945 resultados para temporal and spatial renderings
Resumo:
Owing to the fact that low-Mg calcite fossil shells are so important in paleoceanographic research, 249 brachiopod, cement and matrix specimens from two neighboring localities (Jemez Springs and Battleship Rock), of the Upper Pennsylvanian Madera Formation were analyzed. Of which, about 86% of the Madera brachiopods are preserved in their pristine mineralogy, microstructure and geochemistry. Cement and matrix samples, in contrast, have been subjected to complete but variable post-deposition~1 alteration. It is confirmed that the stable isotope data of brachiopods are much better than that of matrix material in defining depositional parameters. Because there is no uniform or constant relationship between the two data bases (e.g., from 0.1 to 3.0%0 for 0180 and from 0.2 to 6.7%0 for 013C in this study), it is not possible to make corrections for the matrix data. Regarding the two stratigraphic sections, elemental and petrographic analyses suggest that Jemez Springs is closer to Penasco Uplift than Battleship Rock. Seawater at Jemez Springs is more aerobic, and the water chemistry is more influenced by continental sources than that at Battleship Rock. In addition, there is a relatively stronger dolomitization in the mid-section of the Battleship Rock. Results further suggest that no significant biogenic fractionation or vital effects occurred during their shell secretion, suggesting that the Madera brachiopods incorporated oxygen and carbon isotopes in equilibrium with the ambient seawater. This conclusion is not only drawn from the temporal and spatial analyses, but also supported by brachiopod inter-generic comparison (Composita and Neospirifer) and statistical analysis ( t-test).
Resumo:
The present study was carried out to test the hypothesis that photosynthetic bacteria contribute a large portion of the food of filter feeding zooplankton populations in Crawford Lake, Ontario. The temporal and spatial variations of both groups of organisms are strongly dependent on one another. 14 By using C-Iabelled photosynthetic bacteria. the ingestion and clearance rates of Daphnia pulex, ~. rosea, and Keratella spp were estimated during summer and fall of 1982. These quantitative estimations of zooplankton ingestion and clearence rates on photosynthetic bacteria comprised an original addition to the literature. Photosynthetic bacteria comprised a substantial portion of the diet of all four dominant zooplankton species. The evidence for this is based on the ingestion and clearance rates of the dominant zooplankton species. Ingestion rates of D. pulex and D. rosea ranged 5 5 -1 -1 - -- 5 - -- 5 from 8.3X10 -1 to 14.6XlO -1 cells.ind. hr and 8.1X10 to 13.9X10 cells.ind. hr • Their clearance rates ranged from 0.400 to 1.000 -1 -1 -1 -1 ml.ind. hr. and 0.380 to 0.930 ml.ind. hr • The ingestion and clearance -1 -1 -1 -1 rates of Keratella spp were 600 cell.ind. hr and 0.40 ul.ind. hr respectively. Clearance rates were inversely proportional to the concentration of food cells and directly proportional to the body size of the animals. It is believed that despite the very short reg~neration times of photosynthetic bacteria (3-8 hours) their population densities were controlled in part by the feeding rates of the dominant zooplankton in Crawford Lake. By considering the regeneration times of photosynthetic bacteria and the population clearance rates of zooplankton, it was estimated that between 16 to 52% and 11 to 35% of the PHotosynthetic bacteria were' consumed· by Daphnia· pulex. and Q.. rosea per day. The temporal and spatial distribution of Daphnia pulex, !.. rosea, Keratella quadrata, K. coChlearis and photosynthetic bacteria in Crawford Lake were also investigated during the period of October, 1981 to December, 1982. The photosynthetic bacteria in the lake, constituted a major food source for only those zooplankton Which tolerate anaerobic conditions. Changes in temperature and food appeared to correlate with the seasonal changes in zooplankton density. All four dominant species of zooplankton were abundant at the lake's surface (O-4m) during winter and spring and moved downwards with the thermocline as summer stratification proceeded. Photosynthetic bacteria formed a 2 m thick layer at the chemocline. The position of this photosynthetic bacterial J-ayer changed seasonally. In the summer, the bacterial plate moved upwards and following fall mixing it moved downwards. A vertical shift of O.8m (14.5 to 15.3m) was recorded during the period of June to December. The upper limit of the photosynthetic bacteria in the water column was controlled by dissolved oxygen, and sulfide concentrations While their lower limit was controlled by light intensity. A maximum bacterio- 1 chlorophyll concentration of 81 mg Bchl.l was recorded on August 9, 1981. The seasonal distribution of photosynthetic bacteria was controlledinpart' by ·theg.-"z1ai'_.Q;~.zoopl. ank:tCm;-.Qther -ciactors associated with zooplankton grazing were oxygen and sulfide concentrations.
Resumo:
An exemination of a series of indicators of economic integration in the western hemisphere (Canada-USA-Latin America) indicates that it is proceeding under the influence of formal trade agreements and informal forces including technological change, multinational firm rationalization and location strategies, etc.
Resumo:
This paper generalizes Hotelling's (1931) theory of nonrenewable resources to situations where resource pools and their users are distributed spacially. Extraction and transport costs are assumed to be linear in the rate of extraction, but utilization of each deposit may require a setup cost.
Resumo:
La présente thèse examine les liens entre le sommeil, la mémoire épisodique et les rêves. Dans une première étude, nous utilisons les technologies de la réalité virtuelle (RV) en liaison avec un paradigme de privation de sommeil paradoxal et de collecte de rêve en vue d'examiner l'hypothèse que le sommeil paradoxal et le rêve sont impliqués dans la consolidation de la mémoire épisodique. Le sommeil paradoxal a été associé au rappel des aspects spatiaux des éléments émotionnels de la tâche RV. De la même façon, l'incorporation de la tâche RV dans les rêves a été associée au rappel des aspects spatiaux de la tâche. De plus, le rappel des aspects factuels et perceptuels de la mémoire épisodique, formé lors de la tâche VR, a été associé au sommeil aux ondes lentes. Une deuxième étude examine l'hypothèse selon laquelle une fonction possible du rêve pourrait être de créer de nouvelles associations entre les éléments de divers souvenirs épisodiques. Un participant a été réveillé 43 fois lors de l'endormissement pour fournir des rapports détaillés de rêves. Les résultats suggèrent qu'un seul rêve peut comporter, dans un même contexte spatiotemporel, divers éléments appartenant aux multiples souvenirs épisodiques. Une troisième étude aborde la question de la cognition lors du sommeil paradoxal, notamment comment les aspects bizarres des rêves, qui sont formés grâce aux nouvelles combinaisons d'éléments de la mémoire épisodique, sont perçus par le rêveur. Les résultats démontrent une dissociation dans les capacités cognitives en sommeil paradoxal caractérisée par un déficit sélectif dans l'appréciation des éléments bizarres des rêves. Les résultats des quatre études suggèrent que le sommeil aux ondes lentes et le sommeil paradoxal sont différemment impliqués dans le traitement de la mémoire épisodique. Le sommeil aux ondes lentes pourrait être implique dans la consolidation de la mémoire épisodique, et le sommeil paradoxal, par l'entremise du rêve, pourrais avoir le rôle d'introduire de la flexibilité dans ce système mnémonique.
Resumo:
Après des décennies de développement, l'ablation laser est devenue une technique importante pour un grand nombre d'applications telles que le dépôt de couches minces, la synthèse de nanoparticules, le micro-usinage, l’analyse chimique, etc. Des études expérimentales ainsi que théoriques ont été menées pour comprendre les mécanismes physiques fondamentaux mis en jeu pendant l'ablation et pour déterminer l’effet de la longueur d'onde, de la durée d'impulsion, de la nature de gaz ambiant et du matériau de la cible. La présente thèse décrit et examine l'importance relative des mécanismes physiques qui influencent les caractéristiques des plasmas d’aluminium induits par laser. Le cadre général de cette recherche forme une étude approfondie de l'interaction entre la dynamique de la plume-plasma et l’atmosphère gazeuse dans laquelle elle se développe. Ceci a été réalisé par imagerie résolue temporellement et spatialement de la plume du plasma en termes d'intensité spectrale, de densité électronique et de température d'excitation dans différentes atmosphères de gaz inertes tel que l’Ar et l’He et réactifs tel que le N2 et ce à des pressions s’étendant de 10‾7 Torr (vide) jusqu’à 760 Torr (pression atmosphérique). Nos résultats montrent que l'intensité d'émission de plasma dépend généralement de la nature de gaz et qu’elle est fortement affectée par sa pression. En outre, pour un délai temporel donné par rapport à l'impulsion laser, la densité électronique ainsi que la température augmentent avec la pression de gaz, ce qui peut être attribué au confinement inertiel du plasma. De plus, on observe que la densité électronique est maximale à proximité de la surface de la cible où le laser est focalisé et qu’elle diminue en s’éloignant (axialement et radialement) de cette position. Malgré la variation axiale importante de la température le long du plasma, on trouve que sa variation radiale est négligeable. La densité électronique et la température ont été trouvées maximales lorsque le gaz est de l’argon et minimales pour l’hélium, tandis que les valeurs sont intermédiaires dans le cas de l’azote. Ceci tient surtout aux propriétés physiques et chimiques du gaz telles que la masse des espèces, leur énergie d'excitation et d'ionisation, la conductivité thermique et la réactivité chimique. L'expansion de la plume du plasma a été étudiée par imagerie résolue spatio-temporellement. Les résultats montrent que la nature de gaz n’affecte pas la dynamique de la plume pour des pressions inférieures à 20 Torr et pour un délai temporel inférieur à 200 ns. Cependant, pour des pressions supérieures à 20 Torr, l'effet de la nature du gaz devient important et la plume la plus courte est obtenue lorsque la masse des espèces du gaz est élevée et lorsque sa conductivité thermique est relativement faible. Ces résultats sont confirmés par la mesure de temps de vol de l’ion Al+ émettant à 281,6 nm. D’autre part, on trouve que la vitesse de propagation des ions d’aluminium est bien définie juste après l’ablation et près de la surface de la cible. Toutefois, pour un délai temporel important, les ions, en traversant la plume, se thermalisent grâce aux collisions avec les espèces du plasma et du gaz.
Resumo:
La révision du code est un procédé essentiel quelque soit la maturité d'un projet; elle cherche à évaluer la contribution apportée par le code soumis par les développeurs. En principe, la révision du code améliore la qualité des changements de code (patches) avant qu'ils ne soient validés dans le repertoire maître du projet. En pratique, l'exécution de ce procédé n'exclu pas la possibilité que certains bugs passent inaperçus. Dans ce document, nous présentons une étude empirique enquétant la révision du code d'un grand projet open source. Nous investissons les relations entre les inspections des reviewers et les facteurs, sur les plans personnel et temporel, qui pourraient affecter la qualité de telles inspections.Premiérement, nous relatons une étude quantitative dans laquelle nous utilisons l'algorithme SSZ pour détecter les modifications et les changements de code favorisant la création de bogues (bug-inducing changes) que nous avons lié avec l'information contenue dans les révisions de code (code review information) extraites du systéme de traçage des erreurs (issue tracking system). Nous avons découvert que les raisons pour lesquelles les réviseurs manquent certains bogues était corrélées autant à leurs caractéristiques personnelles qu'aux propriétés techniques des corrections en cours de revue. Ensuite, nous relatons une étude qualitative invitant les développeurs de chez Mozilla à nous donner leur opinion concernant les attributs favorables à la bonne formulation d'une révision de code. Les résultats de notre sondage suggèrent que les développeurs considèrent les aspects techniques (taille de la correction, nombre de chunks et de modules) autant que les caractéristiques personnelles (l'expérience et review queue) comme des facteurs influant fortement la qualité des revues de code.
Resumo:
Global Positioning System (GPS), with its high integrity, continuous availability and reliability, revolutionized the navigation system based on radio ranging. With four or more GPS satellites in view, a GPS receiver can find its location anywhere over the globe with accuracy of few meters. High accuracy - within centimeters, or even millimeters is achievable by correcting the GPS signal with external augmentation system. The use of satellite for critical application like navigation has become a reality through the development of these augmentation systems (like W AAS, SDCM, and EGNOS, etc.) with a primary objective of providing essential integrity information needed for navigation service in their respective regions. Apart from these, many countries have initiated developing space-based regional augmentation systems like GAGAN and IRNSS of India, MSAS and QZSS of Japan, COMPASS of China, etc. In future, these regional systems will operate simultaneously and emerge as a Global Navigation Satellite System or GNSS to support a broad range of activities in the global navigation sector.Among different types of error sources in the GPS precise positioning, the propagation delay due to the atmospheric refraction is a limiting factor on the achievable accuracy using this system. The WADGPS, aimed for accurate positioning over a large area though broadcasts different errors involved in GPS ranging including ionosphere and troposphere errors, due to the large temporal and spatial variations in different atmospheric parameters especially in lower atmosphere (troposphere), the use of these broadcasted tropospheric corrections are not sufficiently accurate. This necessitated the estimation of tropospheric error based on realistic values of tropospheric refractivity. Presently available methodologies for the estimation of tropospheric delay are mostly based on the atmospheric data and GPS measurements from the mid-latitude regions, where the atmospheric conditions are significantly different from that over the tropics. No such attempts were made over the tropics. In a practical approach when the measured atmospheric parameters are not available analytical models evolved using data from mid-latitudes for this purpose alone can be used. The major drawback of these existing models is that it neglects the seasonal variation of the atmospheric parameters at stations near the equator. At tropics the model underestimates the delay in quite a few occasions. In this context, the present study is afirst and major step towards the development of models for tropospheric delay over the Indian region which is a prime requisite for future space based navigation program (GAGAN and IRNSS). Apart from the models based on the measured surface parameters, a region specific model which does not require any measured atmospheric parameter as input, but depends on latitude and day of the year was developed for the tropical region with emphasis on Indian sector.Large variability of atmospheric water vapor content in short spatial and/or temporal scales makes its measurement rather involved and expensive. A local network of GPS receivers is an effective tool for water vapor remote sensing over the land. This recently developed technique proves to be an effective tool for measuring PW. The potential of using GPS to estimate water vapor in the atmosphere at all-weather condition and with high temporal resolution is attempted. This will be useful for retrieving columnar water vapor from ground based GPS data. A good network of GPS could be a major source of water vapor information for Numerical Weather Prediction models and could act as surrogate to the data gap in microwave remote sensing for water vapor over land.
Resumo:
This is an empirical study with theoretical interpretation and elaboration simultaneously on the migration process and the related spatial development in contemporary China. In so doing, there is always a combination of series of studies of the modernization of the migrants themselves with accumulation of forms of capital and changes of lebenswelt (life world) as well as the regions of their origins by the effective use of the gained resources from outgoing migration and remigration. With great efforts made to put the issues together for analysis, the author has taken three approaches to the study based on the political and economic institutional arrangements, the field work data and the elaboration of respective findings. First, as the analytical parts of the institutional changes, which have gone through the whole research, many of the policies from state level to townships involved in the migration, remigration and spatial development have been interpreted with Chinese political and cultural insight. The making of these, as the means of understanding the contexts of macro level and micro level cases is served as key linkages between scholarly imagination and social reality. Indeed most of the discussions made to explain the phenomena such as the sudden upsurge of migration flows, the emergence of three generations, the strong and weak trends of remigration as well as the related spatial development planning, etc are mainly due to the domination, at least the impact of governments decision-making in spite of growing market functioning in often operative manners. Secondly, case studies of the effects of migration and remigration are carried out between the years of 1995 and 2005 in the costal urban regions as designations and the interior rural regions as origins. Conducted mainly by the author, the cases drawn in the research focus on the process of migration with an accumulation of forms of capital away from home and the effective use of the resources flowing back to home areas. As a result, ways of accumulation and utilization of the economic, social and cultural capital are described and interpreted in terms of the development and modernization of both the migrants themselves and the regions where they come out from or move to in the future. Thirdly, in accordance with the findings generated from the cases, the author proposes in the final chapter an important argumentation as conclusion that the duel social-economic structure will inevitably be broken up and reformulated with flows of migrants and forms of capital they possess as types of future spatial development that will be put into practice. With scenarios and all the other conclusions worked out in the end, the research concludes that the pluralistic spatial development in the condition of constant space flows between regions can be a decisive line of thinking in the process of urbanization, industrialization and modernization in the long run in the future. Since this is an exploratory study of the past and present, the author has left some space open for academic debates and put forward suggestions on the inclusion of future research before implementing policies necessary for migration associated spatial practice and development.
Resumo:
It can be assumed that the composition of Mercury’s thin gas envelope (exosphere) is related to the composition of the planets crustal materials. If this relationship is true, then inferences regarding the bulk chemistry of the planet might be made from a thorough exospheric study. The most vexing of all unsolved problems is the uncertainty in the source of each component. Historically, it has been believed that H and He come primarily from the solar wind, while Na and K originate from volatilized materials partitioned between Mercury’s crust and meteoritic impactors. The processes that eject atoms and molecules into the exosphere of Mercury are generally considered to be thermal vaporization, photonstimulated desorption (PSD), impact vaporization, and ion sputtering. Each of these processes has its own temporal and spatial dependence. The exosphere is strongly influenced by Mercury’s highly elliptical orbit and rapid orbital speed. As a consequence the surface undergoes large fluctuations in temperature and experiences differences of insolation with longitude. We will discuss these processes but focus more on the expected surface composition and solar wind particle sputtering which releases material like Ca and other elements from the surface minerals and discuss the relevance of composition modelling
Resumo:
Resumen tomado de la publicaci??n
Resumo:
We look at at the empirical validity of Schelling’s models for racial residential segregation applied to the case of Chicago. Most of the empirical literature has focused exclusively the single neighborhood model, also known as the tipping point model and neglected a multineighborhood approach or a unified approach. The multi-neighborhood approach introduced spatial interaction across the neighborhoods, in particular we look at spatial interaction across neighborhoods sharing a border. An initial exploration of the data indicates that spatial contiguity might be relevant to properly analyse the so call tipping phenomena of predominately non-Hispanic white neighborhoods to predominantly minority neighborhoods within a decade. We introduce an econometric model that combines an approach to estimate tipping point using threshold effects and a spatial autoregressive model. The estimation results from the model disputes the existence of a tipping point, that is a discontinuous change in the rate of growth of the non-Hispanic white population due to a small increase in the minority share of the neighborhood. In addition we find that racial distance between the neighborhood of interest and it surrounding neighborhoods has an important effect on the dynamics of racial segregation in Chicago.
Resumo:
El libro presenta un conjunto de tests de aptitud (para medir el potencial de éxito de una persona) y tests de inteligencia normalizados, cada vez más utilizados en procesos de contratación, selección y evaluación de personal. Organizados en cuatro apartados, tests de aptitud verbal, espacial, numérica y tests de inteligencia, permiten trabajar distintas áreas (significado de palabras, gramática y comprensión, aptitud verbal avanzada, análisis lógico, cálculo mental, secuencias numéricas y problemas numéricos) para mejorar las habilidades verbales, numéricas y de razonamiento del lector.
Resumo:
Resumen basado en el de la publicaci??n
Resumo:
As part of the European Commission (EC)'s revision of the Sewage Sludge Directive and the development of a Biowaste Directive, there was recognition of the difficulty of comparing data from Member States (MSs) because of differences in sampling and analytical procedures. The 'HORIZONTAL' initiative, funded by the EC and MSs, seeks to address these differences in approach and to produce standardised procedures in the form of CEN standards. This article is a preliminary investigation into aspects of the sampling of biosolids, composts and soils to which there is a history of biosolid application. The article provides information on the measurement uncertainty associated with sampling from heaps, large bags and pipes and soils in the landscape under a limited set of conditions, using sampling approaches in space and time and sample numbers based on procedures widely used in the relevant industries and when sampling similar materials. These preliminary results suggest that considerably more information is required before the appropriate sample design, optimum number of samples, number of samples comprising a composite, and temporal and spatial frequency of sampling might be recommended to achieve consistent results of a high level of precision and confidence. (C) 2004 Elsevier Ltd. All rights reserved.