Proposed Gulf of Alaska/Cook Inlet lease sale 88 : final environmental impact statement /

Item 603-G

Primary aromatics /

"October 1994."

Fuel oil journal.

Title from cover.

Octane requirement increase arising from the use of lead free fuel

Lead in petrol has been identified as a health hazard and attempts are being made to create a lead-free atmosphere. Through an intensive study a review is made of the various options available to the automobile and petroleum industry. The economic and atmospheric penalties coupled with automobile fuel consumption trends are calculated and presented in both graphical and tabulated form. Experimental measurements of carbon monoxide and hydrocarbon emissions are also presented for certain selected fuels. Reduction in CO and HC's with the employment of a three-way catalyst is also discussed. All tests were carried out on a Fiat 127A engine at wide open throttle and standard timing setting. A Froude dynamometer was used to vary engine speed. With the introduction of lead-free petrol, interest in combustion chamber deposits in spark ignition engines has ben renewed. These deposits cause octane requirement increase or rise in engine knock and decreased volumetric efficiency. The detrimental effect of the deposits has been attributed to the physical volume of the deposit and to changes in heat transfer. This study attempts to assess why leaded deposits, though often greater in mass and volume, yield relatively lower ORI when compared to lead-free deposits under identical operating conditions. This has been carried out by identifying the differences in the physical nature of the deposit and then through measurement of the thermal conductivity and permeability of the deposits. The measured thermal conductivity results are later used in a mathematical model to determine heat transfer rates and temperature variation across the engine wall and deposit. For the model, the walls of the combustion cylinder and top are assumed to be free of engine deposit, the major deposit being on the piston head. Seven different heat transfer equations are formulated describing heat flow at each part of the four stroke cycle, and the variation of cylinder wall area exposed to gas mixture is accounted for. The heat transfer equations are solved using numerical methods and temperature variations across the wall identified. Though the calculations have been carried out for one particular moment in the cycle, similar calculations are possible for every degree of the crank angle, and thus further information regarding location of maximum temperatures at every degree of the crank angle may also be determined. In conclusion, thermal conductivity values of leaded and lead-free deposits have been found. The fundamental concepts of a mathematical model with great potential have been formulated and it is hoped that with future work it may be used in a simulation for different engine construction materials and motor fuels, leading to better design of future prototype engines.

Project management system for a concurrent engineering framework

Completing projects faster than normal is always a challenge as it often demands many paradigm shifts. Globalization opportunities and competition from private sectors and multinationals are forcing the management of public sector organizations in India's petroleum industry to take various aggressive strategies to maintain profitability. These projects are required to be completed sooner than with a typical schedule to remain competitive, get faster return on investment and give longer project life.

Avaliação de floculante natural à base de Moringa oleifera no tratamento de água produzida na indústria do petróleo: aplicação da técnica combinada floculação/flotação

The principal effluent in the oil industry is the produced water, which is commonly associated to the produced oil. It presents a pronounced volume of production and it can be reflected on the environment and society, if its discharge is unappropriated. Therefore, it is indispensable a valuable careful to establish and maintain its management. The traditional treatment of produced water, usualy includes both tecniques, flocculation and flotation. At flocculation processes, there are traditional floculant agents that aren’t well specified by tecnichal information tables and still expensive. As for the flotation process, it’s the step in which is possible to separate the suspended particles in the effluent. The dissolved air flotation (DAF) is a technique that has been consolidating economically and environmentally, presenting great reliability when compared with other processes. The DAF is presented as a process widely used in various fields of water and wastewater treatment around the globe. In this regard, this study was aimed to evaluate the potential of an alternative natural flocculant agent based on Moringa oleifera to reduce the amount of oil and grease (TOG) in produced water from the oil industry by the method of flocculation/DAF. the natural flocculant agent was evaluated by its efficacy, as well as its efficiency when compared with two commercial flocculant agents normally used by the petroleum industry. The experiments were conducted following an experimental design and the overall efficiencies for all flocculants were treated through statistical calculation based on the use of STATISTICA software version 10.0. Therefore, contour surfaces were obtained from the experimental design and were interpreted in terms of the response variable removal efficiency TOG (total oil and greases). The plan still allowed to obtain mathematical models for calculating the response variable in the studied conditions. Commercial flocculants showed similar behavior, with an average overall efficiency of 90% for oil removal, however it is the economical analysis the decisive factor to choose one of these flocculant agents to the process. The natural alternative flocculant agent based on Moringa oleifera showed lower separation efficiency than those of commercials one (average 70%), on the other hand this flocculant causes less environmental impacts and it´s less expensive

O objetivo constitucional de desenvolvimento e o instrumento jurídico-normativo do conteúdo local na indústria petrolífera

On the petroleum industry, the State developed the Local Content police as a regulatory action to guarantee the preference of the national supply industry. Observing that, this paper will analyze the Local Content police aware of the constitutional goal of development as wright in the Constituição Federal de 1988. For it, will be used the hypothetical-deductive method for identifying the Local Content police as State strategy of development turn it in the object of critics in a dialectic way of thinking to in the final, present a conclusion about the police. As result was saw that the existent structure of the police at Brazil is inefficient, claiming for a rebuilt. For conclusion, is said that because of the inadequate construction of the Local Content police created inside of the Agência Nacional do Petróleo – ANP, the efficiency of the full potential of the police is been stopped, something that can be only corrected although a re-make of the police

Aplicação do Na2S2O8, H2O2 e ferro na remediação de solos (latossolo e areia destrófica) contaminados com diesel

Environmental liabilities from accidents in the retail petroleum industry, especially in urban areas, have represented a serious problem whose impact reaches the underground, people's health and even economic losses with the remediation process. In U.S.A. are estimated hundreds of billions of dollars invested in soil remediation processes. The results of the reports and investigative reports of liabilities in fuel stations distributed in the urban area of Natal-RN were used to estimate the local scenario of contamination. This database has been possible to determine the main contaminants (BTEX, PAHs, TOC), affected neighborhoods and types of potentially more impacted soils. Experiments were carried out in order to reverse contamination of this scenario, where the soil type was a factor in the planning, because it influences directly on the effectiveness of remediation techniques studied: Oxidation by hydrogen peroxide and oxidation by sodium persulphate. These oxidants are activated forming free radicals (HO•-, SO4 •-, HO2 • , O2 •-, S2O8 -2, etc) responsible for to mineralize the hydrocarbons and other organic compounds (releasing O2 e CO2). In the activation process, the ferrous ions (II) and ferric (III) were studied as well as hydrogen peroxide activation technique with sodium persulfate, the latter being presented the best efficiency among all the study, when activated with Fe+3. In addition to defining the most efficient technique, the aim of this study was to evaluate the influence of different soils among oxidative techniques, characterizing the effect of the concentration of these oxidants and also the concentration of the catalysts. Exists in most scenarios evaluated the presence of intrinsic total iron soil matrix. The so-called latosols present microaggregates reddish indicating the presence of these reactive species like iron and clayey aspect. The kinetic study was conducted by experimental design and monitoring of the percentage of total carbon (SSM-5000A) in the solid and liquid phases, knowing that 82.4% of the diesel molecule is carbon. Yet organic carbon and pH of liquid samples were analyzed for technical, characterizing the influence of soil type and its operating condition. The Fenton-like technique H2O2 e Fe+2 presented satisfactory oxidation, including sandy soil, but well below the best result. The sodium persulphate only activated with temperature, even in the most favorable soil, did not provide good efficiency. The best technique in the study had the concentration profile with 2,2x10- 1mol.L-1 of Na2S2O8 activated with 6,53x10-1mol.L-1 of H2O2 and 2,5x10-2 Fe3+mol.L-1 which reduced in less than a day 96 contamination in red soil, initially with 66,667 mg of diesel per kg of clean soil

Os limites constitucionais ao exercício de direito de patente e seus reflexos na indústria do petróleo, gás natural e biocombustíveis

This dissertation deals with the constitutional limits on the exercise of patent rights and its effects on the oil, natural gas and biofuels. Held with the support of ANP / PETROBRAS, It seeks to show how the law will limit the exercise of industrial property, based on a reinterpretation of private law by the constitutional development perspective . Today it is a fact that Petrobras, a Brazilian joint venture, has the latest technology in various sectors of the oil industry, and is one of the highest investments in developing new technologies. The overall objective of this thesis is to establish the relationship between the public interest of the Petroleum Industry, Natural Gas and Biofuels and constitutional limits to the free exercise of patent rights, then confirm or refute our hypothesis that Article 71 on Industrial Property Law is contrary to the existing objectives in Article 3 of the Constitution of the Federative Republic of Brazil. The research aims to examine the relevant aspects of the legal nature attributed to IPGN constitutionally confronting the constitutional limits on the free exercise of patent rights, with the purpose to outline the state of the performance limits in the regulation of the economy, in particular the application of feasibility limitations on the right of property in favor of national interest on the strategic energy industry. The aim is to confront the fundamental rights to property and economic development, against the public interest, limiting these first. As to the objectives, the research will be theoretical and descriptive and harvest of industrial property, respect the possible impact of regulatory standards and limiting the right of ownership in the oil industry. To establish how the state will mitigate the intellectual property right, we discuss, at first, a definition of public interest from the general theory of state and sovereign character in order to establish a new concept of national interest and popular interest, which will in turn the definition of our concept of public interest. In the second phase, will be addressed the issue of industrial property rights and how to will be free exercise thereof, in the constitutional sphere, infra, and demonstrating the use of industrial property rights with examples of market and IPGN . After situating the industrial property rights in the constitution and national legislation, establish their relationship with the national and regional development, will be addressed in this chapter in particular the patent law, as most usual form of intellectual property protection in IPGN. Used a study highlighting the number of patents in the area of the analyzed industry, demonstrating with hard data the importance of a sector for industrial development. The relationship between the social function of intellectual property and the constitutional objective of development was characterized to demonstrate the strategic nature of oil to Brazil in the national and international scene, and put into question the hypothesis of the research which provides that even with large investments the lack of legal certainty in the sector turns out not to have a considerable volume of investment as it could.

Influence of cutting parameters and tool wear on martensitic stainless steel surface integrity after a face milling process

Surface finish is one of the most relevant aspects of machining operations, since it is one of the principle methods to assess quality. Also, surface finish influences mechanical properties such as fatigue behavior, wear, corrosion, etc. The feed, the cutting speed, the cutting tool material, the workpiece material and the cutting tool wear are some of the most important factors that affects the surface roughness of the machined surface. Due to the importance of the martensitic 416 stainless steel in the petroleum industry, especially in valve parts and pump shafts, this material was selected to study the influence of the feed per tooth and cutting speed on tool wear and surface integrity. Also the influence of tool wear on surface roughness is analyzed. Results showed that high values of roughness are obtained when using low cutting speed and feed per tooth and by using these conditions tool wear decreases prolonging tool life. Copyright © 2009 by ASME.

(Table) Content of organic compounds in the bottom sediments of the Volga River estuary

Materials from different spheres of the Earth are ultimately delivered to bottom sediments, which serve as a natural recorder of the functioning of other spheres and originate as a result of the accumulation of their substances. Sedimentary material and species of river-transported elements are subjected to dramatic reworking in marginal filters, where river and sea waters are mixed. These processes are most important for the Caspian Sea, where runoffs of rivers (especially the Volga River) and the intense development and transportation of hydrocarbon fuel by tankers and pipelines (related to the coastal petroleum industry in the Sumgait and Baku ports, Apsheron Peninsula) are potential sources of hydrocarbon pollution. Previously obtained data showed that the total content of hydrocarbon fraction (i.e., the sum of aliphatic hydrocarbons (AHC) and polycyclic aromatic hydrocarbons (PAH)) in bottom sediments varied within 29-1820 µg/g. The content of petroleum hydrocarbons in the northeastern Caspian region varied from 0.052 to 34.09 µg/g with the maximum content in the Tengiz field. The content of six polyarenes in the Volga delta sediments was no more than 40 ng/g. To determine the recent HC pollution of bottom sediments and trends in the functioning of the Volga marginal filter, in summer of 2003 and 2004 we analyzed bottom sediments (58 samples) in the river waterway; Kirovsk channel; Bakhtemir and Ikryanoe branches; tributaries of the Kizan, Chagan, and other rivers; and the Caspian seashore.

Modelo de evaluación de pequeños proyectos en OCENSA

En la actualidad existen innumerables y diferentes metodologías para la evaluación de proyectos pequeños; sin embargo, la valoración y la selección de los mismos es compleja si se consideran sus propias necesidades y las de la empresa -- Por ello, en este estudio se pretende establecer una metodología estandarizada de evaluación de proyectos pequeños (menores de un millón de dólares americanos) que agrupe, desde el punto de vista estratégico, los intereses de la compañía Oleoducto Central S. A. (OCENSA) y las buenas prácticas de la industria petrolera -- Este formato incluye la información necesaria y relevante para que los diferentes niveles de la organización que generan y gestionan dichos proyectos puedan determinar su implementación de manera ágil y sencilla -- El objetivo de esta nueva metodología es garantizar la optimización de decisiones por el equipo directivo respecto a factores tales como su valor agregado a la compañía y su alineación con los objetivos y metas estratégicas de OCENSA, para que, además, le permitan a la empresa materializar su misión y su visión -- En otras palabras, este trabajo busca dotar a OCENSA de una herramienta que le permita mejorar su toma de decisiones de inversión para pequeños proyectos que no sean manejados a través de la Project Management Office (PMO) y de conformidad con la utilización del modelo de maduración de proyectos de OCENSA -- De acuerdo con los resultados obtenidos durante la puesta en marcha de dicha metodología, se encontró que durante la evaluación es necesario puntualizar en los objetivos y la planeación de pequeños proyectos y en la forma en que dichos objetivos se enmarcan en los objetivos estratégicos y requerimientos reales de OCENSA -- También es necesario detallar cómo evaluar parámetros estratégicos para la compañía, como la protección y la integridad de las personas, el cuidado del medio ambiente, el impacto y la inclusión de los intereses de las comunidades y los diferentes grupos de interés

Sensoriamento remoto a laser de aerossóis em uma refinaria de petróleo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

influência da adição de diferentes sais em pastas de cimento portland para cimentação de poços de petróleo

One of the great challenges at present time related with the materials area concerns of products and processes for use in petroleum industry, more precisely related to the Pre-salt area. Progresses were reached in the last years allowing the drilling of the salt layer, with the time reduction for drilling and larger success at the end. For the oil wells companies the preponderant factor is the technology, however, in spite of the progress, a series of challenges is still susceptible to solutions and one of them refers to the slurries preparation for cementing in those areas. Inside of this context, this study had for objective to analyze the influence of the salts NaCl, KCl, CaSO4 and MgSO4 in strength and chemical structure of the hydrated products. As methodology, they were prepared and analyzed cement slurries with varied concentrations of these salts that are commonly found in the saline formations. The salts concentrations used in formulations of the slurries were of 5%, 15% and 30%. The slurries were formulated with specific weight of 15,8 lb / gal and the cement used was Class G. Strength tests were accomplished in samples cured by 24 hours and 28 days. Also were realized crystallographic characterization (XRD) and morphologic (SEM). In agreement with the presented results, it is observed that the largest resistance values are attributed to the slurries with concentration of 15%. There was reduction of the strength values of the slurries formulated with concentration of 30%. Through the characterization microstructural it was possible to note the salts influence in the main cement hydrated products