Strategies to unblock the n-GaAs surface when electrodepositing Bi from acidic solutions

Bismuth ultra-thin films grown on n-GaAs electrodes via electrodeposition are porous due to a blockade of the electrode surface caused by adsorbed hydrogen when using acidic electrolytes. In this study, we discuss the existence of two sources of hydrogen adsorption and we propose different routes to unblock the n-GaAs surface in order to improve Bi films compactness. Firstly, we demonstrate that increasing the electrolyte temperature provides compact yet polycrystalline Bi films. Cyclic voltammetry scans indicate that this low crystal quality might be a result of the incorporation of Bi hydroxides within the Bi film as a result of the temperature increase. Secondly, we have illuminated the semiconductor surface to take advantage of photogenerated holes. These photocarriers oxidize the adsorbed hydrogen unblocking the surface, but also create pits at the substrate surface that degrade the Bi/GaAs interface and prevent an epitaxial growth. Finally, we show that performing a cyclic voltammetry scan before electrodeposition enables the growth of compact Bi ultra-thin films of high crystallinity on semiconductor substrates with a doping level low enough to perform transport measurements.

Spin depolarization in the transport of holes across GaxMn1−xAs∕GayAl1−yAs∕p-GaAs

We study the spin polarization of tunneling holes injected from ferromagnetic GaMnAs into a p-doped semiconductor through a tunneling barrier. We find that spin-orbit interaction in the barrier and in the drain limits severely spin injection. Spin depolarization is stronger when the magnetization is parallel to the current than when it is perpendicular to it.

Exciton beats in GaAs quantum wells: bosonic representation and collective effects

We discuss light–heavy hole beats observed in transient optical experiments in GaAs quantum wells in terms of a free-boson coherent state model. This approach is compared with descriptions based on few-level representations. Results lead to an interpretation of the beats as due to classical electromagnetic interference. The boson picture correctly describes photon excitation of extended states and accounts for experiments involving coherent control of the exciton density and Rayleigh scattering beating.

Development of high efficiency GaAs polycrystal solar cells.

"Work Performed Under Contract No. ET-78-C-03-1712."

Enhanced optical properties of the GaAsN/GaAs quantum-well structure by the insertion of InAs monolayers

Microstructural and optical properties of InAs-inserted and reference single GaAsN/GaAs quantum-well (QW) structures grown by metalorganic chemical vapor deposition were investigated using cross-sectional transmission electron microscopy and photoluminescence (PL). Significant enhancement of PL intensity and a blueshift of PL emission were observed from the InAs-inserted GaAsN/GaAs QW structure, compared with the single GaAsN/GaAs QW structure. Strain compensation and In-induced reduction of N incorporation are suggested to be two major factors affecting the optical properties. (C) 2004 American Institute of Physics.

Structural characteristics of GaSB / GaAs nanowire heterostructures grown by metal-organic chemical vapor deposition

Highly lattice mismatched (7.8%) GaAs/GaSb nanowire heterostructures were grown by metal-organic chemical vapor deposition and their detailed structural characteristics were determined by electron microscopy. The facts that (i) no defects have been found in GaSb and its interfaces with GaAs and (ii) the lattice mismatch between GaSb/GaAs was fully relaxed suggest that the growth of GaSb nanowires is purely governed by the thermodynamics. The authors believe that the low growth rate of GaSb nanowires leads to the equilibrium growth. (c) 2006 American Institute of Physics.

Growth mechanism of truncated triangular GaAs nanowires

During the growth of GaAs nanowires on the {111}B GaAs substrate, truncated triangular GaAs nanowires were commonly observed in the bottom region of nanowires. Through detailed structural analysis by electron microscopy, we have determined the growth mechanism of truncated triangular GaAs nanowires.

A UTILIZAÇÃO DO LASER DE BAIXA INTENSIDADE NA MOVIMENTAÇÃO DENTÁRIA E NA SENSIBILIDADE DOLOROSA APÓS APLICAÇÃO DE FORÇA ORTODÔNTICA

O presente estudo objetivou avaliar a eficácia do Laser de Baixa Intensidade (LBI) na aceleração da movimentação dentária e na diminuição da dor frente à aplicação de força ortodôntica. A amostra foi composta por 19 pacientes, sendo doze do sexo feminino e sete do sexo masculino, com idade inicial média de 14,69 anos, todos com indicação para extrações de primeiros pré-molares. Destes, 66 caninos foram submetidos à retração inicial, sendo que 33 receberam aplicação de laser e 33 foram considerados controle. Utilizou-se o Laser de Baixa Intensidade de arseneto de gálio e alumínio, com comprimento de onda de 780nm, na dosimetria de 40mW;10J/cm2;10s/ponto, aplicado apenas uma vez ao mês em dez pontos, sendo cinco por vestibular e cinco por lingual/palatino. Modelos de gesso foram confeccionados durante todos os meses de retração dos caninos, que teve duração de quatro meses, sendo, posteriormente, digitalizados para se mensurar a quantidade de movimentação de um lado em relação ao outro, utilizando-se como referência as papilas incisivas. Para a avaliação da dor experimentada pelos pacientes, os mesmos foram orientados a preencher uma escala analógica visual (VAS) que variava de 0 a 10 , em que zero significava nenhuma dor e dez significava dor insuportável, nos intervalos de 12, 24, 48 e 72 horas após a aplicação da força ortodôntica. Foi mensurado o apinhamento de todas as hemiarcadas dos pacientes na fase inicial, medindo-se a distância entre os pontos de contato de cada dente. Para a verificação do padrão de normalidade, empregou-se o teste de Kolmogorov-Smirnov, sendo que para comparar o lado irradiado com o lado não irradiado foi utilizado o teste t pareado, exceto para a variável razão caninos/molares , analisada pelo teste não paramétrico de Wilcoxon (p<0,05). Os resultados mostraram que em relação ao apinhamento dentário, os lados irradiado e não irradiado apresentaram-se compatíveis. Além disso, não houve diferença estatisticamente significante entre a quantidade de retração dos caninos irradiados comparados aos não irradiados, o mesmo acontecendo com a sensibilidade dolorosa experimentada pelos pacientes. Concluiu-se assim que o LBI na dosimetria e forma como foi utilizado não foi eficiente na aceleração da movimentação dentária nem na redução da dor experimentada pelos pacientes frente às forças ortodônticas.

Optical autocorrelator that uses a surface-emitting second-harmonic generator on (211)B GaAs

An optical autocorrelator grown on a (211)B GaAs substrate that uses visible surface-emitted second-harmonic generation is demonstrated. The (211)B orientation needs TE mode excitation only, thus eliminating the problem of the beating between the TE and TM modes that is required for (100)-grown devices; it also has the advantage of giving higher upconversion efficiency than (111) growth. Values of waveguide loss and the difference in the effective refractive index between the TE(0) and TE(1) modes were also obtained from the autocorrelation experiment.

Computer simulation of radio-frequency methane/hydrogen plasmas and their interaction with GaAs Surfaces

The following thesis describes the computer modelling of radio frequency capacitively coupled methane/hydrogen plasmas and the consequences for the reactive ion etching of (100) GaAs surfaces. In addition a range of etching experiments was undertaken over a matrix of pressure, power and methane concentration. The resulting surfaces were investigated using X-ray photoelectron spectroscopy and the results were discussed in terms of physical and chemical models of particle/surface interactions in addition to the predictions for energies, angles and relative fluxes to the substrate of the various plasma species. The model consisted of a Monte Carlo code which followed electrons and ions through the plasma and sheath potentials whilst taking account of collisions with background neutral gas molecules. The ionisation profile output from the electron module was used as input for the ionic module. Momentum scattering interactions of ions with gas molecules were investigated via different models and compared against results given by quantum mechanical code. The interactions were treated as central potential scattering events and the resulting neutral cascades were followed. The resulting predictions for ion energies at the cathode compared well to experimental ion energy distributions and this verified the particular form of the electrical potentials used and their applicability in the particular geometry plasma cell used in the etching experiments. The final code was used to investigate the effect of external plasma parameters on the mass distribution, energy and angles of all species impingent on the electrodes. Comparisons of electron energies in the plasma also agreed favourably with measurements made using a Langmuir electric probe. The surface analysis showed the surfaces all to be depleted in arsenic due to its preferential removal and the resultant Ga:As ratio in the surface was found to be directly linked to the etch rate. The etch rate was determined by the methane flux which was predicted by the code.

Surface:plasma interactions in GaAs subjected to capacitively coupled RF plasmas

Surface compositional changes in GaAs due to RF plasmas of different gases have been investigated by XPS and etch rates were measured using AFM. Angular Resolved XPS (ARXPS) was also employed for depth analysis of the composition of the surface layers. An important role in this study was determination of oxide thickness using XPS data. The study of surface - plasma interaction was undertaken by correlating results of surface analysis with plasma diagnosis. Different experiments were designed to accurately measure the BEs associated with the Ga 3d, Ga 2P3/2 and LMM peaks using XPS analysis and propose identification in terms of the oxides of GaAs. Along with GaAs wafers, some reference compounds such as metallic Ga and Ga2O3 powder were used. A separate study aiming the identification of the GaAs surface oxides formed on the GaAs surface during and after plasma processing was undertaken. Surface compositional changes after plasma treatment, prior to surface analysis are considered, with particular reference to the oxides formed in the air on the activated surface. Samples exposed to ambient air for different periods of time and also to pure oxygen were analysed. Models of surface processes were proposed for explanation of the stoichiometry changes observed with the inert and reactive plasmas used. In order to help with the understanding of the mechanisms responsible for surface effects during plasma treatment, computer simulation using SRIM code was also undertaken. Based on simulation and experimental results, models of surface phenomena are proposed. Discussion of the experimental and simulated results is made in accordance with current theories and published results of different authors. The experimental errors introduced by impurities and also by data acquisition and processing are also evaluated.

Faster radial strain relaxation in InAs-GaAs core-shell heterowires

The structure of wurtzite and zinc blende InAs-GaAs (001) core-shell nanowires grown by molecular beam epitaxy on GaAs (001) substrates has been investigated by transmission electron microscopy. Heterowires with InAs core radii exceeding 11 nm, strain relax through the generation of misfit dislocations, given a GaAs shell thickness greater than 2.5 nm. Strain relaxation is larger in radial directions than axial, particularly for shell thicknesses greater than 5.0 nm, consistent with molecular statics calculations that predict a large shear stress concentration at each interface corner. © 2012 American Institute of Physics.

Gallium-transferrin binding in treated and untreated Parkinson's disease

The binding of gallium (Ga) to transferrin (Tf) was studied in plasma from control patients, in patients with untreated Parkinson's disease (PD) and in patients with PD treated either with levodopa (L-dopa) alone or in combination with selegiline. Mean percentage Ga-Tf binding was significantly reduced in untreated and treated PD compared with controls. Binding, however, was significantly greater in treated than in untreated patients. There was no difference in binding between patients treated with L-dopa alone and those treated with L-dopa and selegiline. The data support the hypothesis that oxidation reactions may be of pathogenic significance in PD.