes proporções de ácidos fórmico e cítrico.

2015

Metodologia analítica para determinação de folatos e ácido fólico em alimentos

The aim of this work was to develop and to validate a methodology using HPLC for the simultaneous determination of folates and folic acid in foods. The limits of detection and the recovery rates for the vitamins in the certified reference materials were respectively 5 pg/mL and 94-108% for 5-MTHF, 7 pg/mL and 97-102% for THF, 30 pg/mL and 97.9-104% for 5-FTHF, 30 pg/mL and 95-107 for 10-FFA, 5 ng/mL and 97-102% for FA and 5 ng/mL and 98-103% for 10-MFA. Repeatability showed a coefficient of variation below 3.9% for all the vitamins. The proposed methodology was shown to be efficient when applied to different certified reference materials, namely pig's liver (BCR487), powdered milk (BCR421) and a vegetable mixture (BCR485).

Determinação espectrofotométrica de hexametilenotetramina (HMT) em medicamentos, utilizando ácido cromotrópico e forno de micro-ondas

This paper proposes a methodology for spectrophotometric determination of hexamethylenetetramine (HMT) by using chromotropic acid in a phosphoric acid media employing a domestic microwave oven as a source of heating. The reddish-purple soluble product is quantitatively formed after 30 s of irradiation and obeys the Beer´s law in the range between 0.1-1.2 mg L-1 HMT (r = 0.99925). The method was applied successfully in commercial pharmaceutical preparations containing dyes in their composition. The results showed that the method proposed is feasible for simplicity, speed, low cost, precision and accuracy when compared with United States Pharmacopeia official method.

Estudo inicial da degradação in vivo de poli(L-co-D,L ácido lático), sintetizado em laboratório, aplicado como prótese tibial em coelhos

The copolymer poly (L-co-D,L lactic acid), PLDLA, has gained prominence in the field of temporary prostheses due to the fact that their time of degradation is quite compatible with the requirement in the case of osseous fracture. In this work the in vivo degradation of devices from copolymer, as a system of plates and screws, used in fixation of the tibia of rabbits was studied. The devices were implanted in 15 adult rabbits, albinos, New Zealand race, and they were used as control devices of alloys of titanium (Ti-6Al-4V/ V grade). The use of copolymers, synthesized in the laboratory, was tested in the repair of fracture in rabbits'tibias, being assessed in the following times: 2 weeks, 2 months and 3 months. Morphological analysis of tissue surrounding the plate and screw system, for 2 weeks of implantation, showed the presence of osteoblasts, indicating a pre bone formation. After 2 months there was new bone formation in the region in contact with the polymer. This bone growth occurred simultaneously with the process of PLDLA degradation, invading the region where there was polymer and after 3 months there was an intense degradation of the copolymer and hence greater tissue invasion compared to 2 months which characterized bone formation in a region where the polymer degraded. The in vivo degradation study of the devices for PLDLA by means of histological evaluations during the period of consolidation of the fracture showed the efficiency of plate and screw system, and it was possible to check formation of bone tissue at the implantation site, without the presence of inflammatory reaction

Aplicações oftalmológicas do ácido hialurônico

Hyaluronic acid is a polysaccharide of the glycosaminoglycan family present in mammal tissues. In the eye, it can be found in the cornea, the sclera and the vitreous humor. Currently, it has been employed in several medical specialties, including ophthalmology. The objective of this paper is to demonstrate the various current and future ophthalmic applications of this substance.

Desempenho e estado ácido-base sanguíneo em corredores de 10 km submetidos a corridas em diferentes intensidades contantes

Universidade Estadual de Campinas. Faculdade de Educação Física

Uso de ácido benzoico na dieta de leitões

Um experimento foi conduzido com o objetivo de avaliar os efeitos da inclusão de ácido benzoico (Vevovitall®) na dieta sobre o desempenho e a morfologia intestinal do duodeno de leitões de 28 a 70 dias de idade. Foram utilizados 160 leitões Dalland × Penarlan desmamados aos 21 dias de idade, separados por sexo. O experimento foi dividido em fases pré-inicial 1 (28 a 35 dias de idade), pré-inicial 2 (36 a 46 dias de idade) e fase inicial (47 a 70 dias idade). Utilizou-se o delineamento experimental tipo blocos ao acaso com 5 tratamentos, cada um com 8 repetições de 4 animais, totalizando 40 unidades experimentais. Foram utilizados quatro níveis de ácido benzoico (0; 0,25; 0,50 e 0,75%) e um tratamento testemunha com ácido fumárico. Abateram-se, aos 70 dias de idade, dois animais por repetição para coleta de amostras do duodeno e estudo da morfologia intestinal e um animal por repetição para estudo de lesões gástricas. Foram avaliadas as características de desempenho (ganho de peso, consumo de ração e conversão alimentar) para cada fase e para o período total. Como características morfológicas, foram avaliadas a altura das vilosidades, a profundidade de criptas e a relação altura de vilosidades/profundidade de criptas. Avaliou-se ainda a incidência de diarreia. No período de 28 a 70 dias, o uso de ácido benzoico influencia o desempenho de suínos, que neste estudo foi melhor os níveis de 0,50 e 0,75%, e reduz a incidência de diarreia. Animais alimentados com dietas contendo ácido benzoico apresentam maior altura de vilosidade e profundidade de criptas.