Social dynamics for sustainable food systems : Actors' orientations towards sustainability in primary production and public consumption

The modern food system and sustainable development form a conceptual combination that suggests sustainability deficits in environmental impacts and nutritional status of western populations. This study explores actors orientations towards sustainability by probing into social dynamics for sustainability within primary production and public consumption. If actors within these two worlds were to express converging orientations for sustainability, the system dynamics of the market would enable more sustainable growth in terms of production dictated by consumption. The study is based on a constructivist research approach with qualitative text analyses. The findings were validated by internal and external food system actors and are suggested to represent current social dynamics within Finnish food system. The key findings included primary producers social skilfulness, which enabled networking with other actors in very different paths of life, learning in order to promote one s trade, and trusting reflectively in partners in order to expand business. These activities extended the supply chain in a spiral fashion by horizontal and vertical forward integration, until large retailers were met for negotiations on a more equal basis. This mode of chain level coordination, typically building around the core of social and partnership relations, was coined as a socially overlaid network, and seen as sustainable coordination mode for endogenous growth. The caterers exhibited more or less committed professional identity for sustainability within their reach. The facilitating approaches for professional identities dealt successfully with local and organic food in addition to domestic food, and also imported food. The co-operation with supply chains created innovative solutions and savings for the business parties to be shared. There were also more complicated identities as juggling, critical and delimited approaches for sustainability, with less productive efforts due to restrictions such as absence of organisational sustainability strategy, weak presence of local and organic suppliers, limited understanding about sustainability and no organisational resources for informed choices for sustainability. The convergence between producers and caterers existed to an extent allowing suggestion that increased clarity about sustainable consumption and production by actors could be constructed using advanced tools. The study looks for introduction of more profound environmental and socio-economic knowledge through participatory research with supply chain actors. Learning in the workplace about food system reality in terms of supply chain co-operation may prove to be a change engine that leads to advanced network operations and a more sustainable food system.

Do Households Have Rational Expectations on Future Consumption? Evidence from the Finnish Consumer Survey

Ever since its initial introduction some fifty years ago, the rational expectations paradigm has dominated the way economic theory handles uncertainty. The main assertion made by John F. Muth (1961), seen by many as the father of the paradigm, is that expectations of rational economic agents should essentially be equal to the predictions of relevant economic theory, since rational agents should use information available to them in an optimal way. This assumption often has important consequences on the results and interpretations of the models where it is applied. Although the rational expectations assumption can be applied to virtually any economic theory, the focus in this thesis is on macroeconomic theories of consumption, especially the Rational Expectations–Permanent Income Hypothesis proposed by Robert E. Hall in 1978. The much-debated theory suggests that, assuming that agents have rational expectations on their future income, consumption decisions should follow a random walk, and the best forecast of future consumption level is the current consumption level. Then, changes in consumption are unforecastable. This thesis constructs an empirical test for the Rational Expectations–Permanent Income Hypothesis using Finnish Consumer Survey data as well as various Finnish macroeconomic data. The data sample covers the years 1995–2010. Consumer survey data may be interpreted to directly represent household expectations, which makes it an interesting tool for this particular test. The variable to be predicted is the growth of total household consumption expenditure. The main empirical result is that the Consumer Confidence Index (CCI), a balance figure computed from the most important consumer survey responses, does have statistically significant predictive power over the change in total consumption expenditure. The history of consumption expenditure growth itself, however, fails to predict its own future values. This indicates that the CCI contains some information that the history of consumption decisions does not, and that the consumption decisions are not optimal in the theoretical context. However, when conditioned on various macroeconomic variables, the CCI loses its predictive ability. This finding suggests that the index is merely a (partial) summary of macroeconomic information, and does not contain any significant private information on consumption intentions of households not directly deductible from the objective economic variables. In conclusion, the Rational Expectations–Permanent Income Hypothesis is strongly rejected by the empirical results in this thesis. This result is in accordance with most earlier studies conducted on the topic.

Luotettavaa tietoa ja merkityksellisiä valintoja – Kuluttajien ympäristövastuullista järkeilyä ilmastonmuutoksesta ja ohjausjärjestelmien hyväksyttävyydestä

Tutkielmassa tarkastellaan kuluttajien näkemyksiä ilmastonmuutoksesta ja ilmastovaikutusten seuranta- ja palautejärjestelmän hyväksyttävyydestä kulutuksen ohjauskeinona. 15 kuluttajaa kokeili kuukauden ajan kulutuksen ilmastovaikutusten seuranta- ja palautejärjestelmän demonstraatioversiota ja he osallistuivat kokeilun pohjalta aihepiiriä käsitelleeseen verkkokeskusteluun. Analysoin verkkokeskustelun aineistoa arkisen järkeilyn näkökulmasta tutkien kuluttajien ilmastonmuutokseen ja ympäristövastuullisuuteen liittyvää arkitietoa sekä palvelun hyväksyttävyyteen liittyviä heuristiikkoja. Ilmastonmuutoksen todettiin yleisesti olevan vielä melko abstrakti ja monitulkintainen ilmiö, minkä vuoksi kuluttajilla on vaikeuksia ymmärtää omien valintojensa konkreettista merkitystä ilmastonmuutoksen kannalta. Vaikka tietoa kulutuksen ilmastovaikutuksista on saatavilla paljon, niin erityisesti yritysten tuottama tieto koettiin ristiriitaiseksi ja osin epäluotettavaksi. Kuluttajat myös kritisoivat ilmastonmuutoskeskustelun tarjoamaa kapeaa näkemystä kulutuksen ympäristövaikutuksista. Hiilidioksidipäästöihin keskittymisen sijaan ympäristövaikutuksia tulisi kuluttajien mielestä tarkastella kokonaisuutena, josta ilmastovaikutukset muodostavat vain yhden osan. Tutkimukseen osallistuneiden kuluttajien kulutustottumuksiin ilmastonmuutos vaikutti eriasteisesti. Toisille ilmastonmuutoksesta oli muodostunut keskeinen omaa kulutusta ohjaava normi, kun taas toiset kertoivat pohtivansa ilmastovaikutuksia pääasiassa suurimpien hankintojen kohdalla. Ympäristövastuullisuudessa merkitykselliseksi koettiin tasapainon löytäminen ja henkilökohtainen tunne siitä, että kokee toimivansa oikein. Ilmasto- tai ympäristökysymyksiä punnitaan valinnoissa joustavasti yhdessä muiden tekijöiden kanssa. Vaikka kuluttajilla toisaalta olisi tietoa ja halua ottaa ilmasto- ja ympäristövaikutukset huomioon valinnoissaan, toimintaympäristö rajaa keskeisesti kuluttajien mahdollisuuksia toimia ympäristövastuullisesti. Tutkimus toi esille neljä kuluttajien käyttämää heuristiikkaa heidän pohtiessaan ilmastovaikutusten seuranta- ja palautejärjestelmän hyväksyttävyyden ehtoja ja toimivuutta ohjauskeinona. Ensinnäkin palvelun tulee olla käytettävyydeltään nopea ja vaivaton sekä tarjota tietoa havainnollisessa ja helposti ymmärrettävässä muodossa. Toiseksi palvelun tarjoaman tiedon tulee olla ehdottoman luotettavaa ja kuluttajien valintojen kannalta merkityksellistä siten, että palvelu ottaa huomioon erilaiset kuluttajat ja tiedontarpeet. Kolmanneksi palvelu tulee toteuttaa kokonaisvaltaisesti ja läpinäkyvästi useampien kaupparyhmittymien ja julkisten toimijoiden yhteistyönä. Neljänneksi toteutuksessa tulee huomioda palvelun kannustavuus ja kytkeytyminen muihin ohjauskeinoihin.

Integrated climatic impacts of forestry and fibre-based packaging

The purpose of this study was to examine the integrated climatic impacts of forestry and the use fibre-based packaging materials. The responsible use of forest resources plays an integral role in mitigating climate change. Forests offer three generic mitigation strategies; conservation, sequestration and substitution. By conserving carbon reservoirs, increasing the carbon sequestration in the forest or substituting fossil fuel intensive materials and energy, it is possible to lower the amount of carbon in the atmosphere through the use of forest resources. The Finnish forest industry consumed some 78 million m3 of wood in 2009, while total of 2.4 million tons of different packaging materials were consumed that same year in Finland. Nearly half of the domestically consumed packaging materials were wood-based. Globally the world packaging material market is valued worth annually some €400 billion, of which the fibre-based packaging materials account for 40 %. The methodology and the theoretical framework of this study are based on a stand-level, steady-state analysis of forestry and wood yields. The forest stand data used for this study were obtained from Metla, and consisted of 14 forest stands located in Southern and Central Finland. The forest growth and wood yields were first optimized with the help of Stand Management Assistant software, and then simulated in Motti for forest carbon pools. The basic idea was to examine the climatic impacts of fibre-based packaging material production and consumption through different forest management and end-use scenarios. Economically optimal forest management practices were chosen as the baseline (1) for the study. In the alternative scenarios, the amount of fibre-based packaging material on the market decreased from the baseline. The reduced pulpwood demand (RPD) scenario (2) follows economically optimal management practices under reduced pulpwood price conditions, while the sawlog scenario (3) also changed the product mix from packaging to sawnwood products. The energy scenario (4) examines the impacts of pulpwood demand shift from packaging to energy use. The final scenario follows the silvicultural guidelines developed by the Forestry Development Centre Tapio (5). The baseline forest and forest product carbon pools and the avoided emissions from wood use were compared to those under alternative forest management regimes and end-use scenarios. The comparison of the climatic impacts between scenarios gave an insight into the sustainability of fibre-based packaging materials, and the impacts of decreased material supply and substitution. The results show that the use of wood for fibre-based packaging purposes is favorable, when considering climate change mitigation aspects of forestry and wood use. Fibre-based packaging materials efficiently displace fossil carbon emissions by substituting more energy intensive materials, and they delay biogenic carbon re-emissions to the atmosphere for several months up to years. The RPD and the sawlog scenarios both fared well in the scenario comparison. These scenarios produced relatively more sawnwood, which can displace high amounts of emissions and has high carbon storing potential due to the long lifecycle. The results indicate the possibility that win-win scenarios exist by shifting production from pulpwood to sawlogs; on some of the stands in the RPD and sawlog scenarios, both carbon pools and avoided emissions increased from the baseline simultaneously. On the opposite, the shift from packaging material to energy use caused the carbon pools and the avoided emissions to diminish from the baseline. Hence the use of virgin fibres for energy purposes, rather than forest industry feedstock biomass, should be critically judged if optional to each other. Managing the stands according to the silvicultural guidelines developed by the Forestry Development Centre Tapio provided the least climatic benefits, showing considerably lower carbon pools and avoided emissions. This seems interesting and worth noting, as the guidelines are the current basis for the forest management practices in Finland.

Ethanol-dependent oxygen consumption and acetaldehyde formation during vanadyl oxidation by H2O2

Sequential addition of vanadyl sulfate to a phosphate-buffered solution of H2O2 released oxygen only after the second batch of vanadyl. Ethanol added to such reaction mixtures progressively decreased oxygen release and increased oxygen consumption during oxidation of vanadyl by H2O2. Inclusion of ethanol after any of the three batches of vanadyl resulted in varying amounts of oxygen consumption, a property also shared by other alcohols (methanol, propanol and octanol). On increasing the concentration of ethanol, vanadyl sulfate or H2O2, both oxygen consumption and acetaldehyde formation increased progressively. Formation of acetaldehyde decreased with increase in the ratio of vanadyl:H2O2 above 2:1 and was undetectable with ethanol at 0.1 mM. The reaction mixture which was acidic in the absence of phosphate buffer (pH 7.0), released oxygen immediately after the first addition of vanadyl and also in presence of ethanol soon after initial rapid consumption of oxygen, with no accompanying acetaldehyde formation. The results underscore the importance of some vanadium complexes formed during vanadyl oxidation in the accompanying oxygen-transfer reactions.

Analytical models for energy consumption in infrastructure WLAN STAs carrying TCP traffic

We develop analytical models for estimating the energy spent by stations (STAs) in infrastructure WLANs when performing TCP controlled file downloads. We focus on the energy spent in radio communication when the STAs are in the Continuously Active Mode (CAM), or in the static Power Save Mode (PSM). Our approach is to develop accurate models for obtaining the fraction of times the STA radios spend in idling, receiving and transmitting. We discuss two traffic models for each mode of operation: (i) each STA performs one large file download, and (ii) the STAs perform short file transfers. We evaluate the rate of STA energy expenditure with long file downloads, and show that static PSM is worse than just using CAM. For short file downloads we compute the number of file downloads that can be completed with given battery capacity, and show that PSM performs better than CAM for this case. We provide a validation of our analytical models using the NS-2 simulator.

Growth and consumption rates of the phase layers during interdiffusion in a diffusion couple with finite end member

The relations for the growth and consumption rates of a layer with finite thickness as an end member and the product phases in the interdiffusion zone are developed. We have used two different methodologies, the diffusion based and the physico-chemical approach to develop the same relations. We have shown that the diffusion based approach is rather straightforward; however, the physico-chemical approach is much more versatile than the other method. It was found that the position of the marker plane becomes vague in the second stage of the interdiffusion process in pure A thin layer/B couple, where two phases grow simultaneously.

C2 domain is responsible for targeting rice phosphoinositide specific phospholipase C

Phosphoinositide-specific phospholipase C (PLC) is involved in Ca2+ mediated signalling events that lead to altered cellular status. Using various sequence-analysis methods, we identified two conserved motifs in known PLC sequences. The identified motifs are located in the C2 domain of plant PLCs and are not found in any other protein. These motifs are specifically found in the Ca2+ binding loops and form adjoining beta strands. Further, we identified certain conserved residues that are highly distinct from corresponding residues of animal PLCs. The motifs reported here could be used to annotate plant-specific phospholipase C sequences. Furthermore, we demonstrated that the C2 domain alone is capable of targeting PLC to the membrane in response to a Ca2+ signal. We also showed that the binding event results from a change in the hydrophobicity of the C2 domain upon Ca2+ binding. Bioinformatic analyses revealed that all PLCs from Arabidopsis and rice lack a transmembrane domain, myristoylation and GPI-anchor protein modifications. Our bioinformatic study indicates that plant PLCs are located in the cytoplasm, the nucleus and the mitochondria. Our results suggest that there are no distinct isoforms of plant PLCs, as have been proposed to exist in the soluble and membrane associated fractions. The same isoform could potentially be present in both subcellular fractions, depending on the calcium level of the cytosol. Overall, these data suggest that the C2 domain of PLC plays a vital role in calcium signalling.

Decentralised carbon footprint analysis for opting climate change mitigation strategies in India

Carbon footprint (CF) refers to the total amount of carbon dioxide and its equivalents emitted due to various anthropogenic activities. Carbon emission and sequestration inventories have been reviewed sector-wise for all federal states in India to identify the sectors and regions responsible for carbon imbalances. This would help in implementing appropriate climate change mitigation and management strategies at disaggregated levels. Major sectors of carbon emissions in India are through electricity generation, transport, domestic energy consumption, industries and agriculture. A majority of carbon storage occurs in forest biomass and soil. This paper focuses on the statewise carbon emissions (CO2. CO and CH4), using region specific emission factors and statewise carbon sequestration capacity. The estimate shows that CO2, CO and CH4 emissions from India are 965.9, 22.5 and 16.9 Tg per year, respectively. Electricity generation contributes 35.5% of total CO2 emission, which is followed by the contribution from transport. Vehicular transport exclusively contributes 25.5% of total emission. The analysis shows that Maharashtra emits higher CO2, followed by Andhra Pradesh, Uttar Pradesh, Gujarat, Tamil Nadu and West Bengal. The carbon status, which is the ratio of annual carbon storage against carbon emission, for each federal state is computed. This shows that small states and union territories (UT) like Arunachal Pradesh, Mizoram and Andaman and Nicobar Islands, where carbon sequestration is higher due to good vegetation cover, have carbon status > 1. Annually, 7.35% of total carbon emissions get stored either in forest biomass or soil, out of which 34% is in Arunachal Pradesh, Madhya Pradesh, Chhattisgarh and Orissa. (C) 2012 Elsevier Ltd. All rights reserved.

Functional characterization, homology modeling and docking studies of beta-glucosidase responsible for bioactivation of cyanogenic hydroxynitrile glucosides from Leucaena leucocephala (subabul)

Glycosyl hydrolase family 1 beta-glucosidases are important enzymes that serve many diverse functions in plants including defense, whereby hydrolyzing the defensive compounds such as hydroxynitrile glucosides. A hydroxynitrile glucoside cleaving beta-glucosidase gene (Llbglu1) was isolated from Leucaena leucocephala, cloned into pET-28a (+) and expressed in E. coli BL21 (DE3) cells. The recombinant enzyme was purified by Ni-NTA affinity chromatography. The optimal temperature and pH for this beta-glucosidase were found to be 45 A degrees C and 4.8, respectively. The purified Llbglu1 enzyme hydrolyzed the synthetic glycosides, pNPGlucoside (pNPGlc) and pNPGalactoside (pNPGal). Also, the enzyme hydrolyzed amygdalin, a hydroxynitrile glycoside and a few of the tested flavonoid and isoflavonoid glucosides. The kinetic parameters K (m) and V (max) were found to be 38.59 mu M and 0.8237 mu M/mg/min for pNPGlc, whereas for pNPGal the values were observed as 1845 mu M and 0.1037 mu M/mg/min. In the present study, a three dimensional (3D) model of the Llbglu1 was built by MODELLER software to find out the substrate binding sites and the quality of the model was examined using the program PROCHEK. Docking studies indicated that conserved active site residues are Glu 199, Glu 413, His 153, Asn 198, Val 270, Asn 340, and Trp 462. Docking of rhodiocyanoside A with the modeled Llbglu1 resulted in a binding with free energy change (Delta G) of -5.52 kcal/mol on which basis rhodiocyanoside A could be considered as a potential substrate.

Minimum power consumption for drag reduction on a circular cylinder by tangential surface motion

We investigate the effect of a prescribed tangential velocity on the drag force on a circular cylinder in a spanwise uniform cross flow. Using a combination of theoretical and numerical techniques we make an attempt at determining the optimal tangential velocity profiles which will reduce the drag force acting on the cylindrical body while minimizing the net power consumption characterized through a non-dimensional power loss coefficient (C-PL). A striking conclusion of our analysis is that the tangential velocity associated with the potential flow, which completely suppresses the drag force, is not optimal for both small and large, but finite Reynolds number. When inertial effects are negligible (R e << 1), theoretical analysis based on two-dimensional Oseen equations gives us the optimal tangential velocity profile which leads to energetically efficient drag reduction. Furthermore, in the limit of zero Reynolds number (Re -> 0), minimum power loss is achieved for a tangential velocity profile corresponding to a shear-free perfect slip boundary. At finite Re, results from numerical simulations indicate that perfect slip is not optimum and a further reduction in drag can be achieved for reduced power consumption. A gradual increase in the strength of a tangential velocity which involves only the first reflectionally symmetric mode leads to a monotonic reduction in drag and eventual thrust production. Simulations reveal the existence of an optimal strength for which the power consumption attains a minima. At a Reynolds number of 100, minimum value of the power loss coefficient (C-PL = 0.37) is obtained when the maximum in tangential surface velocity is about one and a half times the free stream uniform velocity corresponding to a percentage drag reduction of approximately 77 %; C-PL = 0.42 and 0.50 for perfect slip and potential flow cases, respectively. Our results suggest that potential flow tangential velocity enables energetically efficient propulsion at all Reynolds numbers but optimal drag reduction only for Re -> infinity. The two-dimensional strategy of reducing drag while minimizing net power consumption is shown to be effective in three dimensions via numerical simulation of flow past an infinite circular cylinder at a Reynolds number of 300. Finally a strategy of reducing drag, suitable for practical implementation and amenable to experimental testing, through piecewise constant tangential velocities distributed along the cylinder periphery is proposed and analysed.

Quick, Decentralized, Energy-Efficient One-Shot Max Function Computation Using Timer-Based Selection

In several wireless sensor networks, it is of interest to determine the maximum of the sensor readings and identify the sensor responsible for it. We propose a novel, decentralized, scalable, energy-efficient, timer-based, one-shot max function computation (TMC) algorithm. In it, the sensor nodes do not transmit their readings in a centrally pre-defined sequence. Instead, the nodes are grouped into clusters, and computation occurs over two contention stages. First, the nodes in each cluster contend with each other using the timer scheme to transmit their reading to their cluster-heads. Thereafter, the cluster-heads use the timer scheme to transmit the highest sensor reading in their cluster to the fusion node. One new challenge is that the use of the timer scheme leads to collisions, which can make the algorithm fail. We optimize the algorithm to minimize the average time required to determine the maximum subject to a constraint on the probability that it fails to find the maximum. TMC significantly lowers average function computation time, average number of transmissions, and average energy consumption compared to approaches proposed in the literature.