High performance electrochromic devices based on anodized nanoporous Nb2O5

Despite the predictions, the true potential of Nb2O5 for electrochromic applications has yet to be fully realized. In this work, three-dimensional (3D) compact and well-ordered nanoporous Nb2O5 films are synthesized by the electrochemical anodization of niobium thin films. These films are formed using RF sputtering and then anodized in an electrolyte containing ethylene glycol, ammonium fluoride, and small water content (4%) at 50 °C which resulted in low embedded impurities within the structure. Characterization of the anodized films shows that a highly crystalline orthorhombic phase of Nb2O5 is obtained after annealing at 450 °C. The 3D structure provides a template consisting of a large concentration of active sites for ion intercalation, while also ensuring low scattering directional paths for electrons. These features enhance the coloration efficiency to 47.0 cm2 C?1 (at 550 nm) for a 500 nm thick film upon Li+ ion intercalation. Additionally, the Nb2O5 electrochromic device shows a high bleached state transparency and large optical modulation.

Voltammetric, spectroscopic, and microscopic investigations of electrocrystallized forms of semiconducting AgTCNQ (TCNQ=7,7,8,8-tetracyanoquinodimethane) exhibiting different morphologies and colors

Chemically synthesized AgTCNQ exists in two forms that differ in their morphologies (needles and microcrystals) and colors (red and blue). It is now shown that both forms exhibit essentially indistinguishable X-ray diffraction, spectroscopic, and thermochemical data, implying that they are not separate phases, as implied in some literature. Electrochemical reduction of TCNQ((MeCN)) in the presence of Ag+((MeCN)) generates both red and blue AgTCNQ. On glassy carbon, platinum, or indium tin oxide electrodes and at relatively positive deposition potentials, slow growth of high aspect ratio, red needle AgTCNQ crystals occurs. After longer times and at more negative deposition potentials, blue microcrystalline AgTCNQ thin films are favored. Blue AgTCNQ is postulated to be generated via reduction of a Ag+\[(TCNQ(center dot-))(TCNQ)]((MeCN)) intermediate. At even more negative potentials, Ag-(metal) formation inhibits further growth of AgTCNQ. On a gold electrode, Ag-(metal)) deposition occurs at more positive potentials than on the other electrode materials examined. However, surface plasmon resonance data indicate (hat a small potential region is available between the stripping of Ag-(metal)) and the oxidation of TCNQ(center dot-)(MeCN) back to TCNQ(MeCN) where AgTCNQ may form. AgTCNQ in both the red and blue forms also can be prepared electrochemically on a TCNQ((s)) modified electrode in -0.1 M AgNO3(aq) where deposition of Ag(m,,,I) onto the TCNQ((s)) crystals allows a charge transfer process to occur. However, the morphology formed in this solid-solid phase transformation is more difficult to control.

The pre-socialization of future journalists

While the role of university journalism education in the professionalization of journalists has been extensively debated, systematic and comparative studies of journalism students are still scarce. This paper reports the findings from a comparative study of journalism students in seven countries: Australia, Brazil, Chile, Mexico, Spain, Switzerland, and the United States. The data show a number of similarities, but also important differences between pre-professional cultures in journalism around the world. The findings are in line with recent conceptualizations of media systems, although some variations and particularities are observed at the country level. While students in all countries reject a loyal approach and favor a citizen-oriented role, they also do so to different extents. Brazilian and Chilean students believe in the citizen-oriented and watchdog roles, whereas their counterparts in Australia, Switzerland, and the United States favor the consumer-oriented approach to a greater extent. Mexican and Spanish students, on the other hand, while supporting the citizen-oriented role, reject the loyal role comparatively less than the rest of the countries.

Statistical modelling of district-level residential electricity use in NSW, Australia

Electricity network investment and asset management require accurate estimation of future demand in energy consumption within specified service areas. For this purpose, simple models are typically developed to predict future trends in electricity consumption using various methods and assumptions. This paper presents a statistical model to predict electricity consumption in the residential sector at the Census Collection District (CCD) level over the state of New South Wales, Australia, based on spatial building and household characteristics. Residential household demographic and building data from the Australian Bureau of Statistics (ABS) and actual electricity consumption data from electricity companies are merged for 74 % of the 12,000 CCDs in the state. Eighty percent of the merged dataset is randomly set aside to establish the model using regression analysis, and the remaining 20 % is used to independently test the accuracy of model prediction against actual consumption. In 90 % of the cases, the predicted consumption is shown to be within 5 kWh per dwelling per day from actual values, with an overall state accuracy of -1.15 %. Given a future scenario with a shift in climate zone and a growth in population, the model is used to identify the geographical or service areas that are most likely to have increased electricity consumption. Such geographical representation can be of great benefit when assessing alternatives to the centralised generation of energy; having such a model gives a quantifiable method to selecting the 'most' appropriate system when a review or upgrade of the network infrastructure is required.

Investigation of the effects of various types of wind turbine generators on power-system stability

It has become more and more demanding to investigate the impacts of wind farms on power system operation as ever-increasing penetration levels of wind power have the potential to bring about a series of dynamic stability problems for power systems. This paper undertakes such an investigation through investigating the small signal and transient stabilities of power systems that are separately integrated with three types of wind turbine generators (WTGs), namely the squirrel cage induction generator (SCIG), the doubly fed induction generator (DFIG), and the permanent magnet generator (PMG). To examine the effects of these WTGs on a power system with regard to its stability under different operating conditions, a selected synchronous generator (SG) of the well-known Western Electricity Coordinating Council (WECC three-unit nine-bus system and an eight-unit 24-bus system is replaced in turn by each type of WTG with the same capacity. The performances of the power system in response to the disturbances are then systematically compared. Specifically, the following comparisons are undertaken: (1) performances of the power system before and after the integration of the WTGs; and (2) performances of the power system and the associated consequences when the SCIG, DFIG, or PMG are separately connected to the system. These stability case studies utilize both eigenvalue analysis and dynamic time-domain simulation methods.

A multidimensional model of client success when engaging external consultants

Too often the relationship between client and external consultants is perceived as one of protagonist versus antogonist. Stories on dramatic, failed consultancies abound, as do related anecdotal quips. A contributing factor to many "apparently" failed consultancies is a poor appreciation by both the client and consultant of the client's true goals for the project and how to assess progress toward these goals. This paper presents and analyses a measurement model for assessing client success when engaging an external consultant. Three main areas of assessment are identified: (1) the consultant;s recommendations, (2) client learning, and (3) consultant performance. Engagement success is emperically measured along these dimensions through a series of case studies and a subsequent survey of clients and consultants involved in 85 computer-based information system selection projects. Validation fo the model constructs suggests the existence of six distinct and individually important dimensions of engagement success. both clients and consultants are encouraged to attend to these dimensions in pre-engagement proposal and selection processes, and post-engagement evaluation of outcomes.

Working together-apart : exploring the relationships between formal and informal care networks for people dying at home

Introduction Informal caring networks contribute significantly to end-of-life (EOL) care in the community. However, to ensure that these networks are sustainable, and unpaid carers are not exploited, primary carers need permission and practical assistance to gather networks together and negotiate the help they need. Our aim in this study was to develop an understanding of how formal and informal carers work together when care is being provided in a dying person's home. We were particularly interested in formal providers’ perceptions and knowledge of informal networks of care and in identifying barriers to the networks working together. Methods Qualitative methods, informed by an interpretive approach, were used. In February-July 2012, 10 focus groups were conducted in urban, regional, and rural Australia comprising 88 participants. Findings Our findings show that formal providers are aware, and supportive, of the vital role informal networks play in the care of the dying at home. A number of barriers to formal and informal networks working together more effectively were identified. In particular, we found that the Australian policy of health-promoting palliative is not substantially translating to practice. Conclusion Combinations of formal and informal caring networks are essential to support people and their primary carers. Formal service providers do little to establish, support, or maintain the informal networks although there is much goodwill and scope for them to do so. Further re-orientation towards a health-promoting palliative care and community capacity building approach is suggested.

'You can name her' : ritualised grieving by an Australian woman for her stillborn twin

The stillbirth of an Australian infant in the mid-20th Century was an event often left unacknowledged. Mothers of stillborn babies were often told to 'forget about it and have another baby.' Siblings of these babies were often not encouraged to discuss them, and were even left unaware of their birth and death. This paper explores this phenomenon in an Australian case study. When Nancy was born in 1937, her twin sister was stillborn. As was customary at that time, the deceased baby was buried unnamed in an unmarked plot without ceremony. Little was said of her thereafter. Seventy-three years later, Nancy finally undertook a number of activities with ritualised features that acknowledged, named, mourned and honoured her sister.

Circles in the surf : Australian masculinity, mortality and grief

This article examines the constructs of masculinity that are predominant in contemporary Australian society and their influence upon men's perception of their health and well-being. It questions the currency of ‘male stoicism’ at a time when changed perceptions of masculinity are emerging. In particular, it considers how these constructs are evidenced in men's embracing of human mortality and their public expressions of grief. The nature of men's health promotion is discussed and a platform for promoting healthy approaches to masculinity, mortality and grief is presented.

Surface functionalization on the thermal conductivity of graphene–polymer nanocomposites

Exploring thermal transport in graphene-polymer nanocomposite is significant to its applications with better thermal properties. Interfacial thermal conductance between graphene and polymer matrix plays a critical role in the improvement of thermal conductivity of graphene-polymer nanocomposite. Unfortunately, it is still challenging to understand the interfacial thermal transport between graphene nanofiller and polymer matrix at small material length scale. To this end, using non-equilibrium molecular dynamics simulations, we investigate the interfacial thermal conductance of graphene-polyethylene (PE) nanocomposite. The influence of functionalization with hydrocarbon chains on the interfacial thermal conductance of graphene-polymer nanocomposites was studied, taking into account of the effects of model size and thermal conductivity of graphene. An analytical model is also used to calculate the thermal conductivity of nanocomposite. The results are considered to contribute to development of new graphene-polymer nanocomposites with tailored thermal properties.

Re-reading the reading lesson : episodes in the history of reading pedagogy

Reading pedagogy is constantly an object of discussion and debate in contemporary policy and practice but is rarely a matter for historical inquiry. This paper reports from a recent study of the history of reading pedagogy in Australia and beyond. It focuses on a recurring figure in the historical record—the ‘reading lesson’. Presented as a distinctive trope, the reading lesson is traced in its regularity in and through the discourse of reading pedagogy, starting in 1930s Australia and moving back into 19th-century Europe, and with specific reference to the UK and the USA. Teaching reading is expressly identified as a moral project—something that, it can be argued, clearly continues into the present.

Competition Hertz : the culture and practice of car audio competitions

The present paper explores extreme car audio systems and the culture and practices that surround car audio competitions. I begin by examining whether, and how, car audio can be thought of as a 'music scene' and in what ways the culture and practice of car audio may fit within post-subcultural discourses. Following this, I offer a description of car audio competitions, revealing some of the practices that define this aspect of car audio scenes. In particular, I concentrate on sound pressure level (SPL) competitions and some of the interesting aspects of the SPL scene. Finally, I briefly examine how the powerful effects (and affects) of bass frequencies are an important part of the attraction of loud car audio systems and how car audio systems contribute to the territorializing of urban spaces.

Acoustic, electric and virtual noise : the cultural identity of the guitar

Guitar technology underwent significant changes in the 20th century in the move from acoustic to electric instruments. In the first part of the 21st century, the guitar continues to develop through its interaction with digital technologies. Such changes in guitar technology are usually grounded in what we might call the "cultural identity" of the instrument: that is, the various ways that the guitar is used to enact, influence and challenge sociocultural and musical discourses. Often, these different uses of the guitar can be seen to reflect a conflict between the changing concepts of "noise" and "musical sound."

Equal access to the opportunities available? Equity and diversity laws and policies in Australia

Australia has been populated for more than 40,000 years with Indigenous Australians joined by European settlers only 230 years ago. The first settlers consisted of convicts from more than 28 countries and members of the British army who arrived in 1788 to establish a British penal colony. Mass migration in the nineteenth century with one and a half million immigrants from Europe, principally from the United Kingdom and Ireland (Haines and Shlomowitz, 1992), established the continent as an Anglo society in the Pacific. In the twentieth century immigrants came from many European countries and in the latter decades from many parts of Asia and the Middle East (Collins, 1991, pp.10-13). In the 21st century Australia has an ethnically and culturally diverse population. The original Indigenous population of Australia accounts for approximately 460,000 or 2.5 per cent of the total population (ABS, 2006a). Estimates are that around 4.5m. persons in the population (close to 20 per cent), were born outside Australia with the majority of these arriving from Europe, principally the United Kingdom, and New Zealand (ABS, 2006b). Like many other countries, Australia has a legacy of discrimination and inequality in employment. Propelled by racist ideologies and the male breadwinner ideology, Indigenous Australians, and non-European immigrants, and women were barred from certain jobs and paid less for their work than any white male counterpart. These conditions were legally sanctioned through the industrial relations system and other laws in the nineteenth and first half of the twentieth century. Since the 1960s a dramatic change has occurred in social policy and national legislation and Australia today has an extensive array of laws which forbid employment discrimination on race, ethnicity, gender and many other characteristics, and other approaches which promote proactive organizational plans and actions to achieve equity in employment. This chapter outlines these developments.

Accurate measurement of the molecular thickness of thin organic shells on small inorganic cores using dynamic light scattering

Dynamic light scattering (DLS) has become a primary nanoparticle characterization technique with applications from materials characterization to biological and environmental detection. With the expansion in DLS use from homogeneous spheres to more complicated nanostructures, comes a decrease in accuracy. Much research has been performed to develop different diffusion models that account for the vastly different structures but little attention has been given to the effect on the light scattering properties in relation to DLS. In this work, small (core size < 5 nm) core-shell nanoparticles were used as a case study to measure the capping thickness of a layer of dodecanethiol (DDT) on Au and ZnO nanoparticles by DLS. We find that the DDT shell has very little effect on the scattering properties of the inorganic core and hence can be ignored to a first approximation. However, this results in conventional DLS analysis overestimating the hydrodynamic size in the volume and number weighted distributions. By introducing a simple correction formula that more accurately yields hydrodynamic size distributions a more precise determination of the molecular shell thickness is obtained. With this correction, the measured thickness of the DDT shell was found to be 7.3 ± 0.3 Å, much less than the extended chain length of 16 Å. This organic layer thickness suggests that on small nanoparticles, the DDT monolayer adopts a compact disordered structure rather than an open ordered structure on both ZnO and Au nanoparticle surfaces. These observations are in agreement with published molecular dynamics results.